capture an image of the android camera

Similar Questions

• Download images via the digital camera. the message on removable disk E saying its now safe to remove the mass storage device

  Cannot download pictures from my digital camera.  I've been able to do recently.  Happened several times, I tried the computer shows small icon at the bottom right it is now safe to remove the removable storage device E.  I recently changed my virus protection providers.  This could be the problem or is it a problem with my computer?

  Hi FrankieLastname,

  Check that the automatic run settings are correct:

  1. Click on the Start orb
  2. Select Control Panel
  3. Select auto play

  You should see the card reader that you use for the Sandisk under devices. Select the action you want to take in the drop-down list.

• Why can't I import my images of the Red camera?

  Whenever I try to import my 5 k red film on first pro I get the same message. Format not supported or damaged. I already downloaded some software on the site of red.

  I don't really know what to do.

  Hello

  I think that the EPIC MYSTERIUM-X files were not supported at the CS6. This version includes support for 5K EPIC of RED and RED footage

  SCARLET-X cameras.

  If you want to use try first Pro CC test and check.

  http://www.Adobe.com/content/dam/Adobe/en/products/premiere/CS6/PDFs/Adobe-Premiere-Pro-CS 6-red - workflowguide.pdf

  Vinay

• Still valid to use FileJournalListener to capture the image of the camera in 6.0?

  I'm having a problem with a screenshot of the app native camera on JDE 6.0 and the 9800 Simulator.  I use the old 'good practices' referring to the native camera app and save a FileSystemJournalListener:

  {Synchronized (UiApplication.getEventLock ())}
  UiApplication.getUiApplication () .addFileSystemJournalListener (this);
  Invoke.invokeApplication (Invoke.APP_TYPE_CAMERA, new CameraArguments());
  }

  When I get a FileSystemJournalEntry.FILE_ADDED, I get the file and encode it.

  Public Sub fileJournalChanged()
  {
  next sequence number file system will use
  Long USN = FileSystemJournal.getNextUSN ();
          
  for (long I = USN - 1; i > = lastUSN & I)< usn;="">
  {
  Entry FileSystemJournalEntry = FileSystemJournal.getEntry (i);
  If (input == null)
  {
  break;
  }
              
  If (entry.getEvent () is FileSystemJournalEntry.FILE_ADDED)
  {
  Path String = entry.getPath ();
  If (path! = null & path.indexOf ('.jpg')! = - 1).
  {
  We found a new JPEG image, treat it
  String result = processImage ("file://" + path);
                      
  clean
  closeCamera();
                      
  break;
  }
  }
  }
          
  do not forget the change log file number,
  If we do not find the same events over and over again
  lastUSN = USN;
  }

  The problem is that the Torch 9800 Simulator choke on it.  "I get randomly ' JVM error 104: Eception: OutOfMemoryError.  I say randomly because sometimes after taking pictures of 3-5 successfully, and sometimes it pours on the first attempt to photograph.  I've cleaned many times Simulator.

  The same code works perfectly in 5.0 simulators (9550, 9530).  I can take pictures until I'm blue in the face without an exception OutOfMemoryError.

  I saw this method of capture an image (using the MMAPI implementation)...

  Take a photo in an application device of BlackBerry - Multimedia - Development Guide - BlackBerry Java...

  .. .but I want the user to be able to have the user of the native camera of experience.  Therefore, listen to JPG file was added.  Is it still valid in 6.0?  It is, of course, to some extent, or my photo app would not work.  Is there something with log being numbered differently?

  The FileSystemJournalListener is not the problem.

  The exception OutOfMemoryError seems to be related sending images of native Java coding to JavaScript.

  Only one problem in 6.0.

• SICK Ranger camera Toolkit - can not see the Image on the flag

  Hey,.

  I understand the toolkit SICK Ranger camera is not supported by OR and is a 3rd party toolkit, but I wonder if anyone has used the Toolbox to create their own applications with a SICK Ranger camera?

  I have trouble integrating functions of the box tools to simply capture an image of the camera. "I ran the examples on the finder of the example, and they return a 400226 error code: Framegrabber is empty and the wait has expired (due to timeout or external alarm).

  So, I have developed a very simple VI, which still doesn't get enough. I get all the status of the camera and information on the camera so I know that the connection is established, but for the indicator of the image, it is empty. Anyone had this problem before? When I keep the indicator image as an indicator of I/O, it displays the name of the image. But when I replace it with a display of the image, it does not display anything.

  I thought you can with a palette display type, but I've tried all of them, resulting in a vacuum gauge.

  In this picture, you can see indicator of the IO Image shows there is a reference to image

  Same indicator, just replace the indicator image of I/O with a display of the Image of the Vision, and run the code... nothing appears?

