Captivate 5, exe: go to another project

Similar Questions

• Captivate 5 opening of another project - link is incorrect

  I have a Captivate 5 project that uses a "main project" to open various 'under' projects.  I have published all projects such as exe (I also tried editing swf and htm to see if the problem is specific to the .exe but I have this problem with both methods), all projects are accessed using a click box, which, if successful, will open another project.  All my sub projects opens correctly except one.  When you click on this project, it shows an error that displays the path to the .htm file only?  I find it weird because I tried only editing like .exe, is therefore to associate without file .htm (or I do not understand how it works?).  Here's the funny part, the path to the nonexistent .htm file is missing a return back as you can see below.

  

  I tried to recreate the click box, but it does not work.  I copied another box of click of work who open a different project.  The click box works until I have change the project that it points to and then I get the same error.

  Another thing, when I go to link the project from the drop-down list displays several projects with the same name.

  

  even if I have only one instance of the project in my folder by default.  I tried to empty the cache to see if that get rid of duplicates, but it did not work.  I also installed captivate on another computer, copied over my project files, deleted the click box and recreated and received the same error message.  He pointed to the new location on the new computer, but lacked a "------" makes the link not valid.

  I published my computers not assigned as swf and htm project and copied to the location specified in the error, but it does not work.

  Any ideas?  I ran out of things to try.

  Thank you

  Tika

  Captivate the default behavior is to set up an absolute connection to the target file, not a relative link, which is what you will need to be if ever you want to migrate your content to another location, for example a web server.

  If you can see that the URL is incorrect, change it. You must manually edit the link that Captivate automatically creates for you and it becomes a relative link that points to the target HTM file.

  If you don't know how to build links, do some googling on the subject.  It's something everyone who works with web content needs to know how to do.

• Go to a slide in another project

  I saw a discussion on the jump to a slide in another project.  More specifically, the negotiations post following on how to achieve that in Captivate 4, using Javascript.

  http://forums.Adobe.com/message/4029197

  I use 6 Captivate and the code provided for CP4 does not work for me.  Are there updates on how you can make this CP6?

  Yes, that's what I was looking for! Thanks again.  And indeed, it works like SWF but not as the packaged EXE.  I'll take a look at the AIR and see what I can do with it!

• Save a skin to be reused in another project

  When I save an appearance in a project, it always appears in the list of appearances, as well as those that come with Captivate. However, when I create another project or open a previously created project, recorded skin is not in the list. How to import a custom look of one project to another?

  You must ensure that your themes files is saved in the same location where all the other Captivate themes are.

  With Cp7, this location is

  C:\Users\Public\Documents\Adobe\eLearning Assets\Layouts\7_0\en_US

• Captivate 6 fail to export the project captions and subtitles

  Hello.

  I am using Captivate 6.1.0.319 on Windows 7.

  I have audio on my slides and captioning is selected on each slide, but when I export (file > > export > > project captions and subtitles), none of the text closed captioning is in the Word document.

  Most of the legends project appear, but not all of them.

  I've already renamed my preferences to OLD file to force the preferences to refresh.

  Any other suggestions?

  Thank you

  Tichelle

  Never mind.

  This seems to be a problem with corruption of files.

  The I'm working today with a particular file was initially created in Captivate 4.

  I opened another project that I created charges last month, and he has no problem with the export of legends; It works exactly as expected.

  I tried to copy all the slides in the projects that don't export, then paste them into a new project, but that did not help the issue-exporter.

  Tichelle

• How can I associate with a certain scene in another project?

  Hello

  I would like to make an addition, emit a tip action to a button that links to a scene in another project.

  as an example:

  On the last stage of the project B, I want to put a link back to project a scene 3. This is where the initial selection to open the project B was performed.

  I would be very grateful for your help!

  Thanks in advance,

  Stephanie

  You're used to plot? This is because you use the word 'scene '.

  Take a look at Jim Leichliter article: http://captivatedev.com/2013/11/21/jump-specific-slide-course-using-captivate-7/

  lILYBIRI

• Link to another project

  Hello!

  I am a beginner of Captivate. I'm trying to make a link to another project by a button. I chose:

  If the user clicks the button:

  Success - open another project

  Project - (project name)

  When I try to project to test, I get the following message: "the project (project name) .htm, .swf (project name) is launched at this stage but is not available for the overview."

  What I am doing wrong? Thank you very much for your help!

