Captivate 5 Does not record the title of the project update
The following problem appears to be true for all projects that are based on a template, but I'll give you just one example:
I have a template that already has a value entered into the 'Title' field of the dialog box post. (The value is Model Quiz).
When I create a new project based on the template, and then open the dialog box post, the title of the project is first 'Quiz Template. I then change the title to that which is suitable for the actual project and publish and save and close the project. However, next time I reopen the project to publish it, the title returned to Model of Quiz.
Is there a way to Captivate store the title of the update, so I do not remember to correct every time me republish the project?
The important part of the trick is that you have to save under a different name in a different folder, and then publish your project with the new title.
Then you can register under the name of the original file in the original folder (overwrite the original file) and your title should stay as you want.
Save as in the same folder that the original does not usually change.
Tags: Adobe Captivate
Similar Questions
-
Tecra M5 does not record the date and time - battery RTC or CMOS checksum is inconsistent
My Tecra M5 PTM50E reverend new does not record the date and time. I loaded RTC battery for 8 hours when electricity is on in the said user's manual. I don't know where is the problem. The BIOS settings are respect after power is on.
When I change any value in the BIOS, the changes are saved properly but date & time system restored to their value 01/01/2000, 00:00 every time when I get out of turning off more of 2-3 min. Message "RTC battery is low or CMOS checksum is inconsistent.
Press [F1] to set Date/time"does not appear when I power on the computer. Any suggestions?
Hi guys
Usually this problem appears only if the CMOS (real time clock) battery is empty or corrupted.
The real time clock battery powers the internal clock in real time and calendar. It also maintains the system configuration. If the RTC battery is completely discharged, the system loses these data and the real-time clock. In this case, the message RTC battery is low or CMOS checksum is inconsistent appears.So I see only two possibilities:
Either you will charge the battery for real-time clock, or you ask the technician for replacement.Generally, the battery must be completely charged after 8-9 hoers but try to connect the laptop to the power adapter for a long time.
If it will not help solve the problem if you contact the ASP for the RTC battery replacement. -
my Apple Watch does not record the data of my activity on my iPhone. The application of the activity is implemented on my watch and twinned with phone and not yet to record data.
HI - try the following steps:
On your iPhone close application of activity and also, if it runs in the background, the health app (you can close open apps, including the app shows):
-Double-click the Home button, and then drag upward on each of the app previews to close.
It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:
-To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;
-To switch on: press and hold the side button until you see the Apple logo.
If this does not resolve the problem, try next disconnect and rematching of your watch:
-L'app shows on your iPhone shows backups automatically, including a new when the unpairing via the application.
-Choose to restore the watch (backup restore) when provided the opportunity during the whole.
-Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
-
Application module does not record the client interface
Hello.
The problem is that the application module does not record the client interface that is automatically generated classes.
Whenever I go to the module of the application and add them, they will be gone next time I open the workspace. Is this a known bug or is there something that I am missing?
I use jdev 11g relsease 2 version 11.1.2.3.0.
Please help, because I can't get anything done.
TIAPossible cases:
-There is something wrong with the method you created.
-The return type does not match -
Bridge does not record the adjustments in camera raw when I press on the fact
Bridge does not record the adjustments in camera raw when I press on the fact
It was because I installed a new program. Uninstalled and it works fine now!
-
Windows XP does not install the automatic updates.
Original title: kopieerfout
After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:
"
ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying
Kan het bestand niet naar doelmap copying.
Everything works OK.
Thanks for your help
Everything works OK.
It seems that it is not... Why Dutch? You use or have the corresponding language version installed?
Free translation of message:
"An error occurred during the copy of the file ntoskrnl.exe
Cannot copy file to destination... »Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.
Try to load your "last known good configuration".
The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed. Install manually if it is not.
If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747
Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265
If still no luck, you may need to restore the file ntoskrnl. exe as follows:
1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.
2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.
3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.
4 - Select the operating system you want to set and enter the administrator password.
5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32
6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.
