Captivate 8, why the back of sanitation to the quiz action take back me to the quiz when I want to just go to the next slide?

Similar Questions

• Tip jump slide on "go to the next slide" - action 6 Captivate

  I have perhaps not such a strong sense of what is obvious! I have set up a tip action:

  

  The action is validated from a click box determined by what the user enters the text entry area, any number between 1 and 5. The text entry box is assigned to a variable that is returned to the next slide. On release, however, the action assigned to the click box takes me to, not on the 'next' side - he really jumps the next slide and goes to the one after that it is supposed to go. To force a work around, I tried to assign the conditional action to ' slide ', but when I tried to do, I couldn't be Ahmed down.. to choose the slide. Here's what I got:

  

  So it did not scroll up to let me down to 155 slide. In addition, I really don't want to assign a single tip Action for each slide where function is required.

  If I put the conditional action to 'Continue' (instead of 'go to next slide') slide suspends indefinitely and not going anywhere. So, here I am, and I know that one of you has a very keen sense of the obvious. Thanks in advance for any action that you can provide (pun intended).

  Hello

  I notice you have two declarations "Go to the next slide" in the first example to separate. That seems to explain the behavior of the project move you TWO slides forward instead of one.

  Cannot explain why you do not get a scroll bar that allows you to choose. But maybe you can try using the arrow keys to move the selection to the desired slide pointer?

  The lack of a scroll bar seems to imply a bug. I suggest you report it as even at Adobe. (link in my sig line)

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• : 4 text button Captivate project, not to go to the next slide.

  When you test a published captivate project... I click on the button text to go to the next slide before the slide is made (because the learners will do) and the project stops.

  I prefer to use the buttons (as I believe they are).

  Thoughts?

  Thank you

  James

  Hello James,.

  Can you access the properties of the button and check under option - check the calendar - to Pause after, set it to 0.1 seconds.

  Now repeat and check if it jumpts your one-way drag or not?

  Thank you

  Anjaneai

• Why a slide should a double tap to move to the next slide, the others are simple taps

  Hello

  I have 4 slides of film in a keynote presentation.  3 of them, a single tap once begins the next slide.  But I have a slide film which stops, but needs two cocks to move on to the next.  They all look the same transitions and effects (IE, no)

  Any ideas?

  Barry

  The usual culprits are either an object on the slide, visible or invisible, with animation attached, or the slide is duplicated

• How can I prevent Captivate to advance to the next slide, after the end of the audio and I click on click to show/hide sidebar box?

  I currently have a slide that plays audio.  While usage is listening to the narration that I can click on three different click the boxes with advanced actions to open and close text boxes, I want the user to read the value.  When reading narrative ends and I'll click on the boxes to click to read a text box, it moves to the next slide.  I understand that I may have to replace the box with smart buttons click but I don't know how to stop the progression to the next slide.  I already have a next button that is put on pause until the user clicks.  Any help would be greatly appreciated.  I'm on a tight schedule.

  Quickly, I created a sample file, just have a slide with three form buttons that act as the toggles and a next button. The first three buttons break late exactly at the same time and the next button.

  Since it's the slide by clicking the audio stops no audio at all (common misunderstanding). I created a shared action, with the purpose to display and the variable (mine are labeled v_one instead of v_visib) as parameters:

  

  StarOne is what you want to show/hide. You can click on infinite time on each key to show/hide this element. He won't interfere not audio, once he started playing he will continue. When the audio is finished, you can still continue to click. Just click on the next button will advance to the next slide. It's my calendar

  

  No need to rewind the playback head in this case at all.

• Why my project does not hesitate a second before moving on to the next slide?

  Hello

  I have a problem on the first slide on my project.  When I press a button to move to the next slide, the audio for the second slide comes immediately as it should, but the project hesitates about a second before it ahead on the second slide.  This only happens with my first slide...

  Any ideas?

  Looks like there could be something heavy on this second slide that needs to load.  Any graphics or widgets or interactions it?  Have you checked the weight?

