Captivate 5 opening of another project - link is incorrect

Similar Questions

• Receives the following message when you try to open a project, "Captivate cannot open the fol.

  Receives the following message when you try to open a project, "Captivate cannot open the next project.  Ensure that the project is not already open... There is enough disk space... "All the critiria are put... still can't open the file.  Please help in the recovery of this project.

  Suggestions here:

  http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/recover-corrupt-project

• Open the other project - relative path

  I hate to keep asking this question... but someone came up with a viable solution for the opening of another project in Captivate 4 using a relative path? I see this discussion start and stop at various locations... but it never seems to be an answer that works. I don't quite understand why Adobe has taken this feature of this version... like he did the almost useless product for me. I need to be able to relate a project to another somehow, and I don't know the absolute path is going to be when I create the training.

  I don't know where else to turn for help on this. Anyone?

  Thank you.

  Margin

  Hello

  There are many factors at play here.

  Are you sure that Flash security is not hinder you?

  Click here for help with security setting

  See you soon... Rick

  Click here for authorized Adobe Captivate and RoboHelp HTML training Click here for the SorcerStone Blog Click here for RoboHelp and Captivate eBooks

• Link to another project

  Hello!

  I am a beginner of Captivate. I'm trying to make a link to another project by a button. I chose:

  If the user clicks the button:

  Success - open another project

  Project - (project name)

  When I try to project to test, I get the following message: "the project (project name) .htm, .swf (project name) is launched at this stage but is not available for the overview."

  What I am doing wrong? Thank you very much for your help!

  Hello

  You do not have something wrong. You test in a preview. The message tells you that you will need to publish it to see it in action.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Garland - open another project

  Captivate 2, I have three daisy chained and uploaded to a LMS System project files. When the 1 read file end I call file 2 (via open another project), and Ditto for the 3 file when file 2 finishes. I have a pre-loader screen in table 2 and table 3 but too much time going on before the following project file starts playing causing an awkward delay. Is it possible to set up the project "called" next to start file to play while continuing to charge without having to wait until it is completely downloaded? Thanks for any help you can provide.
  
  Ken Metcalf

  Hi Ken,

  To my knowledge, you cannot distribute a project, so what I have done in the past for different LMS' is really, really small files. To link to them, I chose an interaction that is part of the lesson - if there are the following buttons, or if the learner is supposed to click on part of the screen — and set it to open the next file. It will be a bit long to do because it was not part of your original design, but it can be worth the effort.

  Good luck!

  ERR229

• Open a different project - how to prevent to open another window

  I broke a great captivate in six separate projects project, published under the title of EXEs. My menu system, when I run another project he opens another window and the other and so on...

  Obviously New, Parent, current, Top options only work with HTML...

  Is there a way to open a second project exe in the same window as the parent?

  Thank you

  Jack

  Captivate 7

  You're right that you can only call another project published in the same window is running in a browser.

  Exe open like automatic execution of players who play only one thing, not as browsers that can be used to navigate to a different content and read it.  So the 'window' as such is not something you can call other projects in.

• How to stop the clicked links open in another tab in use?

  Using Firefox 25.0 on XP SP3.
  When multiple tabs are open by clicking a link in the direct current tab will often open the requested page (link) in another (non-living) current tab instead of the direct current tab or a new tab, which is not acceptable

  Thanks for all the answers.
  Very gratifying to know there are helpful people interested.
  I have my middle button set to "Back" so that it is not an easy option.
  Now THAT CTRL-click in effect force a new tab to open it, but it is a bit of a pain.
  I tried Safe Mode and behavior continued.
  Completely uninstalled and reinstalled Firefox and the behavior continued.
  So far I have had replicated my movements outside to visit various (not always the same) web sites.
  I had been using search engine Findamo as it seemed to be on the start page of Firefox and I had not seen before.
  I'm new to Firefox as Windows Internet Explorer becomes increasingly useless that XP cannot perform an iteration later than V.8
  The next time I haven't used Findamo and went back to Google - strange behavior disappeared!
  Heckling. Statements of mental health.
  Thanks for all your help.

• How to import another project MUSE in a project to open the site as I can first?

  I created MUSE sites I want to merge with another site that I created. First I can import a project into another project and merge the projects in this way.  I can do this Muse?

  Thank you

  You can do that in Muse. However that said that you can have two sites of Muse open at the same time and copy the content on. Another option is to simply create your pages library items in a site and then in your second site just drag the library items.

• Click on the box - opening another project once again, once again, once again...

  Hello

  I think I'm a fool. I read almoust all the 'open another project', «affair...» "the discussions etc. But I have no idea how make it work. Count once more:

  I've unlocked security Flash or anything. I have a project and it is so big, so I decided to cut off for smaller projects. I wish I had a project on a slide with many areas of clickboxes for the opening of other projects.

