Captivate 9 Widgets are not Compatible HTML5 am using a sensitive project and Widgets work Firefox not IE 11

Similar Questions

• If anyone can help, I just bought a 2011 mac book pro and I use it for school and I work in education and currently I have lightroom, photoshop and adobe DC, are all the other apps I put on it?

  If anyone can help, I just bought a 2011 mac book pro and I use it for school and I work in education and currently I have lightroom, photoshop and adobe DC, are all the other apps I put on it?

  Chaka - welcome!

  What you want to do on your "new" MBP?

• I tried to install something on the account of other users but my admin password does not work, I logged my account admin to make sure that im using the correct password and it works? any suggestions

  Works of password to log into the admin account

  password does not work to install the software on other accounts

  This will happen when different keyboards are installed. Try to use a password like 123456 is insensitive to the different schemes. CapsLock or NumLock is also a frequent culprit in such cases.

• Captivate 9 characters are not download

  Upgrade C9

  I used characters quite easily in previous versions. But when I try to use most of the C9 (not those of the assets/eLearning Bros) characters, it says the image is not present and click the link to download the images. When I click on the link, only a white page - no way to load in another browser, because I don't know what the connection is.

  -How can I download the C9 characters?

  SMILES,

  Susann

  Just try, it's the link that little time, I saw:

  http://www.Adobe.com/go/Cp9_win_assets_installer

  There download a file from 1, 4 GB. Have you checked if no download has started, because this link has disappeared very quickly.

• Are there integrated sound to use for the good and the bad?

  Mac OS 10.8.5

  Captivate 7

  I started working with this about two months ago and seem to remember to come through sound effects ready-to-go to drag and drop the success and failure. If they do not exist, what are the file names? I think I have deleted them inadvertently.

  But was such a jumble of ignorance that I am not even sure that my memory is good.

  @RIck, she never install sounds indeed.

  But in the Gallery\Sound, there is a subfolder DragDrop. He has an IncorrectSound.wav and 3 soundx.wav files. No doubt those who have been used.

  @dowbright to avoid having to reinstall, I have this folder (you can't download wav) zipped and put it on acrobat.com. Here is the link: https://workspaces.acrobat.com/?d=iEfx4X-dl2TU * MC * NMDSZQ

• where are my data after the use of Dell backup and recovery

  Three check marks displayed on a Dell backup and recovery, which, I suppose, finishing meant that my backup was successful (using Windows on a Dell Inspiron 8.1).  Where my data is sent to after the use of Dell backup and recovery?

  

  Click on the 02:22 mark of the video.

  www.YouTube.com/watch

• Associated error - "Server features are not compatible with UCS below.

  Hi all

  I am tempted to associate a SPG which the UCS field but get the following error. Under the general tab:

  There are not enough global resources.
  field of the UCS has no server corresponding to this service profile features.

  And under the status tab:

  Descriptor of the stage: analysis of changes impact(FSM-STAGE:sam:dme:LsServerConfigure:AnalyzeImpact)

  Tent: 0

  Previous state: ConfigureFail

  Remote control Err Code: 5

  Distance Err Description: Server features are not compatible with UCS below.

  Distance Inv result: resources-out of stock

  The field of the UCS that I associate this GSP which is an existing domain, I have just signed up with Central UCS. I created and associated with a GSP scheme a UCS of greenfield in another area data center.

  The two areas are running UCSM 2.2 (6 d). Central UCS is 1.4(1a).

  I found a bug that suggests this may be due to the presence of a policy to Boot, but the workaround solution (remove the startup policy) does not work in this case.

  So, anyone know what might be going on here?

  Thank you

  Richard

  Richard,

  Please check the following bug: CSCuy07572

  You can use the global default and should work completely correctly.

  You can choose the version that is required here.

  Non-policy default will be a problem.

  Thank you

  Yoga

• Droid A855 USB cables are not the same.

  I have nearly 20 of the Verizon Droid. We used Treo pro for Sprint, but they have been undermined by the poor coverage of Sprint and a rate of 25% of failure in a year.

  When I got the Droid A855, I tried using that Treo Chargers and it worked very well. However, if I used a USB cable from the Treo to a USB charger, the screen would go crazy until the cable has been removed. I got the same results of OEM Samsung cables that would be compatible with the Droid. I had to return 10 of the Samsung cables after attempting to convince the seller that they do not work on the Motorola Droid A855.

