Captivate 9 - include the text box entry to the quiz

Similar Questions

• cannot delete the text box entry - break cp8

  I have two text input boxes and a button smartshape on a slide.

  Text entry areas require username, stores the responses into variables. The button moves to the next slide. I don't want the button to pause the slide, but not text entry areas.

  When I uncheck the 'pause after"in the properties of the input synchronization for each of the text boxes, the break is always carried out for each. In fact, icon pause shows still on the layer of the timeline for each as well.

  The result is that my slide stop 3 times instead of once:)

  It's Captivate 8, sensitive project.

  It is for some a bug in CP8, in previous versions you can change the time of the break, but you can disable it. Must be a design fault, using the same properties of timing for each interactive object to CP8 (to make it "clear").

  For me, it makes sense that you can't disable pause in BER, since it must wait for an input from the user. It's the same for question slides, no way to disable the pause, you can move only. For BER you can move with the synchronization properties, which is not yet the case for Question slides where you (still) that slide on the Timeline can move the point of interruption.

  Why should you get this button? If it is designed as a next button, do you want so that it can move without entries in of the TEB? Then set its action to 'go to the next slide", not to continue?

  Lilybiri

• Recorded an assessment and it get stuck in text box entries

  Hello

  I am using Captivate 3 and have been successful in the record of assessments in the past.  Now I record a tutorial on how to add pictures to a word document, resize them, the crops and the title and comment on the photo.  The tutorial has what I call a 'show me' then a ' try me '.  The demonstration (show me) works very well.  Assessment (try me) I record directoy after the demonstration includes the entries in text box and it is the first time one of my assessments included those, and they seem to be my problem.  First "interesting" thing that happened was that the text boxes is across the width of my project, so I had to shrink them down in the target area.  Once I got in the zone I and I run the project, everything works perfectly until I have to text entry areas.  I am able to enter text... but that's all.  I can't move or click anywhere else.

  I enclose the screenshots... not sure that this will help.

  1. First screenshot is the first entry in the text box. where the living room of words should be typed.
  2. Second screenshot is the next slide when I thought that I should be able to go down and place an X next to all the paintings.  BUT as you can see I went from the text a little box and there is no evidence of the words salon.
  3. Third screenshot is where I went from the entrance area of text upward slightly to see only the word life is available, BUT it looks like now, he wants me to click next to paint all the... but at the same time waiting for the word room complete.  (It so I hope that makes sense)
  4. The last screen shot shows the entrance of the living room full and now it seems that he wants me to check next to paint all EXCEPT I can't get past the first screen shot.

  Thanks in advance as well as enjoy all the thoughts that anyone can pay to solve this problem.

  Sherrie

  It is not very clear on your screenshots, but it seems to me that, in the first screenshot, the text entry box is inactive from the outset (looked at the timeline). Ditto for the second and fourth screenshot. Only the third seems to have an active region for ETB. An interactive object that is set to inactive, according to me, you can have no interactivity. Could check you?

  Entry in BER must be confirmed: a Submit button (is not here) or a shortcut (default is to Enter). What did you choose?

  You talked about TEB spread over the whole project, which could mean that in the tab Options of the properties of the BER, the option "Display for the entire project" has been activated in the calendar. It is here that you can change the calendar and the active/inactive time period.

  Maybe it was the explanation that you need?

  Lilybiri

• How to create a text box entry in muse?

  I use Muse to create prototypes for a web application and you want to insert a simple text input field. The field must not record, just allow a user to be able to type text or numbers inside easily. I tried to use the widget of forms, but it does not deprive the fields or the submit button. Any help would be appreciated. Thank you.

  Hello

  Can you please clarify what exactly you are trying to reach, text box can be inserted on the page, but you do not want to save?

  You want to allow users to type but not keep?

  Useful link:

  Color of comment box

  Thank you

  Sanjit

• How to control the width of text box entry with javascript?

  I use variables for positioning text entry areas.  I have worked how to move left/right, but cannot control their width, although I can do for regular active forms:

  var myButton = document.getElementById ("Text_Entry_Box_2c");

  MyButton.style.Left = textLeft2 + 'px ';  / / this works

  MyButton.style.Width = textWide2 + 'px ';  //This doesn't work

  Anyone could do this?

