Captivate 8 blue exclamation point under slides in Filmstrip mode

Similar Questions

• Minor problem with the New Installation of Windows 7 on my Inspiron E1705/9400 - two entries for "Base system device" under "Other devices" with yellow exclamation point

  Hello

  First of all, let me tell you about my system.   It is of a laptop Inspiron E1705/9400 with the Core 2 Duo T7400 processor clocked at 2.16 GHZ.   It has 2 GB of RAM and a hard drive on the Hitachi Travelstar nine 500 GB (7200 RPM).   It also has the GeForce Go 7900 GS video card.    Previously, it had Windows XP Professional (32 bit) and worked well.   But, I have three computers in my home and Home Office and would they work better together on my wired home network, so I'm upgrading all three to Windows 7.   My two desktops (a Dimension XPS 420 and the other Dimension XPS 430) seem like they will be no problem to upgrade to Windows 7.   But, this laptop was not on the list of Dell Windows 7 compatibility.   However, the Windows 7 Upgrade Advisor that I have downloaded and run seemed to say that it was OK to do a clean install of Windows 7 32-bit and he had only a few minor issues, where it says search the drivers updated from the manufacturer.   Initially, the laptop came with a 100 GB hard drive.   For my use, which becomes very small, so I decided to get the exact same 7200 RPM drive 500 GB size.   This will allow me to do a clean install of the 32 bit Windows 7 OS on the new hard drive and not have to wipe the old disk to do so.   I can just keep the old HD and paste it back whenever I need to get something out of it.

  So, here's my minor problem.   After the transfer of some elements off the coast of the old hard drive, I installed the new 500 GB drive and installed a cleaning of the 32-bit version of Windows 7.    I'm happy to announce that I have not had virtually no problems with installation and everything seems to work fine.   He seems a little more zippy than before and I have not met so far that doesn't seem to work.   I went through most of features and almost everything is superb.   But there is a minor problem, showing in Device Manager.   At least, I think it's a minor problem, but maybe someone can give me feedback to know if she is or not.

  In the Device Manager list, there is a category called "other devices" now and the icon shows a little white circle with an exclamation mark.    When you expand this category, you see two identical entries that say "Base system device" and the icon has a yellow circle with an exclamation mark inside.     I know from experience that it is not a good thing to see items in the device manager that have a yellow circle with an exclamation point.   I clicked on both of them and neither one really tells you what the device is, or who did what is site you would go to a driver.    On the general tab, it has the following information:

  -Device type Other devices

  Reference of the manufacturer- Unknown

                       Location     -         Bus PCI 3, device 1, function 3

  
  

  Under device status, it says the following:

                         The drivers for this device are not installed. (Code 28)

  There is no driver selected for the item or a set of device information

  To find a driver for this device, click Update driver.

  Each of the entries seem to be almost the same thing... but not exactly.   The other has the location

  list PCI Bus 3, device 1, function 2... instead of function 1.   This seems to be the only difference.

  I tried the button to update the driver, but that doesn't seem to work.   No matter if you say it looks like your

  computer or to look for a new driver from the internet, it does not find anything.     As I said at the beginning,

  the system seems to work very well... but, given that I don't know what this device is or does, I might be missing something.

  He drives me crazy just have these yellow circles with exclamation point hanging out in my device manager.

  I could really use some help here.    Any ideas or help would be greatly appreciated.

  Thank you

  Bryan Ray (Richmond, WILL)

  BTW, I just downloaded and installed the driver pack from this ftp location and it worked, even for Windows 8.1 - 64 bit.

  Thanks Steve!

  Roger

• Satellite Pro A300-22F - WLAN is listed with a yellow exclamation point

  I just bought an A300-22nd.
  WIFI does not work - in Device Manager the conroller of network (under 'other devices') has an excalamation mark on it - the problem is not installed driver.

  Laptop came with a sheet of additive of toshiba on problems with wireless connectivity - which goes through how to install the driver. Two problems - the leaflet is reserved to L300 L300D and copying is of such poor quality that I can't read the instructions!

  I know that this phone has WLAN (a, d, g and draft n), and it has a switch for him - what is on and lights up.

