CARS can operate with 1 single node 'temporarily '?

Similar Questions

• DeskJet 3050 can operate with only the black cartridge?

  I wonder if the printer can operate with only black ink? The manual says that the printer can operate in single-cartridge. My previous color and black ink run out. So I installed a new black cartridge. However, the warning light is still on indicating there is no ink, and he says "door open". Thank you.

  Hi Alice, yes you can use the single cartridge

  Use single-cartridge
  Use single-cartridge use the HP all-in-one with only one cartridge.
  Mode single-cartridge begins when an ink cartridge is removed from the print
  transport of the cartridge. In the mode single-cartridge, the product can only print jobs to the
  computer.
  NOTE: When the HP all-in-one device operating in mode single-cartridge, a message is
  displayed on the screen. If the message appears and two print cartridges are installed
  in the product, check that the piece of tape plastic protection has been removed
  each print cartridge. When the plastic strip covering the contacts of the print cartridge, the product
  cannot detect the cartridge is installed.

  Have you tried to reset the printer to get rid of the open door msg? See the link below for more details

  http://support.HP.com/us-en/document/c00829896

  Ciara

• ADF 11.1.1.4.0 can operate with the Server WebLogic 10.3.5 and 10.3.6

  For the doc, I know 11.1.1.4.0 ADF works with WLS 10.3.4. But he did not mention if it can work with WLS 10.3.5 and 10.3.6.

  Anyone know it? Landing the answer is Yes/No, could you also let me know the official docs Oracle or web pages for her.

  Thank you.

  ADF 11.1.1.4.0 does not work on wls + 10.3.5

  REFERRED to the information on Certification in the matrix, you see 11.1.1.4 works only wls UN 10.3.4.

  Timo

• OfficeJet Pro 8500 can operate with only the black cartridge?

  I have never use my color printer and do not want to buy color cartridges. Can I program the 8500 to print with just the black cartridge. If so, how? Currently, the printer does not work if all the cartridges are not loaded and with ink. Please notify.

  Hello

  Please try: put a piece of tape on the oblong hole in the ink cartridge of, it will continue to print black only. And once again, it is only a few pages.

  Kind regards.

• The digital stereo headset Microsoft LifeChat LX - 3000 USB can operate with HP laptops?

  I am looking to buy the digital stereo headset Microsoft LifeChat LX - 3000 USB

  for Skype, online DJing and listen to music on my HP laptop. I was wondering if it would work with this.

  Hi Lindsay,.

  If your laptop has USB ports so it should be compatible and should work as Microsoft life chat lx 3000 is peripheral USB

  According to the link below, it is also compatible with windows 7

  http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=006

• How PC can be used with a single creative cloud subscription?

  How many PCs can use with a single creative cloud subscription? For example I currently use Lightroom on a PC at home with 2 large screens, but use a laptop or iPad when you travel. A monthly subscription covers it all 3 or do I have 3 separate subscriptions?

  Hello

  You can activate the creative cloud on 2 machines using the same license.

  Kind regards

  Sheena

• 11g Question: Stand alone database vs single node cluster

  We are about to create a new 11.2.0.3 database that will eventually become a 11.2.0.3 in cluster database. Our host servers are hardware IBM pSeries AIX 6.1 running. We will use just Oracle Clusterware and not IBM HACMP. We also plan to use ASM for database storage. The plan is ultimately to have a 2 or a 3-node cluster, but currently, we have only an AIX server available to us.
  
  My question concerns our initial approach to the installation.
  
  It is preferable to install the Oracle database as a stand-alone database first and then convert the database to a RAC cluster as soon as we have the material for the second node? Or would it be better to create the cluster with a single node and install and configure grid Clusterware for a single node cluster and then add the second node when the material becomes available?
  
  I apologize if my explanation is not very clear. Any notice will be considered and appreciated. Thank you.

