Capture TV programs via the cable using the cable box and card Hauppauge
I was doing fine record TV unencripted signal until comcast sent me a box of small encriptación. I have no problem with the help of the box to see the TV programs on a TV, but I can't get the Huappauge card to recognize the signal from the comcast box. I recognize the signal (without going through the box) an antenna that I decked out, but I can't work with the IR signal from the box that changes channels. I have the cable extension IR remote with comcast box and also have an extension remote IR provided with the computer/hauppauge card. It doesn't seem to be an outlet on the map, but there are three locations on the computer that are identified as IR Device Manager lists a Hauppauge Comsumer s infrared receiver and an infrared transceiver Microsoft e-Home installed without any indication of error.
How can I get all those guys to play as a team, so I can schedule recording of TV programs again?
CheckSix
Photoray002;
The Hauppauge WinTV HVR-1290 sends finally channel change commands TV Comcast decoder box and it is now possible to program the recorder. I think that the main problems were a failure remote control Hauppauge and a very low external receiver. It could also have been a few taken IR on the computer that could have internal corrosion of three years of inactivity.
I found two sites that have helped significantly:
http://support.HP.com/us-en/document/c01744910
This site showed that the jury of IR extension on the back of the computer could be one of two different configurations - with and without electronics on the expansion card. He had to open the case to determine where the design has been installed. Mine was no electronics, but the indications I had followed guess an electronic sign.
http://www.Hauppauge.com/site/support/support_faq_irblaster.html
This site goes into detail about the implementation of the system using a set-top box. I couldn't always installation to work because the statement strongly relied on the Hauppauge remote control. But I noticed in the comments to the screen, another way to use the keyboard rather than the Hauppauge remote control. Better easier to identify the box system is the first option. The program will redirect you to point the remote very close to Comcast (touch) to the external IR receiver and press a particular key. If the receiver receives the signal, it will be a very small red light flashes in the receiver. You may need to move the remote to the receiver to get this light. Once the box is identified the process of implementation of the signal is simple although there will be a lot of channels identified. You can uncheck the channels that you don't want or you can deselect all channels and the select only the channels you want.
Thank you for your help. He made me go in the right direction.
CheckSix
Tags: HP Desktops
Similar Questions
-
my computer wants to open all my programs via the adobe reader software does not open
yesterday while trying to open a file, I was offered to open it with adobe, it didn't open, but now he's trying to open all my installeed with adobe programs how can I stop this?
yesterday while trying to open a file, I was offered to open it with adobe, it didn't open, but now he's trying to open all my installeed with adobe programs how can I stop this?
I've seen this happen when opening a program via a shortcut (for example. LNK file), you are asked what type of program to open it with. After selecting Adobe Reader or Acrobat (or another program) via the Select a program from a list of programs installedand check always use the selected program to open this type of file, the program referenced by the shortcut of origin or document opens in Adobe as it should.
The problem is that now all shortcuts (for example. LNK files) on the desktop or in the browser will want to use the Adobe Reader to view the shortcut no matter what shortcut was initially intended to open and be opened by Adobe Reader. This is known as a file association and the default icon. The same condition can occur if you have performed these actions 'Open with' on one. JPG or even a. EXE, but the. LNK explanation is much more likely for the items on the desktop.
The good news is that a small free utility was written to cancel the. LNK file association was created. There is also a registry hack to achieve, but I recommend the utility unASSOC for its ease of use.
You can get a copy of my SkyDrive here. I used to send people elsewhere to download a copy, but this page is more confusion with misleading ads to download this and that.
Just download and then run the utility to unassociate the. LNK files. Select. LNK in the list on the left and click on remove the associated file (user) or remove the file type , and then restart the computer.
-
I need to transfer the Creative Suite 6 from an old computer to a new one. I have a disc. Just disable the program on the old computer and install on the new and then save Will Adobe recognizes that I have only used a copy? I need to also install the program on a laptop.
You can use the serial number twice, Learn how to enable or disable Adobe applications
Concerning
Stéphane
-
I lost my programs in the start menu and desktop
Original title: Lost programs
in some ways, I lost my programs in the start menu and on the desktop.
He says: program has been changed or moved
This may work incorrectly or not work.can someone offer me solutions
Hello
Thanks for the reply.
Please let us know if the problem persists in the new user account.
-
Hello!
A few weeks, I just change my signature to email hotmail via the menu options, and since then, a big grey box appears on the emails that extends from left to right and is also important. I went into the signing options, re-created the signature, and for 3 weeks completely removed the signature, but I always get the grey box display. Email being accessible via www.hotmail.com, and I don't have the problem, when I answer emails via my iPad2.
Any help will be greatly appreciated, so that e-mail can be sent to the search normally. Thank you!
Hi Paul,.
The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the support you want.
http://windowslivehelp.com/product.aspx?ProductID=2 -
Win 8 (Pro) - Questions on program files, the desktop icon and taskbar
Hello
I just upgraded successfully Win 7 (home) to Win 8 (Pro).
I have a few questions in mind:
Q1: A program icon can be PIN to the taskbar and desktop at the same time?
Q2: Under Win 7, user can easily see all installed programs by clicking on all programs in the Start Menu and select no matter what and copy and paste it on the desktop or PIN to the taskbar task, but under Win 8, I could not find this feature. CAB user to access the program to install all at the same time? Or the user needs to type the name of the program to the search box one by one? How to pin it in the Start Menu Win 8 on the desktop instead?
Appreciate someone could help me in this area.
Thank you
First question: Yes, of course. You can place an icon where you want. Desktop, taskbar, start screen, at the same time.