  At the moment I am connected to the router broadband - not much use as my PC is at the front desk even - I need a wireless connectivity!

  Help!

  Hello!

  On the Toshiba site, you can download all the drivers for your laptop and so he should t be a problem to solve this yellow exclamation point:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Download the driver the most recent and that s it! :)

  In addition, WLAN connectivity can be enabled using the hardware on the laptop switch * and * if you press FN + F8.

  Good bye

• Satellite Pro A110 - in BIOS exclamation Point in front of the HARD drive

  Satellite A110 Pro PSAB1C-GM80XE

  Question is this. SATA CONTROLLER TOAST the laptop?

  Story.

  It seems as if the laptop hard drive has failed.
  Prior to the laptop, it would get BSOD.
  It would, however, go back to windows XP.

  After that, sometimes it wouldn't restart, he would try to boot from lan as if there is no hard drives.
  I check the bios.

  There is a! in front of the model of the drive. I can't change it, reset default does not change.
  No update of the bios was already made.
  Page drivers laptop says I have to install the update to the bios from windows xp... I can't do it of course.

  I bought a new hard drive for the laptop. WD Scorpio Blue (pretty standard) 160Gig

  The laptop recognize model to drive hard in the bios, but once again with the exclamation point in front of the name of the template.

  BIOS can see, but nothing else. No windows CD is able to watch the HD.

  Once again, it is the sata controller or can someone point me to an update of the bios I can do with a USB key.
  Should I just throw the laptop in the trash? I expect to give it a new life with a new hard drive and own bones.

  Hello

  What is the BSOD STOP Code?

  If 0x0000007B, it means that Windows cannot find a SATA driver for the SATA controller. To solve this BSOD, set the SATA Mode in the BIOS in "COMPATIBILITY" mode, or use a USB floppy with the SATA driver on this subject during the installation of Windows. Press F6 when you are prompted to install a 3rd party storage driver.

  Or otherwise, to use the original Toshiba Recovery disk to install Windows.

  I do not mean the exclamation point in the BIOS that the HARD drive is faulty, it means that the HARD drive has the highest priority boot on my laptop.

• Why a red exclamation point has just appeared on all my files?

  All the icons of file on my computer without apparent reason, view the red exclamation points. I can't find the details in the menu right/properties click to explain it. They seem all to open normally. The operating system seems to be running a little slower and temperament than normal. Any ideas?

  McAfee Internet Security and McAfee Total Protection have a feature called McAfee online backup. It is a limited version of the McAfee product separate online backup. It is actually a renamed Mozy. http://home.McAfee.com/store/PackageDetail.aspx?pkgid=348

  It is on the main menu under the backup and Data Protection. I know that there is a way to turn on and off here. It seems, however, that it may be necessary to uninstall the McAfee product and then create a custom installation by omitting the backup feature online.

  https://community.McAfee.com/thread/23256?start=0&TSTART=0

  The seventh post on this thread is rather convoluted instructions to disable. It is fairly old so maybe things have changed.

  If you have problems, the best thing would be to contact McAfee technical support.

• In devices and printers, I have an icon for a laptop with a yellow exclamation point. I have a desktop computer and remove this icon of the laptop.

  A laptop once was connected to my desktop via USB cable PC; It belonged to me.  The owner wants to access its database of the company, but in vain.

  Now, in devices and printers, I have a laptop icon that is not one of my devices, but the Device Manager lists in "Other devices" with a (USB) universal serial bus controller, which is also included in the icon of the computer laptop properties under the material.  The yellow exclamation point is for troubleshooting.  The problem is: I do not own a laptop device.

  I want to remove the icon of the laptop and its inscriptions, including the (USB) universal serial bus controller.  Both are marked by a yellow exclamation point, but, of course, they do not work because they do not exist.  But this icon of the laptop has name my PC on it.

  My desktop PC should not be listed in devices and printers, does it?

  Hello.

  Open devices and printers right click on the device - remove the instrument.

• The mouse launch point for slide in the wrong place, can not be moved?

  Hello world

  I'm back in Captivate after some time away and I thought that it was possible to move the starting point of a mouse, but can't seem to do it.

