Cannot write to the folder C:\WINDOWS during repair or even Recovery Console

Similar Questions

• Applications cannot write to the users directory

  Applications have lost administrative privileges. They were OK but now windows live mail cannot create a message, acrobat cannot create temporary files and quark is not yet open. All the same problem, cannot write to the folder "users". When I turn off UAC, all right. I don't want to disable it permanently. I want to diagnose the problem and difficulty so I can restore UAC

  This smells like a folder authorization number. I would check the permissions for the temp and the WLM, using Windows Explorer folder. Here's how you can find their names:

  For the Temp folder:

  1. click on the globe to start, and then type the three letters cmd in the search box and press ENTER.

  2. Enter the following command and press ENTER:
  Set temp
  For the WLM folder:
  1. open WLM
  2. click on Tools / Options / Advanced / Maintenance / Shop folder
  Windows updates or AVG updates are extremely likely to be behind this problem, if this is because you would have heard about it a long time ago. I suspect that malware error or a user.

• message cannot write to the file destination 1016

  I try to export photos to a memory card and I get a message "cannot write to the file destination 1016. I was able to export several photos, then I could not export more. Help

  In general, memory cards are in FAT format that hold a number very limited file to the root - the safe way to put photos on a memory card is select them in Photos and export to a folder on the desktop and then use the finder to drag this file to Gendarmerie, unlocked memory card

  LN

• Setup cannot write to the destination file

  I try to install software on Windows 7 that has always worked well in XP and earlier versions of Windows.  When I run the Setup on Windows 7 routine, I get:

  Setup cannot write to the destination file "C:\Program Files\Pandawave\WorldCal.exe"

  Can someone tell me how to deal with this?  It seems to be a security problem, but I have no idea what to do about it.

  Thank you

  Dan Schwartz, Tallahassee, Florida

  It is a restriction of the UAC (User Account Control). Right click on the shortcut of installation, and then click "Run as Administrator" line to work around.

• What happens if I delete the folder C:\Windows\SoftwareDistribution?

  Hey if long story short, I wanted to switch to the window 10 but now I don't have and I get this widow to come it's almost time for my upgrade, even if I deleted the application of windows 10 get and all the installation of my computer files. If I open windows update he says also your upgrade is ready and the point is that I can not new updates for my computer because of her wanting my upgrade. So, I was told I should try deleting the folder C:\Windows\SoftwareDistribution and that should fix the problem but I don't know what all will happen if I do. Delete the folder C:\Windows\SoftwareDistribution resolve my problem and allows me to install some other updates? What happens with my current update settings and other things? Something will happen to the updates already on my computer?

  If you want to disable the upgrade of Windows 10-

  http://blog.ultimateoutsider.com/2015/08/using-GWX-stopper-to-permanently-remove.html

  This has been used by me on 4 computers that were not ready to upgrade to Windows 10 at this stage.

• RW-00000: cannot write in the following directory. Please check the permissions. Failed to create the context to the/tmp file

  Hi, I'm under RapidWiz 12.2.0.50 to make a R12.2 installation on a platform for x 86-64 Oracle Linux 7.1.

  I get the error message

  RW-00000: cannot write in the following directory. Please check the permissions. Failed to create the context to /tmp/11061511/lab3_DEMO1_db.xml file

  However I've looked at what my directory/tmp is completely open (wise authorization), as well as the subdirectory 11061511 under

  lab3-nms: / > ls - al

  drwxrwxrwx. 14 root root 4096 Nov 6 15:22 tmp

  lab3-nms: / tmp > ls - al

  Total 16

  drwxrwxrwx. 14 root root 4096 Nov 6 15:22.

  drwxrwxrwx. 19 root root 4096 Nov 6 14:19...

  drwxrwxrwx 2 root root 25 Nov 15:11 6 11061511

  drwxrwxrwx. 2 root root 19 6 Nov 14:18 .esd-0

  drwxrwxrwx. 2 root root 6-9 Oct 23:16 current unix

  drwxrwxrwx. 2 root root 17 6 Nov 15:11 hsperfdata_root

  drwxrwxrwx. 2 root root 14:18 Nov 94 6. ICE-unix

  drwxrwxrwx 2 root root 23 6 Nov 14:18 ssh-KQeDztQLkQHj

  drwxrwxrwx 3 root root 16 6 Nov 14:18 systemd-private-OgJMdJ

  drwxrwxrwx 3 root root 16 6 Nov 14:18 systemd-private-S5pkDq

  drwxrwxrwx 3 root root 16 6 Nov 14:18 systemd-private-x5Iry2

  drwxrwxrwx. 2 root root 6-9 Oct 23:16. Test-unix

  -rwxrwxrwx 1 root root 11 6 Nov 14:18. X 0-lock

  drwxrwxrwx. 2 root root 24 6 Nov 14:18. X 11-unix

  -rwxrwxrwx 1 root root 11 6 Nov 14:18. X 1-lock

  drwxrwxrwx. 2 root root 6-9 Oct 23:16. XIM-unix

  lab3-nms: / tmp/11061511 > ls - al

  Total 16

  drwxrwxrwx 2 root root 25 Nov 15:11 6.

  drwxrwxrwx. 14 root root 4096 Nov 6 15:22...

  -rwxrwxrwx 1 root root 8529 6 Nov 15:22 11061511.log

  any ideas what the permission problem?

  Thank you

  Jim

  Found the problem and it's nothing to do with users, groups, and permissions of files (tmp or anything else besides!)

  The problem was that I had not put the sysconfig according the upgrade installation Notes & R12.2 for Linux x 86-64 ( note 1330701.1 )

  I guess the bum steer, which gives install them quick - is indicating that the question is a problem of permission of the files in / tmp, when it is not really!

  The only thing I can think is that it uses sysconfig content to add the name of host or domain, the file name, he tries to put in / tmp.

  hope this helps

  Jim

• Hello. Cannot write to the bracket. Give the address of the caliper.

  Hello. Cannot write to the bracket. Give the address of the caliper. There is no synchronization.

  Are you able to connect to your Fotolia account with the exact references you are trying to sync with? Please check. If you can not, you may need to reset your password. If your Fotolia password is older, you may have to spend even if it does not work. To be acceptable on the Adobe Stock contributor Portal password must be a minimum of 8 characters. It must have at least a capitol letter, a lowercase letter, a number and a special character.

  I hope this helps.

  -Mat Hayward

• Application object library cannot write to the temporary directory.

  Hi all

  Competitor request ended with error. Here is the error in the log file:

  Application object library cannot write to the temporary directory.

  Cause: The temporary directory specified by the user is not a valid directory for creating temporary files.

  Action: Choose a different temporary directory.  This is usually specific
  Competitor Manager encountered an error when executing Oracle * report for your concurrent request 58591800.

  Review your output request file competitor newspaper and/or report for more information.

  Need quick help on this.

  This problem is corrected. It was the $APPLTMP directory does not exist.

• After the installation of Windows 7 repair I 219 updates. Best way to install? Small batches... oldest first? Others?

  After the installation of Windows 7 repair I 219 updates. Best way to install? Small batches... oldest first? Others?

  In the previous 18 months there have been many updates toxic that caused problems... these fixes are well eliminated or fixed retroactively or this process will be as walk minefield?

  I currently intend to install some office and .net updates separately and to wait on the optional updates updates security priority are installed.

  Thanks for any idea.

  Properly installed all updates of security except IE11 upgrade [has a full update of IE8 that should cover most security problems... [Since I use Firefox... or whatever it is, but it is to say... no biggie].

  I installed the updates [ie8, etc] 1 security and updates in batches of 20-30 for most recent first then older then. Then I installed the office updates and then a point net 3.51.research showed several versions of dot net needed.

  After each batch, I did a restore pt.

  Note: this repair facility corrected a connection problem that prevented programs and 32-bit browsers... including malwarebytes to connect to the net. I had followed the many expert suggestions to fix this problem without success before the repair facility.

• Cannot delete the folder in Windows 8

  When I try to delete a folder on my desktop it does not work. This is because it is read-only. I have all the permissions on the folder and try to change read-only. When I try to delete it then it becomes read only once I have look at the properties.

  Hi Jack,

  Let us work together to solve this problem.

  Please refer to the instructions in the following link:

  "Access denied" or other errors in the access to or work with files and folders in Windows
  http://support.Microsoft.com/kb/2623670?WA=wsignin1.0

  Important: You must be logged on as administrator to change permissions of files and folders:

  Please get back to us with the results.

  If you have questions about Windows operating systems, help us on this forum. We are happy to help you.

• Cannot write to the temporary directory

  Cannot write to directorywindows temporary \temp\24409 error 3-windows vista online

  Hello, PradeliaBlender,

  You try to install an application?  Make sure you have write access to this directory.

  Empty Temp folder and try again

  Start > Accessories > system tools > disk cleanup > TICK 'TEMPORARY FILES' > click OK

  Try the steps listed here:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/unable-to-write-to-the-Temp-directory/1c386624-9FA1-4cb2-87BE-a42a3cc90b4b

• SQL Lite: Cannot write into the error of database readonly on release on appworld sandbox

  Hello

  everything was workin find in development mode, but when I downloaded and run my app from appworld sandbox I get the following error:

  SQLLite:

  "Cannot write to readonly database error"

  Thanks in advance...

  It is a database in your application / folder (i.e. comes your file .bar automatically during the installation)?

  You should not write in the app / folder in your application. This can be done in development mode, but it is intended only as a convenience for certain types of deployment of debugging (if you do not have to copy all the files on each time you make a change).

  If you have data in your application, what needs to be changed after the installation, it must be copied into the app. / data folder when the application first runs (or, at least, when it must first change).

  Information here: https://developer.blackberry.com/native/documentation/bb10/com.qnx.doc.native_sdk.devguide/com.qnx.d...

• Setup removes the junction point NTFS redirect the folder system "\Windows\Installer" on another disk.

  On a computer running Windows XP Professional SP3, I redirected the "\Windows\Installer" system folder, with a junction to a record point in a tree of directories to a different drive.  The operation was conducted and verified using "junction v1.06 - creator of junction point analysis viewer and Windows' published in 2010 by Mark Russinovich. I moved all the files and subdirectories contained in the original "\Windows\Installer' in the target directory (the these files had been previously copied to a temporary directory and after the move, I checked that they were visible in the folder '\Windows\Installer' open the symbolic link with the Explorer).
  Then I launched a system patch, and I discovered that the installation of the update of the software deleted program point junction that I created, deleted all the cache contained in the directory with the name of substitute target different files and recreated the "\Windows\Installer" folder in the original disc.
  I tested this behaviour a couple of times, installing various software and updates, so I assume that it does not depend on the software that is installed but the installation program itself, which cannot handle a point of junction of the folder "install".
  No warning is given before deleting the junction point and all of its contents.  With a similar procedure, I made two points of junction for '\Windows\Downloaded facilities' and '\Windows\Microsoft.NET' and they have exploited properly.
  Out of understanding points do not work on startup, so it is impossible to redirect for example. :

  • \Windows
  • \Windows\System32
  • \Windows\Config

  "\Windows\Installer" isn't one of those cases, and it is not used at startup.

  Is it possible to use a junction point to redirect the \Windows\Installer on another disk/partition folder, or Setup will always delete all the files that have been targeted in the naming of replacement?

  Hello

  Your question would be better suited for the TechNet forums.

  I suggest you to ask your question to the TechNet forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Setup cannot continue because the version of Windows on your computer is newer than the version on the CD.

  I'm doing a clean install of windows xp C:\i386 professional.  I can't work around the error above.

  Assuming that the file is good:

  1. Mount the drive in another computer Windows XP.
  2. Move the folder i386 on the disk.
  3. Format the drive FAT32
  4. Bring the i386 on the disk file.
  5. Start the computer with a Windows 98 boot CD
  6. Run \i386\Winnt.exe
  7. Once Windows is installed, you can convert the FAT32 to NTFS drive.

  Windows XP not reformatted partitions greater than 32 GB in FAT32, you can keep the score at this size or less. If you want a partition larger than 32 GB, you can use the Windows 98 boot cd to prepare the drive and format it FAT32.

  Fdisk can choke on the logical drives NTFS tools as Delpart.exe can cope with this, or you can use the Windows XP disk management tool to remove the partitions on the drive before using the Fdisk and W98 startup disk.

  To start the disk management tool type diskmgmt.msc in the box run from the start menu.  Windows XP cannot format disks over 32 GB FAT32, but it can ride greater than 32 GB FAT32 drives which have been prepared by other operating systems.

  These will be useful:
  http://support.Microsoft.com/kb/315349
  http://support.Microsoft.com/kb/307848/en-us

  You can get a CD to start Windows 98 .iso image here: http://www.allbootdisks.com/download/iso.html

  Download the Windows 98SE you without a RAMDrive (Win98SEnoram_bootdisk.iso) it has no Smartdrv and without it, it will take Winnt forever to copy files.

  Make sure that you have the Windows XP product key before do you all this!  Without the key, you will not be able to install Windows.  The key can be extracted from the registry if necessary.

  John

• Cannot create a new folder in windows 7 Professional 64-bit

  I can't create a new folder in Windows 7 Professional 64 bit.  Cannot create SkyDrive Explorer, or the desktop.  It is not an option when right clicking on, even if the new compressed folder is an option.  Thank you.

  See if the message marked as the answer in this thread helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/unable-to-create-a-new-folder-in-Windows-7/3c5951c8-e3b0-4E5B-99A5-744f842fe558