I have an inventel wireless USB2VGA USB, but I can't make it work on Windows Vista Basic.

Similar Questions

• I tried to install jk1351 plotter cutter drivers but just can't make it work.

  Original title: jk1351 cutter plotter usb drivers

  can someone helo I tried to install readers, but just can't make it work no matter what idears

  Hello
   
  1. what operating system is installed on the computer?
  2 is this mentioned USB-specific problem?
  3. were you able to install the drivers successfully?
  4. what happens when you try to run the cutting plotter?
  
  Note: Try again with different USB ports and see if that helps.
   
  Method 1: Follow the article if you have Windows 7 computer.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  
  Method 2: You can also try to check with the manufacturer and see what they have to say on this.

• Can I get help to install my web cam? I have the cam connected but I can't make it work.

  I would like help with my web cam, I can't make it work. Can someone please tell me what to do?

  Hello

  -What is the serial number and model of the webcam?
  -Is the webcam compatible with Windows XP?
  -What is the status of the webcam in Device Manager?
  -You get an error message?
  -Have you installed the latest drivers for webcam for your operating system?
  -Is the issue relevant to a particular application?

  Please see:
  How to manage devices in Windows XP

• I downloaded a 64-bit adobe flash, but I can't make it work. What should I do next?

  I downloaded a 64-bit adobe flash, but can't make it work. What should I do next?

  What is your graphics card, the driver version & date?  See http://forums.adobe.com/thread/945765

  Try turning off hardware acceleration improves the situation; See http://forums.adobe.com/thread/891337

• OfficeJet 6000 E609n print on USB. I can't make it work wireless

  HP Officejet 6000 E609n Win 7 64 bit

  My printer works on a USB connection, but I was not able to do

  function on a network wireless router connection.

  Router is Linksys WRT160N V3.

  I used all of the solutions recommended in the instructions from HP.

  OK, since you get the error "the selected printer is not present." during installation, here are a few troubleshooting that should help you narrow down the cause and resolve the problem:

  The printer is not found during Network Installation in Windows

• Targa files used to save the paths, but I can't make it work now.

  I use targa files provide my marketing team with images that work in their planning of space including the transparency program. I use an alpha channel to do this, and this part is working fine. However, I used to record these targas on our network drive and they would retain paths we created so that we can easily select different parts of products and change the color for the proposals of the marketing team wanted to do.

  It was a bit of time, because this feature has stopped working for me, and I can't for the life of understand me why.

  They take substantial resizing after the fact, just so their generation of the PSD file every time is not an option. There the images full size from time to time even when, and I don't speak of thousands of images. The size that should be on our network would make IT BM in their collective pants.

  Edit: I guess I would say that I've recently updated to CC, but I had this problem before then with CS5 as well. On a Mac, running the Mavericks.

  Targa files include not paths - there is no room for them in the targa file format.

  On Mac OS, some additional information (including access roads) used to be saved in the resource fork.

  But since Apple has deprecated the resource API, Photoshop CC stopped writing or reading resources.

  And record in a volume that does not support resources would have stripped the resource in any case data.

• Canon IP3500 printer works with Windows7 64 bit, but I can't make it work with my 32 bit Vista on a network computer.

  This configuration has worked with the previous XP machine in a network with Vista machine. After that replaces the xp machine, which is directly connected to the (now 7 machine) XP vista machine sees the printer but will not work. I get an error message indicating that the print server software does not work. I tried to install the driver on the machine 7 under x 86 drivers, but it fails to install. So in conclusion works-printing printer with Windows7 machine, but do not print when you try to send a print job using the vista across the network machine.

  Hi roboref,

  You will need to check if the file and printer sharing is enabled on the Windows 7 computer.

  To turn on file and printer sharing

   

  (a) Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

  (b) to expand the current network profile, click the chevron.

  (c) if printer sharing is off, under file sharing and printers, select Open file and printer sharing, and then click save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information please visit the link below.

