Button Widget - need to move to the next slide, just keep

Similar Questions

• How to make a slideshow w/o it automatically move to the next slide?

  Hello

  I have a collection of photos that I want to "slideshowed". I would like that they expansions of to fill the screen. But I want control over how much time the slide is displayed. I want the control to say 'next' (as opposed to iPhoto moving to x number of seconds). I hope I described what I want.

  My question: is it possible? I know it sounds like something that you would do on PowerPoint, but I don't want to resort to that.

  Any suggestions?

  Thank you!

  You can't, but you can set the value display time of each slide to maximum 27 minutes 10 seconds

  

  or the value of each individual slide of a duration of 59 minutes:

  

  Who would do essentially the same thing as you want and allow you to move to the next slide, or return to the previous slide with the arrow keys on the keyboard manually.

  

• Go to the next slide just after the completion of TEB (text input area).

  Hello all-

  I am using Captivate 4.

  I have a training course of the system where we require students to enter the date in BER.  After the date is entered, I want that Captivate to move to the next slide.  For example, on the screen 1, learner seizes '060510', then Captivate should advance to the next slide.

  I can do Captivate work very well with the menus text: for example, if the learner takes the correct menu item 'A', so I can put the shortcut to A key that causes Captivate to move to the next slide right now and very well.  But I can't figure out how to make this work with dates.  Any suggestions?

  I can explain why this works, but if I have the key set of shortcut input box text to be using 0 the ' or number: "drop-down list field, then both digital keypad and keyboard work for me.  If I set to include numberic keyboard, then select Numpad 0 AC doesn't work both ways.

  Try to use only the 0 in the number of drop-Numberic keyboard include unchecked.

• Why a slide should a double tap to move to the next slide, the others are simple taps

  Hello

  I have 4 slides of film in a keynote presentation.  3 of them, a single tap once begins the next slide.  But I have a slide film which stops, but needs two cocks to move on to the next.  They all look the same transitions and effects (IE, no)

  Any ideas?

  Barry

  The usual culprits are either an object on the slide, visible or invisible, with animation attached, or the slide is duplicated

• When I click on the Accordion widget it goes to the next slide.  I just want to let the 'response' to the show and then go on the following does not slip

  I'm building an Accordion widget with four bars.  When I saw it, and then click the 'question' the 'answer' is displayed for a second but then moves to the next slide and does not give me the time to click on the other bars.

  I compared to another Accordion widget that works fine and the sync settings are the same but works perfectly.  Any suggestions?  Thank you

  Well, I kind of thought to it.  I have 'next' and 'back' buttons on all other slides and when I copied them to all of a sudden it does not automatically go to the next slide.  No idea why, but heck, it works.  Thanks for the comments

• Button click slide 1st time, opens URL. Click on the 2nd time, URL opens and jumps to the next slide.

  Well, I'm really confused here!

  I have a project that is created where on a screen, I www.xxxx.com and I put a button transparent, so when someone clicks on it, it opens a new window and opens the URL.

  This works.

  Here's the question, when I got back to the project and click on the link for the SECOND time, it always opens a new window with the URL, but it ALSO moves to the next slide. Nuts!

  Can someone tell me what could happen? It's so weird!

  Here is a screenshot on the properties of the button and the blade in the bottom of the screen.

  

  

  Hello

  A number of things here.

  First of all, I would never use a Transparent button. Try a Click Box.

  Second, when you added the URL there is also an option to 'continue the project to play. " You guarantee that was unchecked?

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• Why my project does not hesitate a second before moving on to the next slide?

  Hello

  I have a problem on the first slide on my project.  When I press a button to move to the next slide, the audio for the second slide comes immediately as it should, but the project hesitates about a second before it ahead on the second slide.  This only happens with my first slide...

  Any ideas?

  Looks like there could be something heavy on this second slide that needs to load.  Any graphics or widgets or interactions it?  Have you checked the weight?

• Go to the next slide - problem!

  Hello world

  First thing: I'm not an expert in Captivate, but I learn every day to use this great software... so please, be patient

  QUESTION:

  I am trying to generate a course, very small and simple, but I have a problem: when I click on "Preview", I see that each slide appears after the previous. I need to let the user decide when he wants to move forward!
  Example: I have to generate a slide requiring 2 min of reading, but after this time, it is important to stop Auto progression. I chose not to show the progress bar but the problem remains.

