Cases and the common name A1490 and A1495

Similar Questions

• SSL protocol error.  Certificate is either not valid, or the common name or authority are not recognized. I have

  Hi, I have problems when I tried to open a PDF document with a font of RM generated in the Laundpad, I use a certificate with the common name self-signed ssl https://127.0.0.1:8443 and the URL in the basic configuration is the same. I tried to fix this for a week but I could, and I do not understand How to solve.

  If anyone can help me, please. It is the image when I try to open a PDF file with RM policies. Thank you

  

  

  

  

  So the value CN should be without the ": 8443" Bill creating the cert file?

  Below: Ive installed and trusted certificate in personnel and the certification auth trusted root.

  At the opening of the URL: https://192.168.1.35:8443 / / / AdminUI in Firefox, I get the following error:

  

  @ IE, I get:

  

  Thanks for looking at this!

• the entrance is not sensitive to the case of the user name?

  I have a login section which has a username and password entry field. I don't know if I'm doing this right, but since there is only a single user name and password, this is how I did it.
  
  function checkPassword(userN:String,_passW:String):Void {}
  If (userN == "collections" & & passW == "winter2008") {}
  Let users to proceed
  } else {}
  error message
  }
  }
  
  Now, my question is how can I have the username will be not not case-sensitive. Is this possible?
  
  Many thanks for any help!

  You can use the toLowerCase() and toUpperCase() for you methods give a string that you can compare with reliability. You can also sort all stray space characters that the user can type. Try something like this:

• List of the files in the dir with the common name [JS] folder?

  I'm probably getting on the nerves of the everybodies now - and I know I should try harder to convince my boss to let me "Scripting InDesign CS3/4 with JavaScript" - by my Savior on several occasions Peter Kahrel. I know, I know.

  I only snapped Applescript (roughly), now I have to go cross-platform, and I'm a JS noob.

  All that being said... I can't try to file requests that all start with the same 8 digit number in a specific folder.

  In Applescript, I was able to use:

  the value servergraphics to (name of every file in the graphicpath folder whose name starts with adCID) as a list

  This has created a list of graphic files that I can match against.

  Now, I have tried every way I can think to duplicate this line in JS - nothing works.

  Should I declare an array that contains the calculation?

  Thanks in advance - new

  Hello

  var Folder = folder ("/ drive / file /");

  Uses of the var = theFolder.getFiles ();

  theResult var = [];

  for (i = 0; i

  {

  Assuming 8 sequence of numbers is a static number.

  You can also use grep to match 8-digit >

  If (theFiles [i]. Name.match(/^\d{8}/);

  {if (theFiles [i]. Name.IndexOf("01234567") == 0})

  theResult.push (theFiles [i]);

  }

  }

  theResult;

• Firefox can't analyze my certificate while IE can. I imported my this at once, IE is fine, Firefox says that the certification is valid for the period of INQUIRY only, not the DNS name

  Details: - created a CA with PfSense - created server SSL certificates imported from my own servers (ESX, PfSense, email,...) -the authority of certification in Internet Explorer as a certification authority root of new trust - connect to my server with their local DNS names and receive the page without warning - any HQ in Firefox as a new authority - to connect to my server using the DNS name - a error message: certificate is valid only for 172.31.1.20 (the IP address of the server) - to connect to my server using Firefox and the IP address and receive the page without warning

  The AC is very good because it is used by IE and Firefox and even complaining, Firefox don't doubt the authority. The server certificate does not include the name, and can find it. It is true that when I created the certif, I added an additional field with the IP address. The certificate should be valid for both the DNS name and IP address. When I try to connect to the server with IE using the IP address, now it's THE who complains that the certificate is valid for the name :-)

  What should I do for Firefox to accept my certificate in his name and validate with the CA instead of making several exceptions for everything?

  This is the certificate sent by the server:

