Cannot use the output VGA on my Satellite A100
I have laptop Satellite A100 and when I use the my monitor VGA output announcement there is NO signal. I checked my monitor and it does not work.
This that I would like to know because there is no my VGA output signal does that also mean that the * S-video * will not not a signal?
I do not have a S-Video > VGA adapter as far trying to save the cost of buying one if it doesn't...
I don't really know what you're doing wrong?
Is your laptop connected with VGA cable or an adapter on your laptop VGA port?
When the monitor is connected please use FN + F5 key combination to switch between an LCD display and connected monitor.
It work?
Tags: Toshiba
Similar Questions
-
Cannot use the webcam with chat programs - Satellite A200-AH7 Vista
Satellite A200-AH7/Vista Home Premim/Chicony USB 2.0 built in webcam
I can't understand how get the audio works with built in chicony webcam when in a chat program or any program for that matter. I can record audio and reading later, but this isn't what I want to do. It's probably just something stupid that miss me... but any help would sure be appreciated... I tried with Windows Live and Yahoo messenger, and so far all I can do is wave to people LOL. I was never able to get it to work... any ideas?
Today I bought a Logitech Quickcam for notebooks in case the problem is with the construction in camera. I don't want to install it unless absolutely necessary and think I would need to uninstall the Chicony to make it work... someone can point me in the right direction?
I just want to be able to talk to my grandchildren...
Thanks in advance,
SueHello
He is a Canadian for Toshiba laptop model.
Please see the Toshiba Canada Web site to get the right webcam software:http://209.167.114.38/support/TechSupport/ln_TechSupport.asp
First remove the old webcam software. Reboot the laptop. Clean the registry and the system using the CCleaner (it of free). Reboot the laptop again one and then install the new software of webcam!
Welcome them
-
Cannot use the output of javascript function in the scriptlet
Hi I am using the listboxes in a jsp page. There are 2 drop-down lists.
Once I click on a particular value in listbox1, the listbox2 is filled according to value in listbox1.
which means I want to use the value in the list box as parameter 1 to fill the listbox2.
Note: the values to listbox1 are filled with the values from the table to the oracle database.
Here is the code I tried to frame.
I have a listbox with the following code 1
< select size = "5" cols = "30" name = "view_label" onclick = "testSelect (this.form)" > "
< SCRIPT >
function testSelect (form)
{
var multipleVar = form.view_label.options [form.view_label.selectedIndex] .value
If (form.comments.value == "")
{
Form.comments.Value = multipleVar + "\n";
}
ElseIf (form.comments.value! = "")
{
var insertedMultipleVar = form.comments.value;
Form.comments.Value = insertedMultipleVar + multipleVar + '\n '.
Form.comments.Value = multipleVar
}
}
< /script >
It's listbox 2 which is based on option 1 OnClick of the listbox
< select size = "5" cols = "30" name = "applications" >
< %
ResultSet rsetlovp = lovbean.getAllQueries (/ * Function testSelect output * /);
While (rsetlovp.next ())
{
out.println ("< option value =" + rsetlovp.getString ("query_position") + ">" +)
rsetlovp.getString("query_position") + ' < / option > ");
} % >
< / select >
How can I switch the output of javascript function to getAllQueries() method?
Please can someone help on this...?
Thank you
Ramakrishna
Published by: user1064313 on July 22, 2009 05:33
Published by: user1064313 on July 22, 2009 05:42It's really a bit difficult to answer your question without a little more information. What version of JDeveloper are you using? What is your technology environment?
In the case of JDeveloper 11 g + +, with the Fusion technology stack, you can use a technique similar to that described here:
http://Groundside.com/blog/GrantRonald.php?title=jdeveloper_11_business_services_cascadin&more=1&c=1&TB=1&pb=1JDeveloper 10.1.3 with the default Web technology stack, check here:
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#62If, as looks, it is really a question about generic (no JSF) JSPs, you could actually have a little more success on a generic JSP forum - using scriptlets was not really practical copies within JDev since... Well, since JSTL became available, really. It was a number of years.
As I said, there is really no direct way to use Javascript in a scriptlet - unless you mean something like store the output of Javascript in a hidden field and using the value in a scriptlet on the next request. But at the point where Javascript executes, a scriptlet for the current request will be already performed.
-
Cannot use the functions F1-12 on my Satellite C55 - A - 19 K
Hello
Satellite C55 - A - 19 K have a keyboard drivers?
I cannot use the functions F1-12 and can not get the wireless since it s on the keyboard...
Any 1 can help please?This function is not controlled by the driver keyboard, but with utilities and tools specific to Toshiba.
What operating system do you use? -
Extractdion failed, cannot delete the output file
I have Windows Pro 8, 64-bit, 8G of RAM.
When you try to install the drivers of HP, I get the following error. Extraction failed, cannot delete the output file. I get the same error using the download I used to use with Win 7 and a new download from the HP Web site. I have also tried to run the program as an adminitratior and get the same error message.
