Caps lock light does not illuminate

Similar Questions

• Satelite P50-A-14F - Caps Lock key does not work

  Hi all

  My CAPS LOCK key does not work on my laptop series satellite P50-A-14F. Just realized while writing an email that does not work, so is more or less sudden. Nothing has been spilled on it. Here's what I've checked so far:

  -green light indicating that CAPS is LOCKED turn everything on by pressing the key on the keyboard of the screen
  -Keyboard backlight does not start when I press the button, but it works for the key itself when you press a button any.
  -try a clean boot but no results.

  Thanks a lot for your help.

  Hello

  > Just realized while writing an email that does not work, so is more or less sudden.

  Have you tested the button LOCKING of upper CASE using different software: Web browser, by word or any other editor?
  How about using the external keyboard?

  From my point of view, there are two possible malfunctions: either there is a problem with the software that you use or the internal keyboard works badly simply and in this case, the replacement of keyboard will solve the problem.

  You could test the external USB keyboard. In case the button LOCKING of UPPER USB external keyboard functions, then the internal keyboard needs to be replaced for sure.

• Satellite Pro M70: "Caps lock" light will not stay

  After repairs to toshiba in my brand-new laptop pro M70 (System Board has been replaced) I noticed that the caps light does not work when the caps is on. The bulb works as it lights up when you press the caps, but there are not on.
  Although the installation of ceiling works I don't know when the caps lock button is enabled or disabled. Very confusing.

  Any help is greatly appreciated. I am running MS windows XP pro.
  Brendan was soon

  Hello

  You suggested that this light doesn t work since the replacement of the motherboard.
  Am I wrong? In my opinion this is something mechanically. Can not solve yourself.
  In this case I recommend to contact the ASP again and explain the situation. Generally, the warranty should cover the repair procedure.

• "Accu full, 100%" but the green light does not illuminate.

  Until today, the light load on the front of the laptop went from yellow to green when the charge reaches 100%. It remains now to yellow.

  No idea why - and how to fix it?

  Thank you.

  Hello

  What brand / model of the laptop?

  If the light does not change to green and the battery is not getting fully charged. Try the methods provided and check.
   
  See the link, then run the Fixit.
  The problems of power consumption and extend laptop battery life
  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us
  Method 2:
  
  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

• Change the source of entry with the Caps Lock key does not

  It should be possible to change the input source with the Caps Lock key on macOS Sierra.

  and I checked "Toggle ABC of input source with caps lock shift" in system preferences > keyboard > input Source.

  However, it does not lock shift still only works as long as CapsLock

  I tried to reboot, reset the keyboard shortcuts, deactivation of Siri, reset NVRAM and reset the SMC, but still does not.

  I use only the default input source and have not installed and related programs to the keyboard or input source.

  Can anyone help?

  Thanks in advance.

  Greetings slwsbl!

  Thank you for using communities of Apple Support.

  I see that you want to change the input source with the SHIFT key on macOS Sierra. I understand the importance of wanting to use a specific key when changing inputs. I'm happy to help you with this.

  It is possible to do. Please take a look at the User Guide helps Mac, specifically, this section:
  
  

  Switch between input sources

  To switch between input sources, do one of the following:

  • Use the menu entry: Click on the menu entry in the menu bar, and then choose the input source. If an input source is dimmed, the current application does not support it.

  • Use the Caps Lock key: Press the caps lock shift key to switch between a non-Latin input (such as the Chinese or Korean) source and an input source Latin (for example, French or English).

    To use this method, you must select the option "use Caps Lock to toggle to and from" in the stream of input methods. Choose the Apple menu > System Preferences, click keyboard, and then click input methods.

  • Use keyboard shortcuts: Press control-Option-space bar to select the source of the following entry in the menu entry, or control-space to select the previous input source.

  Best regards.