7 - type exit to restart the computer.
Hope this helps - good luck!
-
I just installed 9 Captivate on my Mac, and it does not recognize the double click of the mouse to enter text in a title area. Subtitle text works, but the text is not title. I work in a reactive mode.
Hi rayhoskins,
We have not encountered such a problem. Can you please clear Captivate preferences and try again. .
Captivate preferences can be erased by double-clicking the following file: Applications\Adobe Captivaate 9\utils\ClearPreferencesMac
If you still face the issue please provide the Machine config?
-Derrick
Captivate the engineering team
-
I checked the save my email address box, but it does not record
original title: can not enter hotmail sign to save my e-mail addressHello
As the issue is specifically related to Windows Live Hotmail, I suggest that you post the question on the link provided below for assistance.
Hotmail Portal
-
Windows Media Center does not record the calendar.
Planning to record a program, but sometimes lapsed time up to the point where it does not record. I am running Windows 7 Home. Yes, I checked preferences but which differs only up to 15 minutes max. I have reinstalled twice already. Why please?
Hello
(1) did you make any changes before the show?
(2) what is the brand and model of the computer?
Windows Media Center records the first home run HD programs or any which TV tuner installed. However, you may need to follow a few rules.
-If you turn off your computer, Windows Media Center does not have a regular program. The computer must be turned on or "standby mode" to record a television show. The computer will not automatically in standby mode if Windows Media Center is open.
-Make sure that you turn off the screen and lower or turn off the sound if you have one at the request of a record in the middle of the night and don't want to be disturbed.-Your scheduled recording may not save in the following situation: schedule you a recording in Windows Media Center to start in less than ten minutes, close Windows Media Center and put your computer into standby or hibernation mode immediately. Use or one of the following options to save your record programmed:
a. do not close Windows Media Center before you put your computer on standby or hibernation.
b. after having programmed a recording, wait a minute before you put the computer in standby or hibernation.I would have you refer to the article below:
Why my TV did not show record in Windows Media Center?
http://Windows.Microsoft.com/en-in/Windows7/why-didn
Please let us know if that helps.
-
OpenScript does not record the session
Hi gems... good afternoon...
I am doing a test for our application of load basis. All related services oats are up. Version of OATS is 12.1.0.1
In configuring Oracle Application Testing in database > Oracle load testing, the schema is 'base default BTA' in the same server of the main schema (of which the application is directed).
The openscript I tried to record the actions to load tests, but it does not record anything.
My navigations are:
Start > all programs > Oracle application testing suite > File > New > Load Testing (Protocol Automation) > Web/HTTP > Default Repositiory > (given name) > finish
Then I start recording, open browser window, I hit our connected URL and performed an offline action and stop recording.
But nothing got recorded.
However, openscript for the functional test script generation / regression registers the actions properly.
Is this a bug or is it my mistake... Thanks in advance.Hello
Try to provide complete domain name ie. MachineName.domain:8080.
And make sure that there is no redirection to localhost. As I said all that with localhost in the URL is NOT registered.
Concerning
Wayne.
-
RoboForm 7.9.1.1 office does not record the password in 24 FF
RoboForm works on FF 24, but it does not save the password on some sites like Twitter.com
I tried [SHIFT-ENTER] or [ALT] & Login after you type the user name and password, but no luck.
Anyone has the same bug or me?
Thank you
The problem is solved after update to Roboform 7.9.2
-
LLA exercise fitness ring does not workout time. Is there a solution?
Hello
Progress towards your daily goal of exercise of credit, the application of the activity is to identify the activity equal or exceed the intensity of a brisk walk.
This applies both in general everyday wear and during the recording of training through the app to training sessions. It is possible that your training did not meet this requirement.
The definition of a brisk walk varies from one person to another and depends on your personal information. To verify that your personal information is accurate - and update over time:
-On your iPhone, in the application of Eve, go to: My Watch tab > health > edit - tap and adjust the settings, then press on in fact.