I managed to do the work. I found on my C drive the location of the files when extracted and run the installation program from there.
-
I wanted to just kind of get a notice of some people here. I have two main screws the first is a data acquisition system that displays 99 different sensors and which feeds on these data in a table. The second is a real-time processing system that is designed to take the painting and do many calculations. The two output data from screw at the front that I want to see, so I don't want to use just as a Subvi.
Is there a simple way to run two screws, using the output of the data acquisition system to power the processor so that you can easily see the signs before two screws? I had thought to simply copy the code from the processor in real-time in the DAQ VI, but I fear that the VI resulting will be very large and unsightly.
On a side note, I'm more thinking about this? I apologize if this is a stupid question, it has been a long week... aaaand it's Wednesday.
Look at the Architecture of producer/consumer. It will be a good starting point, even if you find that you need to change. When performing data acquisition and processing of tasks in parallel loops, they can both run simultaneously. Both can feed data to the main draw of the VI.
I'd probably use three loops with the third being the user interface only. All that must be displayed to the user is sent to the GUI of the acquisition of data or processing loop loops and commands or entered by users are returned in these loops, probably through queues. The wall of the VI of data acquisition and processing VI are never displayed to the user. Especially the treatment, because it runs on a system in real-time, should avoid synchronization issues that can present a graphical interface.
Lynn
-
Using the output with 6009 or 6216 possible buffer?
Hello
I have a USB6009 and a USB6216. I need to generate a signal by using the analog output and I would use the output buffer. My questions are:
-The USB6009 has an output buffer? I always get an error, but I know from experience that this device is very limited, so I wonder if they have not only an output buffer... (Programs in input buffer are not a problem at all).
-J' took the USB6216 and I tried the example WfmGenUp.c downloaded from somewhere in the area of the developer (sorry I lost the link but fix the code) but I am not all analog output signals and after you press ENTER to stop the program (depending on the show) I get this error message:
NO MORTALS RUN - TIME ERROR: 'WfmGenUp.c', line 113, col 9, id thread 0x0000088C: DAQmxStopTask function: (is-200016 return value [0xfffcf2b0]). Measurements: On-board memory precision passing. Due to the limitations of system and/or the bandwidth of the bus, the driver could not write data to the device fast enough to track the rate of output of the device. Reduce your sampling rate, change the method of transfer of data (from interruptions on DMA), use a product with more on-board memory or reduce the number of programs that your computer runs simultaneously. Task name: _unnamedTask<0> Code of State:-200016
I don't know if the problem is just that the 6216 does not support the output buffering or the other...
-So, if the output control is not supported by 6009 or 6216 what would be the best way to constantly generate signals to 100 s/s?
Thank you very much
Kristel
Hi Ryan,
the USB-6009 case has 150 s/s softwaretimed AO, so you won´t be able to use AO stamped with the module.
The USB-6216 supported in the analog output buffer, just follow the recommendations that the driver gives you,
for example by reducing the sampling frequency, if there is an overflow memory due to the limitations of system and/or the bandwidth of the bus.
Experiment with the parameters and the basic to see in what range of sampling it works.
You can find appropriate examples
ANSI C:
C:\Dokumente und All Anwendungsdaten Users\Dokumente\National Instruments\NI - DAQ\Beispiele\DAQmx C\Analog Out\Generate Voltage\Cont Gen Volt Wfm - Int Clk ANSI
LabWindows CVI:
C:\Dokumente und Users\Dokumente\National Instruments\CVI\samples\DAQmx\Analog Out\Generate Voltage\Cont Gen Volt Wfm - Int Clk Anwendungsdaten All
0> -
Counter trigger using the output of another counter
Hello
I want to configure my USB-6221 Panel in the next mode
1 Counter0: Generates impulses in continuous mode.
2 Counter1: Fires by the impulse of Counter0 (rising edge) and generates a train of 128 pulses with a certain frequency.
3 DigitalInput: Using the impulses generated by the meter read 128 digital input values
Cnt0: _____|______________|______________|______________|_________
Cnt1: ______|||||||||||| _________|||||||||||| _________|||||||||||| __________|||||||||||| ___
DigIn:___xxxxx___xxxxx___xxxxx___xxxxx___
The problem is: I can't seem to trigger the Cnt1 using the output of Cnt0.
If I connect using the Cnt0InternalOutput: I get the error: this connection is not supported by the Board of Directors
If I connect the trigger for a PFI (e.g. PFI5) I get the error: some resources used Cnt0 (I see no reason why by ok).
I tried for awhile to do in a different way (I completely mixed my vi) but I did not.
If anyone has any suggestions please shear them.
Thank you
Paul
Ignore my previous post.
A mistake is this sample clock: finished sample doesn't seem to work with shutter release in this configuration.
In any case, I found a way to get around and reach my final goal (the object) with a bath other counters and configuration of digital input.