  All commands in a standard advanced action will be executed in sequence. If you want to display an image, you need to allow time for the user to see the image before the read head moves to the next slide. If you are on 9 Captivate, you can use the command 'delay next actions. " An easy way that can also be used on previous versions:

  • Create the button with just the simple command continue
  • Start the chronology of the image just after the point of suspension of the button
  • Extend the chronology of the image until the end of the slide (CTRL-E)
  • Estimate how much time the chronology of the image must be.
  • When the playhead is released by the click of a button, the image will appear and playhead moves until the end of the slide, and then go to the next slide

  

• How can I prevent Captivate to advance to the next slide, after the end of the audio and I click on click to show/hide sidebar box?

  I currently have a slide that plays audio.  While usage is listening to the narration that I can click on three different click the boxes with advanced actions to open and close text boxes, I want the user to read the value.  When reading narrative ends and I'll click on the boxes to click to read a text box, it moves to the next slide.  I understand that I may have to replace the box with smart buttons click but I don't know how to stop the progression to the next slide.  I already have a next button that is put on pause until the user clicks.  Any help would be greatly appreciated.  I'm on a tight schedule.

  Quickly, I created a sample file, just have a slide with three form buttons that act as the toggles and a next button. The first three buttons break late exactly at the same time and the next button.

  Since it's the slide by clicking the audio stops no audio at all (common misunderstanding). I created a shared action, with the purpose to display and the variable (mine are labeled v_one instead of v_visib) as parameters:

  

  StarOne is what you want to show/hide. You can click on infinite time on each key to show/hide this element. He won't interfere not audio, once he started playing he will continue. When the audio is finished, you can still continue to click. Just click on the next button will advance to the next slide. It's my calendar

  

  No need to rewind the playback head in this case at all.

• Do all click on the required boxes before moving on to the next slide

  I created a screen with three areas of click and the next button. The learner will need to click on all three before click boxes he can click next to move to the next slide. If they do not click on all three boxes, that they must get a message saying: they need to view all content before continuing. Does anyone know how to program the next button to require the three click on boxes to be clicked before proceeding?

  Thanks in advance,

  ~ A

  Issue has been addressed several times in this forum. You don't need to program the next button, but click areas. I guess they don't have to be clicked in order? In this case:

  1. create three user, for each box click variables: v_one, v_two, v_three and give them a default value 0
  2. hide the next button (in the Properties Panel - since I don't know the version, wrong in detail)
  3. for each button click on create an advanced conditional action with two decisions:
     • First decision is a standard simulated action "always."
       IF 1 is equal to 1
       Assign the v_one with 1 (change of variable in the actions for the other boxes two click v_two, v_three)
     • Second decision checks the value of these three variables
       IF v_one is equal to 1 AND
       v_two is equal to 1 AND

  v_three is equal to 1

  See the Bt_Next

  Be sure to have the suspension of the next key point later that the point of putting paused click boxes. This means that we need to shorten the timeline of the boxes to click and check the properties of the button sync

  Lilybiri

• End - user to use a rolling caption before you can proceed to the next slide

  Hello.

  I have a legend of rolling I want that the learner to use before they can move to the next slide.  I don't know if I need to use a tip action or would it be better to use a click box.  Any suggestions would be greatly appreciated.

  Thank you

  Jeff

  Don't apologize, I know that there is no breakthrough book around anywhere. Maybe once I take my courage and start with it. I am using Captivate version 1 on, but really plunged into it with version 4.

  Have tried so much to persuade users to replace the old buttons by form buttons, not only on my blog, Twitter, LinkedIn, YouTube, but also at webinars for Adobe. For your case, either you have buttons shape on a slide, and indeed, you are right, in this case, you do not to apply this model of slides to the first/last slide. But you can also time such a button for the rest of the project. Which allows much more control because you will be able to start the Back only on the second slide button, and to hide the next button on the last slide because you have an identifier for keys that is not the case for the buttons on Master slides.

  OK, so you have the button next with his ID on this slide, it is possible to hide or - if you want to keep it visible, which I find a bit confusing to users, to 'turn off' on the slide. Deactivation will keep the visible button, but no what will be a click on it either. Hiding or disabling can be done with a simple action (Action accordion) for the event on enter on this slide.

  For your popup: create a simple text container (either a legend or... once again a form) and make it invisible by uncheck Visible output in the properties panel, branded this PopupTxt. I turn the text "See list" in an interactive object by putting a box to click on it.  To succeed in this click box, create an advanced action standard which will look like this:

  • See the PopupTxt
  • See the BtNext (where you use the ID of the next button on this slide)

  If you have disabled the Next button, not hidden, put another box to click on it. Having a pop up warning, have another WarningTxt text container (use a bubble shape? I'm the Evangelist of forms) with this warning, make it invisible as well start with. To this click box, I think you need the warning that only once, so create another standard action for its event of success:

  • See the WarningTxt
  • Hide the Click box

  And the click box on the «view complete list»

  • See the PopupTxt
  • Activate BtNext (where you use the ID of the next button on this slide)

  Hope this helps?