  Your actual input field is:

  getEntry var = document.getElementById ("Text_Entry_Box_2_inputField");

  getEntry.style.width = 250 + 'px ';

  I found that I need to use a setTimeout before the item is actually in the DOM.

• The text box entry (Activate button disable)

  Code:

  This.tf1_txt. Text = "";

  This.tf1_txt.OnSetFocus = function() {}

  tf1_txt. Text = (tf1_txt.text == "")?  "": tf1_txt.text;

  }

  {if (this.tf1_txt. (Text=="")}

  This.submit_btn. Enabled = False;

  } else {}

  This.submit_btn. Enabled = True;

  }

  This.submit_btn.onRelease = function () {}

  gotoAndStop ("complete");

  }

  I have the code above in image1 and onRelease Button send the user is taken to another frame marked complete.

  Although the Send button gets disabled using if (condition), it does not with another when I enter any text in the field.

  The Submit button must be activated when the user enters text.

  This code should run when text is entered:

  Code:

  This.tf1_txt. Text = "";

  This.tf1_txt.OnSetFocus = function() {}

  tf1_txt. Text = (tf1_txt.text == "")?  "": tf1_txt.text;

  }

  {This.tf1_txt. OnChanged = Function ()}

  {if (this.tf1_txt. (Text=="")}

  This.submit_btn. Enabled = False;

  } else {}

  This.submit_btn. Enabled = True;

  }

  }

  This.submit_btn.onRelease = function () {}

  gotoAndStop ("complete");

  }

  I have the code above in image1 and onRelease Button send the user is taken to another frame marked complete.

  Although the Send button gets disabled using if (condition), it does not with another when I enter any text in the field.

  The Submit button must be activated when the user enters text.

• Looking for a free tool allowing clients to easily update a text box on their Web site.

  I just finished a website for a client, and I am looking for a free tool (something similar to Wordpress) which would leave my client to easily change the text on the site.  I don't want to have full access to the code on the site, just include a text box that they can make changes every time that the envy.  I'd rather have something that was transparency it so the text would look just like the rest of the site, but is not a must.

  Thank you.

  Have you ever watched a few options?

  You're thinking about something like CushyCMS or something different?

• You can prevent a user copy and paste in a text box Widget?

  Hello

  I use the Widget text box in a custom quiz that I created.  Is there anyway to prevent a user to paste into the text box?  Basically, I need to make sure that students to type in the answer, not just copy a document and paste in the text box Widget.

  Initially I was using BER (which naturally seems to avoid this) but moved to Widget text box, so I could to format the text.

  As always, I appreciate the help!

  Leigh

  They can also paste a TEB, sorry. You can provide such a limitation. The interaction of the scrolling text can be used to display the text (check the 'read only' option) or to allow the user to enter text.

• Captivate 9 - text entry area - cannot navigate through the input of text boxes on the same slide using enter key (works only tab)

  I designed a slide that has 3 areas of text entry.

  I need the user to be able to type in their response to the first box and then press the ENTER key, it will pass them in the next text box. After typing in their response to the second box, press ENTER, and then have developed pass to the third area.

  I don't want to use tab, I want to go to work as a shortcut key, so this works well on all devices. It feels like a trip to the logic of the user.

  I removed the button SUBMIT and check the validate user input.

  I put the shortcut key to ENTER in propriety / Actions area

  However, after that type in an answer and pressing on enter, the focus is not moved in the input text box available at the following address on the same blade.

  This happens regardless of browser (tested Firefox, Chrome, Safari, and IE9/10) and also OS - Windows 7, Mac OSX 10.9, 10.10 and latest version of iOS

  Only the tab key works (Ive even tried with other keyboard shortcuts and it always comes back to TAB).

  I know that this feature is possible in Captivate 9. I have read and watched many tutorials online, it seems a very basic feature. I could be wrong.

  This is a feature of wholesale/known or I'm doing something wrong.

  If a bug, is there a plan to fix it soon?

  Indeed, your problem is related to the Enter key as a shortcut key, not to have multiple TEB and one absolutely validation button. Take a look at this article very old (you are not the first to ask about this):

  A submit button for multiple text entry boxes? -Captivate Blog

  But here I explained to indicate to the user click in a next TEB, do not use input.

• Captivate 7 - I created a file but when I re - open, I can't see the text in the text boxes until I click on each text box.  Is this a known issue?