-
Users on the network cannot use the files after upgrade to Windows 10
When I switch to win 10 people on the network cannot use the files on my computer
Hello
Thanks for posting your query on the Microsoft Community.
With the description, I understand that you have problems with network connectivity and access files on network on your Windows 7 machine. I will certainly help you to the query.
I would be grateful if you could help me with more information to better understand the problem and a solution:
1 is this computer connected to a network domain or home?
2. what exactly happens when users on the network try to use/access files on this computer? Do they get an error message/code?
In the meantime, I suggest you refer to the below mentioned thread and check if this is useful:
Hope this information is useful. Please write us back with the required information for assistance, we will be happy to help you.
-
Original title: I can't use my question mark (rises like a capital E with accent French and cannot use the quotes)
I'm having a problem from time to time with my ability to use marks quotaion, brands etc. How can I treat it DEFINITIVELY the question.
Thank you
Hi golfnut11,
1. you are using a laptop?
2. you remember to make changes to the computer priro to this question?
Step 1:
If you use a laptop, check if the FN key is enabled. If so, then try to turn it off and check.
Step 2:
You can also try to check the keyboard on the screen and if the problem occurs or not.
Check out the link:
Type without using the keyboard (on-screen keyboard)
http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard
If you use a Microsoft keyboard, you can also consult the following article:
Troubleshoot wired keyboards that do not or only the erroneous characters category
http://support.Microsoft.com/kb/258826Hope this information is useful.
-
My computer (win 7) does not detect the new headset.
Cannot use the microphone while I am on Skype.I Can hear music, but I can't record any sound, for the most part the microphone does not work as it should. (Which is terrible for a MS product)Can not see the device on the list of Audio material.Help?Thanks in advanceOriginal title: lx1000 lifechatNot sure, but maybe - http://support.microsoft.com/kb/935748/en-gb
It will be useful.
-
For some reason, when I try to click on the Start button, it disappears. I tried all day to dissable addons that sort, but it ended up doing another way. I have restarted computor, but the Start button, always goes away until I can click on it. Everyone comes through this before please?
Hello BeverleyMacKenzie,
Thank you for the question!
I'm sorry to know that have problems you with start button. As I understand it, you cannot use the button start effectively.
Method 1: perform the scan SFC (System File Checker) and see if the problem occurs.
Method 2: use the Microsoft Safety Scanner in full scan mode and to remove all the threats that is not detected by it and see if the problem persists.
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.
Answer to us if you have problems with start button or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
cannot use the CD to install the printer. Series of HP Office Pro 85 A909g
Cannot use the CD-Rom installation disc to install the printer. Series of HP Office Pro 8500 has 909 g. I need to know if I can download what I need to do my printer works.
Visit the hp product page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3752459
Select the operating system of the computer and download the driver software. -
CANNOT OPEN OUTPUT FILE, CANNOT DELETE THE OUTPUT FILE
Try to patch effect for Deskjet 722C for Windows 7. Not able to replace the existing .dll files. Error messages: could not open the output file, cannot delete the output file.
Thank you for your response. I found these solutions but still had problems.
However, I was able to bypass Windows with a DOS command that did the trick.
C:\Windows\System32>copy C:\temp\hpvdb720.dll C:\windows\system32\spool\drivers\x64\3
-
Cannot use the timecode source in my project?
I do not properly understand that Premiere Pro that you cannot use the timecode source in your project? I know that I can change the BEGINNING of t - c in a clip, but I need to read it off the camera (XDCAM EX3)? And if indeed I can't use source t/c - WHY NOT? My files audio syc'ed must be Sync manually!
Thanks for a reply Adobe
You can read the timecode source of your clips in several locations within Premiere Pro.
If you load the clip from the source to the source monitor, don't you see the time code of the displayed item?
Where you are waiting to see the timecode and don't see it?
MtD
Maybe you are looking for
-
Apple's music has hidden my music on my iPhone.
I got a trial of Apple's music and found that for my choice of praise and Gospel music that he kept to push myself listening to rock, pop, and that it has not respected my choice. I always use Spotify and pay student - music Apple is too expensive an
-
Pregnant problem Bluetooth on Windows 10
Hello just got the new Mac Book Pro 15. I'm PC user, so Windows is preferred to the OS. Everything works fine except Bluetooth speakers. The sound on the speakers, cracking, intermittent. Looks like buffer overflow, as the connection speed is slow. E
-
Redirection in blackberry problem
Hi all We are developing an application that involves a communication server. Download us the data from the server and storage in the database and display to the user. the problem is, the server redirects the request to another server and am getting
-
Hello I have a code like this ------------- class HellWorldScreen extends form {}...public HellWorldScreen (string pageTitle, String btnLabel, track int, hell obj) {} .... Tattoo = new MyButton (btnLabel, track, obj); Add (myButt); } } ... private cl
-
Just bought a new HP Pavilion 500-217. Sellers said there would be a word processor, but I can't find one. What should I buy Miscrosoft Word?