  BEGIN CERTIFICATE-----

  MIIF5jCCA86gAwIBAgIBBzANBgkqhkiG9w0BAQsFADCBgTELMAkGA1UEBhMCQ0Ex DzANBgNVBAgTBlF1ZWJlYzERMA8GA1UEBxMITW9udHJlYWwxDTALBgNVBAoTBEhv bWUxGzAZBgkqhkiG9w0BCQEWDGFkbWluQGpiLmxhbjESMBAGA1UEAxQJSkJfTGFu X0NBMQ4wDAYDVQQLEwVJVFNlYzAeFw0xNjExMTIwMjI1MjRaFw0yNjExMTAwMjI1 MjRaMIGCMQswCQYDVQQGEwJDQTEPMA0GA1UECBMGUXVlYmVjMREwDwYDVQQHEwhN b250cmVhbDENMAsGA1UEChMESG9tZTEbMBkGCSqGSIb3DQEJARYMYWRtaW5AamIu bGFuMRMwEQYDVQQDEwplc3guamIubGFuMQ4wDAYDVQQLEwVJVFNlYzCCASIwDQYJ KoZIhvcNAQEBBQADggEPADCCAQoCggEBAMWoRcxHoBjR2rKOPAI/dtpWlTiqOGDg zZZWJ6n24ZYUfh9L6vUmzqajfAbj6 + fndzKahb69PLi + tsnt39yGsKWkXUd3y7Wq 5PkaGSqi/mJKB7/H0qL4Ig2FK9/uK9QGK019NvDN1jnLgF6MoNAIZEOVjqalpnXD O8Eu + vaKPsHbvNziNj7uQR8CdcMU9lEF6gcmFu8xOrukb3ocpyJ307PHqx3AlrU0 sBuit21glineB9XKMyBaon9D3mrNUXmvHy3xcBvHPwcgqnNDKd7CZwdfaXw4Hb4i t7BYgSsn66UxPcrDvoho9aDbXnjmOuPCo/FMsZxfr9ETZyGIllsXE2UCAwEAAaOC AWQwggFgMAkGA1UdEwQCMAAwEQYJYIZIAYb4QgEBBAQDAgZAMDMGCWCGSAGG BEI DQQmFiRPcGVuU1NMIEdlbmVyYXRlZCBTZXJ2ZXIgQ2VydGlmaWNhdGUwHQYDVR0O BBYEFEILwkf/4I50YT + fZ/2wcETS6CBVMIGuBgNVHSMEgaYwgaOAFEgmUROxoVJM txyWvypJ4wcF8B2RoYGHpIGEMIGBMQswCQYDVQQGEwJDQTEPMA0GA1UECBMGUXVl YmVjMREwDwYDVQQHEwhNb250cmVhbDENMAsGA1UEChMESG9tZTEbMBkGCSqGSIb3 DQEJARYMYWRtaW5AamIubGFuMRIwEAYDVQQDFAlKQl9MYW5fQ0ExDjAMBgNVBAsT BUlUU2VjggEAMB0GA1UdJQQWMBQGCCsGAQUFBwMBBggrBgEFBQgCAjALBgNVHQ8E BAMCBaAwDwYDVR0RBAgwBocErB8BFDANBgkqhkiG9w0BAQsFAAOCAgEABCFChNXJ ACISI + 7hNbpiwIsjpDB0fLKB/9sPXC1uiwzGv7o/fkImYPJzQcKP0a3V6elX4kd7 x1poYAfawVIpKJgwzgEWnMJADgPKVMymkxBr3Qlq + 3oAiC4pTdI79GKaZKshxANS 7OBoklRDYWStHnCdw96IWuu6Ih2mbsbRVUFIJnHPHpCFS1J45tLYWoxPL/L1uX3v /Pz8SollYXtZ +. uVhdkkzJcHcEsZjvBe3eMmxm93l7Cy/5kCDf2 + kx67weNRrxbFt VaEyFCypCJlJn4Gj17y0JnhPUN1/h7Ck4XcTLX28 + Ab2Ls9/rXnXMQvkKcrRhvyT CV4XJ756hap/zT + KJJzY8 + T5ggdkKlcbZsvvgVSuNNv1aSQmR + bbF5ry23oszXVO FaEEAtcofaHa5MMebNNWrz4o/qYuPGBnVq3NmxiNNKm + / Ed5ky4AdkXT7Ny11mgA C2DzGahyXfbfGFa21ig/R0NAxkP00TXWiuSE/7 b/EGe9qNDB + WF7Qb5I9U6EoWYZ EEmE8G/43ClaZCorJJN7iZwwMx2iQJgyuea hy9hgXU5GjmXmrpqmtvyGxrywalcXPzvFOs + aSXf1H2tLSMc9n3LH8g0lDgpcC6P484ef1cmG3/hVD5QLWyjblMnF0XjbMyij5Hj eTrPLTwW8AYjoIz0DZRoVPxpdz/o =

