EA4500 not find Netgear ReadyNAS 104

Similar Questions

• ReadyNAS 104 does not start. Out_of_memory error 354. After the upgrade to 6.4.1 #26323717

  6.4.1 installed from 6.2.5 yesterday. Everything went well. Did all the "computation". has worked well.

  No not from one day to the next with 354 out_of_memory error. now, does not start.

  I tried reinstallOS. No luck.

  totally stuck and he needs for businesses!

  You could try RO mode, see https://community.netgear.com/t5/Using-your-ReadyNAS/Readynas-104-won-t-boot-Error-354-out-of-memory...

• ReadyNAS 104 Admin page not accessible after firmware update

  Hello

  My admin page gives internal server error 500 since firmware upgrade 6.4.1

  I have noted a number of other posts on this topic but did not find a solution. Can still see some action and the unit can be seen on RAIDar, as well as through readycloud, but can not access the admin page to change the configuration or the applications.

  Concerning

  Steve

  When you updated to 6.4.0 your date has been reset. I wonder if that triggered it:

  31 Dec 14:09:51 McDonaldNAS apache2 [4838]: pam_unix(frontview:account): password expired for user admin (root applied)
  
  31 Dec 14:09:51 McDonaldNAS apache2 [4838]: pam_unix(frontview:account): conversation failed

  You should be able to access the local admin again page now.

  ReadyCLOUD also works now?

• ESXi 4.1 cannot add NFS data store on a Netgear READYnas 1100 (please help)

  I have a Netgear ReadyNAS 1100 NAS

  When I put an NFS share, so I can add a store of data on my ESXi 4.1, I

  use the following instructions in their site: http://www.readynas.com/?p=3030

  Each

  time I try to join the NFS share via the GUI, I get the following

  message: "operation failed, diagnostics report: unable to complete.

  Operation of sysinfo.  Please see the log file VMkernel for more details. »

  I have

  have also tried the SSH console using the command: esxcfg-nas

  -a/share/mynfs s o 10.0.0.10 mynfs and I get the error:

  "Connection to the NAS volume: mynfs.

  Unable to connect to the NAS volume mynfs: unable to complete the operation of Sysinfo. Please see the log file VMkernel for more details. »

  details of the journal of the kernel are:

  August 19-14:37:36 pass: cannot read the header on stream TCP (local = 127.0.0.1:60962, even = 127.0.0.1:0): N7Vmacore15S ystemExceptionE (connection reset by peer)

  August 19 at 14:37:47 pass: PersistAllDvsInfo called

  August 19-14:37:51 pass: airfare to CIMOM version 1.0, root user

  Aug

  19 14:37:59 pass: [2010-08-19 14:37:59.311 2AAA3B90 info "TaskManager"

  opID = 993 D 2353-0000037 C] task created: haTask-ha-host - vim.host.DatastoreSystem.creat eNasDatastore-1124

  August 19 at 14:37:59 pass: 2010-08-19 14:37:59.312 FFFB0B90 info opID = 993 D 2353-0000037 C ' Hostsvc::DatastoreSystem' creating test data store

  August 19 at 14:37:59 pass: AddNasVolume called

  Aug

  19 14:37:59 pass: [2010-08-19 14:37:59.312 talkative FFFB0B90

  "FSVolumeProvider", opID = 993 D 2353-0000037 C] LookupVmfs: could not find VMFS

  volume id & lt; unset & gt; path, & lt; unset & gt; or name test

  August 19

  14:37:59 pass: [2010-08-19 14:37:59.312 talkative FFFB0B90

  "FSVolumeProvider", opID = 993 D 2353-0000037 C] LookupNasByName: could not find

  NasVolume volume test n soul

  August 19 at 14:37:59

  VMkernel: 0:23:10:59.338 cpu0:5299) NFS: 149: command: (Mont) server:

  (10.250.50.93) IP: (10.250.50.93) path: (/ esx) Label: (test) Options:

  (Non                   e)

  August 19 at 14:38:29 vmkernel: 0:23:11:29.669

  CPU2:5299) WARNING: NFS: 946: MOUNT RPCfailed with State CPP 13 (CPP has been

  interrupted due to timeout) try to serve mount r

  (10.250.50.93) path (/ esx)

  August 19 at 14:38:29 vmkernel: 0:23:11:29.669 cpu2:5299) NFS: 160: mounting NFS 10.250.50.93:/esx failed: unable to connect to the NFS server

  August 19 at 14:38:29 vobd: 19 August 14:38:29.727: 83489529043us: http://esx.problem.vmfs.nfs.mount.connect.failed failed to get to the 10.250.50.93 Server mount point /esx. E rror: unable to connect to the NFS server.