In general everyday wear and when your iPhone is not taken along on some workouts outdoors, the application of the activity relies on your movement of arm (measured by accelerometer) to track the movement in order to progress towards the goal of the exercise of accounting. For best results, let the arm on which you wear your watch to swing naturally when you move and during training.
Calibrate your watch can improve the precision of the estimates (including the appropriations for the year) made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below.
More information:
Calibrate your Apple Watch for better accuracy of training and activity - Apple Support
-
OpenScripts not loadable in BTA, OFT does not record the activity forms
I think of something borked here. I've got BTA 9.00.1355 running and it fits very well with the tests created by OFT - I can see them in the list of tests, game hide. Problem is, the scripts of the OFT do not seem to save whatever it is in the form of Java (and there is a bug in crash villain with LOV entries in self-service applications).
So today, I downloaded OpenScript (Version: 9.0.0.0 Service Release 1) Oracle and of course, it works very well and reread my activity of forms for me. But the scripts do not appear in the OFT or BTA and I need to load test based on the activity of the forms.
What gives?Hi Mike
Let me try and clarify this point, first OFT does not support forms and is replaced by OpenScript, OFT is still supported, but is considered the development and it will be deprecated in the near future, if you need to use the forms, you must use OpenScript. OpenScript is divided into modules for the functional test and test, functional works on a level of interface user and charge at a protocol level making the load scripts very scalable scripts registered through the functional test module will not show under OLT because they can not be used for load tests if you need to load load test the forms to record scripts using the module which can be selected load test script using the wizard again.
Hope this helps
Alex
-
LifeLog does not record the amount off sleep I saw by night
I want to track my sleep patterns, but my smart band or the journal of life is the recording of sleep at all! It was in the beginning, if anyone can help!
Hi Jay76, welcome to the community!
Try these steps and check after each method, if it worked:
- Log in to the app new Lifelog
- Make sure you wear the SmartBand on your dominant wrist
- Make sure that you have an active internet connection to ensure the successful synchronization of data between the application SmartBand and Lifelog
- Make sure you have not used the SmartBand in salt water or leave the USB microphone comes into contact with salt water
- Go to settings > Apps > all > Lifelog > press clear data (this may remove recorded activities)
Let us know whether or not these measures have helped. I hope they have!
-
I have controls Pro does not receive the volume update on the evolution of the patch
Hello
An I-controls Pro connected USB sending volume updated MainStage; but does not not not the volume update on the evolution of the patch
What is the tric?
I have a screen midday traffic, MainStage send nothing
Thanks in advance
Best
Cyril
P.S. I have controls Pro receive volume update logic in mode 'Logic control '.
Hello
Depending on how you have all put in place, it should simply be a case of select controls in Layout Mode and choosing the correct MIDI port in the box "Send value to ' in screen control inspector
TDC
Maybe you are looking for
-
queue, a dynamic container type
Hello I have several threads running, each waiting for an input queue (queue names are numbered by threads: "Queue0", "Queue1",...) and expects a type of individual container as an entry in the queue. I have variables for all these containers, also n
-
HP-15: DVD recovery Windows 8.1 for the upgrade?
My son-in-law of Costco, just bought a HP-15 laptop. It came loaded with Windows 7 Professional, but also provided with Windows 8.1 System Recovery DVD (1-3) and instructions on how to install Windows 8.x. I understand that a recovery disk will wipe
-
New HP computer has never worked
I bought a new HP Pavilion p7qe 26/05/2012. He never starts. The recovery did not work either. I needed a BONE to make it work, so I tried a distro Linux Ubuntu OpenSource.I had no problem with Ubuntu, my computer, but I never got an answer from HP a
-
Vista has conflicts and no current update on my laptop and the mouse keyboard, so it is erratically. Since an upgrade of Vista has been added to my laptop, it has been in place. The cursor seems to have a mind of its own and I can't change the mouse
-
I hate the way Windows Explorer works in Windows 7. I do not want my files to be included more than once i. e. in different libraries.