• several slides do not advance with going to the next slide or continue

  OK, so I think it's something simple, but I've been home long enough today I thought I should break down and ask. I have about nine slides with this same problem. My apologies in advance if I'm just having a bad day and missed a post that would have answered my question completely without having me ask

  I'm on Captivate 5.5, and the slides are simple - composed of two legends of text, a graphic, a front and a "back" button. The button image and back you can ignore it because they do not really play in this scenario.  The first caption text is visible, the second is hidden. I tried this two ways and or work in a manner:

  I have a button coded for success show 2nd legend text, three attempts, the value and the last attempt is made to go to the next slide (I also got it continue - or work). I went also as regards as a tip action (overkill I know) the code to make the text of the legend visible and then advance on the next click, but that does not advance the slide either. I must be missing something simple, but I'm really at a loss as to what it is! Any help is greatly appreciated! Thank you all!

  Becky

  I think that you may be overloading it.

  Why don't you just place the second text on the timeline of the slide caption appear just after the break point of the button?

  This way you won't need to worry about or HIDE or any action leading.  The timeline stops at the key, so that the user can read the first legend.  When the user simply clicks on the key the playhead continues to play and they see the second legend appear.  Either you have an another butto to pause the timeline once again to allow them to read at leisure or otherwise allow enough time before the end of the slide is reached.

• When I click on the Accordion widget it goes to the next slide.  I just want to let the 'response' to the show and then go on the following does not slip

  I'm building an Accordion widget with four bars.  When I saw it, and then click the 'question' the 'answer' is displayed for a second but then moves to the next slide and does not give me the time to click on the other bars.

  I compared to another Accordion widget that works fine and the sync settings are the same but works perfectly.  Any suggestions?  Thank you

  Well, I kind of thought to it.  I have 'next' and 'back' buttons on all other slides and when I copied them to all of a sudden it does not automatically go to the next slide.  No idea why, but heck, it works.  Thanks for the comments

• Go to the next slide, until you answer the question correctly

  I use Adobe Captivate 6 and I'm creating a quiz that if students continue to next slide, they need to answer this question correctly.

  Here's my setting.

  

  After above adjustment, when I reached this quiz, it did not continue. and then I answer incorrectly and then click on send, it shows that I have answered wrongly. Then I click on the next button, it allows me to go to the next slide. I guess I can't do that. May I know if the setting is correct? Thank you!

  Subscribe to the required option. Since you have endless attempts, user will not be able to get unless it provides a correct answer. And you didn't hide the next button, which means that it can not move. But I think it's a bad idea to allow navigation back, because when a user navigates back, the next button is not there, so it will totally get stuck.  And if you want to allow the review, you need the following button as well. And you don't hide the PlayBar, which means that the user can ignore the questions.

  I would reset the option you want on optional. Then hide PlayBar in Quiz and cannot move backward. Drag the next button under the clear button if you want the ability to review, but I suspect that this is not the case because you show slide of Score, which means that you won't have the review function.

• End - user to use a rolling caption before you can proceed to the next slide

  Hello.

  I have a legend of rolling I want that the learner to use before they can move to the next slide.  I don't know if I need to use a tip action or would it be better to use a click box.  Any suggestions would be greatly appreciated.

  Thank you

  Jeff

  Don't apologize, I know that there is no breakthrough book around anywhere. Maybe once I take my courage and start with it. I am using Captivate version 1 on, but really plunged into it with version 4.

  Have tried so much to persuade users to replace the old buttons by form buttons, not only on my blog, Twitter, LinkedIn, YouTube, but also at webinars for Adobe. For your case, either you have buttons shape on a slide, and indeed, you are right, in this case, you do not to apply this model of slides to the first/last slide. But you can also time such a button for the rest of the project. Which allows much more control because you will be able to start the Back only on the second slide button, and to hide the next button on the last slide because you have an identifier for keys that is not the case for the buttons on Master slides.

  OK, so you have the button next with his ID on this slide, it is possible to hide or - if you want to keep it visible, which I find a bit confusing to users, to 'turn off' on the slide. Deactivation will keep the visible button, but no what will be a click on it either. Hiding or disabling can be done with a simple action (Action accordion) for the event on enter on this slide.

  For your popup: create a simple text container (either a legend or... once again a form) and make it invisible by uncheck Visible output in the properties panel, branded this PopupTxt. I turn the text "See list" in an interactive object by putting a box to click on it.  To succeed in this click box, create an advanced action standard which will look like this:

  • See the PopupTxt
  • See the BtNext (where you use the ID of the next button on this slide)

  If you have disabled the Next button, not hidden, put another box to click on it. Having a pop up warning, have another WarningTxt text container (use a bubble shape? I'm the Evangelist of forms) with this warning, make it invisible as well start with. To this click box, I think you need the warning that only once, so create another standard action for its event of success:

  • See the WarningTxt
  • Hide the Click box

  And the click box on the «view complete list»

  • See the PopupTxt
  • Activate BtNext (where you use the ID of the next button on this slide)

  Hope this helps?

