Carved frame. Camera Basler with FPGA
Hello!
I use a 340kc of acA2000 of Basler camera controlled by an FPGA PCIe-1473R.
After a few adventures, I finally changed and changed the configuration of TAP with this post.
http://digital.NI.com/public.nsf/allkb/EA1727D8D620B81F8625797B0072257C
With just the change in the FPGA, the camera works and takes pictures successful, however the framework is divided into four images (all identical but light intensity).
When I also change the host code, only an image appears in the frame, but certainly not a good image, as previously.
Someone knows why maybe this problem happening?
Thanks for your help.
I think I knew what is happening. I believe that section of the knowledge base that you read is incorrect. We will solve the problem together and I'll correct the article if necessary.
Let's talk for a little bit of what's going on. The two keys are 10 bits each, but they are stored in the 16-bit data type. The two pixels must collect the FPGA to the host with a DMA FIFO. For more convenience, the code uses a single DMA FIFO even if there are two taps. The article suggests that you must combine numbers 16 bits 2-in-1 32-bit number and then send it in the DMA FIFO. There are a few problems with this: first, the DMA FIFO has been configured for 16-bit, so half the data is being deleted. In addition, the code on the host computer is dividing the 16-bit data in 8-bit, which is not correct.
I think it would be better to change the DMA FIFO to support 32-bit data. You can do this by opening the LabVIEW project and right click on the host 16 DMA, select Properties, and then change the type of data in U32. After that, you must program the code on the host computer to divide the number. You will get then two tables (one for each). I think it will reconstruct the image correctly if Interleave you just these two tables.
I have attached a few images. Try it and tell me if this works. If so, I will update the documentation.
Jeremy P.
Tags: NI Hardware
Similar Questions
-
line of Basler runner rul1024 - 57gm GigE camera scan with broadcom network adapter
Hi, I am learning to use a camera basler runner GigE line scan with labview but encounter problems, please help me.
My software and hardware:
LabVIEW 8.6, software of acquirition of vision 2010,
rul1024 camera - 57gm Basler, broadcom Netlink (TM) Gigabit Ethernet Network Card (not an intel pro 1000, so the driver is it also the driver broadcom).
Q1: In the max, it appears two cameras, while I log in only one. There is a red X in the other and a camera in use error.
Q2:
The camera can get the image, but in the attributes of the camera, there is no trigger information, so it seems that I can't solve the relaxation in labview, while the camera supports the trigger mode.
Hi Lynn,
I read the page and find the solution. In fact, I just need further reduce the size of packet to 1500. It works fine now.
Thank you ~.
-
Cannot connect camera Basler USB 3.0 to IMAX
Hi all
I have a few question about connect the Basler USB 3.0 camera with LabVIEW.
I use camera Basler acA1600-20um, it does not appear on my NOR-MAX.
in fact, there are only "Basler USB3 Vision camera 'USB-0' ace' and the error when I try to click on it.
Can someone help me?
Thank you
Racha
Thanks for posting the error screenshot...
-You have been able to connect using Basler pylon software?
-can you right click on the "Basler USB3 Vision camera 'USB-0' ace and the driver NI-IMAQdx and then see the change? -
Hello...
I wonder if you can help me with a problem with my desktop OS X El Capitan 10.11.4 various...
I use FrostWire and the other asked me to update, so I did and came up with this message, 'FrostWire can damage your computer. You must eject the disk image. There is no disk in my hard drive... I try to download again, but still the same message...
Help, please...
Much thanks
Lisa
< re-titled by host >
The actual message means you need to move the mounted image - the small icon that is displayed after you double-click the .dmg - and put it in the trash.
Where do you see the message your computer?
-
AZ1VR Action Cam Mini with a Wi - Fi connection is the GPS integrated into the handpiece
I have the new AZ1VR Action Cam Mini with a Wi - Fi is the GPS integrated into the handpiece
cannellaj wrote:
I have the new AZ1VR Action Cam Mini with a Wi - Fi is the GPS integrated into the handpiece
Yes, get the GPS with the AZ1 to remote LVR2V wrist. You must also update the firmware in both devices. I have both and they work great.
-
On a Linux operating system, what tools need to developed a real-time application communicating with FPGA?
It is not unclear to me by reading the documentation on the website OR tools or drivers should I install on a Linux operating system in order to develop a C++ real-time application (that interact with FPGA) which will take place on a sbRIO-9651.
Is this possible at all?
Thank you
Michel
Everything works very well with an FPGA VI, compiled with LabVIEW FPGA 2015.
1. I have installed Eclipse on CentOS 7 with cross-compiler found at this link:
Compilers C & C++ GNU for Linux ARMv7 (Linux host) 2014
2. I also install a debugger crossed to debug application c / c++ remotly. Once on the page go in the section "Linaro Toolchain for Cortex-A" and download the second link linux "linaro-toolchain-binary (big-endian). The binary gdb is in there, so you must point towards him in the Eclipse debug configuration:
3. I installed the linux drivers from NOR-RIO 15:
4. I was able to program an application to c / c++ opening and running a LabVIEW FPGA Bitstream in a few steps:
Example of API Interface FPGA C OR real time Linux and Eclipse
Michel
-
9144 with FPGA and SGL EtherCAT custom user-defined Variables?
Hello
I currently have a small instrument driver (rs485) running on a chassis of 9144. The output values are communicated to the master EtherCAT using FXP numbers. I would like to pass these FXP to SGL, since I've upgraded to SP1 2012 LV with FPGA now supports numbers of SGL.
Is this possible? I tried several times to create the Variables defined by the user of SGL in the project, but the date type is gray.