  CERTIFICATE OF END-

  This is the certificate of the CA that signed it

  BEGIN CERTIFICATE-----

  MIIGbjCCBFagAwIBAgIBADANBgkqhkiG9w0BAQsFADCBgTELMAkGA1UEBhMCQ0Ex DzANBgNVBAgTBlF1ZWJlYzERMA8GA1UEBxMITW9udHJlYWwxDTALBgNVBAoTBEhv bWUxGzAZBgkqhkiG9w0BCQEWDGFkbWluQGpiLmxhbjESMBAGA1UEAxQJSkJfTGFu X0NBMQ4wDAYDVQQLEwVJVFNlYzAeFw0xNjExMDYxMTQzNTJaFw0zNjExMDExMTQz NTJaMIGBMQswCQYDVQQGEwJDQTEPMA0GA1UECBMGUXVlYmVjMREwDwYDVQQHEwhN b250cmVhbDENMAsGA1UEChMESG9tZTEbMBkGCSqGSIb3DQEJARYMYWRtaW5AamIu bGFuMRIwEAYDVQQDFAlKQl9MYW5fQ0ExDjAMBgNVBAsTBUlUU2VjMIICIjANBgkq hkiG9w0BAQEFAAOCAg8AMIICCgKCAgEAtRfmJ8HhxD6OeBSTdiK36DF/Gw7HmOIO CN9LktUCcnXZfsbkyPwGq8AtLTURfYU1VKHw066g0XD0hEbFEaYIWvVKijiqaPZg Pc / pIAj + M7vzojeCnv6QiRTcC9q5rY9 + Ff7MuTkWKEPzjuXpHd + IoS4To3sVZgsy YcxrdRndcirxm6aFjGXIYaImPm3hLuMteSagacsjduGEDOpJ5hJoMIIX4kHE/x8J DFBvlllXIGiOgCHU + 8hcN1IadNFqQcWA3eFB5SgLPFxOOmR4xpB1LsrESC4Zgk/E XmZYBCsYHzg58Cq6r4xuwckutcd5Gjo9ujaafCfAlUFHFJxqLxyy + N0nd3P + i5Kd zPpwpyIAzOCPeZvM2chspspl3pER + RlqZODLoU3gSAz4z + knxKxeyyiK8cttMHkV Di5veqSRIxYeYtJqu0asEaBiQ0ZpdqsNcQEU3rwzo6uoxxgvRr2Ujb6csr8CqhuA 2Sz0W1upgcpZhuL0VMTkMS8P8fgzZZeIU85v7drldXsvpjzaMwHdm/MKGewA0eCZ fUTI6V + uY9oaT9GH8MPzGWzB4oYb3sRgKgLkvWGckyHe3YVwUpb4z/MXRFB3bN/Z qxIyochY8pJMcJe2jrTw79Sf9FAR/txonPBAxuNtGLIdcL4ElGjlXPDXlQrI8XbI n/Abbs3iFHsCAwEAAaOB7jCB6zAdBgNVHQ4EFgQUSCZRE7GhUky3HJa/KknjBwXw HZEwga4GA1UdIwSBpjCBo4AUSCZRE7GhUky3HJa / KknjBwXwHZGhgYekgYQwgYEx CzAJBgNVBAYTAkNBMQ8wDQYDVQQIEwZRdWViZWMxETAPBgNVBAcTCE1vbnRyZWFs MQ0wCwYDVQQKEwRIb21lMRswGQYJKoZIhvcNAQkBFgxhZG1pbkBqYi5sYW4xEjAQ BgNVBAMUCUpCX0xhbl9DQTEOMAwGA1UECxMFSVRTZWOCAQAwDAYDVR0TBAUwAwEB /zALBgNVHQ8EBAMCAQYwDQYJKoZIhvcNAQELBQADggIBAHVLp0nsXNHjvcjWado0 v1M167gEv8SnLMzDRJ7rOwfQlG0JWIXgrMk + 9bLQixFPbClG2MzOGhq2gyXbTFEH PYLfOxRy5gsrYhBYKso4PNrP8ouBaedl / + huobFtd1SR4bNrZ5Be3crQkZhULmlv hSVWklOC + o0rdfPnDffDRtoWH1x1 / + ZRS0N0MSwXqeoQTEgu9CYRCEeLnidcdd1v e6XR + Qw2qLfPqBCKzCVNGZvpVjqakERxaLgWPqwixIQ4sdPjvtnUJxsUEo5hN + 6 / + os/HZ1iO3Bgi6DgAGToTSmsf5 + pI/z + o2FjDrDvbBhvf4FulvvOCsRBNkA5BK NgisFXP / FN3WlkrbM1OZjWIan1phQAw5mDLfqwxJE + BuedK1HqLRNTay9eOGSRSu TRIi26fwwMAdsPnDj3X7/aUCWslVrvZPRmsIOgykLuHlCgYD99mpzF0v + t8y05iE V3115CCve + qFHH52j078jxo1aKyfQTnRGvdGehWI77Pd/l9CMgNJ7K0ZRx6RUoEV 9CMH6kgqagkXU7eT2CXszxrGHAgybnNaJ/z4BjxDme0TH3bgLc4AOIiP8doe7KlJ lYvrG8UMtCkL1jhYFX4Rz/BH5yte7aqzwBVUZrcmvM2gU9ZyPNaAfCDygCUMeMqt OWQEicvGZtRj2ZK6PKv5hk0a