  After reading some of the discussions on this site, I got the impression that there is a USB standard following cell phones. My experience is just the opposite. Anyone can comment on this fact?  Can I buy a cable from someone else than Motorola and operate in the USB Chargers?

  I believe that the question can be some of your instruction ect but shielding the supply itself is a more important factor. USB is not very consistent as a source of energy. The only battery charger, I bought today from verizon said he did not use a normal usb computer cable and charge the batttery. I've had questions, thinking that it was the cable, experimenting different supplies of cables and charger it is the charger port or usb, not on the cable. I also use a generic cable and one who came with an LG Dare phone and three others, seem all verizon/Motorola. All work fine as long as two or three lightwieght chargers are not used. These same circumstances are repeated with the Ipone has my son, even if we don't change cables, Chargers fair.

• hp photosmart 5510 series: photosmart hp 5510 series files are not found

  Hello

  I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

  Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

  Welcome to the HP community @Blizzerd,

  I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

  Here are the steps for you.

  1 uninstall the printer software, and then restart your PC.

  2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

  Test print and scan and let me know what happens! I hope that does the trick

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• CP9 sensitive project - where are the transitions between slides?

  Transitions between slides are available via the sync Panel when you create a blank project (unfounded).

  Where are the transitions between slides when you use a sensitive project? The distribution Board is not in the property inspector.

  Certainly, it is always possible to add a transition between slides for a sensitive project? If so, how?

  The slide transitions are not supported for projects of a reactive nature, they are not yet supported for the release of HTML5. The distribution panel is available (at least in the Expert user interface), you can apply a transition, but HTML5 Tracker will indicate that this is not a supported feature.

• Should what the canvas size I use for my project of e-Learning 8 Captivate?

  Hello world!

  The maximum size of my e-learning project is 740 x 555, so that it can adapt to the size of the LMS. E-Learning has a Table of contents and the skin Editor, but of cause I want to use as much fabric as possible.

  It's been a while since I worked with Captivate and has a fragile memory of the published version adds a few pixels. Is it still OK for 8 Captivate?

  Canvas size what do I use to make e-Learning made the LMS, but always include the Publisher of skin and OCD?

  ARO

  Madeleine

  Are you talking about a normal or sensitive project? Is the table of contents separate or overlay? If it is separate, it will add 250px width if you change the width of the table of contents that is now possible. Ditto for the playback bar: is that overlay or not? If this isn't overlay, the number of pixels added to the height depends on the chosen playback bar. You can check its height by looking at the width of the bottom border in the skin Editor. This lower border fits the selected playback bar.

• Custom Quiz with master Widget are not related to the LMS (Captivate 5.5)

  Hello

  I wrote a quiz with partial credit and, in order to make answers, I use the master Widget. (A big thanks to Lilybiri and Infosemantics for all the advice I found in blogs and learning classes!)

  In summary, the quiz is composed of 2 questions with 4 possible answers.  Each of the 4 answers have a different score attached to it (i.e. to answer a = 4 points; Answer b = 3 points answer c = 2 points; Answer d = 1 point).   On each slide of the question, I have added a Master Widget (using the variable representative points the student received as a slave).  I want the quiz to report the score for each question.   After the student has answered these two question slides, they continue to a slide 'results '.  Here, they consider the total of their scores and get your comments on if their total is high, too low or online.  On the results page, I used the master Widget itself to make the quiz on the total score.

  I downloaded this quiz as a package SCORM 2.3 Moodle and Blackboard 9 (we are different systems LMS to test).  The short quiz in each LMS, but when I try to access a report, I get no results: no report received for each item quiz and no total score points.  Indeed, in the table, I get a blank page:

  

  In Moodle, I get:

  

  Here's what to look like my quiz preferences:

  

  I'm really stuck.  I realized there are many components to this process and I really need help to find out where the problem lies.

  Thank you for your time and help!

  Bray,

  Yes the numbers on the slide of questionnaire results are important because they indicate that some of your widgets or other interactive objects are not reported to the "official" quiz score

  You must go back and check the objects you want to appear in the score.  The score of 67% reported by the quiz on the quiz results slide probably means that Captivate think you have only three objects within the quiz and only two of these (two-thirds or 67% in round numbers).

  You mentioned before that you have three Master widgets in this project.  How many of them can be found in the report for the quiz?  To check if they are all considered to be successes, turn on Success and Failure subtitles for these widgets, and then run through your interaction.