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Insertion of an element with a css in muse html. This is a table with a fixed column in dreamweaver, I wrote, but I can't make it work.

  is there a way to do this miss me I tried to insert html objects, but not luck.

  Your code works well. A couple of things must be changed much.

  

  In your HTML code, remove the first line:

  Add your css to your CSS in the Page Properties in the Meta tab in the Head section. But you must also add the Style tag in your css. It would therefore be:

• I can't the WLAN to work. It shows that the drivers are there, but I can't always to work and pick up the wireless here.

  Original title: what I am doing wrong?

  I just reinstalled Windows XP on a blank hard drive (new).  I have installed WLAN driver disk resource. I can't the WLAN to work. It shows that the drivers are there, but I can't always to work and pick up the wireless here. What can I do?

  Hello

  The following articles may be useful:

  5 steps: how to set up your network wireless home
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095 
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• have place the sim card into the computer according to the instructions, but can't make it work

  Original title: sim set up

  I have acquired a dell inspiron duo and have place the sim card in the back according to the instructions, but can't make it work

  Hello

  You can buy a WWAN card to use a SIM card. You should also call your mobile service provider and check with them.

  Similar question has already spoken here: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/how-to-make-the-sim-card-work-in-studio-15-dell/4507610a-e4aa-4bfd-9e94-ed71a60ad550

• I have no sound in my computer, but I can see my sound card but still no sound.plzzzzzz help?

  I have no sound in my computer, but I can see my sound card but still no sound.plzzzzzz help?

  See if the following tutorials will help:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  He
  consists of 3 parts:
  1 check the hardware
  2. use a troubleshooting tool
  3.
  Updated drivers

  Diagnose and
  automatically fix audio problems
  http://support.Microsoft.com/mats/NO_SOUND/en-us

  He has a difficulty he asked along with other
  Related topics.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Audio Troubleshooting
  Problems
  http://support.Microsoft.com/GP/troubleshoot_audio_windows

• I have created a VPN connection and it worked but you can't see how to remove Windows 7.

  Delete the VPN connection

  I have created a VPN connection and it worked but you can't see how to remove Windows 7.  I tried rt-click but no delete option.

  Open network and sharing Center. On the left side, click on change adapter settings. You will get all VPN connections that have been created and you can delete what you don't need.

• I have an email with attached wps files but I can't open them im using windows 7, someone please help

  I have an email with attached wps files but I can't open them im using windows 7, someone please help

  It is a Microsoft Works file you need a viewer for. Have a look here.

  http://www.Microsoft.com/en-CA/Download/details.aspx?ID=4

  I hope this helps.

• Hello! I have a package of student! But I can 't download Ps and AI. my arrival of test period.

  Hello! I have a package of student! But I can 't download Ps and AI. my arrival of test period.

  Hi Kristina,

  If you purchased the product, but conclude that launch the applications in trial mode, you can try clicking the gear icon in the desktop CC application > Check For Updates?

  

  Often, this solves the problem.

  Let us know if this helps!

  -Madison

• Hi I have Lightroom 5.7.1 and try to make the panorama.  Photo/Edit in watch upward but somehow "Merge to Panorama in Photoshop" is grayed out.  How can I make it work?  How can I make panorama to 5.7.1?

  Hi I have Lightroom 5.7.1 and try to make the panorama.  Photo/Edit in watch upward but somehow "Merge to Panorama in Photoshop" is grayed out.  How can I make it work?  How can I make panorama to 5.7.1?  Can anyone help?

  Seriously Teddy5555, this isn't a problem with Lightroom.  If PhotoShop is not installed on your computer, then you cannot directly photos to edit in PhotoShop, nor can you merge to Panorama in PhotoShop.  If it is not installed, you must install it to make it work.

  6 LR and LR CC 2015 have the ability to merge with a Panorama in LR itself as shown below, but I don't remember if it was available in LR 5.