Card in the card reader - how to remove?

Similar Questions

• I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have just re installed Windows XP. Windows installed after three attempts. When I turn on the computer there are three choices of Windows XP. Only the first works how to remove the other two?

  I have a hard drive. At least two partitions. C: 74.7 GB with 63.3 freespace
  D: 74.2 GB with 70.6 freespace
  These are my original specifications of the hard drive: 160 GB (7200 RPM) SERIAL ATA HARD DRIVE WI
  So I suspect there are at least one or more partitions hidden leaving 11.1 GB for hidden partitions!
  Windows is present on both drives C: & D:. In the directory windows on C:, the oldest entry is 19.12.12, 21.43 last 21.12.12, 22.50
  The first entry in the directory windows on D: is 19.12.12, 18.42 the last 21.12.12, 22.40
  I hope that makes sense to someone, any help gratefully received!

  As long as you have verified you dΘmarrez done on the c: / partition, Yes, you can reformat the drive D: / partition using Windows 'disk management '.

  J W Stuart: http://www.pagestart.com

• Accidentally deleted card reader, how to restore?

  Hello, I tried to "eject" safe my sd card in the reader and I accidentally selected "remove hardware safely".  Now my computer won't see or recognize the H, I, J or K readers (who have been readers of card reader).  They just do not appear at all in exploring or in My Documents.  I tried to insert a different SD card (with a few pictures on this subject), and he couldn't find it.
  I have a desktop Dell with Windows XP Media Edition.  Any ideas how I can restore my card reader?

  Thank you!
  Hello.

  Judd is right - wrong forum.

  However, a simple reboot should fix it.
  If it isn't, then you should re-post in the XP community, as Judd has suggested.

  (Sorry, Judd)

  HTH,
  Chris [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Reset the fingerprint reader after you remove all the prints/pw does not

  Yes Im a fool, but is anyone know how to reset the reader of fingerprints for U200-115. I deleted my fingerprints after reviewing the password but now can't get to do something that the password does not work. I was informed that a BIOS password reset is the only way (i.e., a visit to the people service Tosh).

  Does anyone know a work around?

  Unfortunately there is no work around. The BIOS password can be removed by only authorized service provider. I really don't understand why the password still exists but ASP is your last chance.

  The closest contact with ASP and they will do it for you. If you need addresses and phone numbers please visit http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  Good bye

• Threat found using Avast, Win32: Trojan-gen, moved to the chest, but how to remove it?

  I use Avast free version for my anti-virus software.  This morning I did a full scan and it came back with 1 found threat: Win32: Trojan-gen.  He asked me what I would like to take.  At first I chose it remove but I get an error message saying that action was not executed.  I chose and then move to the chest.  This action was confirmed.  That move "chest" means?  East - identical to a virus threat?  I have to do something more?  TIA

  Sandee

  Hello

  Move to the chest means he has been quarantined and, consequently, nuetralized. You can either leave it there, delete it,
  or if it was a false positive, then you can restore it back to where it was.

  For more information on Avast, please check these sources.

  Avast - Support
  http://www.avast.com/support

  Avast - Forums
  http://Forum.avast.com/

  ===========

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

• Prime Minister 9. I made a mistake when I did drag an audio file in the line of the image. How to remove the audio file. I tried ctrl z and shift delete nothing done.

  Using Adobe Elements 9 first, I made a mistake when I did drag an audio file in the line of the image.

  How can I delete this audio file? I tried ctrl z and shift delete. software has the ' delete the scene and all of the properties in gray. Just "delete scene only" it and it does nothing to remove the audio file.  I had to drag the line from the soundtrack.

  Who can help me?

  LinFos04

  What you wrote, it seems that you are in the scene of Premiere Elements 9.0/9.0.1 workspace.

  Please see screenshot showing you how to remove the audio immediately after you dragged in the film that had been marked "Drag the next clip here"

  

  Moving forward consider working in the workspace of timeline that gives you a better view of what is happening and therefore gives you more control over the flow of work. Please click chronology to watch how this audio present in the workspace of chronology after what you did in the space of the stage line.

  Please let us know if it worked to get rid of the audio unwanted in the Premiere Elements 9.0/9.0.1 workspace sceneline.

  For any question or need more information on the above, please ask.

  Thank you.

  RTA

• The "maps" APP, how to remove blue highlight on the satellite, 10.11.3 image?

  How remove blue highlight image on satellite image "cards"? El Capitan 10.11.3 running

  Open system preferences > Security & Privacy - Privacy tab uncheck Services card slots. However, it is global. He died in all views.

• Change the orientation of the mouse. Click the apple icon, and then select check box on the left. However, this box is covered by a video on the use of the mouse. How to remove the video?

  Change the orientation of the mouse.  Click the apple icon. System Preferences; OK to this point; the area to select 'Left hand' is covered by a video on the use of mouse clicks. How can I remove the video (s) so I can't select 'Left hand' in the box?

  System Preferences > mouse, and then select the tab more moves.

  Then on the left, select: slide between pages

  Click scroll left or right with one finger , and then make your choice.

  You cannot delete the video. This is a demonstration.

• I added a photo to theme to the window of the browser. How to remove?