  Aug

  19 14:38:29 pass: [2010-08-19 14:38:29.727 FFFB0B90 error

  "FSVolumeProvider", opID = 993 D 2353-0000037 C] mount VmkCtl or ProcessNas

  has failed: operation completeSysinfo impossible.  Please see the VMkernel

  log file for more details.

  August 19 at 14:38:29 pass: [2010-08-19

  14:38:29.727 2AA15B90 'ha-eventmgr' info] event 79: impossible to climb to

  the 10.250.50.93 Server mount point /esx. C cannot

  me onnecter to the NFS server

  August 19 at 14:38:29 pass: [2010-08-19 14:38:29.740

  FFFB0B90 info "App" opID = 993 D 2353-0000037 C] AdapterServer caught

  exception: 2a6fb460

  August 19 at 14:38:29 pass: [2010-08-19 14:38:29.740

  FFFB0B90 info "TaskManager" opID = 993 D 2353-0000037 C] task completed:

  haTask-ha-host - vim.host.DatastoreSystem.cre ateNasDatastore-1124 Status error

  Aug

  19 14:38:29 pass: [2010-08-19 14:38:29.740 info FFFB0B90 "Vmomi"

  opID = 993 D 2353-0000037 C] Activation N5Vmomi10ActivationE:0x2a761010 : invoke made on vim.host.DatastoreSystem:ha - datastoresystem

  August 19 at 14:38:29 pass: Arg spec:

  August 19 at 14:38:29 pass: {(vim.host.NasVolume.Specification)

  August 19 at 14:38:29 pass: dynamicType = & lt; unset & gt;

  August 19 at 14:38:29 pass: remoteHost = "10.250.50.93."

  August 19 at 14:38:29 pass: remotePath = "/ esx"

  August 19 at 14:38:29 pass: localPath = "test."

  August 19 at 14:38:29 pass: mode = "readWrite"

  August 19 at 14:38:29 pass: type = "nfs."

  August 19 at 14:38:29 pass: userName = & lt; unset & gt;

  August 19 at 14:38:29 pass: password = & lt; unset & gt;

  August 19 at 14:38:29 spend :}

  August 19 at 14:38:29 pass: throw vim.fault.PlatformConfigFault

  August 19 at 14:38:29 pass: result:

  August 19 at 14:38:29 pass: {(vim.fault.PlatformConfigFault)

  August 19 at 14:38:29 pass: dynamicType = & lt; unset & gt;

  August 19 at 14:38:29 pass: faultCause = (vmodl. NULL in MethodFault),

  August 19 at 14:38:29 pass: faultMessage = (vmodl. [LocalizableMessage)

  August 19 at 14:38:29 pass: (vmodl. LocalizableMessage) {}

  August 19 at 14:38:29 pass: dynamicType = & lt; unset & gt;

  August 19 at 14:38:29 pass: key = "com.vmware.esx.hostctl.default"

  August 19 at 14:38:29 pass: arg = (vmodl. [KeyAnyValue)

  August 19 at 14:38:29 pass: (vmodl. KeyAnyValue) {}

  August 19 at 14:38:29 pass: dynamicType = & lt; unset & gt;

  August 19 at 14:38:29 pass: key = "reason."

  Aug

  19 14:38:29 pass: value = "could not complete the Sysinfo".

  operation.  Please see the log file VMkernel for more details. «,

  August 19 at 14:38:29 spend :}

  [August 19 at 14:38:29 pass:].

  August 19 at 14:38:29 pass: message = & lt; unset & gt;

  August 19 at 14:38:29 spend :}

  [August 19 at 14:38:29 pass:].

  August 19 at 14:38:29 pass: text = ","

  August 19 at 14:38:29 pass: msg = «»

  August 19 at 14:38:29 spend :}

  Check your DNS on the NFS Datastore server settings.  I had a timeout problem bad w / my NFS server.  We define for OPENDNS temporarily and NFS store popped up immediately.

  Joe

• Server error ReadyNas 104 and plexmedia

  I recently bought this ReadyNas 104 and install the server software Plexmedia. It was working fine.

  Then I got new disks and decided to build a new system.

  When I looked at the app was now lack of Apps, I downloaded plexmediaserver-ros6-binary - annapurna_1.0.3.2461 - 35f0caa_armel.deb

  The following is the error I get when trying to run this application installed. Activation/deactivation of the service then nothing

  very weird but it worked before, any ideas.

