Capacity of the hard disk on ESXi 4.0

Similar Questions

• Increase the capacity of the hard disk for VM

  Hello

  I use ESX 4.0 with vSphere 4.0.

  When there is no snapshots more I would like to increase the capacity of the hard disk of the virtual machine in the menu to change settings / Hard disk. There is MS Windows Srv 2008 R2 64-bit installed.

  What is the right way to do it? Operating system, there is no problem with this increased disc? Primary partition will automatically increase as or what I have to do it myself later?

  There should not be problems with the guest operating system when you increase the size of the virtual disk. After the increase in size in the settings of the virtual machine, you need to resize the NTFS partition in the VM Windows 2008 disk management.

  André

• Capacity of the hard disk on the Qosmio G20-139

  I recently bought the notebook of Toshiba Qosmio g20-139, announced as having an 80 GB hard drive. Check the properties of the drive C: I think capacity is 69.8 GB. And in the properties of the device, it gives the Volume 71547 MB (I presume it's 71,547 GB).

  Does anyone can ease my mind explaining to me why I have not been 'ripped off '?

  Thanks in advance.

  Hello

  I'm not 100% sure but I think this part of the HARD disk is not partitioned and it comes preinstalled Qosmioplayer. This player doesn't need all the space, but if recording on this drive is available, I presume that this registered program is also recorded on this unpartitioned part.

• After you install Windows Vista, the maximum capacity of the hard disk reduced 80.0 GB to 3 GB

  Original title: reinstallment recent Windows vista has me to the maximum capacity of my hard disk (80.0 gb) why? __

  I recentlyreinstalled my windows vista, everything seemed to look and will work perfectly, so I decided to see how much space was left on the hard drive. My surpise there was only 3 GB of 80.0 gbhard drive. Now I'm sure that you would agree wiyh me and say that there is something wrong when installing on if so what can I do about it? You, I noticed there are some files like programs program then theres (86) below I see only in a few different places, as well as many files sent a text message if they are from my old program as if they never got deleted or formatted.

  Thanks for listening

  Hello

  ·        Did you do a clean install of Windows Vista without formatting?

  ·        How many letters pilot are there on the system, for example C:\, D:\?

  ·        The number of records your C:\ drive?

  Open C:\ drive and select all the files that are present and check what size is (of all files). Let us know the size.

  If you did a clean installation without formatting then, it may be a folder named windows.old. If you have the folder on the system, then follow the steps mentioned in the article below.

  How to use the disk cleanup feature to delete the Windows.old folder after you install Windows Vista

  http://support.Microsoft.com/kb/930527

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Inspiron N5050 shows the capacity of the hard disk bad

  I put a new 1 TB HDD in my Inspiron N5050 to replace the 500 GB one. I moved all my content on the new hard drive using the disk image and repair system I did of the old hard drive. Now when I go to "computer" it always shows the hard disk of 500 GB (actually 468) not the 1 TB hard drive. How to make the computer recognize the appropriate hard drive capacity? Sorry if I posted in the wrong place, I didn't know where to put this post because he could be in several places.

  I found the answer to my question on YouTube (of all places). I have now 1 operation section entirely on my hard drive (no unallocated space). I should have done a little more research before posting here, but thank you Dell community with his presence. PROBLEM SOLVED!

• Capacity of the hard disk for NX9030

  Hello

  I have a laptop HP Compaq NX9030. The hard disk starts to show errors so I intend to replace it. Does anyone know if the laptop has a limited capacity for replacement hard drives?

  Thank you

  Dave

  You have the Intel 855 chipset. In order to launch a hard drive larger than 137 GB, you need help for 48-bit Large Block Addressing in the chipset, BIOS and operating system. I find contradictory information on the ability of the chipset 855 doing of 48bits LBA. I also wonder if ever taken HP worth of produce a BIOS that would make 48 bit LBA in this model being the biggest hard drive offered 60 gigs. In other words, I think you should assume 120 GB is size max hard drive you can use and the only way I can think to prove otherwise is to buy the largest disk and install it. Windows XP Sp1a and superior does not large drives.

• Satellite C650 - Question about the capacity of the HARD disk

  I just bought a Satellite C650. The specifications indicate 320 GB hard drive, but the diagnostic system indicates the disk space is 286 GB (free capacity is GB 261).

  Please indicate why this might be the case.