  Hello

  We are about to create a new 11.2.0.3 database that will eventually become a 11.2.0.3 in cluster database. Our host servers are hardware IBM pSeries AIX 6.1 running. We will use just Oracle Clusterware and not IBM HACMP. We also plan to use ASM for database storage. The plan is ultimately to have a 2 or a 3-node cluster, but currently, we have only an AIX server available to us.

  My question concerns our initial approach to the installation.

  It is preferable to install the Oracle database as a stand-alone database first and then convert the database to a RAC cluster as soon as we have the material for the second node? Or would it be better to create the cluster with a single node and install and configure grid Clusterware for a single node cluster and then add the second node when the material becomes available?

  If you are planning to ACTIVE/PASSIVE here database my option:
  {message: id = 10138477}

  If you are planning in the future use a RAC database:
  {message: id = 10142640}

  If you plan use CARS in the future, you can install Oracle Clusterware without worry about licenses.
  Oracle Clusterware can serve to protect any application (reboot or otherwise on the application failure), free of charge, if one or more of the following conditions are met:
  

• At least one of the servers in the cluster is allowed for the Oracle database (SE or EE)
  http://docs.Oracle.com/CD/E11882_01/license.112/e10594/editions.htm#CJAHFHBJ

  If you ARE database Oracle or EA (i.e., not one SE), you can install the product Oracle Clusterware and Oracle RAC (EE to buy the RAC Option) in a node later you can stretch clusterware adding additional nodes, and more database instance.

  You do not need to create a RAC database, you can create a single database (i.e. Non-RAC) on OH software Oracle RAC using DBCA.

  Although I prefer that you create a database of CAR Policy-Managed database... which makes the dynamics and the automatic (i.e. managed by Clusterware) creation/deletion of instances. You will use a POOL with a knot... later you can add more nodes in that POOL... Oracle Clusterware/PAP automatically create undo/redo/instances on the new nodes added to this POOL.
  All this is transparent to your customers of Oracle.

  Oracle Grid Infrastructure for a stand-alone server (Oracle Restart) is an option only if you plan used to one node. If you are using more than one node... Start with Oracle Grid Infrastructure for a Cluster (Oracle Clusterware).

  Hope this helps,
  Levi Pereira

  Published by: Levi Pereira on March 12, 2012 13:58

• the new iMac can run with 64 MB of ram?

  Other World Computing the new iMac end of 2015 which can operate with 64 MB of ram. Is this true, and is this safe?

  It can be used with 64 GB of RAM. Gigabytes and megabytes are not the same.

  (139884)

• DeskJet 932C, you can print with just replace the black ink cartridge?

  My question is basically simple.  The printer DeskJet 932C can operate with only black ink?  Color ink was empty for a while now, but the printer kept working, printing in black and white.  Due to the cost of the ink and the absence of any income available, we just changed the black ink cartridge.  The problem now is that the printer will not print not even black and white.  Do I have to scrape some funds to replace the color ink cartridge, or y at - it another way to get the printer working with just the new black cartridge?

  Thank you in advance!

  Michael Sponable

  Hello

  Your printer can print in black only, but up to a certain point , you need tri-cartouche color otherwise it will not print. It's a little late now, otherwise if you only need to print B & W, a monochrome laser printer is very good and much cheaper to run (in terms of cost per page).

  Kind regards.

• can perform us two actions with a single button in two clicks, one after the other?

  Mr President.
  
  can perform us two actions with a single button in two clicks, one after the other?
  
  I want that when I click on the button Add once it add data to the database and when I click again on this button it clears the form data to the empty fields.
  
  Concerning
  
  Tanvir

  In the code, it should be easy.

  The following code adds that a button called butman with text 'ADD '.
  It then registers a listener that will be called if the user clicks the button.