  I use 7 Captivate. The sequence of the slide is crossing the scroll bar, scroll down, then come back to the left to click on a link. For some reason any on this third slide, the path of the mouse starts up in the upper left corner. I guess it's possible, that there was a foreign slide between the roller and the slide of problem I deleted what is causing the problem, I do not remember.

  If I move the 3rd slide the rim, I can use the "align to previous slide' for her to start where it should, but I can't stay there, when I step back, and if I try this alignment after the slide of scroll, he puts it in the upper left corner even.

  I searched the Web and saw a mention of the abduction of a cache, so I did, but it did not help. I looked through the forum messages and doesn't seem all that has been useful in this regard.

  Any ideas or suggestions?

  Thank you!

  Since the second slide (scrolling) is animated (full movement), there is no layer of real mice, right?

  So the third slide is not a starting point.

  Try...

  'Mouse show' on this second slide and place it at the end of the timeline to a very short length, it seems very quickly where the full-motion-ends-up mouse.

  If this does not work, take a still shot of the last image of the slide of the query and make a new slide 3, 'See the mouse' and the mouse should stick to the position that you place (i.e. above the place where the mouse has ended on the previous slide in the query).

• Some files reader with an exclamation mark under the icon.

  Some Player files have icons looking weird with either an exclamation of a check mark under the icon.  When right click on these I get a message that the Explorer is resrting and then it does.  What is the problem with these files?  I am trying to include some but couldn't because esplrer restarts when I try.

  Help, please.

  These red exclamation point icons are certainly not part of windows. Here's what I found.

  These icons of red circle with a white exclamation point are called "icons of status" and are found in the following products. The following Web sites show the status of red exclamation point icons with a description of how they are used.

  Antivirus Symantec System Center (also other Symantec products)
  http://Service1.Symantec.com/support/ent-security.nsf/docid/2001031510414248

  Mozy online backup.
  http://Mozy.force.com/support/mozyKnowledgeWidget?docid=78225

  Some McAfee products also use the software online that shows these status icons, Mozy backup. There may be other products that also use these icons.

  If you use Mozy backup

  1. Right-click on the Mozy icon / in your system tray and select settings > more settings.
  2. Click on the Options pane, then the general tab.
  3. To remove icons, disable the backup status icons Show on option files, and then click OK.
  4. To add icons, check the backup status icons Show on option files, and then click OK.
  5. You may need to restart your computer for the changes to take effect.

  If the option to display the status of the backup on file icons is greyed out, click Change options that are currently not available in the lower right.

• 'Update of the current process' of the LR5 missing exclamation point?

  Can anyone tell my why my older images (in LR 5) isn't an exclamation point asking me if I want to update the current process?

  I was just reviewing some more older. JPG files that were imported initially with Lightroom 2 or 3.   In the Panel to the point the elders 'Recovery' and 'Fill light' settings are displayed, which alerted me to the fact that the process of the most recent is not used.  If I remember correctly, he used to be an exclamation in the corner of each photo alert me to it.

  I discovered that if I right click on the pictures at the bottom of the screen, I can select "Developing the parameters" / "Update in progress", , but I found the exclamation point to be more practical.  I hope that there is a way to get this feature.

  Thanks in advance for advice :-)

  The exclamation point was changed/moved in LR5. It is now a symbol "lightning/lightning" under the histogram in the develop Module. Hovering over the icon will tell you that the version of the process, click the icon will allow you to update.

  

• exclamation point

  ITunes 11000 lists all titles but more than 7000 have the exclamation point, which means that they went WHERE they are.

  My classic ipod died so I bought a new, came to download my music and cant. who or what has nicked all my songs?

  This does not necessarily mean they are gone, it means that iTunes can't find them where he thinks they are. Have you done something in your iTunes library lately? You can try to play a song or two and let iTunes to try to recover their locations. If it does not, a user of ASC here has a wide range of operating on iTunes and Windows tips. I would try to find one on the library pretending disappear, unless it comes here first.

  Here: empty/corrupted after upgrade/crash iTunes library

• Gusts: why some photos have a point under them?

  Gusts: why some photos have a point under them? Any information appreciated.

