Cannot use the webcam with chat programs - Satellite A200-AH7 Vista

Similar Questions

• When I try to use the webcam with Skype it blocks Skype and said "Skype has stopped working, windows is checking for a solution."

  Original title: lifecam 3000 and Skype does not?

  Hello, I tried the two 5.5 beta and 5.3. When I try to use the webcam with Skype it blocks Skype and says "Skype has stopped working windows is checking for a solution." I have windows update connection bars 4/5 drivers and my computer ==> http://www.newegg.com/Product/Product.aspx?Item=N82E16883103361 help is appreciated, thanks

  Hello, I had just fixed yesterday. I deleted the drivers and programs that accompanies it, it ends up being the lifecam software that comes with it interfering with Skype, thanks to all who help :)

• Satellite A300-22F - face recognition cannot use the webcam on Vista 64

  Hello everyone,

  I have a big problem with the recognition of face and my Windows Vista operating system tool.

  Yesterday I installed Windows Vista 64 bit on my new laptop Sat. A300-22F as him preinstalled
  version of Windows was only 32 and I've got 4gig of RAM.

  Thus, all the drivers are installed and everything works. The driver for the webcam with the webcam program works, too.
  But when I run the facial recognition tool, an error that the webcam cannot be initialized or that
  the webcam is in use and cannot be used with the program now.

  So, no program is using the webcam. The webcam works with other tools. And in the settings of the tool face
  are the webcam, but always available, without work.

  Someone at - it an idea?

  I have the drivers of webcam directly from Toshiba.

  Thank you.

  Greetings.

  Hello!

  Start you have programs that use the camera as Skpye or MSN?
  Check it!

  You are using the latest version of the tools and drivers Toshiba? Search on the Toshiba site for an update.
  In addition, I would try to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Cannot use the webcam on my Satellite Pro A200

  I have the Satellite Pro A200 series.

  My warranty (with clips) runs out on August 7. I had probs with my webcam since I bought this laptop two years ago. I keep says it's a matter of 'software' and not covered by the warranty. I did everything what I said to do... reformatted the hard drive three times, etc., etc. In any case... I use only this laptop when I go... I checked the other day and that's the problem, now, I recovered it. It works, I can see on the webcam, but no one can see me.

  I get this message that says "turn on camera"... but there is no way to turn it on and just what I do does not work. Is it not now a HARDWARE problem, with a built-in webcam If the camera does not illuminate? So it seems Staples should look like it. I'm back this week for another chance with them.

  But does anyone have any suggestions?
  Thank you.

  Try this

  * Download driver Chicony Webcam drivers from Toshiba Web site section was updated. If you can't find an updated driver, try a new driver of another model of Toshiba.
  * Install the Service Pack 1 of Vista, or Vista Hotfix KB934374: http://support.microsoft.com/kb/934374 (KB934374 is included in SP1)
  * Update your e-mail software (MSN/Yahoo Messenger, etc...)
  * If you have another program that can use the webcam (e.g. Skype), make sure that they are completely closed and not, sitting in the system tray.
  * Try to close the bar Assistant camera on the left side of the office.
  * To stop the Camera Assistant software from running at startup, run Regedit and delete HKLM\Software\Microsoft\Windows\CurrentVersion\Run "Camera Assistant Software".

  If it still does not work, then get an ASP to fix it.

• Cannot use the webcam in hp Omni200 all in one PC

  I have hp omni200 5320il PC AiO... but am unable to use the webcam... Do I have to install drivers?

  Sarbjas1726,

  I want to access the BIOS and check to see if you can reset it.

  1. turn off the computer

  2. as soon as you turn on the computer repeatedly press the F10 key

  3. If you should drive in the BIOS configuration screen

  4. once he look down, lower-right, angle and you will see a guide that will show you what each key

  5. If you see the keys F5 or F9 to load default press the corresponding key

  6. then agree to the prompt that is displayed

  7. Press F10 to save and exit

  If you are able to do so, test to our webcam once return you to the main screen.

  Please answer as soon as possible.