  Lilybiri

• cfpresentation - manually switch to the next slide

  Hi All-
  
  By creating a slide show with the new cfpresentation/cfpresentationsilde tags, I was wondering if there is a way to let the user to manually navigate to the next slide instead of use the "duration ="value"" attribute in the tag cfpresentationslide (which causes the preso just continue to the next slide after the number of seconds). Anyone know?
  
  I think that this added functionality is ideal for the CF and I'm blowing all repositories PowerPoint presos. I even built a report showing data exchange using the tag cfexchange! Awesome!
  
  Thanks in advance for your help-
  
  Rich

  Hell I have to stop being so lazy...

  After a quick review on the Livedocs for CF8 (which I love btw) the answer to this problem is to define the attribute of automatic reading of the tag cfpresentation on 'no' (or 'false'), which translates as "the user must click the Play button to start the presentation, and click the next button to move to the next slide in the presentation."

  As an added benefit of this feature already-cool-and-be-cooler, this link ( http://www.coldfusiondeveloper.com.au/go/news/by/ray-camden/DE8E6506-C09F-4506-91E4B50AFCB CF9C7 /) talks about how a presentation can be generated, saved to a file, compressed and sent to a user and read WITHOUT CF.

  This opens up many doors...

  Rich

• Stop the slides automatically advance to the next slide

  It seems this would be a common request, but I can't find a solution anywere.
  Captivate automatically moves to the next slide when the previous slide ends. I would like to stop and wait for the user to click on the 'Next' button on the control of playback.
  I don't want to have to add another button 'Next' to each slide. It would be redundant and time consuming. I just want to use the next button in the playback controls. How can I get each slide to stop and take a break?
  
  Is this possible?

  Can I have answered my own question, BUT I would like to know if experts here have a better way to do this...

  Solution: Add a new text button to slide 1. Empty the text on this button. Select the option to make the button "transparent". Then copy the button to the Clipboard. Select all of the slides in the project. Hit the dough.

  All the slides have now a 'hidden' object that stops them. They can click on the next button in the playback controls to move forward at the end of each slide.

• How to go to the next slide during Drag and Drop

  I'm trying to go automatically to the next slide after the user makes a three 'drop zone' drag and drop.

  I see the action on the successes in the Panel. I chose to go to the next slide, but nothing happens after I have test.

  I also put in place the right answers for the drop areas three and thought that could trigger the part of "success."

  but still nothing happens.

  Any thoughts?

  Hi again,

  I understand, but in order to move to the next slide automatically the drag and drop must be introduced. It doesn't matter whether or not you include your drag and drop in a quiz. The option to send automatic drag / move it will include not a quiz, is to check if the answers are correct or not. You can leave to include it in an unchecked quiz.

  Thank you!

• 'Forward' to move to the next audio file button does not work with audio books.

  Hi all

  My first problem I can't understand mine. I did a search through old messages using several key words and couldn't find it.

  -Sansa Fuze worm-1...

  -New firmware dated 12/27/09

  Mode - MSC

  I buy the audio book CD and then extract them to MP3 so I can listen to on the "rocket". I put all the MP3 of the book in a directory, use Mp3tag to put in place a track number, title, author, and such then I drag the folder to the folder "audiobook" on the "rocket".

  I start to play the first file, and most things work very well. The documents in the file and I cannot FF or REW in this file. When this file is complete, the "rocket" ahead to the next file of its own. Bookmarking works fine. When I try to use the 'next' button to move to the next file, however, nothing happens. If I try to use the 'back' button to go to the previous file, nothing happens. Very strange.

  The button works fine when I'm listening to MP3 music. I can jump forward or backward through the tracks normally. It is the same with podcasts.

  I don't normally jump before the audio book titles, but sometimes I'll do it if I lose interest in the book and hope to find something more interesting on a next track.

  Thanks in advance for any help with this one.

  See you soon.

  Generic audio books works a little bit differently from the Audible.  New audio book functionality, allowing any type of playable, always has the option of cool chapter mode, but it functiond otherwise than by playing an Audible book.

  Sound files have chapter breaks that can be selected in the part of the main work.  "Regular" audio books have just chapter-titles.  Try to select the chapter mode; It affects to jump between tracks.

  Bob