  Hello

  You do not have something wrong. You test in a preview. The message tells you that you will need to publish it to see it in action.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Garland - open another project

  Captivate 2, I have three daisy chained and uploaded to a LMS System project files. When the 1 read file end I call file 2 (via open another project), and Ditto for the 3 file when file 2 finishes. I have a pre-loader screen in table 2 and table 3 but too much time going on before the following project file starts playing causing an awkward delay. Is it possible to set up the project "called" next to start file to play while continuing to charge without having to wait until it is completely downloaded? Thanks for any help you can provide.
  
  Ken Metcalf

  Hi Ken,

  To my knowledge, you cannot distribute a project, so what I have done in the past for different LMS' is really, really small files. To link to them, I chose an interaction that is part of the lesson - if there are the following buttons, or if the learner is supposed to click on part of the screen — and set it to open the next file. It will be a bit long to do because it was not part of your original design, but it can be worth the effort.

  Good luck!

  ERR229

• Call another project

  I call another project in a project. It works very well, but what I want to do is call the second project, launch it and then when he finally continue with the original project, to the point where I called the other. I.e. play screens 1-5, gives the opportunity to execute the second project, if the user is running, then come back to the original starting screen 6.
  
  I don't see an option for what to do at the end of the second project to do (stop project, project of loop etc.). Or can it be done? Thank you.

  Hi bobelmore

  One thing you might be able to do is to launch the second project in a new instance of the browser. Your username would then close the browser, how they would return to the film, they were all first. The original film would not continue until they are back and clicked a button. To do this, insert a click box or a button that would call the second project. Notice that to the right of where you specify the project is an arrow down. Click and you can select 'New' to open it in a new window. Click a second time and you can deselect "Continue to play the project" (or "continue reading film' If you use Captivate 1)

  Hope this helps a bit... Rick

• Edit causes the break while another project ' charge. Why?

  Hello

  Why is - it, when I make a change to a project, often a drop-down list indicates another project is loading and there is an irritating, sometimes extended, break while this project 'charges '?

  It is often an earlier version of the latest project, duplicated.

  I guess there is no way to avoid it.

  The best

  Elmer

  It is a question that indicates a lack of powerful hardware to make all this treatment at the time, in general.  What are you training/machine card?

• Is there an easier way to spend some of my diagrams, graphs and the etc. of my project to another project?

  I have a project with many diagrams, graphics, Structures of the MA, user folders and etc. Is it possible next to copy and paste to move the items to another project?

  Hello

  Looks like you are trying to import all or part of a larger project into another project.  In the AWRDE V10, AWR introduced "Import Project", a tool that allows you to do exactly this.  To use the import project go to file > Import Project > and follow the instructions.

  

  If you are using a version prior to V10, then the copy/paste method is probably the most effective.

  Support of the AWR

• With the help of characters in another project to animate cc?

  I have a project with a symbol and I want to use that symbol in another project. I tried to use adobe cc library by dragging the symbol in the library of adobe cc library, and it does not work. I tried to look for how to save symbols flash in the form of files, and that no longer works. Help!

  Thank you

  You can't redraw anything.  Simply copy and paste into the new file.

• Record of control of projects and costs are not visible when the project is created manually or copy model or another project

  
  Hi all

  If I create the project using business process 'Request for project' and when we opened the project, we can see "Project delivery" and "Cost control" mode records.

  But when I create project directly in the workspace of society (Admin mode) > company sponsored Shell > project, either by directly or copy model or another project.

  We are not able to see above two folders in user mode.

  I had checked to access control, there are access avalible for all project users to the two folder in user mode.

  Help, please.

  The project administrator mode.

  Implement > BPs

  Add in your Bps and enable and configure workflow settings.

  Glad that the other worked ok now.

  I hope this helps.

• How to import another project MUSE in a project to open the site as I can first?

  I created MUSE sites I want to merge with another site that I created. First I can import a project into another project and merge the projects in this way.  I can do this Muse?

  Thank you

  You can do that in Muse. However that said that you can have two sites of Muse open at the same time and copy the content on. Another option is to simply create your pages library items in a site and then in your second site just drag the library items.

• How to import the class from another project in Jdeveloper 11.1.1.7

  I have an application with many projects. I create new project with the application and I want to import a class from another project with demand.

  But I am getting error ( found import.somePackge.someClass). I have red that I need to add it to the path of bulid project but no idea how.

  I use Jdeveloper 11.1.1.7

  Click the project--> project properties, dependencies, click here to change the Righ pencil icon and check the build output