  I exported, published the possibilities of project (swf, CP. hml...) related to the one slide project folder. I tried to open another project, open the file/URL. Nothing happens.

  What I need to do, step by step.

  
  Where should be all projects, which is shaped, where preview

  I hope that you understand everything.

  was soon Barbatian

  Hello

  It will be a long process.

  You can share your Contact information on [email protected]

  If its possible I'll call you back

  Thank you

  Vikram

• Captivate 5, exe: go to another project

  I know that there are action points that allow you to navigate from one project to another project.  But it is possible to navigate to a specific slide in another project?

  Hi swm28,

  Currently, Adobe Captivate does not offer this solution.

  If you really want this feature in future versions of Adobe Captivate, please send us a feature request.

  -nsukumar

• Link to a topic in another project

  Hello.

  I m new in RoboHelp.

  I Don t know how to make a link between one of my projects and a topic in another (in RoboHelp 8).

  I think that in RoboHelp 7 is 'hyperlink' - 'hyperlink subject remote', but in RoboHelp 8 "remote topic" - function isn´t it.

  (Sorry for my bad English)

  Janine

  Hi Janine and welcome in the HR community.

  How you link to a section of another HR project depends on what kind of output you produce (CHM, WebHelp, etc.). The remote subject method you mention is used only when you are linking to a CHM to another project file output. What is more, the option is available only if you have the Microsoft HTML Help source unique layout defined as the default output. The binding in RH8 method is exactly the same as in RH7. If you always produce CHMS, check your layout of single source pod which is the default output. If Microsoft HTML Help is not the default, right-click on it and click on "Set as default output".

  Either way, your English is very good except that 'project' is spelled with a 'c' ;-)

• Links that open in another Page

  I try to open my links in another page, so that my site remains open.  I guess it is something very simple, but I can't understand how do.

  Thanks a bunch!

  Dave

  In the tab of the Inspector, the target must be set to

  _blank

  I hope this helps.

  Carol

  Subject: Links that open in another Page

  I try to have my links opening in another page, to keep my site

  Open. I guess it is something very simple, but I can't figure out how

  to do.

• How can I associate with a certain scene in another project?

  Hello

  I would like to make an addition, emit a tip action to a button that links to a scene in another project.

  as an example:

  On the last stage of the project B, I want to put a link back to project a scene 3. This is where the initial selection to open the project B was performed.

  I would be very grateful for your help!

  Thanks in advance,

  Stephanie

  You're used to plot? This is because you use the word 'scene '.

  Take a look at Jim Leichliter article: http://captivatedev.com/2013/11/21/jump-specific-slide-course-using-captivate-7/

  lILYBIRI

• FilePath to "open the other projects.

  I have a button that has "Open other Project", which opens the 2nd project very well for me.  But Captivate 4 lists the full path of the file and won't let me not specify filename only.  The two projects are in the same place, but listing means full filepath that nobody else can open the 2nd project.

  I heard that Captivate 4 lets not use relative paths to 'open another project' for some reason any.

  Have you tried to publish .swf and link using 'open a URL or file?

  This is how to create a link to the top of all my projects, but I am still using Captivate 3.

• In Win 7 I get an error for various leave and- or "this action cannot be completed because the folder or the file is open in another program."

  I'm money than Win 7 Home Premium 64-bit SP1. The following information are linked to the steps to solve a persistent problem. Please read carefully and answer completely, since you asked users to report carefully on the long process of troubleshooting-advice you provided. I've been at it for six hours now in this round of troubleshooting.

  I tried to solve the continued permission errors and- or "this action cannot be completed because the folder or the file is open in another program."  This happens when attempts to cut-copy-paste------delete files (including the specific details listed below).  I searched on the Microsoft Support site to find answers to solve the problem, including the thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  In accordance with this notice of sons, I emptied my Temp folder. The problem persisted. I downloaded the app 'Take Ownership' and also tried with periodic and sporadic success. It seemed to lengthen the time between recurrences of the problem - that it would allow me a half a dozen of all cutting------copy-paste and------or remove actions, until the error messages stop me to exercise that or any other action.  Then, I used the task Mgr end explorer.exe and reopen it to see if that makes a difference. For a while it worked, where I could make a few cut sporadically------copy-paste and------or delete actions. Today I'm at the point where I can preform one action, then I have to open task Mgr, end explorer.exe and then restart it to perform again a more cut-copy-paste or delete action. So, I have to return to the task Mgr and repeat the process above, for each new action I want to perform.

