New HP computer has never worked
I bought a new HP Pavilion p7qe 26/05/2012. He never starts. The recovery did not work either. I needed a BONE to make it work, so I tried a distro Linux Ubuntu OpenSource.
I had no problem with Ubuntu, my computer, but I never got an answer from HP about it does not work since the beginning...
Oh, the Ubuntu distro that I use is Kubuntu 12.04 LTS... it's awesome... !!
Thanks Jaco... HP contacted me and they are looking after me, no charge...
Tags: HP Desktops
Similar Questions
-
'New function tab' has stopped working
The 'new tab' function has stopped working. When I click on the sign '+', nothing opens. When I right click on the Firefox tab in the bottom task bar, I used to get one of the menu options that says 'new tab or new window?', but now I have only 3 options: "Mozilla Firefox; Pin this program to the taskbar; Close this window ". How to re-install the tab' options '?
Hello
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Thank you.
-
Just realized that my girls that B320 was supposed to with touch screen. It has never been there since day 1, but we assumed, that he was not part of the particular model, we bought. I reinstalled the drivers, nothing works.
Any other person with this problem never managed to get their work and how?
Hi Nedmundo,
I checked the information that you send via PM and you have the following LCD module:
LCD - AUO M215HW03 V1
This does not indicate that it has a function touch that's why the touch screen has never worked. If you specifically ordered a model of touchscreen for your daughter, I recommend that you see the front desk to see if you have the correct unit (it should be here if your device is touch capable or not).
Hope this helps
-
My computer has never gone disk Windows defragment what should I do?
My computer has never gone disk Windows defragment what should I do? I have a HP Pavillion P631 with Windows 7
Hello
If you get this problem, use the HP Support Assistant utility, try the following
Firstly, uninstall your current version of HP Support Assistant by opening windows control panel, open programs and features, make the entry for HP Support Assistant right click and select uninstall. Once this process is complete, restart the PC.
Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.
http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html
After installation, restart the PC.
Kind regards
DP - K
-
my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570. I have also a box gray volume that keeps popping up on my screen. It is grey with a yellow speaker and a red volume bar that says 0. I tried everything on the forums as a clean boot and the registry editor. Any ideas?
I recommend you:
Go to a command prompt:
Start, all programs, accessories, command prompt.
Right click on command prompt and select "Run as Administrator" http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token > and run sfc/scannow http://support.microsoft.com/kb/929833>
Type exit (to close the elevated command prompt window)
Reset
See if that solves the problem.
If not, run the update http://support.microsoft.com/kb/947821system tool >
02:42:25 amUTC 23/08/11
-
The MS Virtual WiFi Miniport Adapter on my new laptop computer has an error code 31.
The MS Virtual WiFi Miniport Adapter on my new laptop computer has an error code 31. I tried to update the driver but no change. Driver date: 21/06/2006, driver Version: 6.1.7600.16385. Also get errors BOUNCING 'blue screen '. The Virtual wifi miniport adapter error would be a factor? My laptop is old 3 days and the only programs I have installed MS Office 2007 & Norton Antivirus Internet
I've heard rumors as if it were a set of chips intel, they have just released new drivers last week.
It's two days old, I think that return to the store and get another would be in order...
Latest Intel drivers:
32-bit - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18211&ProdId=3062&lang=eng
64-bit - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=18212&ProdId=3062&lang=engHelp others by letting us know if something solves your problem. Click useful Vote for those who help.
-
My new records button has stopped working. How can I fix it? Win 7
I run Windows 7 and my new records button has stopped working. How can I solve this problem
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
-
Webcam CNF7051 toshiba laptop; I installed windows 7 and webcam has never worked since.
I installed windows 7 and webcam has never worked since. What is the solution for this problem?
Hello
Since you upgraded to Windows 7 have you run Upgrade Advisor and verify with the
Compatibility Center (for the compatibility of the device)?Windows 7 Upgrade Advisor <-- please="" run="" this="">--> http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx
Also check the Compatibility Center (for the compatibility of the device)?
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspxCheck with the system and peripheral manufacturers for updated drivers and many have special
instructions to help the upgrade to Windows 7. You should also check with the system
Machine to ask in their forums (if any) for known problems and solutions and support.Toshiba - Forums
http://laptopforums.Toshiba.com/Toshiba - Contacts
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactToshiba - drivers - access your model
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba - Support
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp==============================================================
If the system is compatible Windows 7 AND there are drivers for your WebCam
(and other devices).