  Sven has soon

  The RN104 is not a unit of Annapurna.

  The RN104 uses other armel package. It should have been clear when downloading from plex.tv/downloads

• Monitoring of ReadyNAS on ReadyNAS 104

  IM using a ReadyNAS 104 and want to use to record the flow of our surveillance cameras. Unfortunately application of monitoring ReadyNAS does not supports more of a camera and recording on motion that makes it completely useless for my application. Is it possible to purchase a license to get a record on motion works on a series of 100 ReadyNAS or is it simply not supported?

  A little off topic, but I finally got the camera to record directly on a ReadyNAS share. All I had to do was setting a quota for such action and finally formatting worked. What the camera calls of formatting are actually create some files binary index and a bunch of zero-byte files hivXXXXX.mp4 which then slowly getting filled with video data.

• ReadyNAS 104 unable to boot after power failure

  Hello

  My Readynas 104 unit is in a suspended state. Power blue led continues to blink (for hours) when I restarted after a power failure. The disply screen says "READYNAS 6.4.0" and no button works. I can only remove the power cable and connect back to try again to start, but even once, he ends up in the same State of the Power LED flashes continuously.

  Device answering queries ping but actions / iSCSI and admin page not available.

  Someone of you has faced this kind of problem or can help me solve this problem without losing any data please?

  Thank you

  Hussain

  I want to contact support.

• Different versions of ReadyCloud on ReadyNas 104 6.5.0

  I have two ReadyNAS 104
  Both recently upgraded to 6.5.0

  A while back I accidentally disabled ReadyCloud on the first and then added new - then after that was to connect to the admin Pages using the 'admin' instead of the main user account account. This works even when am so Ok with it.

  Since the upgrade to 6.5.0 - I need to use the account "admin" on both.

  Now, go to the 'Cloud' of these two tab - ReadyCloud option seems to be significantly different on both. Key settings also gived options.

  Not a big issue that I don't use much, but thought I would check why it is.

  Older machine (ReadyCloud disabled + add):

  

  Parameters:

  

  New box:

  

  Parameters:

  

  Thoughts?

  Clear the cache of your web browser, close your web browser and then reopen the web administration interface. The admin web UI should then display correctly with both systems.

• Pass the disk from ReadyNAS 104 again ReadyNAS 104 #26210568

  I just got a replacement from the ReadyNAS 104 factory. I swapped the drives ensuring that I kept the disc # correct. However, when I start the new NAS he don't know the discs. I need to "turn up the volume. However, I fear that will erase the data. Any suggestions on what to do?

  Hello ckovel,

  When you insert the disc on another chassis that is with the same model, you must insert them all to their respective bays before initializing the NAS. NAS should display disks and volume load.

  If this is not the case, one possible reason is the chassis and the disks do not have the same version of firmware.

  You should still be able to get support for it since it is to install the replacement. It is best that you contact the helpdesk to guide you through it. Use the previous case, it can be reopened and increase if necessary.

  Kind regards

• ReadyNAS 104 to 314 #26833764

  Hiya

  I have a readynas 104 with 6 TB drives in there, I want to move to a readynas 314 to be able to use the maximum storage space

  Can I just slide my readers of the 104 in the 314 and not lose my data?

  Thank you

  Looking at your case looks like has already set and the remains to have PHP installed at one time was the problem.

• Windows could not find a certificate to log on netgear47

  I have 2 laptops, Dell is connected and the notbook connects without a problem.  I try to connect this old Vaio pcg - K33 K series and the message above. It comes to XP.

  I hung a cable from the router to the computer and can get online but still can't hang wireless.

  Your information is somewhat distorted, but I guess that what follows:

  'Netgear47' is a model of a Netgear wireless router.

  The error message that you get on the Vaio is similar to "Windows could not find a certificate to connect to the network.

  What version AND service pack of Windows XP is installed on the Vaio (right click my computer and select Properties, if you do not know).

  The most likely problem is that on the Vaio's wireless adapter is misconfigured.  If you use Windows wireless zero configuration (WZC) to configure the card (and not a utility provided by Sony), see the following for directions on how to correct this problem: http://helpdeskgeek.com/how-to/windows-was-unable-to-find-a-certificate-to-log-you-on-to-the-network/

  While you are on the "Wireless network connection properties" screen (in the middle of the 3 images on the site linked), look at the box at the top ('use Windows to configure my wireless network').  If this box is NOT checked, then the fix suggested on the web site may not work and you will need to use the utility Sony to make a similar change. In this case, it may be easier to simply delete the 'profile' of your network in the utility of Sony. When you try to connect after you have deleted the profile, the network must be configured correctly.