  I have attached the reference code.

  Thank you

  Hans T

  Hi Ed,

  There was an error in the Ranger Studio regarding loss of data packets. I soon discovered that in order for the compliant to GigE cameras, a periodic broadcast is sent by NOR-IMAQdx for a response for the automatic detection of GigE cameras (including gaves me a Max error strangely...). I went to the registry editor and turned the broadcast, e-mail, that solved the problem then. It seems that I lost data packets over ethernet through periodic broadcasting of NOR-IMAQdx, which halted the sending of data packets from the image. I've also updated affecting patients, for example tidy Studio etc... (including the API) to the 5.1 version that works very well.

  The MAX IMAQdx error has been resolved with your colleague as a SR as a separate issue.

  Thanks for all the help - you are the best!

• Why deletion of images of iPhone 4, iOS 7.1.2 with Capture of Image does not work?

  Using the key delete does not work and selecting 'Remove' in the edition menu is grayed out.

  Hi Varoop13,

  Thank you for using communities Support from Apple! I'm sorry to hear that you're having these problems with your iPhone and Capture of Image. I'm a little unclear on exactly which version of Mac OS X you are using or what you see in the Image Capture, but you may want to look for a button with a circle-slash () icon; It's recent releases how Capture of image mark the delete key. It will be active when one or more images have been selected. It is also a behavior whereas the keyboard delete key will not remove the images selected, and that the delete option under the Edit menu stay grayed out. You can see some of these options, it is stated in the following article:

  Use the buttons at the bottom of the window to Capture of Image to display thumbnails in a list () or to display larger thumbnails (), or to rotate () or delete () images.

  Transfer pictures - Image Capture help

  Concerning

• How to capture still images of PP2 for Photoshop

  Hello

  Please can someone tell me how to capture still images from the video sequence in PP2 in a format that can be used in Photoshop? They must be especially high resolution. I use them as a basis for the DVD images when I didn't get pictures.

  I use other methods for it and hit a problem with that. I could be wrong, but seem to remember to do in the past with PP1.5 via the capture window! Like I said it could be my memory playing tricks with this one.

  Thank you for reading this and I would appreciate any help

  Graham

  Structure of file - export. Don't not whose format choose you they can all be modified in Photoshop.

• Loading images from the camera to the Finder

  How can I load pictures from my camera directly into a folder I made on Finder?  I don't want to go through the program Foto everything first because then the photos arrive in a place that is impossible to find and manage.

  Use the Apple Image Capture app.

  Image capture: transfer images and other elements of your device

• Image capture does not load the thumbnails of all the photos detected

  MacBook Pro (retina, 15 inches, end of 2013), 2.6 GHz Intel Core i7, 16 GB 1600 MHz DDR3,

  iPhone 6 s, iOS 9.0.2

  OSX using 10.11.5, running the Image Capture

  Connecting iPhone and started the image capture.

  Capturing images don't load picture thumbnails.

  Left the application here to give time for it to load, but still the same

  Exit and restart Capture of Image, some of the miniatures that failed to load previously managed to load, but a lot are all still not loaded.

  Exit and relaunch Image Capture, some of vignettes that has not charged the 1st time and instructed the 2nd time, failed to load now. seems to be back to square 1.

  Its a hit and Miss sort of thing.

  This has been hard for some time already, can't remember how far behind you.

  Any advice would be greatly appreciated.

  Thank you.

  Hey there, at0m87!

  Thank you for using communities Support from Apple. I understand from the information you provided, when you connect your iPhone and open picture Capture, there are missing thumbnails. I manage my own photos on my Mac, so I can understand wanting and needing these thumbnails to display correctly. I have a few things you can try to help him.

  1. Eject your iPhone from the computer and stop Capture of Image. Press in and hold the SHIFT key on your keyboard while reopening of Capture of Image again. Connect your iPhone and the test of the miniatures.
  2. Restart your Mac. Stop the Image Capture, eject your iPhone from the computer, and then click the menu  Apple in the upper left corner of your screen. In the menu, choose "restart". When you start the computer, open picture Capture and connect your iPhone. Test the thumbnails.
  3. Look for updates on Mac and your iPhone.

     The following article will help to check and install updates for your Mac.

     Update the software on your Mac

     The following article will help you to check and install updates for your iPhone.

     Update the software on your iPhone, iPad or iPod touch iOS

  4. Check Image Capture thumbnails in safe mode. Eject your iPhone from the computer, and then follow the steps outlined in the article below the link to start in safe mode

     Try safe mode if your Mac does not end commissioning

     Even if the title of the article is not specific to your question, safe mode is always a good step to take. It performs several checks of your system during the boot process, and disables some software that could cause a conflict.