  I watched rained down in the above quoted thread, and followed Support Engineer Samhrutha G troubleshooting tips - method 4 - start the computer start-up in minimal mode and to use the diagnostic selective startup. In previous discussions, you have asked for advice as to what you were doing when the problem occurs, so I rated as below:

  I went into msconfig, unchecked "Load Startup items", went to the tab Serivce and allowed only half of them. He was 12 of 24 listed entries. During the tests, programs that are only open on my desk were two windows explore and Notepad to save the results. I got the following results:

  I moved the contents of a folder on my main C drive on my external drive of 3 TB. When I then tried to remove this folder on my external hard drive I got the message

  "You must be authorized to perform this action."

  You need authorization S-1-5-21-602162358-602609370-839522115-1004 to make changes to this file.

  After I clicked retry the record has been deleted. When I went to delete another folder in the same location on my external hard drive, he deleted the first time. He was then three other orders normally external hard disk.

  Then I tried to delete a file in a different location on the external hard drive and the message

  "You need give permission to delete this folder.

  When I clicked on continue what he deleted

  I cut and pasted a file from my external hard drive to my C drive. The record stuck on drive C. He pasted the folder on drive C, but the original folder remained on the external hard drive, even though it was a cut and paste. So when I went to delete the original folder that should have been cut, this message came:

  "You need permission to delete this folder.

  When I clicked on continue he grew up:

  ", You need permission to perform this action."

  You need authorization MYCOMPUTERNAME\MYCOMPUTERNAME to make changes to this file.

  When I clicked Try Again he deleted. But why he would leave the original behind if it was a cut and paste?

  After that, I tried to cut and paste a file to a location on the external external hard drive to another location on the hard drive, after I had seen the contents of that folder and went up a level to the folder parent to try the cut and paste. I received the following message:

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  When I clicked Try Again it just repeat the error message, don't not allowing me to carry out the action and any other further reduction-copy paste and- or delete actions. I had not opened or closed all other folders, windows or applications, during the above test.

  Based on the Support Engineer Samhrutha G troubleshooting tips 4 method found on the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/in-Windows-7-getting-error-the-action-cant-be/449b2e05-8ED0-4A72-98bd-dde430d27e10?TM=1356626412321

  (same thread as cited previously) Then I went into msconfig > Services and reduced the number of items in the selective startup of a unit, as I started 11 - instead of 12 - 24 listed entries. Upon reboot, I decided to re - check msconfig. In msconfig > Services he showed 165 points. All had a check in the box next to them. These 165 points, 56 showed as "ongoing" the rest showed as stopped. It would be useful that I specifically what were these 56 entries?

  I continued with the troubleshooting test based on these settings initiated by Support Engineer Samhrutha G tips to reduce the selective startup (remember... it was 11 selected items)

  I started by I try to copy / paste a file from my external hard drive to my C drive. He has successfully completed. When I went back to the location of the original file on the hard disk external and clicked on undo move, the message came:

  "You need give the administrator permission to move this folder.

  When I clicked on continue as he moved the folder

  Then I tried to cut a file on the C drive and stick it in my external hard drive. He successfully completed the task. I then went back to the original location of the file on the C drive and tried to "Undo Move". I received the following message:

  "You need give the administrator permission to move this folder.

  By clicking on continue he grew up

  "You must be authorized to perform this action."

  By clicking on try again, just to repeat the error message and could not undo the move

  I tried to cut the entire contents of a folder on my C drive and stick it in a directory on my external hard drive. He was able to make the cut and paste but left a folder and two files back in the original location on my C drive. When I then went to cut the 3 elements he missed and move them to the location I had initially indicated on my external hard drive - for the first file he brought up in the dialogue that he was already stuck and I would like to merge, etc, that I clicked on none. the second file in the sequence that he grew up:

  "You must be authorized to perform this action."

  When I clicked on continue he grew up

  "You must be authorized to perform this action."

  You need permission from the administrator of the computer to make changes to this file.

  When I clicked on Try Again, he said.

  "Cannot find this article.

  It is no longer in C:\Projects\FolderName. Check the location of the item, and then try again.

  When I clicked Try Again he repeats just this same error message until I had to click Cancel to exit.

  The record was then only showed only two remaining elements. Because the first cut and paste involved 22 files and 3 folders, now I am unable to say which of them got ignored or lost. When I updated the location of the original files he showed that a single folder on the left and the content was empty. When I checked it now duplicated and pasted to the location of this folder on the external drive, he was there with the appropriate content. So he had left this file to the original location, but it was empty. Why this erratic behavior?

  When I went, then, remove this folder remaining from the original location, he deleted successfully. If you understand the above message, you notice that a file has disappeared.

  I now need to mention an incident b4 I started the process of solving problems today. I felt that you needed some context b4 I mention this. I had tried to cut a folder that contains 33 files and 6 records. The six files contained two subfolders whose combined total content contained 28 photos - a mixture of mp4, JPEG and mp3 - for a total of 61 files in the parent folder, I tried to cut and paste. I tried to paste the folder parent on my external hard drive. He started at the cut and paste normally 7.04 GB and towards the end, I got the message

  "Cannot perform this action because the folder or the file is open in another program

  Close the folder or file, and then try again.