  Thank you

• A satellite - cannot use the webcam - in use by another program?

  Sometimes a reboot works but not very often.

  The camera assistance software says "in use by another program.
  How can I find the other program so I can stop it?
  I already rebooted the software nothing works.

  Reg

  Hello

  The webcam software load automatically at the beginning of the windows to start the procedure. The program mentioned is perhaps the assistant webcam software.
  You can disable this automatic startup in msconfig.
  Type in RUN-> msconfig, go to the Startup tab and disable the webcam software.
  This prevents the start software.

  On the other hand, it could be another tool like Skype, MSN messenger or similar

• Cannot use the webcam on my Satellite A300

  Hello

  I installed Windows 7 Home premium in my laptop (windows Vista there) and since I can't use my webcam.

  It does not appear in Device Manager and I have install and uninstall the drivers of many times but whenever I see the message that says that the camera is either disconnected or destroyed and restart the computer or the camera.

  Is there a way to fix this?
  Thanks in advance...

  My laptop is Satellite A300-20W with PSAGCE-09N00DGE model number and the serial number 29353297Q

  I have the Satellite A300 too with two hard drives inside. Second I ve installed Win7 32 bit and the webcam works perfectly so I m just really wondering what the problem may be.

  You are 100% sure that the webcam works properly with the original Vista recovery image?

• When you use the webcam with some Web sites, PC off

  I installed a video for jwin JC-800 on webcam on my windows xp pc. I used the disc of the included software to install drivers, etc... When using the sites web cirtain to activate the camera, such as windows live instant messaging, it stops the pc.

  The cam is also up when trying to use the "audio and video Setup" prompt Windows live instant messaging to adjust the parameters of the cam for a display of web cam or video call, although sometimes it will start and run ok on messengr - as no adjustmentsare have made to the settings of the camera video or audio. On other websites, during the implementation for video chat, the pc stops when "enable audio" is selected. Also, when turn on the cam directly from the desktop icon and try to configure the space required for video captures the pc shuts off or the programwill camera become UN-responcive and jam. I tried programs assistant camera, device and windows as well as the control panel and help centers copatability, but don't know enough to mess with the configuration of services/programs/settings on the pc to fix the problem

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Cannot use the output VGA on my Satellite A100

  I have laptop Satellite A100 and when I use the my monitor VGA output announcement there is NO signal. I checked my monitor and it does not work.

  This that I would like to know because there is no my VGA output signal does that also mean that the * S-video * will not not a signal?

  I do not have a S-Video > VGA adapter as far trying to save the cost of buying one if it doesn't...

  I don't really know what you're doing wrong?
  Is your laptop connected with VGA cable or an adapter on your laptop VGA port?

  When the monitor is connected please use FN + F5 key combination to switch between an LCD display and connected monitor.
  It work?

• Cannot use the scanner with Lion

  Hi, I just upgraded to Lion, then in v2.1 the All in one C7280 driver using the menu of updated apple softawe.

  The printer works fine but when I swtich to the scanner, it returns the following message:

  HP Scan cannot be opened because of a problem.

  Check with the developer to make sure that HP Scan works with this version of Mac OS X. You may need to reinstall the application. Don't forget to install the updates that are available for the application and Mac OS X.

  I could try to reinstall the driver but I do not know where apparently no longer in the software update list.

  Thank you for your help

  Stone

  Hi Pierre,.

  The HP Scan is not compatible with Lion, currently the scan software is provided by Apple Software Update and will allow you to scan by using the dialog box Print & scan (located under system preferences), Capture of Image or Preview (both located under Applications)

  Please specify if you can scan using these applications.

• Cannot use the Upce with Centos64 comments or template customization

  Hello

  I'm trying to deploy a new Centos 6.X 64 comments using a technique of customization. I built the reference VM with a single ext3 partition and the swap partition. I installed the version of VM Tools that is listed as current. When I try to use the specification of customization, I prepared the selection is grayed out with the message:

  "The personalization of the guest operating system"centos64guest"is not supported in this configuration. Customers Microsoft Vista and Linux with a logical volume Manager are only for the recent host ESX and VMware Tools versions support"

  I am running:

  vCenter 5.0 build 913577

  ESXi 5.0 build 914586

  The customer does not use an LVM. Here is the output of "-l parted."

