Windows XP does not install the automatic updates.
Original title: kopieerfout
After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:
"
ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying
Kan het bestand niet naar doelmap copying.
Everything works OK.
Thanks for your help
Everything works OK.
It seems that it is not... Why Dutch? You use or have the corresponding language version installed?
Free translation of message:
"An error occurred during the copy of the file ntoskrnl.exe
Cannot copy file to destination... »
Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.
Try to load your "last known good configuration".
The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed. Install manually if it is not.
If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747
Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265
If still no luck, you may need to restore the file ntoskrnl. exe as follows:
1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.
2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.
3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.
4 - Select the operating system you want to set and enter the administrator password.
5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32
6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.
7 - type exit to restart the computer.
Hope this helps - good luck!
Tags: Windows
Similar Questions
-
Comments Windows 7 does not install the network driver?
Hello.
I downloaded latest Win7 RC and installed on a virtual machine in VMware workstation. It not installed the virtual NIC driver so I have no internet!
I googled the problem and it turns out that some people have reported this problem, and it came with a solution which in turn off the virtual machine, remove the network adapter, turn on the virtual machine, turn off again, to add a new and finally turn on the virtual machine - as described in this forum:
I did and I've also updated vmware workstation (I have version 6.5.2 build 156735) and updated tools vmware on windows 7 and nothing worked. I have an another vm with XP and everything goes smoothly with networking and fully operational internet. I used the win7 help and he pointed out this particular problem: there is no device installed network driver? Any suggestions?
Each virtual machine can be started by double-clicking its vmx file.
It is a plain text file. You can open it in every good text editor. Do not use scamblers text such as WORD and nonsense.
You can compare the vmx file with the list of material that you give to the man behind the counter to your computer-friendly dealer store.
You can add line at the end of this file - make sure you just you have twice the same line
___________________________________
Description of the vmx settings: http://sanbarrow.com/vmx.html
VMware-liveCD: http://sanbarrow.com/moa.html
-
does not install the new update for iTunes for windows 7 (64-bit)
I have windows 7 on a 64-bit computer. I have installed, uninstalled and reinstalled iTunes more and more and more nothing helps. I get the same message every time... The Apple Mobile Device service does not start and displays error 1053 and an error 7 (windows 193). Windows has been updated. I worked on it for 2 days! So frustrating! Ready to give up on Apple and Windows all together. I also fixed the registry, did a clean boot, and yet, I'm having a problem... Help!
Hi all
After uninstalling and cleaning everything about Apple, I installed this version (Special?):
http://support.Apple.com/kb/DL1784?viewlocale=en_US&locale=en_US
And it works on my Win 7 HP 64 - bit!
Good luck!
-
Do not install the automatic updates Windows XP, download error 0 x 80246008
Have failed several times - have bits set @ auto - confident to rectify, not lack of computer knowledge and seems almost impossible to get thru to Microsoft - who are looking for an easy solution / single or coordinated for Microsoft - T.I.A
Got error is 0 x 80246008
Security Update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2604111) Saturday 16 June 2012 Automatic updates Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656369) Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2604092) Security Update for Microsoft .NET Framework 3.5 SP1 on Windows XP, Server 2003, Vista, Server 2008 x 86 (KB2657424) Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656352) Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2656407) Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2686828) Update of security suites for Microsoft Office 2007 (KB2596880) Update for the filter of junk e-mail in Outlook 2007 (KB2687267) Update of security for Microsoft Office Excel 2007 (KB2597161) Since you mentioned what to do a "Windows Installer are not available" message, try some of the suggestions in this thread to see if it moves things along:
-
Windows store does not download the app updates
I can't get the APP store to work and I'm also not able to get my PC to download the updates that it must, it's been 2 months that updates have been downloaded. And why have we not physically go to settings to get the downloads? Should not the PC do what he's done before and just automatically download? I have my computer set up to do and it still don't do it at all. I am also thinking maybe someday a MAC book.
Lynn
Hi Lynn,
Thanks for posting your question on the Microsoft community.
I would like to know some information about the problem so that we can help you better.
1. what happens when you open the Windows store? You receive an error message or code?
2. you made any hardware or software changes on your computer before the show?Thank you for details on the issue.
This problem may occur due to corrupted Windows store files or parameters.
I would suggest trying the following methods and check if it helps.
Method 1:
Run Troubleshooter app and check.
See this link:
http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcabIf you continue to have problems with a soft, or if you are unable to open the Windows store, you can use 'App store'. This tool can automatically identify and fix problems with applications and Windows store.
If this does not help, use method 2.
Method 2:
Please use the suggestions contained in this Microsoft support article and check the issue.
Reference:
Why I can't update in the store?
http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-storeSee also:
Why can't find or install the application on the Windows Store?
http://Windows.Microsoft.com/en-us/Windows-8/why-find-install-app-Windows-storeI hope this information helps.
Please let us know if you need more help.
Thank you
-
I have several MSU files that I downloaded on my computer.
I click on them and the stand-alone windows installer goes into "searching for updates on this computer".
2 hours later, still nothing.
I know that people have problems with the update of win 7... Nothing works.
So far is just sitting there looking for updates... He ran all night... Nothing... always to research.
I can not find where Microsoft puts the installed update files... If the software distribution folder, which wiped out during one of my attempts to resolve this problem.
windows update told me today there were new updates available, and then sit there for 6 hours trying to get them with no result...
So if I can't even manually install MSU file, what can I do? Try to install the kb3102810 fix
You can use internet explore and access the catalog M$ and bring the two,.