• Caps lock indicator does not not in firefox

  just installed firefox last 8 and caps does not show indicator on my asus eee pc 1001px where it should be on the bar spots. When I exit firefox and go to the mail program, it's ok. any body you will suggest a solution. Cheers, ian

  Everything you just mentioned has to do with third party products.  The indicator that see you in your bar tasks is not Windows XP, the browser you are using is not Microsoft.  ;-)

  You must first contact the manufacturer who provided the application of the indicator, then Mozilla (although you will have more luck with the first.)

• Pavillion g6 power taken computer flashing light does not illuminate

  My Pavillion g6 will not contribute to that. Blue light, which is plugged the charger in flashes. I tried another charger. It still does not work. When you press the power button the button light doesn't even light.

  Alpost,

  It sounds like a problem with your motherboard; do you know if the computer is still under warranty? If you are not sure, take a look at this linkto confirm.

  Please answer as soon as possible.

  Thank you

• MWI light does not illuminate

  I use CCM3.3 (5) with the 4.0 unit (5) MS Exchange.

  I had Setup for failover of the unit and worked well. but I can't get the MWI switch work. The phone is able to compose the MWI extension, I opened the port status monitor and update the status of the MWI, I see that the port is 'component the MWI', but the light comes on.

  I followed the guide MWI, troubleshooting and the notifier showed code "12" and the task is complete. But in the newspapers of Miu, I can't find the command SetMWI. I changed the message to be always urgent in subscriber > Message, the led always lights.

  Any thoughts?

  Thank you

  When you manually dial MWI or disable the phone number, it turns the light (or turn off)? You said, he does not fast busy...

  Now, in the traces, look for dd = "1234" where 1234 is your MWI on or off number...

  This is where you should start. It will tell you what partitions it is looking, in the analysis of the figures etc... If all goes well, he will tell what is happening. Feel free to post the tracks here.

  Info that you have given us, it looks like a MAC problem.

• Pavilion Elite m9500y: indicator light does not illuminate

  Start button / stop is pushed to market, the fans begin to turn, but the power button the led does not light (usually blue when on, orange when it is idle), and nothing appears on the monitor (which goes to sleep). Computer is around 3 years. Any ideas?

  Try a reset, works "sometimes". Unplug the appliance, the power button for about 30 seconds. Reconnect the power cord and see if any difference.

• Wireless light does not illuminate.

  I have a Compaq vista Professional running, I type light wireless on the Panel (above the keyboard, under the screen) with my finger. It does not start. Can someone tell me what is happening. Thank you
   
  tntbob

  Hello

  Try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the power button for a minute.  Reinsert the battery, connect the power adapter and start Notepad - this has any effect?

  Kind regards

  DP - K

• Caps lock indicator does not.

  I've recently been messing around in the msconfig and services.msc trying to streamline things. Also, I went to the back office database, but switched to an aero theme. Now the screen to jump to the top of the indicator for the caps lock no longer works. I have no idea what the status of the caps lock shift is without him, because there is none on the keyboard. How do I get this on?

  Am having this problem also.  I know the rocker, but prefer the screen caps lock indicator.  How can I activate the indicator of the screen?

  Hello

  I think that the message of contextual text for the Caps Lock key is an element that is installed by the computer manufacturer. See the computer documentation or ask the computer manufacturer about this.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Equium A300D - 16 c touch sensitive light does not illuminate

  I have a 16 c on Windows Vista Edition A300D Home premium and touch sensitive lights used to light up when I press the first button to turn on, but the lights work again simply not always where I want the equium inside sign should illuminate.

  Thank you

  Hello Jonny

  These buttons are controlled by the Toshiba button support utility and this utility is part of the package of added value. To be honest I don't know if there is way to toggle buttons features, but if you want you can try to follow:

  Remove the system pre-installed VAP (Control Panel > programs and features), restart the computer and install the last PPV for your laptop model Toshiba Support page under http://eu.computers.toshiba-europe.com > support & downloads.

  Please let me know if everything works well again.

