Canon Faxphone L75 pilot

Similar Questions

• He had to solve a premature engine Install-Shield error during the installation of a Canon FaxPhone L80

  The computer is badge Office that normally come with Window XP.  The computer is now upgraded to Windows Vista.   Need to solve a 'Install-Shield' premature engine error when installing a Canon FaxPhone L80

  Hi HANANE AJAYI,.

  1. Did you the latest changes on the computer?
  2. What is the exact error message that you receive when installing the device?

  I suggest that you uninstall any previous version of the Canon FaxPhone L80 software available on the computer and then reinstall the latest version of the software and check if it helps.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

   

  Software driver for FAXPHONE L80

  FAXPHONE L80

• Driver instilation Canon Faxphone L80: 'cannot run the installation program on the operating system you are using. Run the installation on a taking operating system support this'.

  I have / am using Windows Vista Home Premium Service Pack 2 on an HP Pavilion dv7 Notebook PC 64-bit operating system.  What do I need to install correctly this driver for my Canon Faxphone L80 multifunction copier/printer/fax?  HP doesn't have an answer.  Canon doesn't have an answer.  Is Microsoft a response to my delima?  Thank you, Mark.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  See you soon. Mick Murphy - Microsoft partner

• Canon Faxphone L80

  I downloaded the windows 7 (32 bit) and try to run the install exe. Finally, the process said that it cannot find the L80 suggest unplu and reconnect it. When I do that here you can connect ring and disnconnect of USB, but it still can't find the printer. Check in devices and printers, an icon and the name of L80 is listed "unspecified".
  Please let me know if you have a solution to this problem
  Ervin

  Hello

  Perform the steps mentioned below and see if it helps.

  a: Click Start.

  b: In the search box of start type regedit and press to enter.

  c: Navigate to the following registry location:
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print \Environments\Windows NT x86\Print Processors\

  d: Click to select the print processors key.

  e: On the Edit menu, click New and click on the key and type "winprint" (without the quotation marks) in the dialog box add a key key name field (leave the field blank to class).

  f: Click to select the winprint key. On the Edit menu, click on the value chain.

  g: Type the following values in the add value dialog box, and then click OK:

  Value name:pilot
  Data type: REG_SZ

  h: For the string value, type ""winprint.dll " (without the quotation marks), and then click OK."

  i: Restart the computer. Once the computer restarts, verify if you are able to add printers.

  Registry warning:

  However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, proceed as in the KB Article:

  http://support.Microsoft.com/kb/322756/

  Hope this information helps.

• CanoScan D1250U2F: need driver to connect to the HP Windows 7 computer

  I have a HP with Windows 7 computer.  Cannot get my CanoScan D1250U2F scanner on computer because there is no driver.  How can I get the driver?

  If Canon does not pilot windows 7 there is none.

  If you have win7 Pro or Ultimate there is workaround

  http://www.Microsoft.com/Windows/Virtual-PC/

• I have windows 98.canon printer i860, need to pilot/prog to drive the printer? __

  I have dell pentium 4 (series no dh21f11) for Windows xp, works with windows 98,

  want to drive canon i860 printer,

  28/05/2010 18:45, bannock wrote:
  > I have dell pentium 4 (series no dh21f11) for Windows xp, work
  > with windows 98.
  >
  > want to drive canon i860 printer.
  >
  See the Canon site.
  http://www.USA.Canon.com/consumer/controller?Act=ModelInfoAct&tabact=SupportDetailTabAct&fcategoryid=232&ModelId=9387#DownloadDetailAct
   

  pen34us

• Canon i-sensys mf 3220 pilots 86 bit windows 8 download

  Where can I download the drivers for

  Canon i-sensys mf 3220 drivers 64-bit windows 8 download

  Thanksx

  Hello

  Welcome to the Microsoft community!

  From your problem description, I understand that you're looking for 64-bit drivers for your Canon i-sensys mf 3220.

  You can download the updated drivers windows 8 from the following link:

  http://www.Canon-Europe.com/support/Consumer_Products/products/Fax__Multifunctionals/laser/LaserBase_MF_series/i-SENSYS_MF3220.aspx?type=download&page=1

  NOTE: From the link above, you can also download the Firmware updates, user guides.

  Also check out this link:

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Canon lide 25 scanner will not work after that download pilot just says that there is no application registered for this event

  I'm on windows 7

  did not get any software with driver scanner just downloaded.