That is to say a right click and run as administrator
Then go to the catalog and the top search right for each update and allows them to basket
-
rpet cannot install Service Pack 4 (KB2463332)
It's not for XP. That's why. There is no SP4 for XP. Sound for SQL Server 2005
-
original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem
my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem
Hi Glennisidore,
Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.
-
Original title: Signature Collision?
I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.
Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision
Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).
I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.
Can anyone help?
Thank you
Comatose13Hello Comatose13,
There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.
http://support.Microsoft.com/kb/330140
Bobby
-
My computer will not install the last update of security mpam-fex64 [1] .exe. I have
Windows 7 home premium, X 64 based PC. Does anyone have any suggestions? Windows gives me the message that the update failed. I get the error 66 has code.Hello sajanclt,
It is an update of the Forefront client. I suggest you post in the following Forefront Client Forum.
http://social.technet.Microsoft.com/forums/en-us/category/forefrontThey will be better able to help you.
Thank you
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Install Windows 8 does not recognize the system drive
I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.
Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.
The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.
I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.
Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.
This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.
Thank you in advance for any assistance.
Windows 8 Pro 64-bit (full version) - OEM
Intel Core i5 - 3570K
Card mother GIGABYTE GA-Z77X-UD5H
Crucial Ballistix 2 x 8 GB DDR3 1600
Crucial M4 2.5 "128 GB SSD (system disk)
WD Green WD30EZRX x 4 (data readers) 3 TB drive
Rosewill Challenger-U3 ATX Mid Tower Case
SeaSonic M12II 620W 620 Bronze PSU
ASUS DVD writerThe DSS must be LOW LEVEL FORMATE.
Once, there may be no other [HDDs] not connected to the SATA ports.
Install Windows 8 Pro now.
[Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.
-
Windows Messaging does not mask the images in emails after installing ie9
I have Windows Mail to block images in my emails, but that after the installation Internet Explorer9 windows mail does not block the images in my emails even if the parameters are always the same. I had to uninstall ie9 for this reason, except that ie9 seems to work. Vista Home Premium SP2.
Stringy salvation,
Try to upgrade to windows live mail 2011 and check if it works with IE9.
Maybe just the problem of the software with Windows mail. -
Windows 8 does not see the hard drive on the Satellite A200
Windows 8 does not see the hard drive on the A200.
How to install it?S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
The HARD drive is visible in the BIOS?Do you use the original disc from Microsoft of Windows 8?
-
Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s
Hello
I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.
Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.
Hello
The CD/DVD drive needs no special drivers!
Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)Simply said, the Vista should recognize the drive without any problems.
A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?
There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
It of necessary to update the registry entry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}1. click on the start menu.
2. If it is a Vista machine in the search box type regedit without quotes.
3. look for the registry key mentioned above.
4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
5. restart Windows.
6 let me know if it works. -
Can not install the kb2481109 update, see log attached
Can not install the kb2481109 update, see below
1.328: 11:36:42.796 24/08/2013 (local)
1.328: c:\161c59ea6306a628592717476ee96b\update\update.exe (version 6.3.13.0)
1,344: hotfix started with following command line:
1,344: in function GetReleaseSet, line 1240, RegQueryValueEx failed with error 0x2
1515: C:\WINXP\system32\mstscax.dll is present
1515: condition succeeded to the Presence.RDCInstallBlock.Section section in row 1 prerequisites
1515: FileVersion C:\WINXP\system32\mstscax.dll is less than 6.0.6001.0
1515: condition in Test.RDCInstallBlock.Section failed with the fist
1515: Check condition for line 2 of prerequisite returned FALSE
1515: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
1,515: KB2481109 Setup has encountered an error: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
1,562: ReadStringFromInf: UpdSpGetLineText failed: 0xe0000102
1,562: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
38.890: message displayed to the user: Setup cannot continue because one or more prerequisites required to install KB2481109 failed. For more details, check the c:\winxp\KB2481109.log log file
38.890: user input: OK
38.890: Update.exe extended error code = 0xf0f4
38.890: Update.exe return code was masked to 0 x 643 for MSI custom action compliance.Hi Keith,
I would have you look at the article-
http://support.Microsoft.com/kb/958051#top
http://support.Microsoft.com/kb/883824
http://support.Microsoft.com/kb/822798#top
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/
Make sure that you back up the data on the computer before you continue.
Thank you.
Maybe you are looking for
-
Display the flaws admitted to the HP warranty
Hello, where can I find documentation on HP display defects policy for commercial displays (acceptable number of bad pixels etc.)? Thank you.
-
I put a password on my laptop last night that I thought must have been correct, but somewhere I think I made a mistake and now can't log in to my laptop. I forgot to do a reset disk - silly me! - and I believe that this is the administrator account a
-
Hello. In my application, I have a classic report where, in a region, I built a toolbar with three Popup LOVs which interact with the report. Each LOV displays different items and returns the value according to the selected item.For example:Popup LOV
-
I have these sample data: set linesize 500 with tbl_data AS (SELECT '1234567 JAMES BOND MI5 Spy 01-MAY-14 31-MAY-14 543.21' str FROM DUAL) SELECT str , REGEXP_SUBSTR(str, '[0-9]+') AS emp_no , REGEXP_SUBSTR(str,'\ ([^ ]*)\ ', 1,1,null,1) fi
-
Bonjoru,How to remove acrobat reader to my PC I have an error that prevents me drive G is invalid?Kind regards