Vista references apply to Windows 7.
There is for Windows 7.Login as an administrator.
Control Panel - Device Manager - Imaging - write down of the brand and the model of camera - double
Click on it and on the tab of the driver is version. Now, click on update drivers (who cannot do anything
that MS is far behind the drivers of certification). The RIGHT CLICK on the camera - UNINSTALL-
REBOOT - it will refresh the driver stack.Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
the camera software (if not more recent get the same).Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.
Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (updated drivers manually using the methods above is)
to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html==============================================================
If there are no Windows 7 drivers:
You can try loading the latest driver available in Compatibility Mode which sometimes
work however, it isn't anywhere near a sure thing.Exhausted all other methods in the Troubleshoot utility above before trying these.
Logon as ADMINISTRATOR for all of them.
You can try Compatibility Mode but this rarely works on the device drivers.
Right click on the driver executable (.exe) file - select Compatibility Mode
In the drop-down menu choose XP or Vista and Service Pack (if it is the version
"you try the drivers).Click OK, and then let the race to see if it will install.
=================================================
It also rarely works on the device drivers but it is worth trying:
Another method to try is to run the .exe (if self extraction) or Unzip (if it is compressed) to a folder:
How to open a high in Windows 7 command prompt
http://www.SevenForums.com/tutorials/783-elevated-command-prompt.htmlOpen an elevated command prompt : (probably looks like this)
C:\Windows\System32 >
CD \the path to this folder as C:\User\Your user Name\Camera_Folder or something else
the path is the folder where the driver is unpacked.So in this case it would be \User\Your User Name\Camera_Folder CD and the prompt
look like:CD \User\Your user Name\Camera_Folder >
This in type at the prompt and press ENTER.
-I - one *.inf PnPUtil
It will take a little time to respond.
If it does not (error) use the full path to the driver, for example (which can be used
any guest):PnPUtil-i - one C:\User\Your user Name\Camera_Folder\*.inf
Still wait to see if it will install.
How to open a high in Windows 7 command prompt
http://www.SevenForums.com/tutorials/783-elevated-command-prompt.htmlThe PnPUtil command syntax
http://msdn.Microsoft.com/en-us/library/ff550423 (vs.85) .aspxPnPUtil.exe - operating instructions
https://www.faultwire.com/file_detail/PnPUtil.exe * 28200.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Photoshop has never worked.
I tried photoimerge and that has not worked. He worked years ago. Can do things in any other photo editor. I have had this for a year and they wouldn't let me cancle. I have never yet a thing. Bridge has worked pretty good. nothing else worked on the bad.
Hi again,
- HDR and Photomerge both include several scripts folder scripts stack. It looks like at least one of these scripts are missing on your system. Which could due to a non-standard installation or HD. You may need to reinstall Photoshop.
- In addition, you can install Photoshop CC 2015.
Concerning
Rohit
-
HP deskjet 1050 j410 paper jam icon flashes still printer is new and has never worked
help with hpdeskjet 1050
all ideas
-
That came with the laptop program I never used it until now.
Hello
Check with the system manufacturer's support, their documentation online and ask for their
Forums (if any) for known issues.=====================================
If supported these could help.
Hardware devices not detected or does not work - a Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsThe problems with Bluetooth devices
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devicesSet up a Bluetooth compatible device
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-deviceThe problems with Bluetooth devices
http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspxHow to set up a Bluetooth connection
http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connectionThe Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
as expected when you click on the element - for Windows 7 this check manually
http://support.Microsoft.com/kb/960531/en-usIf you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.
BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
devices around you. For each detected Bluetooth device, it displays the following information:
The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
Last detection time and more. BluetoothView can also warn when a new Bluetooth device
is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
http://www.NirSoft.NET/utils/bluetooth_viewer.htmlBluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
the standard output. For each Bluetooth device, the following information is displayed: MAC
Address, name, Major Device Type, minor device Type and possibly the name of the company of
the device (if the external file of MAC addresses - oui.txt is provided) - FREE
http://www.NirSoft.NET/utils/bluetoothcl.html---------------------------------------------------------------------
Add a Bluetooth device to your computer
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computerAdd a Bluetooth device or other wireless or network device: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions---------------------------------------------------------------------
More information of possible interest to some:
What is a Bluetooth personal area network (PAN) network?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-PanConnect to a Bluetooth personal area network (PAN) network
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-PanI hope this helps.
