Card SD and the magnets?

Similar Questions

• Card SD and the problem of touch.

  I just got my Hp 7 more 1301
  The problem im having is
  1. half top of the screen is sometimes is not responding or at other times, there are some keys at random. It is not wprking properly.
  2 when I put my card in there, it stucks, there is no system of jurisdiction not out, I had to use a paperclip, put it in the small area on the side of the sd card and pull out it. (The Tablet reads the card very well)
  
  Need urgent help! What I'm doing.

  Hello and welcome to the HP support community.

  It looks like your Tablet may have hardware problems.  If you can exchange it with your seller, who could be your best bet.  An alternative is to contact HP for warranty issues.  This link will take you to the page contact HP worldwide:
  
  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  Good luck, hope this helps.

• Error: "Hardware accelerator is disabled or not supported by your video make sure card driver you that you have the latest video card driver installed and the accelerator is running.

  Original title: Solitaire stop working right after the update to download

  This slowed the game.  I checked the video card is correct, and hardware accelerator says it's working properly.  This started after I downloaded two optional updates, one of them KB968930.  I uninstalled both of them and tried to restore the system with no result. the rest of the message is "Hardware accelerator is disabled rooms or not supported by your video make sure card driver that you install the latest video card driver and the accelerator is turned on."  I checked these things.

  Thanks for the help.  I had fixed to date through the tool and the info of the performance.  Find where it says new hardware installed, click on repair, I did and it worked.  I don't know what caused the problem, but my game index had fallen to 1 and came back up to 3.3.  Thanks for the help. P. W. O'Malley

• How can I stop and then resume when you use the magnetic Lasso tool?

  CS4 on Mac. I have some fairly complicated selections to make and the magnetic lasso tool seems a good choice. However: How can I stop and then resume when in use? For example, I would like to zoom, start by dragging along the edge, then stop, move the image to a different area of it is in the middle of my screen, then pick up again where I left.

  Hi MarieMeyer,

  You can press the SPACEBAR shortcut to activate the hand tool temporarily once you are finished with the selection on a part of the image.

  Then, move the image with the key space key and let it continue with the selection by using the magnetic lasso tool.

  You can use the SHIFT key to add to the selection by using the magnetic lasso tool.

  Kind regards

  Claes

• External Usb Audio Card Popping and cracking sound with Satellite L500

  Greetings,

  My name is Boyan and I am from Bulgaria, and a year ago, I bought a laptop satellite l500 series (I can't tell which is exactly the model at the moment because my computer is not currently with me and my user manual, the only thing that is said is that it is for L505/L500/L500D / L505D.) But from memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal, because I gave him for repairs for the same problem that I say down below)

  The problem with my laptop, is that when I plug in a Usb Audio card in my laptop I have a crackling sound during live sound is played hollow map external speakers/headphones. I tried several sound cards and speakers/headpohnes which work perfectly well with other computers, including laptops, but the problem continues even when I use an external sound card to connect to the laptop not appearing in my laptop speakers/headphones.

  The problem is important only when the signal passes through an external audio card and it is very disruptive since I use my laptop to create music and I bought a sound card expenssive and speakers that can not be used with the laptop. I tried 3 types of sound cards:

  M-Audio Fast Track Pro

  BEHRINGER uca 222

  and a simple 3d audio usb audio card external and the problem persists.

  At first, I thought that the problem is software and I should install the new drivers, windows 7 automatically recognizes and installs the drivers for the devices and I have its in (but with the cracks and educated) so I tried using the official drivers sold for me with the sound cards, but without success: the problem was still there. I tried to find the new drivers of the sound cards on long official distributors and I downloaded it but the problem was still there. Then I tried to delete all the audio drivers on my computer and just use the external sound card for sound but this eighter helps force. I updated my drivers for my sound card build - in as well but again - no luck.

  After substantial thing frist I did when (2 weeks after I bought the laptop) was to contact the store where I bought my audio card and they said that the problem may be so eighter latency or high voltage of the laptop they advised me to try to reduce the latency of the parameters or to try and see if the problem persists if only my laptop running on battery power. I tried two things, and they did not help. Audio cards worked without problems on all the other computers I tried them but me. So they told me that the problem could not be audio cards.