  Hi 12345,

  It is normal that you lose disk space after formatting the drive. 286GB is the normal capacity of a formatted hard drive 320, so everything is ok with your laptop.

  If you want to learn more about capacity on hard drives and need more technical information, why you only 286GB you can read this interesting Wiki:
  http://en.Wikipedia.org/wiki/Hard_disk_drive#capacity

• Pavillion Dv4-1225dx do not fully recognize the capacity of the hard disk

  Recently I replaced the OEM hitachi hard drive (SATA 250 GB at 5400 RPM) in my Dv4-1225dx. Replaced by a WD scorpio black 16mg buffer 320G 7200 RPM / min. system registers only one size of 298G drive despite the fact that the player goes out very well with the Western Digital diagnostic tool and check the bios of the system HDD Pavilion. Is there a BIOS setting that is to limit the ability of the systems to recognize more than 300 GB drives? If there is, I'm not, the Bios (BIOS latest worm d.55) hid all the settings that I'm used to seeing on other laptops. If anyone has had this problem, or have any ideas of what I should look at? Thanks in advance...

  Hello

  rdcnaz wrote:

  Recently I replaced the OEM hitachi hard drive (SATA 250 GB at 5400 RPM) in my Dv4-1225dx. Replaced by a WD scorpio black 16mg buffer 320G 7200 RPM / min. system registers only one size of 298G drive despite the fact that the player goes out very well with the Western Digital diagnostic tool and check the bios of the system HDD Pavilion. Is there a BIOS setting that is to limit the ability of the systems to recognize more than 300 GB drives? If there is, I'm not, the Bios (BIOS latest worm d.55) hid all the settings that I'm used to seeing on other laptops. If anyone has had this problem, or have any ideas of what I should look at? Thanks in advance...

  

  The missing space is called disk overhead. I'll show you and example. The image is that of a STAT 500 GB drive. In fact only 465 GB is used.  The calculation is simple. Please keep in mind that a kilobyte is actually 1024octets.

  Best regards

  ERICO

• Cannot increase the capacity of the hard disk

  ESX3.5 VI

  A VM, Widnows 2003 OS,

  I tried to increase the HardDisk1 from 8G to 15G, I saw the following:

  Capacity

  Drive Size (GB): 8,00

  Size maximum (GB): 250.85

  New size: 8 GB

  So I changed the 8 to 15 on the new waist line.

  OK the settings.  Now, when I go back to settings, it changed to 8G! What is c?

  OK the settings. Now, when I go back to settings, it changed to 8G! What is c?

  Are their active snapshots on this virtual machine?

• Re: Tecra A7 - what is the maximum capacity of the HARD drive?

  Hi all

  Is there any BIOS, hardware limitation of a hard drive replacement for Toshiba Tecra A7? I'm looking to install 500 GB hard drive. Will it work?

  Thank you
  Matt

  Hello

  As I know there is no limit of capacity on the HARD disk for Tecra A7 already has a SATA interface and a controller for the HARD drive.

  So, theoretically, 500 GB should work fine, I don't see a reason why it shouldn't work.

  But you could give us a feedback here, how it works with 500 GB! ;)

• Satellite A500-1 - What is the maximum capacity of the HARD drive

  Hello

  I have to re - install the factory installed Win 7 on my Satellite A500-1 because I'm not able to install SP1.
  The cause is that inside Win 7 product information is missing.

  With regard to what I like to install a new HARD disk with more capacity (400 gb current).

  What HARD drive I can install and what is the maximum capacity (1 TB, 750 GB)?

  BIOS is updated.

  Any advice is welcome.

  Thanks in advance

  Hello

  To my knowledge, there is no limitation of the capacity of the HARD disk since the SATA controller is used and the SATA controller should support over 400GB.

• installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  installed the file ISO of ESXI 5.5.0 of trialware on a PC at home that has a memory of 8meg, installed correctly, then on reboot I get 'no boot disk was detected or the drive failed', I'm boot from the hard disk, any ideas?

  Welcome to the community,

  Please take a look at for example http://wp.secretnest.info/?p=697 to know if this is the problem you are facing.

  André

• Move the existing 5.5 ESXi installation of the HARD disk on USB.

  I need help on what would be the best approach to move my existing ESXi 5.5 install the HARD disk to the new USB.

