Equium A300D - 16 c touch sensitive light does not illuminate

Similar Questions

• "Accu full, 100%" but the green light does not illuminate.

  Until today, the light load on the front of the laptop went from yellow to green when the charge reaches 100%. It remains now to yellow.

  No idea why - and how to fix it?

  Thank you.

  Hello

  What brand / model of the laptop?

  If the light does not change to green and the battery is not getting fully charged. Try the methods provided and check.
   
  See the link, then run the Fixit.
  The problems of power consumption and extend laptop battery life
  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us
  Method 2:
  
  Battery meter: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/battery-meter-frequently-asked-questions

• Equium A300D - update Toshiba ATI display driver does not work

  Hello

  Has anyone else found the Equium A300D PSAK2E Windows Vista 32 bit download Toshiba ATI display driver will not download center work? If you choose Run, download causes crash windows Explorer during installation and the upgrade fails, even to save and installation do not install it.

  I tried to get the TV out S-video port work. See the thread on the TV does not. I've tried everything. does anyone else have this problem that Toshiba are not aware of any problems with the S Video TV out not working only not on this machine.

  Thanks Vince

  I ve checked the download from Toshiba Europe site, and there is no problem with the download. The file is approximately 96 MB and I downloaded it for about 40 seconds.

  The question is: how you tried to install the display driver?

  Anyway, who knows how you use the S-Video option and what can be the problem. According to your announcement you didn t get answer from Toshiba about it. Am I right about that?
  To be honest I don't think that there is a problem. The fact is that how to use the cable S-Video with TV is the same for all models laptops.

  Can you please explain to us how you try to see the desktop on your TV with the S-video cable?

• iPod touch 5th generation does not illuminate.

  I got this iPod since the end of 2013. The home button has stopped working for a period of one month. Last night my battery was sufficient to last for several more hours, my iPod worked perfectly well. Then when I go to check this morning, it does not work. Not at all. When I tried to look it up on the way to solve the problem on Apple support, someone explained how try restarting it through the power and the "home" button. However, even once my home button does not work. I tried holding down the power button, then pressed on and even once tried to plug it into the charger to the wall, he still won't turn. Another user said try to connect to Itunes to see if I can restore it, ultimately, it failed for the fact that Itunes does not recognize it. I could really use some help.

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• Pavillion g6 power taken computer flashing light does not illuminate

  My Pavillion g6 will not contribute to that. Blue light, which is plugged the charger in flashes. I tried another charger. It still does not work. When you press the power button the button light doesn't even light.

  Alpost,

  It sounds like a problem with your motherboard; do you know if the computer is still under warranty? If you are not sure, take a look at this linkto confirm.

  Please answer as soon as possible.

  Thank you

• MWI light does not illuminate

  I use CCM3.3 (5) with the 4.0 unit (5) MS Exchange.

  I had Setup for failover of the unit and worked well. but I can't get the MWI switch work. The phone is able to compose the MWI extension, I opened the port status monitor and update the status of the MWI, I see that the port is 'component the MWI', but the light comes on.

  I followed the guide MWI, troubleshooting and the notifier showed code "12" and the task is complete. But in the newspapers of Miu, I can't find the command SetMWI. I changed the message to be always urgent in subscriber > Message, the led always lights.

  Any thoughts?

  Thank you

  When you manually dial MWI or disable the phone number, it turns the light (or turn off)? You said, he does not fast busy...

  Now, in the traces, look for dd = "1234" where 1234 is your MWI on or off number...

  This is where you should start. It will tell you what partitions it is looking, in the analysis of the figures etc... If all goes well, he will tell what is happening. Feel free to post the tracks here.

  Info that you have given us, it looks like a MAC problem.

• Pavilion Elite m9500y: indicator light does not illuminate

  Start button / stop is pushed to market, the fans begin to turn, but the power button the led does not light (usually blue when on, orange when it is idle), and nothing appears on the monitor (which goes to sleep). Computer is around 3 years. Any ideas?

  Try a reset, works "sometimes". Unplug the appliance, the power button for about 30 seconds. Reconnect the power cord and see if any difference.

• Wireless light does not illuminate.

  I have a Compaq vista Professional running, I type light wireless on the Panel (above the keyboard, under the screen) with my finger. It does not start. Can someone tell me what is happening. Thank you
   
  tntbob

  Hello

  Try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the power button for a minute.  Reinsert the battery, connect the power adapter and start Notepad - this has any effect?

  Kind regards

  DP - K

• Equium A300D Multimemedia keys doesn't work does not correctly...

  Basically, I had the laptop for about 4 months and for a period of time sensitive multimedia keys in the upper part of the keyboard lost their illumination, and whenever I tried to press the one who was supposed to enlighten them, he just cut my volume: S

  Now, they are light up again, (did himself when I rebooted once) but mutes still key illumination and the ("Fn" + F number) function keys don't seem to work. for example - disable control mousepad on FN + F9 and light control on FN + F2.