  Hi, I created a Captivate 7 file.  I have some text boxes on each slide.  However, when I close the file and re - open, search text boxes empty.  The text appears again when I click on the text box.  However it is visible in the film.

  When I preview the file, the text does not show in the text boxes.

  Anyone had any experience of this problem?

  Thank you very much

  Anne

  Generally fixed by clearing out the Cache of your project.  You did recently?

• Captivate 9 - mailto: links appear not to if the text box contains the variable (HTML 5)

  Hello

  If I create a link mailto: link using text that contains a variable, it is not displayed in the output HTML 5. The text is there, and the link works, it is not visible.

  Here is the slide in Captivate:

  

  If the slide is out 8 lines - 2 of each set of 4 should be links. The first are web links, the second are mailto: links.

  The result in a browser is:

  

  As you can see the link with the variable email is not displayed. Did the same thing on the iPad:

  

  The link is there however, you can click in the box, it takes in the browser (or typing on the ipad) and a new email is created.

  
  

  Check if the source says:

  
  

  
  

  
  

  Anyone get this problem or knows how to fix?

  
  

  I think I must be missing something obvious? For any help or suggestions appreciated.
  

  
  

  It is a new installation of Captivate 9 - no preferences changed or the custom template used. Just a new project.

  
  

  Captivate on Windows 10 Build 10240 9.0.0.223
  

  Just in case someone else looking for this issue - Adobe he recorded as a bug (reference: 4100016).

• How can I stop the Captivate adding in text boxes / tone clear when I film a project?

  Morning/afternoon

  Whenever I have a new Captivate 4 adds project always in the additional text boxes with 'Click on OK button' and 'Opens a window setting' and also adds in the film's point culminating own boxes.  How to disable this option?  It's not so much of a problem that I have to go in and edit each screen anyway, but I was wondering if there was a way to stop appearing in the first place.

  Thank you very much for your help,

  Michelle

  Hello

  This by changing recording preferences.

  Click on Edit > Preferences > recording > Modes and choose one of the modes. Demonstration seems a likely choice.

  Select or clear the options you want.

  Click on the image below to see full size.

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• including the inset spacing text boxes

  My text boxes always have a space inset a.125 how to reset it to 0?

  Object > text frame Options. Set the Insert to 0 without papers open to make the default value of the application

• Entry text box does not work properly when repeating the Quiz

  Dear user of the Adobe Captivate Forum, I use Adobe Captivate 8. I created a slide with eighteen TEB on a slide. User must confirm with the Enter"" key. If the user tried the first time, it works great. The results of Quiz Slide, I gave the user the opportunity to try again. After a few field blocking the system. Sometimes she only maybe it happens after 7 fields, sometimes, it happens after 9 fields. It's always different. I had this experience by testing with an executable file. I tried on different computers. In the Quiz results slide, by activating the slide, I have the top variables to 0. There are no specific options in all areas. Could you tell me your experience or send me a feedback? Thank you very much for your efforts. Cordially to Leobersdorf in Austria.

  ICH muss mich entschuldigen, Gerhard. I do not work for Adobe, just a user of Captivate (freelance consultant/trainer), I cannot accept the debug files. You can post screenshots, or more details in this forum and I'll try to help out you.

• Highlight the area of text disappearing when a variable is used in this text box

  Dear all

  I spent ages setting up a quiz in Captivate 8 allows partial scoring on several slides and then provides feedback to the accepting of a quiz on correct/incorrect responses.  Because the partial scoring options from Captivate are so limited, I had to make abundant use of the advanced Actions number of (a) the number of correct answers (assigned to a variable called "c1") and then (b) if some but not all the answers are correct, display a text box stating the number of correct answers.  The text in the text box is simply "You got $$ c1$ $ right." and results in the text box saying 'You're right' 2 If c1 is 2.

  However, for some reason any highlighting in the text box turns off if I put a variable in there.  For example, if the text box has the normal orange highlight given to partially correct captions, this nail does not appear if I include the variable, but it does not appear if I simply say "Partially correct.".  Does anyone know how I can fix this you problem?  I have searched previous questions on this site and on the internet but couldn't find anything.  I also tried to clear the cache of Captivate on my computer, but it does not help this problem.

  All the most popular thoughts.

  Simon

  Replacement of the legends of forms for SFH is only available since this version.

  The only interactive object that can be added to a question slide is the form button.

  Buttons on Question/Score of Captivate 6 slides? -Captivate Blog