Greetings from Munich,
Götz
Unfortunately, SGL is not a data type supported for communication to and from a 9144. The types of data available for the I/O user-defined variables are:
* Fixed point
* Signed integers (Int8, Int16, Int32, Int64)
* Integers (UInt8, UInt16, UInt32, UInt64)
* 32 bit field
* BooleanMore information on I/O user-defined variables can be found at:
Programming EtherCAT i/o with FPGA Intelligence to: Differences in LabVIEW FPGA programming API
http://www.NI.com/white-paper/10618/en#toc4 -
original title: lack of games
I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.I have no games. No solitaire, Minesweeper, no nothing.How can I, without seeking to erase and reinstall again?To activate the built-in Windows 7 games:
1. click on Start (lower-left) and then on Control Panel.
2. click on programs and features.
3. on the left side of the screen, click on 'Windows turn features on or off".
4. find the entry called games & check the box next to it.
5. click on OK.
6 reset.
If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.
-
I bought a computer from a business and it came not with all drives.
Original title: I bought a computer and it came not with all drives.
I bought a computer from a business, and it was a computer on the network. It came not with all drives. Is it possible to reformat the system with out having to re - buy windows xp or office? Can I get copies of XP and Office? I still have the XP sticker with the computer.
If they don't give you the disks, all you need is a boat anchor. Ask them to give you the disks and product keys. Otherwise, you will need to buy.
-
My Canon MP560 came up with an error message "U041".
My Canon MP560 came up with an error message "U041". Anyone know what it is? I think it means that I need to replace the ink cartridges.
Or can you tell me how to find the answer on Google?
HelloI suggest you to contact Canon support on this issue because the problem is with the ink cartridge. -
I bought the design Adobe CS6 and premium and I need to download my product on my new laptop computer, however I don't have the CD came it with my purchase. How can I download my product without the CD files
Download and Installation Help-
https://helpx.Adobe.com/download-install.html
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
Question:
I use Photoshop CS5 version 12.1. Photos I take in Camera Raw with my Canon 60 d are visible and can be worked, but those taken with my Canon 70 d are not. What can I do to be able to view and work on Camera Raw photos taken with both cameras? Y at - it a plug-in that I can use that will allow me to display and work on photos of 70 d and my photos of the 60 d? Helpful suggestions are appreciated.
The 70 d has not supported until the Camera Raw version 8.2:
Devices supported by Adobe Camera Raw
PS Camera Raw versions of CS5 ended with 6.7:
Camera Raw plugin and Adobe application compatibility
You have two options: upgrade to at least Photoshop CC or CS6 or get the free DNG Converter to convert your RAWs 70 d DNG for use in CS5. The last option will always require an additional step.
Digital Negative (DNG), Adobe DNG Converter | Adobe Photoshop CC
-
Desktop adobe Creative Cloud for government applications :end user administrator came back with 2 questions. Since the Bank has its workstations (computers) in a network segments separated physically (Internet and Intranet), are they correctly assuming that:
- They will be able to download and activate the installation package through CC e package on Internet workstation and transfer with a USB flash drive on a workstation Intranet , hence they can deploy desktop applications to end-user desktops CC?
- The deployment of renewal process will work the same as above?
Government accounts https://forums.adobe.com/thread/1483694 can help
or
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">===>
Don't forget to stay signed with your Adobe ID before accessing the link below
Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html
or
http://forums.Adobe.com/community/download_install_setup/creative_suite_enterprise_deploym ent
Creator of Enterprise Cloud https://forums.adobe.com/thread/1489872 License Restrictions
-
Camera raw Adobe gives me 8-bit and 16-bit option for files to open, but my camera works with 14 bit (canon 6 d), what to do? If I get 8-bit option that I don't take advantage of the 14 bits on the other hand if I go for the option of 16 bits (as says that my files are 14) what's happening?
Photoshop will work with the 14bpc data in the raw file, don't worry about this. The options that you mention "workflow" and apply to the final rendered file opened in Photoshop (bit depth, color profile, pixel dimensions and the value of the PPI). "16bpc" of Photoshop (15 + 1) is the only option if you need more output 8bpc ACR.
-
I bought a camera Leica with the Lightroom software, but after I downloaded it, it is only a trial version with the numbered days. What should I do?
Sam h. l.c52679592 wrote:
Thanks for you advice. I clicked on the link you gave me, but somehow it gives me just a skin. I'm back to the same trial version, this time with a day less to use.
You must download it from the website of Leica. See the links in my post above.
If you did that?
Maybe you are looking for
-
Configurator can deploy more apps?
Hello You can use configurator to deploy applications more once you have all your iPads travel configurator to prepare them for the students? I know that you can add that app and re deal throughout the Configurator, but since its manual and we 100...
-
Drop-down menu display in miniature on wrong monitor
I'm on a 15 "MacBook Pro retina with HDMI to an HD LCD TV. OS X 10.8.2 Firefox 18.0 When I have the Firefox browser on the TV screen, drop-down menus appear in the thumbnails on the screen of the MacBook. I have disabled hardware acceleration, and it
-
Client VPN blocks inbound connections from remote desktop?
I am running Vista x 64. To connect to a VPN Windows via the built-in VPN client works except that it seems that all incoming connections from the local network (including remote desktop) are blocked. Is this a known problem or design? It is a proble
-
The resale of Windows Vista OEM (dvd and license)
If I build me a PC parts and use OEM windows Vista Home, can I consider all 4 years later apart sells parts and the vista OEM software all stay? The license is no longer in use. Therefore, it is fair to say that it can still be used by a PC? Should b
-
When I want to send a document from WordPad - I find the 'send e-mail', get the Microsoft e-mail format (the document is located in the "Home" part). I type the e-mail address, click on 'Send'... and it is NEVER RECEIVED by the person that I sent him