  He was unable to finish when I clicked on Try Again, and I had to cancel out. However, he had removed all but one of the folders containing three files and it was not pasted into the new location. They were gone. I did a search on Win for some of the names of known files in this folder, and none appeared. Fortunately I had them on a second external drive. I plugged it to restore files, and of course that means more open task Mgr, ending explorer.exe and reopen in order to restore the files that explore had lost.

  After my results displayed above two rounds of by using a clean boot and selective startup, you can see that it is very difficult to actually diagnose the problem because it happens inconsistently. It is also very time consuming and very, very, very, very, very frustrating.

  I decided to try the method of disabling "just" thumb caching in the registry according to the advice of Robert P in the thread quotes. He said that I should go to Start > Run > gpedit.msc and "disable implementing caching thumbnails in hidden thumbs.db files" that was published of course in OK Win 7 > files, folders, and storage of the Microsoft Community forum. So I typed gpedit.msc in the search bar, and there was no instance of gpedit.msc, only setup.exe, I had to take was to gpedit.msc.  I installed it and after installation I typed again and he has not yet posted. So I rebooted. Restarted it showed up. When I went to run gpedit.msc, he brought to the top of the window with the error message group policy "MMC could not create the snap" when I looked up this article in the Microsoft Community, I found the link to the Win 7 forum, where the Star NIthyananda reported community
  "Gpedit.msc is not available in Windows 7 Home premium.  Discussion here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/when-i-open-gpeditmsc-on-my-computer-which-is/b1576a0f-348a-49D8-be70-d83d0f36e8aa?tab=AllReplies#tabs

  He then mentioned

  "If you want to disable caching of thumbnails, you can access the registry editor and go to changing the location according to the value [note: its mine incorrect grammatical syntax and not]".

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache ".

  with no information on how actually access HKEY_CURRENT_USER

  I found the appropriate information on how to access the registry in Win 7 running regedit, with information on how to navigate to the appropriate location in the registry to disable the thumbnail cache

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\DisableThumbnailCache

  but there is no entry "DisableThumbnailCache.

  I researched and found that you can add it in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  I downloaded the Disable_Thumbnail_Cache.reg file. After running Disable_Thumbnail_Cache.reg to merge it into the registry, I then returned to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\

  and yet, there was no entry on DisableThumbnailCache

  The second method mentioned in

  http://www.SevenForums.com/tutorials/10794-thumbnail-cache-enable-disable.html

  has been to access via the Group Policy Editor

  I searched for the Group Policy Editor in Windows 7 search bar and it showed three entries

  A folder titled "for Windows 7 Group Policy Editor.

  a zip file named "add_gpedit_msc_by_jwils876_d3kh6vm.zip".

  Setup.exe

  The "Group policy for Windows 7 Editor" folder contained just the same two files listed below it

  So, I went ahead and ran the setup.exe and then restarted. After the reboot, I did a new search for the Group Policy Editor and he grew up just three results.

  I went back on the WindowsSeven Forum and found advice in the thread

  http://www.SevenForums.com/tutorials/3652-local-Group-Policy-Editor-open.html

  Title: how to open the local Group Policy Editor in Windows 7

  The tips were:

  To search for a group policy or the registry key, value, etc., see:

  Political research group

  The link above leads to:

  "The GPS is going to move to a new end area January!

  http://gpsearch.azurewebsites.NET
  You will be redirected in 15 seconds! »

  I waited about 3 minutes and it went nowhere, so I clicked on the http link and he grew up:

  GetCategoryDependencies() - 500ServerError

  This is where I could and I am now. And I can't "simply" disable caching of thumbnails. Can I return to my workspace and all simply continue with the editing work that I do, which is to cut, or -copy-paste and or delete files that I advance in my workflow. I can't do it without opening task and then Bishop ending and re-open explorer.exe for each order, I want to achieve.

  At this point now a few hours later including writing this message, I think that a new facility would be easier, more rapid and less headaches but that will solve the problem?

  Sense my frustration?  If this is not the case, let me make it clear. It's extremely frustrating. Why Windows doesn't have a fix for this is an error permanently?

  It was mentioned in the original thread that I cited that it would be better to start a new thread and continue to add my comment to the answers already posted 138. This problem has plagued me for months. Please notify

  As you have tried many fixes and changes to the registry, I suspect that your only option is a clean installation

  And having done so don't try not to cut/copy anything other than the data in the files in libraries in any other player. Copy of records of the victory Road will result in the registry locations becoming screwed.

  And if you really need locate the lbraries on another drive will redirect the location of other libraries that animate