  Anyone got any solutions?
  If I have to re - install drivers can someone tell me what one I should look for, because it doesn't seem to be a "multimedia keys' one.

  Hello

  I m not very well, but I recommend to reinstall the Toshiba value added Package.
  We must first remove the old VAP and after restarting again install the value-added Package downloaded from the page of European driver of Toshiba.

  Welcome them

• Equium A300D - 16 c: USB/eSATA port does not work after disasembling

  Hi all

  I have the above machine which worked very well, so quite extraordinarily hot.
  I decided to open it and clean the dust, etc. of radiator and nowhere else that had gathered inside the case. All good, I thought...

  However, when reassembling it, 2 usb ports left (including one combined USB and eSATA) have stopped working!

  I could understand if it were those on the right who are on a daughter card, (for example if I forgot the cable), but they are part of the motherboard. I checked by plugging in various devices that work in good, but not the left.

  Check between the + and - ports with a multimeter, I get ~ 5V from the right and nothing from the left, even if at some point, I register 0.3V.
  I tried the network port that is correct, but cannot test the eSATA part as I have nothing to connect.

  Anyone has any idea what this could be?

  Thanks in advance!

  ige87

  > Control between the + and - ports with a multimeter, I get ~ 5V from the right and nothing in the left
  This means that there is no power on led USB port.
  To be honest, I have no idea what you did during the computer laptop disassembly procedure but it seems that damage you something on the motherboard.
  For me, it is a plausible explanation.

  Just a tip; check if eSATA is enabled in the BIOS.

• My ACER Aspire M5100 9-in-1 card reader does not work. Green light does not illuminate.

  The 9-in-1 card reader no longer works.  The Green led lights when I insert an SD card.  I tried to restart.  Cannot find the driver for the card in the Device Manager.  Does anyone know how to fix this?

  Thanks for all your help.  I solved the problem by turning off the computer, open the computer case and disconnect the cable card 9 in 1 black of the motherboard.  Then I restarted the computer and it re-installed device drivers (message Windows came).  For the first time, card reader devices actually appeared in Device Manager.  Then I turned off the computer, reconnect the cable black and rebooted.  Now everything works fine.

• HP Deskjet 3940v - light does not illuminate

  I have a printer HP Deskjet 3940v is the old model, but as a State new, bought new. HP offers more support for this printer because of his age.

  Currently, I have a question (no response from the printer) ahd that I had to uninstall the printer. My laptop is a Sony Vaio with Windows Vista svc pack 2.

  HP Support says that the driver is on my Vista operating system

  I also of course the original CD supplied with the printer. I inserted the disc and the installation program began, but I received error messages saying that 4 files in the registry is not found so installation was interrupted and could not continue. (see attachment I made a screenshot of one of the messages, the other 3 were similar in content)

  I connect my printer via a USB cable.

  The indications are as follows:

  Looks like you are having feeding problems with your printer. This may or may not be a problem that can be solved, honestly speaking of what you describe. This is a documentation of support on the issue, you are facing:

  http://support.HP.com/us-en/document/bpd05351

  The main question from what I have for you, is to see if there is a light on your adapter. If there is not a light on the adapter, it is likely that this piece that came out. You'd probably be able to receive a new (at cost) of HP that might solve your problem.

  In General, however, if you are having feeding problems it is more effective in cost and practicality to replace the printer.

  I would like to know if this information is helpful!

  Have a wonderful day!

• Caps lock light does not illuminate

  Caps lock light won, t turn on. Vista.   HP laptop

  Hello

  Ask that a specific question about a particular piece of HP provided material, I suggest that you ask in the Forums of HP's Support at the address provided here.

  http://h30434.www3.HP.com/

  See you soon.

• Touch Pad v7.5 light does not, if I turn off the red light button lights up.

  Synaptics Touchpad white light v7.5 works do not, if I turn off the TouchPad, the red light does not illuminate. Is there a fault or is it possible to turn it on?

  The TouchPad seems to work fine

  Thanks for the ansswer...  He solved the problem.

• PPP light does not blink

  The ppp of light does not illuminate & cannot connect 2 sites only 2. Always have access to all other Web sites & email. What can I do to fix this?

  Hello

  These websites is secure? You did changes to the computer?
  What Internet browser do you use?

  Method 1.
  For modem problem, you can contact the modem manufacturer. As far as websites are concerned, I would ask to add these sites to the zone of confidence and check.

  Method 2.
  a. If the problem persists, I recommend allows you to optimize the internet explore.
  See the article below for steps optimize internet explore. Also check if you can access these webistes in mode without modules if you have Internet Explorer 7 or above.
  http://support.Microsoft.com/kb/936213
   
  b. If nothing works to solve the issue try reset Internet Explorer.
  How reset internet Explorer?
  http://support.Microsoft.com/kb/923737
  IE reset warning:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  I hope this helps.