  When you use a Slave to Variables with the master of widgets for partial credit, remember that even if the captain widgets can account for these variables as being interactive objects, Captivate does not work.

  Although the captain widget is VERY powerful, it also tends to mess with minds, because there are SO many ways you can configure. If you use partial credit, check if you have the option to bypass the assigned score own widgets with the total score of points from the slave value objects.  If you use this option, you must ensure that at no time can the substituted score not fall within the range 0-100% compatible SCORM LMS will accept.

• Widgets compatible HTML5 for Captivate 8

  Anyone know where I could find a list of html5 widgets that can be used with Captivate 8?

  Jay, you will be very disappointed. As far as I KNOW, in addition to the Interactions with Captivate, included only Jim Leichliter has two widgets compatible html5. Take a look on his website:

  http://captivatedev.com/2012/11/12/Adobe-Captivate-6-x-widget-Google-LMS-with-email-report ing-2.

  http://captivatedev.com/2012/08/07/Adobe-Captivate-6-x-widget-Web-page-Widget/

  Lilybiri

• Captivate 8 widget printing does not print in landscape. impressions full resolution of the project and not only the certificate?

  I'm new to Captivate and am responsible to learn how to use Captivate 8.  I must add a certificate of completion at the end of my project and have a lot of questions for which I can't find answers! Please, if anyone can answer these:

  (1) I don't want the certificate to print up to that score the quiz reaches a specific minimum - for example, you need a score of 80% or more to print a certificate.  How do I do this with the print widget?

  (2) the certificate to print without the slide background and resolution of the project - in other words, I want only the image of certificate (with text added for name box) to print in LANDSCAPE, without the user having to do all the settings on their end (choose the landscape to portrait with their printer).  How is this accomplised?

  (3) I want a date on the certificate - how can I add this specific item?

  Without a widget of certificate and the use of Flash with this version, I'm confused as to how exactly Captivate offers the ability to print certificates?  I don't know of HTML5 and am uneven with Javascript.  Why a feature such as certificates and the ability to print them would be something illegal?  No tutorials, no clear advice exactly get this popular feature of development of training material.  Me think there should be MUCH easier to achieve, but I am confused at this point.

  The solution I found is this:

  Do not use the printing of 8 Captivate widget. It simply does not work the way it should be able to work.  Unless you are able to scripts in Actionscript 2.0 and have access to an old version of Captivate, there is no way to work around this bug.

  The problem I found is 8 Captivate will allow you only to use Actionscript 3.0 in Flash; You can open the widget in Flash, but you MUST open through Captivate first if you intend to use in Captivate.  So, once you open the widget for adjustments through Captivate, it automatically selects AS 3.0 as scripting language to use, no choice is available.  IF you have Captivate 7 or less, however, it allows you to script in AS 2.0.  I didn't, so I can't help you in the widget script.

  What I ended up doing was, I made my own certifcate in Photoshop, saved as a. PNG and added to the last page. Using the internal encoding of Captivate I said the program just go to slide if the quiz was successful.

  Print: Go to the fenΩtre > Skin Editor.  On the left are boxes to check the playback bar options - check out 'Show the Playback Control' and then choose your theme. In the drop-down list, choose 'print '.  If you don't want to do anything else on the playback bar, then select the items; Choose where you want the PlayBar to show (I chose the bottom and down to the Center). See below:

  

  You can see the icons on the bottom, in the Center.  The icon on the left is the button print.  It works well, it can be to make choices print in your local print dialog box.  I have to tell him of the landscape print, for example, otherwise, it prints portrait and too small.  But this does not work, and it solves the problem of non-working widgets impression.

• Adobe Captivate learning widget interactions plays not published not in MP4

  I'm new to Captivate (this is only my third Captivate project) and have created a 9 Captivate presentation which was originally intended to be navigated manually during a discussion.  They loved the presentation so they want to make a video that will automatically play.  The problem that I am running is that the interaction of training widgets I've included work wonderfully in .exe (where they are manually sailed) but does not display the ancillary content when I publish the project in mp4 format.  (the final product must be in mp4 format)

  I don't know miss me some simple editing or sync settings.

  (Please don't tell me that it is impossible that I need to )

  Any help would be greatly appreciated.

  You don't always tell on what "interactions of training" you're talking about? If these are interactions like accordion, tabs, pyramid... you might consider these slides to record while you interact with them, using the video feature of Captivate demo. Such a cpvc-slide can be inserted into a cptx project.