Captivate 8 - text captions appear on schedule "when I play chronology," but only the FIRST legend text appears in any ' Preview '.

Similar Questions

• When you set the outgoing SMTP server, why not specifying the SMTP server 'by' is not working, but only the first specified server?

  I have several options for the outgoing SMTP server. I put a default and attempt to send. It fails and uses the first condition in the list.

  I restart Thunderbird and try to send. It uses the first condition in the list.

  I eliminated all SMTP servers in the list but the one I want, and it works.

  What escapes me, that I have observed this problem on all my systems for a long time?

  Kind regards

  Carl

  your lack of anything that account having a SMTP server associated with them, which, if your 'in' an account more wrinkles 'default '.

  Right click on a folder in account, and then select settings.
  Click on the account name in the settings and on the right is a drop down list and the value 'default' smtp for this account.

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com

• When I sync my ipod touch with itunes only the first song is downloaded and then he sits for hours

  When I try to sync my ipod touch with iTunes, only the first song seems to be downloaded, then he just "hangs" for hours

  What happens if you try to synchronize not this first song and next song?

  What is listed n the block status of iTunes when it freezes?

• The APPStore in my IPhone6S is empty. There is no list (for example, entertainment, games, sports, etc.) It was available when I bought initially but now the app store is empty. That's happened?

  The Apple App store in my version 9 IPhone6S is empty. The list is available (e.g., sports, news, games, etc.) when I bought it, but now, the list disappeared. That's happened?

  You are connected to the internet? Try a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons.

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• When it start printing; It intercepts the first part of the paper then stop

  Hello
  I have HP LaserJet 1100
  When it start printing; It intercepts the first part of the paper then stop; so it does not print and the part of the document come in but not out
  So what is the name of the part should be replaced?
  Let me know soon
  Concerning

  Hello

  Thanks for the post.  With it, we can have several questions the cause.  Type/paper weight, not enough paper in the tray, rollers which don't sting power or the remains of a previous paper jam.  I've included a pasted below document that can help with this and help refine the root cause.  Good luck!

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=25470&prodTypeId=18972&prodSeriesId=25470&ObjectID=bpl05811

• When I click on play now only the first track plays

  I downloaded a few albums but when I click on play now only the first track is playing. Why is this? play the entire album?

  OP - music play all

  Hello Terence,

  Thanks for posting your query on the Microsoft Community.

  We understand the inconvenience caused and we will try our best to solve the problem.

  To help you better, I would like to know; are you clicking on play now on the individual song or the whole album?

  As a first step, I suggest you try to play the entire album and check if it helps.

  If the problem persists, perform audit and resolution of the problems of the app if it helps.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  For more information on the application of music, see the link below:

  http://Windows.Microsoft.com/en-us/Windows-8/music

  It can be useful, we meet with the status of your question. We will be happy to help you.

• When I try to start lightroom 6 it opens only the first window, but nothing more. ligthroom closed several times, restarted the computer, update system, nothing. What can I do?, when I try to start lightroom 6 it opens only the first.

  When I try to start lightroom 6 it opens only the first window, but nothing more. ligthroom closed several times, restarted the computer, update system, nothing. What can I do?, when I try to start lightroom 6 it opens only the first.

  Hi silvers.

  Please make sure that your graphics card and Lightroom 6 are up-to-date. Latest version of Lightroom is 6.4.

  Please check the FAQ and troubleshooting of Adobe Lightroom GPU and disable the use of the GPU in Lightroom.

  What is your operating system?

  Kind regards

  Assani

• Why when converting a TIFF file to PDF, only the first page is the conversion?

  Why, when you convert a tiff to pdf file, only the first page is the conversion?  Never had this problem before.

  Hi steves18035157,

  Problem has been reported as a bug. Our team of engineers working in priority to get this fixed number.

  Kind regards
  Nicos

• Hello, I bought Adobe Creative with new Adobe ID before that I have a trial version with a different Adobe ID facility. MIT purchased version ID does not appear to me, but only the ID old test I can't connect. Help, please. My English is not good come fro

  Hello

  I bought Adobe Creative with new Adobe ID before that I have a trial version with a different Adobe ID facility. MIT purchased version ID does not appear to me, but only the ID old test I can't connect.

  Help, please.