  This listener then calls the runAddData method if you clicked butman while it contained the text of "ADD" and it calls the runClearData method otherwise.
  That's why he will swap the functionality of the button between ADD and CLEAR on each click.

  final Button butman = new Button("ADD");
  butman.setOnAction(new EventHandler() {
            @Override
            public void handle(ActionEvent t) {
                      if (butman.getText().equals("ADD")) {
                                butman.setText("CLEAR");
                                runAddData();
                      } else {
                                butman.setText("ADD");
                                runClearData();
                      } // END IF-THEN
            }});
  

  I hope that's what you wanted.

  Further reflection.
  You might want to run the ADD and CLEAR methods in their own son so that it can run in the background without slowing down your user interface.

  I also reuse rather a single button for several features instead of to apply with hundreds of nodes used only rarely with masses of code to show and hide as needed.

• Can you have a cluster with a single host?

  Hello

  I'll put up a new VMware infrastructure, which includes a cluster with 2 guests in a place and a single ESX host in a second location.  They will all be managed by server unique vSphere.

  It is possible that the second site can earn an additional ESX host at some point in the future.  So, my question is if I have to create a cluster for the second site and have just the single host in it for now, so its ready if we add a second host?  Is it possible to have a cluster with a host, and what are the consequences of this?

  Thank you

  Joe

  Technically, Yes, you can have a Cluster to a single node and if you plan to add another node in the cluster later it makes sense to set up the first node.

  And, both from a technical point of view, but especially from a point of view BAU.  Mulitnode cluster promotion will be less intrusuve there is no additional software to add on the pre-existing main node, therefore you Board change will be less nervous about the piece of work, because it won't change the node pre - that does not exist.

  From a personal point of view my current client runs a number of single-node clusters, in their environment.

• My Thunderbolt screen has only 1 thunderbolt port, how can I Garland with 1 single port?

  My Thunderbolt screen has only 1 thunderbolt port, how can I Garland with 1 single port?

  It has two ports Thunderbolt.  One is connected to the cable, the other is on the back of the screen.  If you can't find the Thunderbolt port, you will have the Mini DisplayPort in the screen version.  It has three USB ports on the back.  The Thunderbolt display has three USB ports, a FireWire port, an Ethernet port, and a Thunderbolt port on the back.

  (The Mini DisplayPort version cannot be connected in a string.)

• How can we do a single element with the content of two clips

  How can we do a single element with the content of two clips

  You try to get a picture of image? In other words, that contained two visible clips at the same time? If you are, change the substantive item to you main plot and another tie on top using an edit connect to the battery. Select the top item. Activate the transform tool and resize and reposition the clamp if necessary.

  Russ

• The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  I love the Apple Magic Keyboard to be very light (I want it with me everywhere). I also like that I can choose the layout of the keyboard I want (Canadian multilingual), which is not available on any keyboard for any brand, with the exception of Apple iPad (and I did a ton of research). I have problems with the old model of keyboard Apple Wireless because of the Bluetooth connection: I often have trouble connecting. I want a reliable keyboard. I don't like having to plug the keyboard on the iPad, and I think that a wired keyboard can more reliable and safer than a wireless keyboard. And a wired keyboard never had battery problems.

  I read that the Apple Magic Keyboard can work wired with a Mac without bluetooth. And I read that some USB keyboards work with lightning to the USB camera adapter. There are several keyboards with a cable (Belkin or Logitech) lightning, but none with the available Canadian multilingual.

  So, if I buy a magical keyboard Apple and a Flash to the USB adapter of the camera, according to my needs, I'll be satisfied or I'm going to be disappointed?

  A better solution would be to have a male-male cable lightning between the keyboard and the iPad, but I don't find any of these products anywhere.

  Thank you.

  It will not work. And where did you read that the keyboard works wired with a Mac?

• I'm Moe with a single user acct and I forgot my password. How can I recover?

  I'm Moe with a single user acct and I forgot my password. How can I recover

  Hello

  This is information from Microsoft for when you forgot your XP password.

  "How to connect to your Windows XP-based computer if you forget your password or if your password expires"

  http://support.Microsoft.com/kb/321305

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Other information above, we can not help you more with this.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.