  Lilybiri

• Button Widget - need to move to the next slide, just keep

  I'm new to Cp 5.5. I was an expert in Cp4 and earlier, but due to changes in work, I haven't worked with Captivate in a few years and am just getting back to it. Certainly things have changed!

  I set up a model of slides and top right, I placed one of the widgets button static SWF that comes with Captivate. In the options for it that I put to go to the next slide when clicked, however on the preview is continuous on the same blade and not to jump to the next. I tried with a few swf buttons and they all work the same. I'm doing something wrong? Or is the code broken on these buttons?

  If the latter, then I guess my option if I really want to keep the appearance of the button (I do), then just use it as an image button?

  Hello and welcome back,

  The static button with Captivate 5.5 has no suspension, but it should work OK, done for me anywat. How did you test? You can insert a text with the variable rdinfoCurrentFrame of system caption to see if there is in fact no break to the next slide?

  If you want the static button with a point of suspension, halfway through his term, you can download it on my blog:

  I have (say) as in Captivate 5.5

  I do not understand your question? You don't want the image, not the functionality of this button? You should be aware that static objects can only be inserted on a master slide, non-interactive objects.

  Lilybiri

• Button click slide 1st time, opens URL. Click on the 2nd time, URL opens and jumps to the next slide.

  Well, I'm really confused here!

  I have a project that is created where on a screen, I www.xxxx.com and I put a button transparent, so when someone clicks on it, it opens a new window and opens the URL.

  This works.

  Here's the question, when I got back to the project and click on the link for the SECOND time, it always opens a new window with the URL, but it ALSO moves to the next slide. Nuts!

  Can someone tell me what could happen? It's so weird!

  Here is a screenshot on the properties of the button and the blade in the bottom of the screen.

  

  

  Hello

  A number of things here.

  First of all, I would never use a Transparent button. Try a Click Box.

  Second, when you added the URL there is also an option to 'continue the project to play. " You guarantee that was unchecked?

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Go to the next slide just after the completion of TEB (text input area).

  Hello all-

  I am using Captivate 4.

  I have a training course of the system where we require students to enter the date in BER.  After the date is entered, I want that Captivate to move to the next slide.  For example, on the screen 1, learner seizes '060510', then Captivate should advance to the next slide.

  I can do Captivate work very well with the menus text: for example, if the learner takes the correct menu item 'A', so I can put the shortcut to A key that causes Captivate to move to the next slide right now and very well.  But I can't figure out how to make this work with dates.  Any suggestions?

  I can explain why this works, but if I have the key set of shortcut input box text to be using 0 the ' or number: "drop-down list field, then both digital keypad and keyboard work for me.  If I set to include numberic keyboard, then select Numpad 0 AC doesn't work both ways.

  Try to use only the 0 in the number of drop-Numberic keyboard include unchecked.

• Why my printer will automatically send a fax when I want to just print?

  Why my printer will automatically send a fax when I want to just print?

  Hi pa_tom

  In your printers folder on your computer, is the default printer defined on your printer or your fax printer?

• Go to the next slide - problem!

  Hello world

  First thing: I'm not an expert in Captivate, but I learn every day to use this great software... so please, be patient

  QUESTION:

  I am trying to generate a course, very small and simple, but I have a problem: when I click on "Preview", I see that each slide appears after the previous. I need to let the user decide when he wants to move forward!
  Example: I have to generate a slide requiring 2 min of reading, but after this time, it is important to stop Auto progression. I chose not to show the progress bar but the problem remains.

  All commands in a standard advanced action will be executed in sequence. If you want to display an image, you need to allow time for the user to see the image before the read head moves to the next slide. If you are on 9 Captivate, you can use the command 'delay next actions. " An easy way that can also be used on previous versions:

  • Create the button with just the simple command continue
  • Start the chronology of the image just after the point of suspension of the button
  • Extend the chronology of the image until the end of the slide (CTRL-E)
  • Estimate how much time the chronology of the image must be.
  • When the playhead is released by the click of a button, the image will appear and playhead moves until the end of the slide, and then go to the next slide