  I'm on windows 7

  did not get any software with driver scanner just downloaded.

  Go to this web page:
  CanoScan LiDE25

  Select Windows 7 from the menu drop down.

  Download and install the driver TWAIN and the CanoScan Toolbox.  In that order.  Reboot if asked or at least restart after the installation of the two.

  Try again.

• Canon iR C2880i

  I ve just upgraded to OS X El Capitan, 10.11.5 version and I'm making the printer, iR C2880i, work with the system again.

  I tried to connect via the USB port (preferred) and ethernet, neither works.

  I deleted the printer and also cancelled pilot and try to reinstall but it doesn´t work.

  Canon specify on their homepage (to http://www.canon-europe.com/support/products/imagerunner/irc3580-i.aspx?type=dri & language = EN & os=OS%20X%2010.11%20(El...) they have at least 8 pilots (including 3 fax drivers) but none of the work of printer drivers. They also specify the compatibility with OS X 10.11 but not 10.11.5.

  Please any suggestions?

  Thank you in advance.

  Michael

  compatibility with 10.11 should include 10.11.1 - 10.11.5

  However, please start with this document

  https://support.Apple.com/en-us/HT203343

  and USB is preferable for a number of reasons, if it is available.

  in case you can not solve it you may wish to consider this and proceed as see fit you

  http://GIMP-print.sourceforge.NET

• Canon printer does not connect via the IPP Protocol

  I work in a company that sells printers offices/schools/etc. Yesterday, we received a call from a customer indicating that the Copier, we sold them connected not to a new computer they bought.

  I went to the site and noticed that the computers in question were all purchased during 3 months and all loaded with Mac OS X El Capitan. Most was registered on 10.11.3, and some 10.11.2 and 10.11.1. All computers work turned Yosemite.

  We receive a message somewhere in the sense of "Communication error. This printer may not be able to [print], you want to save it anyway? »

  It was a cannon imageRUNNER Advanced C5235. The client declares that if he saved the printer, it would not be able to print, but would still see jams paper, messages and other statutes of the computer printer toner. After attempting to remove and reinstall the printer using the most recent driver available on the Canon Website, we received the same error, the customer received. We escalated it to Canon support, who asked us to choose LPD instead of the PPI for the Protocol, allowing the printer to you connect and start printing on all devices running El Capitan.

  After further research, to my knowledge, the ISB is more recent and has more features that the LPD, although I couldn't find much on it so I was uncertain about the origins of these two protocols, except that they were introduced in the 1990s. I know it's kind of vague, but is better/more recent than PPI LPD? If so, great. Otherwise, is there a way to solve this problem and get computers that run El Capitan to connect correctly using IPP?

  The problem here is that the driver Canon UFR2 or PS that was used on the Mac to print in ADVANCE of Canon C52xx does not support PPI. This is why you must use an alternative Protocol.

  Note that it is possible to print to the C5255 using the PPI, but you need to use the Canon PPDs which means the copier must have the kit installed Postscript printer and you get not the pretty picture base views the pilot UFR2 and PS to give you.

  Second point is that the Canon UFR2 and PS drivers, it is preferable to use HP Jetdirect-Socket to the LPD protocol. He sent larger packets and verifies the status of the target unit - LPD simply sends data to the fixed IP address so if the printer has a problem you don't get this information until you walk up to the photocopier.

  I hope this helps. Answer if you need more information.

• Cannot connect by Satellite A355 for a Canon IP Pixma 5000 on a LAN

  Recently, we purchased the Toshiba Satellite A355-S6925, which has the operating system Windows Home VISTA 64 bytes.
  The Canon Pixma 5000 printer is directly related to a Windows XP-based computer by using the 32-bit operating system.

  When I go to add a printer (Option LAN) the Toshiba sees Canon printer but then returns an error message that there is a bad driver. When you go to the next step, it says that it cannot find the correct "INF". I suppose the INF file is actually on the remote computer on which the printer is connected to. So a question, where is an INF printer on a Windows XP computer?

  A test, I plugged the printer directly on the Toshiba and the loaded Toshiba driver the printer. I hoped that could solve my problem, but it didn't. When I tried to add the printer, once again, like a remote printer I got the same error message that it could not find the INF file.

