Canon MP610 CD Label Print on Win 7 - "no printer found".
Have a Canon MP610 which worked without problems on Vista. Acquired a new Acer all in one computer with Win7 and installed printer. Prints OK, vainly analysis software and software CD printing. The drivers downloaded and uninstalled and reinstalled for 64 bit win 7 - same mistakes. From LabelPrint, it reports "a compatible printer for printing CD media was not found. Don't know what else to try.
Have you installed all the win7 64 bit downloads available from the Canon site?
Tags: Windows
Similar Questions
-
Profiles of LR and Canon MP610 printer
For my birthday I recently got a Canon MP610 printer to replace my old i475D . Now before I have to engage in the path long and dusty - ok then, trials, and tribulations of printing from Lightroom with a lot of paper and ink wasted I have things right from the start. I have the general idea about printing from LR for example disabling ICM and let the application manage colors etc etc but it's the profiles themselves who have me a little confused and it is with regard to what I'm looking for advice.
With the printer, I received a package from Photo Plus semi-gloss (SG-201), but also we have in the range of Canon Photo Paper Pro (PR-101), Photo Plus paper glossy extra II (PP-201), glossy Photo paper (GP-401), Photo paper glossy "Everyday use" (GP-501) and paper Photo Mat (MP-101).
Now when printing Lightrooms module I click on color management > profile, I am presented with a drop-down list as follows: -.
Canon MP610 series GL2, ditto GL3, ditto MP2, ditto PR1, PR2 to Ditto, ditto PR3, ditto SP2, ditto SP3 - (ditto replacement Canon MP610 in each case obviously).
A nice person and knowledgeable please explain how these profile codes are codes of paper?
Here's a post on the forum on dpreview.com that can be useful.
Good luck
Scott Rouse
-
Communication problems scanner Canon MP610 with laptop
I have a Canon MP610 all in one printer, connected to a Dell laptop connected via a netgear wireless router and a Dell PC.
The MP610 runs perfectly with the PC, and I am able to print from the laptop, but when I try to scan from the laptop using the program 'Publisher '.
I get a notice stating "cannot communicate with scanner.
Hello
(1) what happens when you connect the scanner to a different USB port?
(2) is the device-specific question?
(3) what version of Windows operating system do you use?
You can try the following methods and check the status of the issue.
Method 1:
Try the procedure described below suggested article Canon.
Error message: "cannot communicate with scanner."
http://support-SG.Canon-Asia.com/contents/SG/en/8100065300.html
Method 2:
Configure the computer to clean start State to check software conflicts.
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the above article.
You can also post you question under support of Canon for help.
-
Delta print ticket information. No label 'print' on g.mail
Delta e-mail me ticket information in tools or at the top of the page there is no label 'print' for me to have the computer to print the document. I must have it to the airport. Thank you.
How about file > print?
Or use the standard Windows keyboard for printing - {Ctrl + P}command.
Do any of these work?
-
I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan. It prints very well I can't scan and save.
I can't find the printer drivers specifically for Yosemite on the Canon website. How can I get this analysis and save them? I have never installed this printer on my iMac.
Have you tried the Applications/Image Capture or VueScan?
-
How to send the order to T402 Zebra label printer with rs232
Hello
I use T402 Zebra label printer, communication cable series D9.
I want to send commands to the printer to the printer to print the date and serial number and barcode. How can I use the visa to send commands to the printer?
May be that someone is there to help?
Thank you
I don't know whether or not the printer you have has a real-time clock. I suspect that it is not. Therefore, you must format the date and time string in your LabVIEW code and just include this string in the label. The printer itself is not capable of producing, tracking and assinging the serial numbers of your Instrument. Your application will need to do and just like the date format of the specific string and put it in the label. I highly recommend that you download the ZPL Manual of www.zebra.com. I would include it here, but it's too big to be included as an attachment.
-
Zebra LP 2844 label printer troubleshooting
Hello. My printer is in working order as far as I know. However, the red light keeps coming up and I can't print a shipping label. It started when Microsoft 'security' did not like programs in Java, calling it a breach of security. I deleted the new form of Java and installed the older form, the printer has worked for a few days and now has the red light again all the time. I ran all the tests to restart the label printer 100 times I thought it was a problem of Java, not, I'm not sure that it isn't Microsoft. Need help please, I need my printer. I can print a label on my other printer paper very well. The Java "circle ride" on ebay and it lets me choose my Zeba LP2844 label printer, sometimes it works most of the time it isn't. I called ebay, nothing helps. Thank you, Susan
Contact the support of Zebra.
-
- I have a Canon 32-bit multifunction printer that worked with my old laptop. Again 64-bit works more computer portable printer nsns, what I can do.
Hello
Go to the Canon Website and search for your current operating system 64 bit printer drivers.
If none are available, it may be time to upgrade your printer.
See you soon.
-
error message indicates that the new 450 turbo label printer does not support the type of paper 119
error message indicates that the new 450 turbo label printer does not support the type of paper 119
Contact the society of the printer. There is nothing that Microsoft or Windows, can do to force the printer to accept a type of paper, though it says it will not accept it.
-
Canon MG5220 won't print black
My Canon mg5220 will not print black. I have refillable cartridges in it. I took the print head and cleaned. The cartridges have ink. Help, please!