  My English is not good come from Germany

  Log, activation, or connection errors. CS5.5 and later versions

  Mylenium

• Subtitles do not appear when I play my video exported with first Pro CC

  So, I've spent some time cela, but can't seem to get anywhere.  I'm relatively new to Premiere Pro and I created a sequence with captioning.  I tried to export several different ways (Quicktime, H264, etc.).  I was also careful to include a subtitling sidecar file or to incorporate subtitles into the video when you export using Quicktime.  I was also sure that the two files (the film and the SCC file) are in the same place.  I tried different versions of the video exported using Quicktime Player and VLC, but had no chance to get the subtitles to appear.  In Quicktime player I've tried it with active captioning, but this does not seem to make a difference.  In VLC, I tried the Advanced Open option which allows you to select the subtitle file, that you want to load with the film.  Once again, no luck.  I tried to drag / drop the file *. CSC on the movie then it plays.  I tried to select a subtitle track using the drop down below the video.  Once again, no luck.  I tried exporting the file as a .mcc of Premiere Pro and that no longer works.  I even tried to convert the file *. CSC to .srt app file online.

  In any case, I'm stumped.  All I want to do is get my film to play with subtitles with a simple application.  Any help would be appreciated.  Thank you.

  S. @@

  Sorry, Fritz. It's been a while since I really look to the help page of captioning, and I just assumed that the workflow new legend is covered here. And a second apology because the State of this page is at least partly my fault insofar as I promised our technical editor months ago that I would expand this page.

  You don't do something wrong when it comes to set the start and end for legend blocks. In the timeline panel, legend titles are basically only display. The apparent handles are really just indicators; they are not interactive. I think it's our road map to make them interactive, but I have no idea wherever improvement is in the order of precedence.

  I'm not sure what you mean about "each caption track block [being] limited to a little more than 30 seconds. If there is a maximum of a clip of the legend, it is probably 12 or 24 hours. I have worked with many that are more than an hour. With respect to the individual legend within clip blocks, my memory has grown blurred in the months since I worked on the feature, but I think that the program does not impose a limit on the duration, you can give a block. However, there may be a limit on how long a given legend block will be actually are displayed. I thought the limit was 15 seconds, but I just did a test with blocks of 10, 20 and 40 seconds, and each of them had completely given duration in the encoded output. Maybe the limit that I think is a specific standard... Come Monday, I'll have to check with colleagues who remained close to all of the features.

  Note that if you add a caption element in a sequence until you have finished adding blocks, then you will need to cut the clip after increasing its duration by adding blocks.

  Finally, although the first creation of the legends from scratch media feature set was designed mainly to import captions created in a tool of creation of third party and, if necessary, revise the content and control the synchronization.

• After scrolling on a page, the text becomes illegible. When it is readable, but only until I scroll again. This only happens in Firefox. Any help?

  Almost any page, I have open in Firefox is readable when open but when I scroll upwards or downwards the text starts to break up and become unreadable. I can read the text if I highlights but if I scroll upwards or downwards it breaks again. I even had to highlight the instructions on the previous page that asked me about a password enough. This happens only in Firefox. IE is not a problem with the same page as Firefox. I changed monitors and still have the same problem. Given that this does not happen in IE I don't think I have a bad video card. I tried the 'Reset Firefox' thing but it did not help.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• sent letter drafts in hotmail, went back to send and only the first line of the text was visible, have been if the rest went, and how do I get that back

  typed a letter and drafts in hotmail, whent sent to retrieve to send and only got the first line of text back.

  Hotmail forums:

  http://www.windowslivehelp.com/forums.aspx?ProductID=1

  They will help you when repost you your question in the Forums above for Hotmail.

  See you soon

  Mick Murphy - Microsoft partner

• Windows7 64 bit. Why the desktop icons all be empty when you run Firefox nightly for the first time?

  Every time after I get a Firefox Nightly update and run it, it will display the next page:
  https://www.mozilla.org/en-US/firefox/nightly/firstrun/?oldversion=30.0 which is fine.
  But when it opens this page, all my desktop icons go clear/white and one by one, they all return with their correct icons. And all this happens in a few seconds.
  Why is the operation of Firefox every night for the first time, my desktop icons?

  I suspect that you have both nightly and Firefox version installed?

  "The Firefox 'about' shows 30.0. and I've now checked for updates and are now running 33.1.1"
  

  It's different from what you have first published here with!
  Firefox 33.1.1 represents the latest version - a 32-bit version.

  Whereas, the version you first posted here with was a generation of 64-bit channel every night from July. Every night is for "Alpha-testers" and is updated every day, where the name of "night".

  Everything that happens in the background on the Windows desktop should not be of concern right now, every night Win 64 bit is several months out.
  If you really want to test the Win 64 Nightly builds, follow and participate in the very different evenings and son of 'channels' on MozillaZine forum is based.