  What I then was that I gave my laptop for the Distributor official of toshiba in my country so that they can solve my problem. What they told me, is that a problem with the version of windows which was preinstalled on my laptop and it was not compitable with the sound cards (which was bizzar survey because I tried them on the same windows and they worked, only on other computers). So I'm back from my laptop and passed under my Windows 7 Home Premium 64 bit operating system to Windows 7 Ultimate edition 64-bit and Windows 7 32-bit Ultimate edition on all versions, that's the problem: whenever I activate a low of passes of audio signal and Audio Usb card he heard cracks and educated. I even tried isntalling Windows XP, but the laptop want spesific SATA drivers for the Windows XP installation which although I found - they helped me install XP and I didn't go the BIOS of the computer to try to put a new and so on, because I'm not sure about that and I could lose my warranty so I said in the official repair shop for Toshiba in my city to put XP on my computer to solve the problem but they can't because they are not liscened to work with software that isn't a recipt for its purchase (which I did not because I bought my windows xp a long time ago and I lost the recipt)

  I gave her to get it repaired for the second time by telling them that the change of my operating system has not solved my problem and what they were doing was they changed the motherboard on my computer, indicating that the build in the device realtek audio on my computer is good enough to support a card usb audio or it may be broken and they change the whole motherboard because the generation of card is stuck, so they did it, but my problem has not been resolved. They told me that although I use and map external audio usb signal always going trough my only internal and I have to disable so I tried to disable this trough Control Panel, but this does not solve the problem and I don't have a BIOS option to disable my sound card build-in. Another thing I thought that maybe the problem is that two audio cards do not work on the same bitrate and Hertz so I put both cards to 16 bit 48000 Hz DVD quality (also tried the other options on the 3 cards that I have) but it's the same thing.

  They told me that it's just my luck and the construction of the sound card does not support this external sound cards and I would had been more careful when they choose to my laptop first.

  I couldn't accept this awnser for several reasons:

  (1) this sound card works on a lower version of windows and are supported by many older models of Realtek and a lot of old computers (one of them bought 2000! and my laptop is of 2010!)

  (2) the guys who were the apperantley of fixing problem don't go so deeply into my problem because they didn't know that in fact the problem was that only they knew that there is a problem with the audio card and the computer interact with them, they knew not that it cracks during the direct play the external audio card.

  (3) I can't accept the fact that Toshiba is manufacturing of models with maps audio chipset that cannot support a simple external Usb Audio card. It is totally unacceptable to me, and I sincerely hope that this is not the case!

  (4) they have tried my audiocards on another laptop of the same series, claiming that they have not at their dispossal at the moment so I'll go tomorrow at a local store and try the sound cards by myself on the same computer in the store.

  What I have now, it was that I gave my laptop for repair requesting a statement of the problem in wrtting with details of the problem so I can go to court or ask for a new laptop, but I'll be charged with little money because according to them there is no problem in the laptop and the problem is that my external sound cards are not compitable with the build in house chipset sound card. If I give my laptop for repair, and there is no hardware problem, I'll have to pay the money. I will do this, but I'm now crazy, because that does not solve my problem and I am wasting time and money.

  What I ask here is, if you can not help me solve my problem and advice me what to do to fix it, please give me the details of the chipset built in Driver sound card on my motherboard, so I can check if it is compitable with my external sound cards and contact the dealers of the sound card to ask them their opinion. Or if you can tell me what it is compitable with and what not, that would be great. Personally, I think this laptop should have no problem at all with a simple external usb running sound card, but I ask you, if you know something more about it.

  If a problem with the build in chipset then Toshiba is manufacturing (or at least sell) audiocards which are not in a normal standart but unfortunately I can not do nothing except complain to Toshiba and never treat whith such productgs more. Otherwise, if this is not true, then my laptop has a problem that is different and I have to go to court with the mans for mounting repair is not my laptop or do not give a new one when I guarantee will not fault of Toshiba and it will be in a way solve my problem.

  I hope that you understand how important it is for me and I hope I have fix the problem as soon as possible.

  P.S

  I want to say that I am familiar with grammar mistakes, that I did in the text below, and I would ask your excuses that I'm not a native speaker of English.

  Hi, I would just say that I had a similar failure although I wouldn't be surprised if she causing of yours, but you never have knowledge, my fault was the lid of my laptop [9 months], it contains the mic and when the lid has been in a certain angle cracks could be heard worse when I got my external sound card all the time it happened, luck, PS, it's a defective membrane [lid to the body] easily missed by engineer because he was the same angle you English is very good

  Post edited by: sido1

• Equium M40X: Need XP drivers for card reader and Lan

  I reinstalled xp on my laptop and came on the Toshiba site for drivers, but I can't find a card reader and the LAN does not seem to work.

  Any ideas where I can find these drivers.

  Hello

  The European driver Toshiba page provides all the necessary XP drivers for Satellite M40X.
  I found the driver v 1.0.3.1 Cardbus and the Realtek LAN driver v5.612.628.2004 for XP.
  So I really don't understand why you are not able to find these two XP drivers.

  They are there.

• I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I have challenged their load m

  I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I thought them charge me twi

  Can I have it please the number on I tunes support whether please or have them call me at * Leonardo B *.