  I added a picture to my Firefox browser window but am unhappy and now wish to remove it

  To change the theme, please read this use themes to change the appearance of Firefox

• I have an iphone of my sister and I managed to create my Apple Id and password but how do I delete my ister apple Id and password on the iphone and how to remove icloud address and password so that I can create my own?

  I had an iphone to my sister and have successfully created an apple Id and password. I want to remove their icloud password to create my own. How?

  Go to settings > iCloud and click 'Sign out' or 'Remove account' as appropriate. If you are asked for his ID and password that you need to ask what they are in order to move forward, or make him do the disconnection for you, or you can also ask him to remove iCloud in his list of devices - please see the http://support.apple.com/kb/ts4515 .

• the mail application, how to remove outgoing?

  I have a jammed mail out of the mailbox, e-mail surface approx. cannot remove it, and there too large attachment. Now don't send any mail. How do you remove coming out?

  One option that you have is to uninstall the application Mail, and then reinstall it from store.

  From the home screen, touch the Mail app tile for a few seconds and swipe down slightly (or right-click on the Mail tile application). This puts a check mark on the tile, and a bar appears at the bottom of the screen with an uninstall option.

  Once uninstalled, you can return to the store and reinstall. You need to configure back again with your "webmail".

• Windows 8 store listing Multiple PCs with the same name - how to remove?

  Hi there... when I go to the store in Windows 8, in my account settings, I see four listed computers.  Two of them are named similarly (I reinstalled Windows 8 a few weeks after I had first and kept my the same PC name).

  I would like to remove one of the PC that has a duplicate name, but I don't know that one to remove.  Y at - it an easy way to see what is the PC I'm on right now, and what is the old PC?  I'm paranoid that to remove that incorrect it will cause my apps on this PC to stop working.

  Thank you!

  In fact, I just understand how do.  Here's what worked for me:

  • Rename your computer from the desktop.  Right click on my computer > properties > etc.
  • You will need to reboot for the change to take effect.
  • Now, go to the Windows store and download an application.  Any application.  It may be a free, or one that you have already purchased.  Is not serious.
  • Once the download is complete, you can return to your account in Store, and you'll see your list of computers is updated with your newly renamed computer.
  • You can now delete the duplicate computer registration.
  • Once it is removed, follow the steps above to rename your computer in its original name.

  It seems that you must actively download an app from the store in order to force it to update the list of the PCs in your bank account settings.

• The loops at the beginning reading: how to stop?

  I work far in PP CS6 and a little thing has slowly turned into a major annoyance today:

  I am building my sequence one at a time and when I play back the last Cup to check, playback on the timeline it will sometimes make a loop to first shot of the show, so I have to stop reading and click 'Finish' to retrieve my indicator from current position to the end of the timeline where it should be. It is not all the time, just sometimes, and it's driving me batsh * t crazy.

  Has anyone else has seen this, and if so, please, for the love of all that is holy, tell me how do to stop this behavior.

  Chris Conlee

  Mac Pro (4.1)

  OS X 10.7.4

  24 GB RAM

  nVidia GTX 285 (CUDA 4.2.10)

  Two monitors

  Mini Matrox Max

  PP 6.0.1

  Chris,

  That's what happens with zero entry of you?

  The reason I ask this is that many users have tried to hit the SPACEBAR to stop playback, but is a little late, and then the space bar started playing 00; 00; 00; 00.

  Good luck

  Hunt

• Video Downloader Toolbar appeared on the Firefox browser, how to remove

  This toolbar has a bing search engine & released unwantedly between google and Norton toolbar on my Firefox browser... I don't know how he got here and this is not wanted, how did this happen, and how can I get rid of it... Yours sincerely liamo777

  You have the add-on screenshot Pimp installed?

• Remove the folders of Windows Photo Gallery, the titles remain, how to remove?

  Delete several files of Windows Photo Gallery, their titles, however, remain.  How to eliminate unwanted titles?

  No guarantee... but if you try to clean
  and again... the following info may be useful:

  Vista Database photo gallery...

  The 'Pictures.pd4' database includes thumbs
  and metadata and is located at the following location.

  (depending on your version of Windows Photo Gallery
  the database could be Pictures.pd4 or pd5 pd6.)

  C:\Users\[username]\AppData\Local\Microsoft\
  Windows Photo Gallery\Pictures.pd4 or pd5 pd6

  The database is a file... you will need to
  Change the following setting:

  Reach... Control Panel / folder Options / View tab.
  ... To check "Show the hidden files and folders" / apply / OK.

  The file ends with a advanced
  Search for pd4 pd5 and pd6.

  Reach... Start / Search / Advanced search.

  Check the box... "include not indexed, hidden and"
  system files' Enter pd4 pd5 or pd6 in the name field

  Renaming or deleting the .pd4, pd5 or pd6 file should
  clean your library.

  The next time that the Gallery is launched, it will create
  a new database file and the gallery will appear as
  He did the first time you have ever opened.

  The gallery must fill in again and some tags
  and metadata can be lost.

  Try to rename it...           Pictures.OLD
  If you are not satisfied with the results... you can try
  change to Pictures.pd4 or pd5 pd6.