• HP Deskjet 3940v - light does not illuminate

  I have a printer HP Deskjet 3940v is the old model, but as a State new, bought new. HP offers more support for this printer because of his age.

  Currently, I have a question (no response from the printer) ahd that I had to uninstall the printer. My laptop is a Sony Vaio with Windows Vista svc pack 2.

  HP Support says that the driver is on my Vista operating system

  I also of course the original CD supplied with the printer. I inserted the disc and the installation program began, but I received error messages saying that 4 files in the registry is not found so installation was interrupted and could not continue. (see attachment I made a screenshot of one of the messages, the other 3 were similar in content)

  I connect my printer via a USB cable.

  The indications are as follows:

  Looks like you are having feeding problems with your printer. This may or may not be a problem that can be solved, honestly speaking of what you describe. This is a documentation of support on the issue, you are facing:

  http://support.HP.com/us-en/document/bpd05351

  The main question from what I have for you, is to see if there is a light on your adapter. If there is not a light on the adapter, it is likely that this piece that came out. You'd probably be able to receive a new (at cost) of HP that might solve your problem.

  In General, however, if you are having feeding problems it is more effective in cost and practicality to replace the printer.

  I would like to know if this information is helpful!

  Have a wonderful day!

• My ACER Aspire M5100 9-in-1 card reader does not work. Green light does not illuminate.

  The 9-in-1 card reader no longer works.  The Green led lights when I insert an SD card.  I tried to restart.  Cannot find the driver for the card in the Device Manager.  Does anyone know how to fix this?

  Thanks for all your help.  I solved the problem by turning off the computer, open the computer case and disconnect the cable card 9 in 1 black of the motherboard.  Then I restarted the computer and it re-installed device drivers (message Windows came).  For the first time, card reader devices actually appeared in Device Manager.  Then I turned off the computer, reconnect the cable black and rebooted.  Now everything works fine.

• Interruption due to the light wireless wireless connection does not illuminate

  I have a 4330 s HP's Probook

  I can't connect wireless in reason, wireless led light does not activate, I don't know if I need a driver, but I guess that all drivers are real.

  hope someone can support me in this case.

  Thanks in advance for your support

  Original title: wireless connection

  Hello Ruka,

  Thanks for choosing the Microsoft forums.

  I understand that you can not connect to the internet using the Wi - Fi connection on the computer.

  I would like to know some information about the problem so that we can help you further.

  You did it all change hardware or software before this problem?

  Try the following and see if they work for you.

  Make sure the wireless, as the function key switch for the wireless is turned on. Please refer to the user manual that came with the computer.

  Method 1.

  Try to use the network for Windows 7 troubleshooting:

  http://Windows.Microsoft.com/en-AU/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2.

  Please try to look in the Device Manager for any exclamation point in Device Manager.

  Check the network card

  1. click the Start button picture of the Start button, type "device manager" in the search box and then in the list of results, click on Device Manager. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2 expand adapter option and then check for any point of exclamation.

  Is there an exclamation point on found network adapter, then we troubleshoot the missing or corrupt wireless drivers. And we must also update the latest driver wireless from the manufacturer's Web site.

  To install the latest drivers for network adapter from the computer manufacturer Web site:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_bd9b6997fbc7fc515f4cf4626f5c8d01=wsrp-navigationalState%3DswEnvOID%253D4059%257CswLang%253D%257Caction%253DlistDriver&javax.portlet.tpst=bd9b6997fbc7fc515f4cf4626f5c8d01&sp4ts.oid=5045451&ac.admitted=1393314132234.876444892.492883150#Driver

  Method 3

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 4.

  Why can't I find a wireless network?

  http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-7

  Additional information:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows/cant-connect-Internet#1TC=Windows-7

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/wireless-networking-FAQ#1TC=Windows-7

  Wireless light does not illuminate

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/wireless-light-does-not-turn-on/TD-p/894811

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help you.

  Thank you.