  < personal information under the direction of the host >

• Lets say I got a $10 gift card balance and I want to buy something will be only charged debit card 10 cause of $20 s $ of the balance of the gift card?

  Lets say I got a $10 gift card balance and I want to buy something will be only charged debit card 10 cause of $20 s $ of the balance of the gift card?

  Unless it's a gift card or otherwise indicated, the debit card will be charged $10 plus tax on this item.

  (143858)

• My SD card reader and USB 3.0 Hub have left both answer but see the place in the information system. How can I make them work again?

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. They hub and drive appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the hub and the reader? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Mass storage device:

  Product ID:0 x 1000

  Provider ID:0 8564 x

  Version: 11 h 00

  Serial number: 45H3PTDPV3XSLHKB

  Speed: up to 5 GB/s

  Manufacturer: JetFlash

  Location ID:0 x 14500000 / 9

  Available current (mA): 1800

  Current (mA): 76

  Additional operating current (mA): 0

  Apple keyboard / Trackpad:

  Product ID:0 x 0259

  ID:0x05ac of the seller (Apple Inc.)

  Version: 2.24

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14400000 / 2

  Available current (mA): 1000

  Current (mA): 40

  Additional operating current (mA): 0

  Built-In: Yes

  BRCM20702 Hub:

  Product ID:0 x 4500

  Name of the vendor ID:0x0a5c (Broadcom Corp.)

  Version: 1.00

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14300000 / 3

  Available current (mA): 1000

  Current (mA): 94

  Additional operating current (mA): 0

  Built-In: Yes

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  Manufacturer: Apple Inc..

  Location ID: 0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Integrated: Yes

  Model name: MacBook P

  A simple restart of the machine is reset.

  On the hub to try another cable and a different port if possible.

  The SD is constructed in the?  It can be a bit fussy, Reseat the card with a purpose, repeatedly if necessary so that it can recognize it.

• My adapter for MBP charger is frayed to the point where it meets the magnetic Plug and at the intersection with the white square block despite careful use. This is the AppleCare?

  My Macbook pro does not load correctly because the charger is frayed in two places: near the magnetic clamp and the square block.

  I'm still under Applecare warranty. When I take it on Apple local store (iShop in Barbados), I thought that the adapters are not covered by the warranty and repairs will cost about USD 80 and a new will cost about US $ 130.

  This is absurd.

  Please notify.

  Thank you

  Dr. Sanon

  Barbados

  It should be covered by the AppleCare warranty if still under warranty unless the damage is due to abuse.

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do?

  I want to download free applications, but it doesn't let me do it cause I have a problem with my payment, I try to remove my debit card and the option did not appear, I can't choose no for the payment, what can I do? This happen after I bought some coins for a game

  You must settle the debt until you can download something else of the podcast episodes on the iTunes Store or select None as the payment option.

  (142394)

• Mini PCI WIFI card, what are the black and white wires for

  Hi after a lot of research, I find that my 303 1900 is the later model which can be turned into Wi-Fi, it has the LED on the front panel and the switch on the right side. I contacted Toshiba who gave me the part number which is PA 3212U - 3MPC and telephone number of the supplier, 0870 2202 202 costs about £55.00. After the Panel on the lower part of the machine (which houses the memory), I see the place where insert the PCI, which is holding me back of buying the card would be there are 2 wires 1 Black 1 white stuck with tape in the compartment where the card slips, I understand they are antenna but where are they going? they have to be fed outside of the case or they will work inside. ?

  I used a Belkin PC card for awhile but have a little tired to remove whenever I have the laptop computer in its carrying case. (OK buy a bigger box), Russell.

  Hi Russell

  The driver is usually on the CD you will get with the wireless network card. Don t worry about the installation of the driver. It is very easy.

  BR

• NB100 supplied with Bluetooth and the slot for sim card

  I wonder what model come with bluetooth and the slot for sim card,.

  The NB100? Have a look at the brochures on the Toshiba site.

• I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  I accidentally deleted all my settings and the apple iphone 6 s ID. Now I have to activate my phone and start from the beginning. But I don't have my EA sim with me right now and cannot organize any sim EE. How can I activate my phone without sim card?

  Sorry, but you can't activate an iPhone without a SIM card installed. It is simply not possible to do.

• Qosmio G40-127 - the graphics card and the screen Tower freezer

  Hello.

  I have a Toshiba Qosmio G40-127 and I have a problem with the graphics card, this freezer and the Tower of the screen for 1-2 seconds sometimes when I play World of warcraft
  Why is it like this and y at - it of updates for my graphic driver?

  The same happens when you use your laptop to watch TV or other usual stuff (internet, office)?