Second Question:
The start of Windows 8 has a screen view "all programs" similar to the former in Windows 7 (except the new is full screen). To get her on Windows 8, right click on an empty spot. If you have Windows 8.1 update, which makes it easier to find by putting an arrow at the bottom of the main screen.
To take an icon from the start menu or the list of applications and put them on your desktop, right click, choose "Open file location" and then copy / paste the icon on the desktop.
-
One of the pages of my site moves to the right when using anchors to scroll. I checked for Ghost off the page boxes and checked that all my 100% width images are actually 100%. I discovered that this problem is chrome and does not happen in Firefox. Any suggestions?
Thank you Brad, my ankles were lined up however they were in the Center. I am proposing to-100 and it solved the problem. Thanks for your help.
-
I have all the Adobe Creative Suite with all the programs installed on my mac, I bought a new mac and go to sell the need for others, but I have to get the programs on the new computer and I also lost the serial number for it, what can I do about it?
-
The Central handle on the rectangle isn't gone when I select with the black arrow (v) tool. See the bounding box and the edges is both. Dd intermediate anchor to go?
haggyabeken,
I'm afraid that you have come across the Rectangle Live bug, which is limited to MAC versions starting from 10.7 and 10.8, but not 10.9 (Mavericks), see this thread linked below.
https://forums.Adobe.com/thread/1595973
Thus, a switch for the Mavericks with a reinstall might be the way to solve it here and now.
To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool.
A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:
-
Letters in boots upwards in the text boxes and captions
Hello
I was working on a pdf file in Acrobat 8.1.4 Standard and I made the text boxes and legends throughout this document, but recently it has begun to overwrite the text. When I open another pdf file and start making notes, there is no problem.
I can't upload a sample of this document because it is a Government document and there are permissions, but like I said I did my annotations and recently he started to arrive.
Help, please.
Thanks in advance.
I found this on my own. It seems that the embeded font was corruptted so I just use a different font for text boxes and all is good.
-
A4: The Click Box and feature button
Hello
I am creating a slide of summary in a project of capitvate users will consider before taking a quiz. I would like this slide contains hyperlinks on various documents. I want users to have and an unlimited number of time to look these over, and then click all they are interested in and then click a button to continue the quiz.
No matter what options I put the click box, the project will continue for the quiz when a user clicks one of the hyperlinks!
Here is an example of this tutorial (just the blade of the review and the first quiz slide): https://mywebspace.wisc.edu/lfschmidli/Captivate/sample.swf
And here are the settings I have for hyperlinks and the click box and the button:
Hyperlinks (ie: "of the INDEX Module 3'): https://mywebspace.wisc.edu/lfschmidli/Captivate/hyperlink.PNG
Click box (which is transparent and sits on top of the button "Take the Quiz"): https://mywebspace.wisc.edu/lfschmidli/Captivate/clickbox_takethequiz.PNG
Button "Take the Quiz": https://mywebspace.wisc.edu/lfschmidli/Captivate/button_takethequiz.PNG
I would be grateful all solutions! It drives me crazy!
Thank you
Laura
Hi Laura
From what I have seen that you have specifically selected off the options to pause the movie until the user clicks. So now you're stuck as to why the film is not a break.
Try to activate the option to pause. You can also view the page on the link below: more precisely point 13.
See you soon... Rick
Useful and practical links
Captivate wish form/Bug report form
-
I can't bid on firefox or explorer. I place the cursor in the quote box, and it will not only record the numbers. Can anyone help please thanks
Problem solved. My husband came and noticed that the number lock has been deactivated. I can't thank you enough for your help. Hope my solution helps someone else with the same problem.
-
Resize the search box and address box Win7
Resize the address bar and the search box in Windows Explorer in Windows 7. I have the double arrow to resize, but nothing happens when I drag it. I tried to unlock the toolbars, but this does not change the action. My address is 1/4 the size of the search box and the strange looks.
Set your DPI up to 185, I set mine at 185 and the issue went away. anything between 185-200 and the problem comes back.
185 is an acceptable DPI, just a workaround solution.
and a little faster than a SFC installation or repair, which solves the problem.
-
I want to change the size and color of the text in the call boxes and text boxes. How can I do this? Jack
Highlite the text inside the text box and press Ctrl + E.
-
Why my Illustrator images become thicker strokes when I take the bounding box and make it smaller? It never happened to me. I'm not an expert in Illustrator, but I do know some basic principles.
In the preferences, is the scale strokes and effects verified?
Maybe you are looking for
-
Cannot configure synchronization of calendar with exchange
Hello. I use my palm pixi to receive emails from my exchange online server. However, when I try to put in place the same exchange server to synchronize with my calendar on my phone, it won't let me. I get an error saying "an account using this e-mail
-
Necessary recovery for Satellite P300 (PSPC4E) disk
Hello My dogs eat my laptop my Toshiba Satalite P300 (PSPC4E) computer recoverydisk.I have the data partition on my drive on the D: drive.Can pick up from my D drive, or if anyone can download a recovery disc?If you help me and load the disc, please
-
Need drivers Windows XP for Satellite A200 - 19L (PSAEC)
Can someone help me to findout a valid link to download all the drivers for my laptop SATELLITE A200 - 19L.Its preloaded with windows vista and I need to change it to windows xp.I can't findout even those of the toshiba Web site.So can u? Any help wo
-
Dear Experts, I have a computer that is running windows server 2003 on this subject. We are facing a problem, the machine automatically take sleep long and after a while takes over again in normal mode. The time between taking into hibernation mode a
-
His stuttering each time playback is stopped.
Whenever I have stop any program this time audio/video, the sound stutters for several seconds. It seems as if he's stuck in a feedback loop. I've updated the Vista drivers for my sound card and it does not solve the issue. I am running Vista Home Ba