  Browsing through the thumbnails, you'll see a point grey below the pictures with the best focus and composition.

• How can I find the music marked with an exclamation point in my itunes library?

  How can I find the music marked with an exclamation point in my itunes library?

  Hello there rdgernnr!

  I certainly don't want to find the songs that show the "!" and get them to play correctly. If you have not yet done it, read this article: If you see an exclamation point next to your items in iTunes - Apple Support

  More precisely:

  Correct the path of the media file

  Follow these steps to help find the correct location of the file iTunes media:

  1. In iTunes on your Mac or PC, select the song, album, movie, or television show that has the exclamation next to him.
  2. In the MenuBar at the top of your screen, computer or at the top of the iTunes window choose Edition > read the information.
     If you are using Windows and you don't see the menu bar, Learn how to turn it on.
  3. When you see a message asking if you want to locate the file, click search.
     • If you know the location of the file, point to it iTunes and try to read your content.
     • If you do not know the location of the file, search for it:
       Mac: Press ⌘ and space control your keyboard, and then type the name of the movie title, app, song, album or artist.
       Windows: Press the Windows on your keyboard, and then type the name of the movie title, app, song, album or artist. If your keyboard does not have a Windows key, press the Escape (Esc) and control (Ctrl) on your keyboard.
     • If the file is on a network drive or external, plug on the volume of disk or external network.
     • If you find your objects in the trash or recycle bin, restore them to their previous location:
       Mac: Control-click or right-click on the item and choose put back.
       Windows: Right-click on the item and choose restore.
  4. Once you retrieve the file, use Get new Info to locate the file, and then point iTunes to the correct location.

  See you soon!

• Why is there a yellow triangle with a black exclamation point on my website address

  Hello

  Sometimes I have a yellow triangle with a black exclamation point on the address bar of my site Web www.blackboxinsurancereviews.com can someone tell me what this means and what I can about this please?

  Thank you

  Iain McaSween

  Hello, it will probably happen just when you visit https: //blackboxinsurancereviews.com/ instead of http://blackboxinsurancereviews.com/ given that the site is not configured to be served encrypted HTTPS...

• Exclamation dictation command returns 'exclamation point '?

  On my MacBookPro, dictation commands generally work very well, but the Point of Exclamation command does not work. It returns "exclamation point"when the documentation says it should return "!" Any thoughts on how to solve this anomaly?

  Many thanks - Tom

  By

  Orders of dictation, you can use OS x - Apple support , you use the command

  exclamation point

• Tecra M2: XP Device Manager shows 4 yellow exclamation points

  Hello

  I had too to recharge my laptop with XP and have 4 devices in the device with the yellow exclamation point Manager.

  Ethernet controller
  Network controller
  Unkown
  Multimedia audio controller.

  I have havetried to install drivers WITHOUT success.
  I have tried loads yet joy o,

  I'm missing something.
  Can someone help

  Hello

  I'll try to identify the devices without plug & play id, but I can't guarantee anything.
  If something is wrong please post the PnP - ID (Device Manager-> properties-> details-> ID devices material).

  Ethernet controller is Intel Pro/100 VE or Intel Pro 1000/MT (both have been integrating M2) network adapter
  http://support.toshiba-tro.de/Tools/updates/LAN/LAN-XP-8790.zip or http://support.toshiba-tro.de/tedd-files2/0/lan-20070912134727.zip

  Network controller is Intel Pro Wireless 2200 GB or 2100 (same as above, both were build most of the cases. Others like too Atheros and Cisco, but not so often)
  http://downloadmirror.Intel.com/13000/Eng/11.5.0.0_xDrivers.zip or http://downloadmirror.intel.com/11918/eng/Intel (R) PROWireless21_125836.zip

  Unknown device of infrared
  http://support.toshiba-tro.de/tools/Tecra/TM2/XP/IrDA-TM2-XP-5125000.zip

  Multimedia audio controller is the SoundMax
  http://support.toshiba-tro.de/tools/Tecra/TM2/XP/sound-TM2-XP-512015160.zip

  Please allow me two questions:
  Why don't you use the recovery media. It is much easier?
  Have you tried to install any driver Toshiba driver page? http://computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp