Cannt get ip dhcp from a trunk port

Similar Questions

• Store data from the Serial Port in the buffer and then take action?

  Hello! Everyone,

  I'm new to LabVIEW and I take assistance from various videos and stuffs available online to get started with LabVIEW.

  But I have a duty, therefore needing help.

  initially I see some of the tutorial videos and learned about the LabVIEW interface, and does a little project to communicate with the Port series (receiving and sending data).

  Happens to my task.

  My LabVIEW application will send a few State request packets on my device or control and based on the response packet that I have to display values.

  The Structure of package is as

  Header, length, Op_Code, data Checksum

  There is no terminator as newline or carriage return or anything else.

  In C language, I read the data from the Serial Port, and based on the length, I conclude that I got the full package or not, and then by recalculating the checksum value, the integrity of the package is verified and then based on that Op-Code has been sent will be decided.

  (I'm dealing with hexadecimal data)

  But how can I do this in LabVIEW.
  A tutorial or any referece will be useful for me.

  1. I suggest that you learn to use Shift Registers instead of local and global variables.  They are much more efficient (memory and execution speed) and make it much easier to read the schema.

  2. you don't need this inside the loop property node.  Is there a way to configure a Serial Port to turn off the stop character.

  3. you don't need to wait for playback VISA will limit the rate of loop if no data is coming.

  4. Once you have the length, you simply read the rest of the entire message and process it at a time.  This will make things a LOT faster.

  5. you should really do this enum a def type so that you can ensure that all your enum constants have the same values.  If you need to add a State later, simply update your enum in the same place then.

  

• After having my system repaired, I can't have my mobile data card (wireless broadband modem) to operate. I can't get any service from the server.

  TBS wide BAND WIRELESS MODEM data

  I had to have my computer repaired, now I can't get my mobile card data (wireless broadband modem) to operate. I can't get any service from the server. I called them and they said that when the laptop has been repaired. The Ports were not tied and cannot open anything. All other elements of work of these ports (wirelsee mouse/printer and I explained this to the technician, it is only thought was to call in a repair service.) I think their answer is like the auto machnic said to go and change the air in your tires. Can you give me any advice?

  Hello

  I suggest you to stay in touch with your Internet service provider.

• Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.

  WndOws XP install problems with Lexmark X 2480 printer no cd

  Can't seem to get the printer to the appropriate port to communicate with the printer Lexmark 2480.  Downloaded, but prints blank pages.

  Hello, ColoChick,

  Your question must be posted in the hardware and drivers Forum.  Note the drop-down menus...

  http://answers.Microsoft.com/en-us/Windows/Forum/performance

  Search for drivers for your Lexmark printer.  The complete set is recommended for a full installation.

  http://support.Lexmark.com/index?http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en_US&ProductCode=LEXMARK_X2480&focusedTab=downloads#2

  You can also try the universal print driver

  http://www1.Lexmark.com/en_US/software/UPD/index.shtml

  If possible, contact Lexmark for the installer of physical media (CD)

  Q: How can I contact the Lexmark parts?

  R: customer support is available Monday - Friday from 09:00 - 18:30 AND

  E-mail: * address email is removed from the privacy *
  Phone: 1-877-577-2787
  Fax: 1-800-258-4880

• The trunk port vs access port speed

  I'm going to put in place a 4900M for a temporary training class, for 1 GB PC connected client.  I used an interface of 10 GB with a X 2-10 G - SR which will connect via fiber 62.5 microns, to a 10 GB interface 4948 with an SFP-10 GB - SR.  With respect to the config, I have the installer of the te1/1 4900 M as a port of access to the 4948.  Connectivity is fine, as well as the routing.  But when we use the client connectivity of the PC (connection to 10 GB of storage) drive, we get speeds of great reading but when he tries to write, it slows down and ends in error.

  Question 1: Would it make a difference if the 4900M was connected via a trunk port to the 4948?

  I think the problem is the maximum length and the length of the fibre 62.5 transmit\receive transceivers, but I want to dismiss the switchport configuration.

  I doubt very much if a trunk port change would make a difference.

  Certainly not something I've ever met.

  Jon

• Use of the Trunk Ports (Cisco) on the management interface

  Hi all

  Background:

  We are in the process of consolidation of 2 farms of esx servers and will end up with 10 guests in a single cluster. Guests come from 2 VLAN separate (say 10 of VLANs and vlan 20). A test I took one of the hosts of HA/DRS and tests with it. For HA and DRS to work efficiently and properly in common all resources, we all want vm to leave both VLAN access to move to any host in the cluster.

  The test:

  My single host mentioned above, I created 2 groups of ports on a vswitch, vlan10 tag and with vlan20, I deployed a VM and tried on the two IP address ranges. It worked (with the correct settings of defined IP by VLAN) but as soon as we resources shared the port used by the management of network vmkernel port we lost the connection to the HOST from a management perspective. What the question is that it is possible to connect the management network a trunk port? We have 2 network interfaces connected to the vSwitch and both used for the VM traffic as well as management traffic. That's how they are currently implemented except that the switch port is on a VLAN-specific rather than shared resources.

  Thank you very much

  Chris

  Hi Chris

  Yes, the network management also accepts the vlan tagging/trunking.

  Just add the number VLAN on the Portgroup.

  Maybe you can do a printscreen with the current configuration?

• Trunking ports (aggregation of links) does not

  Hello

  I have a single server ESX 4 (hp dl380g5), with 2 natachasery connected to a switch hp 2510 - 48g GB. I created a trunk on the switch ports 1 and 2 and they hooked up to two natachasery ESX.

  I have only 1 vSwitch in ESX and storage space (no VMkernel) that has the Service Console and the network of the VM. I activated this vSwitch (vSwitch0) on IP Hash load balancing to create a theoretical trunk on my 2 GB cards. The two NICA belong to vSwitch0

  When I read/write data to the virtual machine only on trunk ports now seems to manage the data and not both at the same time and with the same flow of data or usage that I expect.

  Is this expected behavior? I have something wrong or bad understand something here?

  Thank you

  Pascale

  I guess you are aware that the mechanism of hash IP packets with an IP - X to another IP - there are always transmitted only a single port physical thorugh, but never through multiple ports at the same time? Therefore, you will never get an increase in throughput for a single "conversation" between IP - X and IP - Y, no matter how much rising physical your chest has. This is due to potential for learning MAC layer 2 and other issues.

  Have you tested with a number of different source/destination IPs connections?

  If you have tested only a small number of connections, you could be 'unlucky' that the hash produced the same uplink of Teddy for all connections.

  Alternatively, you can view the network esxtop notice to see what Teddy what kind/loads of traffic.

• Huawei P9 - I have many issues with getting my pictures from the phone to my Imac

  Huawei P9 - I have many issues with getting my pictures from the phone to iphoto on my Mac.

  Before the summer I bought a Huawei P9 phone, I can easily see the photos on the phone - I can't just them on my mac.  When I connect via a USB cable, it refuses my permissions.

  I try to use my Google account to view on the Mac and move the iPhoto - I can't work either! I can see them, I can't move them!

  I'm pulling my hair out and I have enough to do with! Help, please...

  Jim Hosking

  You need the phone provider support - there is a problem with the way their phone works and how to use it and has nothing to do with the Photos or iPhoto - if pictures is consistent with standards of good Photos and iPhoto won't work with it

  You may need special third party software for your phone load in Photos or iPhoto

  LN

• possible to get the mails from the server?

  Hello.
  One of my computers is down, I can't activate it now. I had all my correspondence of work on this (used Thunderbird, I don't remember exactly, but I'm afraid, I put the POP account here).
  So I used my other computer, installed Thunderbird here and set the same account, but this time as IMAP.
  The thing is that only later June 29 emails have been downloaded on the computer, and I really need to see some 'old' mails (not very, but at least 3-4 months). My broken computer is placed at the service only in August, and again, I'm not sure I can read my email that.
  Is there a way to recover old emails on the server?

  Thank you.

  You say "this time as IMAP" and you previously used POP. It is possible that the messages are still on the server (this is not a default configuration), but I think you would have seen them if they were there through your IMAP system connected to the network. Have you visited the server through its Web site to check?

  Unfortunately, with the POP Protocol, messages are not likely to be on the server and you really need this broken computer to be ironed out. Make sure your technicians know that they must not remove or replace its data files!

  Glib this type of query response is well, 'just get it back from your backup. Easily, said after the fact, but this experience can be a good point to consider if and how you could back up your data regularly to protect against similar problems in the future.

• How can I get the message from thunderbird to stop coming when I opened my email?

  How can I get the message from thunderbird to stop coming when I opened my email?

  Press the alt key to make the call of menu bar
  Select Tools-Options-general
  Disabled the Start Page

• In do not distrub, I allow checked calls from all contacts, but I always get unwanted calls from contacts not

  In do not distrub, I allow checked calls from all contacts, but I always get unwanted calls from contacts not

  If it's one or two unwanted callers - you can block by using the list of recent - i - block this caller

• My iPhone password 5 had been blocked. Can I get immediate assistance from Apple Support?

  I use the iPhone 5 for sometimes and still getting used to it. My iPhone 5 is now locked password. I couldn't find a way to unlock the password, reset the phone and install the updates of the application. All support them? Can I get immediate assistance from Apple Support instead of trying to get the queries and responses via blog sites?

  Connect iPhone in recovery and restore via iTunes Mode

• I lost my cd of Microsoft, but I have coverage which is the product number how to get the software from apple

  I lost my CD of Microsoft office, but I cover that has the product key and the proof of license do I get Apple online? can someone help me please. Thank you

  You get software Microsoft from Microsoft, not Apple, it is available for download.

• I uninstalled Adobe Flash and then tried to download. I get a message from Adobe saying 'Failed to initialize' is there a setting on Mozilla, I need to change to allow the plug in?

  I uninstalled Adobe Flash and then tried to download. I get a message from Adobe saying 'Failed to initialize' is there a setting on Mozilla, I need to change to allow the plug in?

  Why don't you use Firefox 7?

  • getfirefox.com

• How to quickly get 100 + photos from iPhone in pictures on iMac with the download speed very low broadband?

  Hi all

  I have an iPhone 6 Plus running iOS 9.3.1 and a retina iMac running OSX El Capitan 10.1.4.  I use iCloud photo library and I like the idea of having all the pictures synced across all devices.  This works well for one or two odd photos I take here and there.

  I have just been on vacation and taken 100 + photos with my iPhone and want to create an album of photo printed on my iMac, but the problem I am facing is that it takes so long to get the pictures on pictures on my iMac.

  My download speed high speed is very low - on 0.3Mbit / s, so the photos are always download to iCloud from my iPhone now, and I guess it will be another day or two to complete.

  Is it possible to get the photos from my iPhone to the iMac more quickly without creating duplicates or spoil my library?

  It's so frustrating to have to wait 5 days after her return from vacation before you can start making a photo album.

  Thanks for any help,

  Kind regards

  Ben

  You can connect the phone with USB and import or use iTunes sync or Capture of Image - this can cause a problem with duplicates

  And of course, you can stop by a store StarBucks, Apple (or other WiFi hotspot with good service) and complete quickly

  LN