Hi TeachSMH,
physical cleaning will get only the clean print head outside. Given that the nozzles are so tony they only can be cleaned through the cleaning process in the maintenance of the printer menu. Please try the following steps 2 - 3 times conescutively for best results:
-
My new HP Pavilion Desktop PC has no option for my old Canon Pixma iP 2600 printer usb connection
Greetings:
I can locate is no longer the installation disc for my my old Canon Pixma iP 2600 printer. I am able to install it w / add it as a printer in the Control Panel, but the Office feature fails to read that the printer is connected via the usb cord. I'm not find no possibility to install it as a usb printer. Please help as soon as possible. I can't afford to replace the printer and I have several documents that I need to print today or early tomorrow, or there will be dire financial complications for me. I NEVER had that problem w/Dell. (the operating system is windows 7, which is exactly what I was running on my old dell model - I searched this forum and find a similar question, but that the consultant has been able to find a usb option in the drop down menu to the port facility.) that option is absent in my attempts).
Thank you!
Interestingly, I discovered (after wasting a ton of time online and on the phone w/less useful HP tech) that the problem was in the two faulty usb ports on the front of this new processor. at this point, I plan to return to the model of costco and return to dell. Thank you for your help.
-
Specifying the Destination of Avery Label Printing
I have a hp 6700 premium all-in-one printer. I have an iMac OSX 10.9 running. (although I don't think it matters, does?). I'm trying to print an address label with the standard of 3 rows of columns x 10 Avery label paper but I want to CLARIFY that column and row to print to (so I can reuse the labels not printed on the page and run the page through the printer again and again until they are used to the top). Years with another printer and the computer I could do but I can't understand how doing it now with the software and the hardware. What can I do if I select an address to print from my Contacts list is printing it in the default location: 1st column, 1st row. And that would mean that only two labels can be printed by every label page (when I want to print a label), wasting the other 28. So is there a way I can print just a single label and specify that it print to, say, column 2, line 7 (for example)? Thanks for any help!
Hi MrBobboh,
I did some specific research label printing and found some information for you. First, I would like to point out something important, I found. "Do not feed more than once a sheet of labels into the printer. Re-use of a sheet of labels can result in damage to the glue of the label printer. Labels must cover the whole sheet No exposed spaces. »
Source: HP.com label printing
When you print labels, you would typically use a model. You can go to the website of the brand of paper and download a template.
Your question is "is there a way I can print just a single label and specify that it print to", the best way to respond, Yes with a model, but consider my first quote. By running the sheet of labels into the printer several times you take a risk, as this may damage the printer over time.
Click here to open the site Web of Avery
I hope this information is useful.
-
Installation of the label printer.
I know it sounds like a simple task. But ived tried 1 million different things. Ived contacted IT support in the hospital that I work in. And to make thins worse, it seems that we at the Denmark settle us with a solution that can easily cost us $ 100,000 per year, in the form of standard 10 x more ekspensive solution for each labels we print.
All because we are not able to choose any label printer.So what is the problem?
When we define a label in the printer driver, it seems that different environments are not able to read these formats.
We use a program called "BioBank regionernes. Ived tested if excel is able to read the profiles of the label that are made in the pilot.
He does not receive the rigth from the driver in excel or another format.However I can turn the printer of labels in the standard printer, and which seems to solve the problem of extracting the parameters defined by the pilot, in the external environment. But printing A4 format is seriously impaired when I do.
Support IT says that it must change the "standard printer' whenever we chose to go the printer of labels to a regular printer or vice versa.Help, please. should be VERY simple. but it is a headache ived have more than a month now.
Hello
Thanks for posting your question on the Microsoft Forum.
I suggest you to ask your question in the TechNet forums.
TechNet is watched by other computing professionals who would be more likely to help you.
I hope this helps.
_______________
Thank you best regards &,.
Isha Soni
-
More Canon MP170 iP4500 none print me el color negro
Patrick mi Canon iP4500, not me print el negro color, color TR prints el lo hay just in the pagina that print debo
Microsoft proporciona soporte sitio en frances responses. A Uniform Resource Locator (URL) here is entirely of Quebec reciba soporte para para information known location. Abre el issues y su select region in the list desplegable y haga click in el boton para continue flecha.
-
Print a PDF file on a label printer
Hello to save time trying to find a way to get a resized pdf so that it will print on my printer to label.
I tried to do it via the print settings, but have not progressed.
My thought/goal is that I type the address in the beginning of my form and this part of the form is filled in on another page for printing to the printer of labels. -No problem this creation.The main issue is the page for resizing to reduce the size of the labels to the printer, or scaling of the page to fit the size of the labels in the label printer.
Has anyone had experience with this?
Thank you for your time!
JOhnHi Bill
Thanks for writing - my mistake was that I had chosen (choose paper in pdf size) which seems to have solved my problem. Who was that my printer always said that the size of the paper was incorrect for the printer.
John
Maybe you are looking for
-
Have I broke my drive of fusion?
Hi all I have an iMac 27 "end 2013, with a 1 TB fusion drive. I had all sorts of problems of implementation of bootcamp - so I decided to take the plunge and reinstalling OS x on my Mac as a clean install - I created a bootable El Capitan installatio
-
Google Cloud Print setup - impossible to analyze the capabilities of the printer
I am trying to add my CP1525nw to Google Cloud Print as a Cloud, and not as a LOCAL printer printer, however every time that I add my eprint email I get the following message. "Impossible to analyze the capabilities of the printer" - I tried for publ
-
Satellite A200-196: where to find Windows XP drivers
I tried to install XP on the laptop A200-196, but can not find the drivers for XP for it. Does anyone know of any where I can get them? I tried to search but came up with nothing and the Toshiba site has only drivers for Vista, which is a bit frustra
-
Airport base station utility is not compatible whit
"I bought an Airport Express 2005 model, when I try to connect to my Macbook pro, I get the message: this version of Airport utility is not compatible whit this base station. Any suggestion on what to do? Thank you.
-
sabortooth 990fx mother bd. AMD 8 core processor 32 g/memory part of /ntfs SATA hard drive. Fine load Win7 and will accept the victory 8 with no problems. However, I use win 7 on a different computer and nto wonted upgrade using my my old computer wi