  Then you tell your environment uses the local disk to your VM data store (s)? In addition, you want to move your partition ESXi to USB and recover the local disk space? I think if it was me, the the more safe thing to do would be to shut down the system, pull on the local drive on just enough to disable / he dethrone, insert the USB key and run ESXi installation. Then (after checking the boot order) reinstall the local disk and boot the system. Once the USB key version boots, make your configurations (DNS, NTP, license etc.) and add the data store (s) existing local drive. You can then add existing virtual machines via "navigation" of the data store (s).

• Confused about the capacity of the HARD drive on my new Equium L350

  I'm rather confused (normal state) about the capacity of my hard disk. This is supposed to be 120 GB but... On 'My computer', it shows that I have 23 GB of 55.7 left GB on Vista C and 49.8 54.5 on E of data that is delivered to about 110 GB.

  I'm already about 10 GB missing but maybe that is taken up with hidden files. More worrying is that I have so little space on Vista C. Can I save files on the data partition, or is that a no-no? So far, everything I've loaded on it goes into Vista C.
  Any help would be appreciated.
  Thank you

  I agree with InvaderZim.

  But there should also be another reason why the two partitions of HARD drive are smaller than the whole HARD disk.

  I assume you are using the Vista operating system.
  Vista uses hidden for some files from recovery partition.
  If you check the Disk Manager, and you should see all available on your HARD disk partitions.

  See you soon

• No space is available on the hard disk

  How do/peut/must clean up drive C:?

  I deleted all the music, photos, videos, documents, games, system, etc. I managed to get rid of anything that might save space on my drive C. I have now only use my pc for Microsoft Word and then I emailed to the doc (s) and print before deleting (not enough space on disk to keep the docs). I always get a message that my hard drive is full. There's nothing on my drive hard drive but that Microsoft Vista has put here...

  Ideas: Vista has a mind of your own! I'm not a genius of pc and should not have to be pc to operate.

  • Gateway GT5618E / Vista
  • No free space on hard drive
  • Removed all pc (music, videos, photos, docs, etc.)
  Recently bought a Macbook Pro and love it. Dilemma: Do not want to put Microsoft Office or any other Microsoft application on my Macbook because of the bad experience of Microsoft.

  Hello

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  You may want to transfer some data, images or documents on removable media like USB keys,
  External USB (my choice) or even CD/DVD readers (make multiple copies if the use of these).

  -----------------------------------------------------

  Info:

  System restore usually holds 15% of disk space and updates that are necessary for running computer
  consume even more. Backup - Options of recovery and even MS updates and those of HP, Dell
  or similar manufacturers use the space if your charging system. There are also overhead for the readers are not
  format to their maximum capacity.

  Where all my disk space? (Vista) - good writeup
  http://Forum.NotebookReview.com/showthread.php?t=167983

  Hard disk space Vista shrinking and reducing anomaly
  http://www.mydigitallife.info/2007/07/04/Vista-hard-disk-space-shrinking-and-reducing-anomaly/

  ----------------------------------------------

  It will show you how disk space is being used.

  WinDirStat - free - use to make sure you know what is too much space.
  http://WinDirStat.info/

  -Free - TreeSize tells you where precious space has gone to
  http://www.Jam-software.com/treesize_free/

  Also run Disk Cleanup:

  Start - All Programs - Accessories - System Tools - Disk Cleanup.

  Use the WinDirStat or TreeSize and these other tools.

  DiskMon - free - an application that logs and displays all the activity of the hard disk on a Windows System.
  You can also reduce DiskMon in your system tray, where it acts as a disk light, presenting a green
  icon when there is disk-read activity and a red icon when there is a writing activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896646.aspx

  Process Monitor - free - a monitoring tool for Windows that shows real-time file system,
  The process/thread activity and the register.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  Manage - free - a utility that displays information about the handles opened for any process in the system.
  You can use it to see the programs that have an open folder, or to see the types of objects and the names of all
  the handles of a program.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896655.aspx

  -Free - Process Explorer shows you information about the handles and DLLs processes have
  opened or loaded.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Sysinternals - many free tools
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  ---------------------------------

  OpenedFilesView - Free displays the list of all the open files on your system. For each file opened,
  additional information is displayed: handle value, read/write/delete access, position in the file, the
  process that has the file open and more...
  http://www.NirSoft.NET/utils/opened_files_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.