  5. Try the Image Capture in a new user account. The article in the link below will give you instructions on the implementation of a new account, as well as some information as to why this may be useful.

     How to test a question in another account on your Mac.

  Have a great day!

• the automatic check after the pulse camera image

  Dear Sir.

  I made a request to acquire a picture after an external trigger (from the light source) and after a short delay (1ms)

  I use the Point of the camera gray grasshopper3 gs3-u3-51s5m.

  The problem is I want to save my images in a folder called 'Images' with the name ' automatically test 0 "and if it exists already name it" Test 1 "and so on... '".

  But can't really find a way to do it.

  Hope you can help out me.

  Thank you very much!

  Chen.

  I forgot about the extension of the new... Apology.

  Here's who should work. I replaced the game model vi with the channel scan. Error compensation is where there are files of othter, which does not meet the model schema

• medium-sized images of the camera with IMAQdx

  Hello

  I need through the images acquisition of a camera and subtract the average of an acquisition of background image.

  Although I use an ethernet connection, the program is REALLY slow.

  I'm new with Labview so any suggestions is very welcome... I have attached the program

  This is not my best work, but take a look a this.  The same code acquires the two images, you just choose what image control stores the updated average image.  the Analyze button then processes what is in control of the two images (reference and absolute).

  Your problem is that you initialize constantly every time as an image.  Just do it once.

• Restore the Image of the camera target in VBAI

  I use Vision Builder AI 2012 with Smart camera NI1772C.  I can create target camera Image (Menu > target > create a target Image) but is it possible to restore the image on the camera?  The image is similar to PC save the image that can be safely stored and restored in case of emergency?

  Once you have created the image of the target, you can update any target of similar model with this image. VBAI launch and the start screen, select the target to update and do a right-click on the target and select "configure." On the last step of the configuration, you can navigate to the zip file that contains the image that you did to restore the target with all the image files.

  Hope that helps,

  Brad

• Problem reading video image from the camera IP Axis - confusion of variant data buffer.

  Hi there;

  I am writing a VI for an Axis IP camera.  He went to work, but I need to extract individual video stream images so I can overlay text using the functions of text IMAQ overlay.

  The thing is when I take a picture using the axis dll library (GetCurrentFrame), it returns a buffer size and a Variant representing the raster data.  The data is = 921 640 bytes representing a 40 byte header, and then the 640 x 480 x 3 raster data.  When I run the vi, I get a correct value for the size of the buffer (921 640) so I know it works.

  What don't understand me, it's the video image is placed in a buffer of type variant.   I don't quite know how to extract the raster data of the data type of "buffer" which is a type variant.  My apologies, I'm a bit ignorant in how to handle the types of "Variant".

  Does anyone have a suggestion?

  This is the VI

  Hi Peter,.

  Just to confirm, what IMAQdx version do you use?  You want to get the version 2010.3 since it is the latest version: http://joule.ni.com/nidu/cds/view/p/id/1641/lang/en

  The next issue would be that the Ethernet cameras discover is not necessary and that it is only used for GigE Vision cameras. The VI was named before IP camera support has been added and the name is unfortunately confusing now. In any case, the discovery of cameras takes place in the background and is automatic. The VI list must list your camera. It may be worth trying just to see if the camera appears in first MAX. Note that the IP camera must be installed on your local subnet, so it can be discovered.

  Regarding the examples, virtually none of the IMAQdx examples included in help-> find examples should work.

  Eric

• Image from the camera as local variable

  Hey,.

  I'm looking to use the same image reference for each of my camera inspections. I take a picture at the beginning of my test that I call this camera image1, then I have several inspections test, however, my camera1 image is empty for the 5 first steps but displays a picture of 3 steps then gives a blank image in the end I created a local variable of the reference image. Any useful suggestions. Thank you.

  Damien

  Hey,.

  Thank you for the interest that I have resolved the problem, reson why the image doesn't seem to my wizard output vision express VI was because I never restored the original image. Thanks again.

  Damien

• Screenshot or image of the camera in front panel

  Im trying to take a snapshot of a CCD image in my front panel every time my program iterates. CCD image is updated of my camera which is connected online. Ideally, I want just to save an image in .jpg of this image of the camera of each iteration, but I can't do with the invoke node option. Any ideas?

  Is attached a screenshot of the front part, let me know if you need the real VI

  Hi Manderson13,

  Norbert is absolutely right that you can record images using the NI Vision software. What kind of camera you have, and how you currently gain to display images on your front? Documentation on how that here you can use our vision software to record images to the file.

  Thank you!