• error message: "windows could not find a certificate to connect to the network.

  My NetGear wireless icon shows this error message "windows could not find a certificate to connect to the network.

  Hello

  Did you change your computer before this problem?

  You can follow the procedure in the article.

  Unable to connect to the network: Validation and certificate in Windows XP and Vista errors

  http://KB.NETGEAR.com/app/answers/detail/A_ID/7334/~/unable-to-connect-to-network%3A-validation-and-certificate-errors-in-Windows-XP

  Alternatively, you can contact Netgear support to improve assistance in this regard.

  Welcome to the NETGEAR support

  http://support.NETGEAR.com/

• can not get the wireless network... saying "windows could not find a certificate to log in to a network.

  Hello

  I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp

  Thank you

  Hello

  I tried to connect wireless to my network with a netgear mordem.and saying "windows could not find a certificate to log in to a network" I was using a mordem delink and never had prob.when I call my internet provider as they gave me this new mordem free, is to show that msg.but when I connect by netgear cable is efficient. my windows operating system is windows xp

  Thank you

  Thanks for posting. Follow the instructions below carefully.

  1. Click Start > run > type or paste devmgmt.msc > click Ok or press ENTER.
  2. Scroll down to network adapters. Develop the content by clicking on the symbol +.
  3. Locate your wireless adapter. Right-click on it and choose uninstall. Confirm the prompt.
  4. Restart your computer. Allow Windows to detect the new hardware. The driver and the device needs to be reinstalled automatically the resolution of the problem.

• Try to uninstall Pure Networks Network Magic, platform Assistant works, how can I get rid of it, can not find in my system

  Have left nmrsrc.dll and 2 files nmspce2.dll.  Tried to delete it tells me that they are protected and hidden, do not know how to display them, nothing doesn't show in Add/Remove programs and windows search can not find them.

  PFure networks Platform Wizard keeps saying it has encountered a problem and needs to close, have removed the remaining files, but cannot get rid of these two.  What should do?

  Hello

  To view the files in XP follow these steps:

  a. in desktop screen click Start, then Control Panel, Panel Options.

  b. click on the view tab and check the box "see the hidden files and folders" and press OK.

  c. you will now be able to see all files and folders hidden on your computer. You can do a right click on the hidden folder and uncheck the hidden box and apply the changes to display it.

  See this article on how to uninstall Network magic: http://www.purenetworks.com/support/faq/13.html

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=104&VW=1&articleid=21926

  If you cannot uninstall the program, contact support for Network Magic team.

  Thank you very much for trying to help, find the files I had to remove, they do not delete found files in Mode safe and they deleted properly.  When I cliked show hidden and program files did not see them, Safe Mode works perfectly.  Good job!

• Print server attached to the new network, but do not find add printer printer

  After an upgrade to a new router (a Netgear N600 Wireless Dual Band Router WNDR3400), I spent a LOT of time trying to make everything again to talk with each other.  I've gotten to the point where all the wireless devices PC AND my WPS54GU2 print server are all properly connected (I can log in from another PC print server and print a test page).

  Unfortunately, I was completely unable to add the printer connected to the print server to the same PC that can open a session and ping the print server.  The wizard does not find just any network printer and when I type in the name of the server and printer I get the error message "the server for the printer"Print Server Null driver"doesn't have the printer driver installed."

  What I'm doing wrong here?

  BTW - I wasn't happy that I had to lower the security of the new router WEP wireless, or that it only took the key to SPELL as the paraphrase, but I also noticed that the print server was not a option for the safety of new protocols there was an upgrade of the firmware available.  Are there new print there servers work better with better security protocols?

  Thank you

  Craig

  If the installation wizard is not able to detect the printer connected to your print server. Make sure that the "printer" is correctly plugged into the PS and the Led for the same are lit on the PS.

  Second, you can try to configure a TCP/IP port to make the printer work.

  Start by defining a static IP address on the PS, and then set the TCP/IP port. The same link is given below:

  http://www6.nohold.NET/Cisco2/UKP.aspx?VW=1&docid=bb9993cc2c764dfab25dcb22d8eb0d35_4175.XML&PID=80&r...

  Then, this model does not support the WPA or WPA2 Personal. You can go for WPSM54g that supports both the level of encryption that I mentioned here. See the screenshot below.