  Model: Virtual disk in VMware (scsi)
  Disk/dev/sda: 107 GB
  (Logical or physical) sector size: 512 512 b/b
  Partition table: msdos

  Number start end size Type file system flags
  1049kB 1 GB 101 101 GB ext3 primary bunch
  2 GB 101 107 GB 6443 MB linux-swap (v1) primary

  I review the comments of Linux requirements and have not been able to find out what I'm doing wrong here. Can someone tell me please in the right direction?

  Only the operating systems listed in this guide are officially supported for customizing the vCenter guest operating system:

  http://PartnerWeb.VMware.com/programs/guestOS/guest-OS-customization-matrix.PDF

  Unfortunately, CentOS is not among them and vCenter will refuse to apply the customization of virtual machines that are configured for CentOS. However, you can easily get around this by setting the configuration option of the machine virtual guest to the corresponding version of RHEL operating system. This should cause problems for normal operations of VM, but you can replace it on CentOS after customization if you want to be sure.

  LVM or normal partition scheme should without importance for the success of the customization process itself.

• Cannot use the mouse with the laptop wireless

  I just bought a laptop. I bought a wireless mouse, but I don't know why it won't let me use it.

  Hello

  1. What is the brand and model of the mouse?

  2. What is the brand and model of the computer?

  3. what operating system you have installed in the computer?

  I suggest you follow the steps described in the methods to solve the problem with the wireless mouse:

  Note: the instructions are applicable to Windows Vista and 7.

  Method 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  Bluetooth devices. Bluetooth devices, the steps may be a bit more detail, and you will need to follow the steps listed in the documentation provided with the device. For additional help with Bluetooth devices, see Add a Bluetooth device to your compatible computer deviceand Add a Bluetooth device or other wireless or network device: frequently asked questions.

  Please post back with the result.

• cannot use the webcam or play dvd Windows Inspiron ONE 2320 8.1

  Hello.

  When I open My Webcam Central on my Inspiron One 2320, I get a nice message on the right hand bottom corner 'not supported Webcam. Hmmmmm. When I try to play a DVD, no luck.

  I use Windows 8.1

  I went into the Manager.Under Imaging device, there is no sign of a driver for the webcam.

  In the section DVD, States of CD-ROM/DVD-ROM HL - DT ST DVDRWBDCT40 N does not properly. When I right click to update him pilot-still no worky.

  Thank you for your help!

  Nora

  The webcam is already installed. Central webcam is software and is also already installed. Look at the illustrations in the Quick Start Guide in the list of books below and see that the camera is located on the bezel at the top of the screen has a cover and light. Remove the cover to see if that helps. If you're still having problems, go to this site to help support more-

  www.Dell.com/.../manuals

• Cannot use the eraser with envelope envelope text in cs4

  I tried to create a text comes to be creative period. I've done the envelope text wrap because I wanted to clear some place add different colors. Only the gum allows me to erase any part of the text. I was looking to separate the text, but I can't seem to do. Does anyone can tell what can I do to be able to use the eraser on the text of the envelope.

  Thank you

  It's the same thing.

• Gray display using the S-video out on Satellite A200-24 b

  Hello everyone

  I have Toshiba Satellite A200-24 b, equipped with S-video port.
  When I connect to my TV to always display in grayscale mode (no colors)
  I tried to use other cables and other TV, but always with the same problem.

  the cable I used is the S-video to video (A V).

  someone has an idea for this problem?

  Thank you

  Hello

  There are different reasons why you get only a black and white picture on the TV.

  I had the same problem because I used an s-video-to-SCART cable and the pin assignment didn't match with the assignment of the TV port pins.
  But the same cable worked in another TV.

  Another reason could be the bad PAL/NTSC setting.
  Please check this!