-
HP Pavilion: Before port USB on HP desktop computer has stopped working
My HP desktop computer is about 2 years old and has two USB ports on the front and a number on the back. I had no problem with any of the ports until I used a USB in the port now broken and caused a power outage that now this port doesn't recognize any USB device. It says "USB device not recognized. The last USB device you connected to this computer worked badly and Windows does not recognize. »
I tried to uninstall and reinstall the USB ports on the Device Manager and have lived all the suggestions on the HP support site and the Microsoft support site. The defective USB key must have caused damage to the track. I hope you can suggest something that I can do to get it working again.
Hello
The only port on the front is damaged. The USB key must have damaged only this USB port. I'd like to reuse this memory bar.
You need to replace the USB module, two ports USB 3.0 of housing as the two front ports use the same module and connections to the motherboard.
You will probably need to go to HP for the part.
You should be able to get access to the component by removing the front bezel. Remove the side panel also. You should see the connection of the cable and add him the USB 3.0 connector front on the motherboard.
Jay
-
new faucet botton has stopped working after a few updates
Hi, FireFox has had a few updates for IDM modules as usual, but after he (new tap botton) stopped working, even the new tap since the right-click option does not work, please help
Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.
There are a few places to check for the Ask toolbar:
- Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
- Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons
-
Buttons Satellite L500 - 22R Fn has never worked
My phone has buttons Fn but I can´t use it since I bought it a year ago.
I was trying to install and uninstall Flash Cards and value package several times, using Ccleaner also but it worked haven´t.
I can only use functions fn with my mouse, picking on the top of my screen, but in this way certain functions (wifi, mouse) are not available.
Another idea?
Your help is more than welcome!Hello
This is strange!
Have you tried the Toshiba Recovery?Should do this and you should try test the FN keys using the factory settings which you will get after the recovery procedure has been finished
You could start the HARD drive recovery by pressing F8 after cell has been powered, choose fix my computer-> drive HARD recovery
But in General if the utility VAP and Flash memory card Support is installed, the FN buttons should functions
Maps Flash must be enabled and rebooted in all programs Toshiba-> Flash Cards
-
Can someone tell me how to get touch 3D to work on the iphone 6 s? He has never worked?
Tactile 3D is on, but it does not work even on the sensitivity test. It is not set to zoom, or any zoom setting is toggled on. I don't have a cover on her screen. I have reset hard. I am at a loss to know how to operate it.
Hello
The following steps may help:
- If you don't have yet does, first to update your iPhone to the latest version of the software (test and then again before you continue):
- Back up your iPhone via iTunes (you can choose the option to encrypt the backup) and/or via iCloud:
- Restore your iPhone via iTunes (install a new copy of iOS) settings:
- Test if 3D Touch works before restoring your backup:
If the problem persists when your iPhone is restored to factory settings, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your iPhone checked under warranty:
Maybe you are looking for
-
AirPlay icon not showing or missing
Hello I use Macbook Pro 2016 OS X iPhong 6s iOS 9.3.4 and 10.11.6. I can't see the icon airplay on my devices. I have read a lot about this issue and tried to do but no change. Please advise me. Thank you. Nana
-
Hope some can help you with this - have reset my Apple ID, but can't access iTunes. He still has my old ID attached and I can't get around it. Very irritating, perhaps I'm missing a step, but its put me in a circle of reset, I do and I still can't g
-
several modules in enet cDAQ reading problem
I have an enet cDAQ 9188 with 8 modules, including two 9213 modules CT and two 9215 ana in modules, reading a tc and an ana in each of the two screws. try different combinations of the order processed in the vis, all three modules will read ok, but n
-
Read specific channels of an existing PDM file
Dear users of Lab View, I would like to ask for help using the PDM read Vi to read specific channels in existing TDMS files. I know to use the "contents of list TDMS" vi to that group names and channel list, but I don't know how then use this inform
-
I can barely see the pale blue. I wonder if I can change it to a darker color. Thank you!!