  The "Add a printer" Wizard see Canon printer on our LINUX computer. In fact when I added the printer connected to the LINUX computer, I can print from the Toshiba. While this works, it's a bad solution, because I'm still not able to print directly to the remote printer.

  Another experiment, I tried to use the printer installation disc, this was rejected by the Toshiba since he was a pilot of 32 bytes. I also downloaded from the site Web of Canon driver 64 bytes, but once again the Add Printer Wizard said that there was a missing INF file... So I always assume that I need to point to an INF file that is located on the Windows XP computer?

  Any advise?

  Great news and thanks for your comments!
  On the State of ink, you may have to contact the manufacture of the printer.

  Good day!

• PIXMA MP980 pilot for El Capitan

  PIXMA MP980 pilot doesn't work does not correctly for El Capitan can print but cannot scan... have searched and cannot find a download of the upgrade.

  The 980 Pixma is unfortunately not compatible with El Capitan, no driver available.

  Read the explanation on this link.

  http://www.Canon.co.UK/support/consumer_products/products/fax__multifunctionals/ inkjet/pixma_mp_series/mp980.aspx?type=d...

• Pro9000 canon printer problems

  For those who know Canon printer problems after upgrade to El Capitan, this is the site for you: https://goo.gl/Ga55aB specifically, I was getting crazy trying to reconfigure my Canon Pro9000 until I found this: https://goo.gl/naQKPl click on the box of pilots.  Voila!  He says there was no software available (and specified on the Apple site there is no solution), this driver worked perfectly.  Good luck everyone, hope this helps!  Deb

  Thank you thank you thank you for sharing the link!  So frustrating to hear nothing of Canon, when I asked him...

• I have a Canon ImageClass MF6540 Laser printer. Need to download the print driver necessary link

  My computer crashed.  I need to reinstall the printer Canon Image MF6540 of the class of the blade.  Don't have the original installation disc; can't find the link on the internet.  I just want to get this printer to print.  Requires no software.  Can someone give me a link to a print driver that will allow this printer to function.  I searched all over the web, even downloaded what apeared to be a pilot, but does not work.  Just need to simple link.  Thank you

  Hello

  Have you already found this page?

  http://www.USA.Canon.com/Cusa/support/consumer/copiers_fax/multifunction_copiers/imageclass_mf6540?s...

• Series of pilot MF4800 Windows 8.1

  I just bought a 4880 to replace an older machine that is perfectly feasible, 4150, because Canon never put win 8 drivers that worked well for scan on this machine. Understandable, I guess that, as he was old enough. The 4880 was great to work in Win 8 environment that's where I should have left things. But I checked the Windows compatibility site before moving on to Win 8.1, and this machine has been listed as "compatible".

  Well, it isn't. In fact, it is almost completely non-functional, with a capacity of printing limited, but no analysis or two-way communication with the PC. Imagine my frustration when I contacted Canon and they said: no, we have no driver and will "probably", but there is no way of knowing when. "Could be two days, could be six months," a rep said.

  So, I think to return. Pretty shocked Cannon would not have up-to-date drivers for the operating system that is currently sold on new PCs, especially when the BONE came out at the stage of developer for months. Someone else has more information about this, that is to say, it is useful to keep the machine in front of the back window on the chance that Canon could update the drivers? Meanwhile, be aware that if you have a machine of this series and wish to Win 8.1, you ask for it.

  Patrice,

  Thank you very much. In fact I recently did a large part of what you have described here. The process was somewhat different, because I have my printer is installed as a network printer wired for ease of use in all of my home network. But I did essentially the same thing: I removed all traces, I could find drivers, rebooted, disconnected from the network printer, printer connected in network (I don't use USB, learn from the mistakes of the past, then reinstalled WIndows 8 drivers from the Web site.) They seem to work for printing and scanning. (However I am not banking in the long term, I had my previous machine to work to Win 8 for a period of time, so it didn't.)

  Anyway. It is a pleasure for me to have to work for now. But I am confused as to why none of the three Canon support people I talked about this problem had no idea that the pilots would work. They all told me to sit and wait.

  Everyone out there in the thought of Canon-land on installation win 8.1 - I uninstall all the software on my machine, made the upgrade, then reinstall the drivers, that would probably solve many problems. (I got also remove and reinstall another Canon inkjet printer wifi running).

  Thanks again.