  CERTIFICATE OF END-

  In Firefox, a list of other names of the non-empty object overrides and replaces the common name field. If you need to list all the relevant host names in the field of SAN in your certificate.

• Targeting several subforms with a common name in all a form

  Hello

  I found a few tips of this online, but this day with few details as effective methods.

  Did anyone had success with subforms that have the same name across a form of targeting? The intent is to hide or disable the content of these subforms by using a script.

  These subforms are many and at various locations in the form, so I try to find a way to use the common name for all these target at once, as opposed to specifying absolute locations for all of these subforms. By comparison, what comes to mind, is how classes can be used in CSS to target several elements. My first thought is something in the sense of getElements, although I got a bit of a wall of bricks so far!

  Any thoughts would be greatly appreciated!

  Thank you

  Swiped it set of a locking simplified fields Radzmar validated any script and it seems to work. I surprised myself sometimes (I'm not a coder!).

  function hideSubs(vNode) {
       if (vNode.className === "subform") {
            //name of subform you're targeting
            if (vNode.name === "targetSub") {
                 vNode.presence = "hidden";
            }
       }
       for (var i = 0; i < vNode.nodes.length; i += 1) {
            hideSubs(vNode.nodes.item(i));
       }
  }
  hideSubs(xfa.form);
  

• I want to remove the names of registered users who are wrong and in some cases include the pword... alterations.

  Among the usernames being saved are errors... so when you enter the username box, I get a "list" of names of users. A couple username + password because apparently has not seen that the tab key did not move the slider and it was just marked on the user name. I wish I could delete or reset the user names. Questions from the forum deal with saved password, but I did not save any of my passwords and user names are automatic, unless I disable history research and form "Save". Any suggestions?

  Follow these steps to delete the recorded data (form) in a drop-down list:

  1. Click on the (empty) input field on the web page to open the drop-down list
  2. Select an entry in the drop-down list with the mouse or the cursor key
     do not click with the mouse or press the Enter key
  3. Press the DELETE key (on a Mac: shift + del) to delete the highlighted entry

  You can also check the Manager mot de passe for registered user names and passwords.

  • Tools > Options > Security: passwords: "saved passwords" > "show passwords".
  • https://support.Mozilla.org/KB/password-manager-remember-delete-change-passwords

• How can I get automatic fill-in of the user name and password?

  It is similar but different from my previous question. On a computer when I open Firefox it opens automatically log me in my homepage (a Yahoo mail account). When I open a new tab in my gmail login happens with my already filled username. All I have to do is click NEXT and it goes to the login with my password information page. I can't get firefox my my other computer to do this. My homepage comes up with my informed user name, but I have to manually go through the login process. When I open gmail in a new tab, I can't do anything except: 1. press ENTER and get an error message, and then click in the user name box, or 2. Re - click the gmail to re - open the tab. Once I did this the page comes with connection two names - the strange correct one and a few. (I've not been able to get rid of the weird name, either). I would like to be able to fix things, so Firefox will do the same thing on this computer as it does on the other.

  Someone at - it suggestions?

  A detail as a website to remember you (automatically log you) is stored in a cookie.

  You can use these steps to make a Web site recognize and remember you:

  • Create a cookie 'allow' except to keep these cookies, in particular in the case of secure websites and when the cookies expire when Firefox is closed.
  • Tools > Options > privacy > "Use the custom settings for history" > Cookies: Exceptions

  You can delete cookies for a Web site to make the site forget about you.

• New ThinkPad T460p just arrived - the product name and serial number missing from the outside of the machine

  This page shows where the product name and serial number should supposed to be on my ThinkPad: https://support.lenovo.com/us/en/find-product-name?cid=EDM_2016_NA_US_PP_SUPPORT_V2&RRID=1014681098&...

  However, any of these are displayed on the outside of my machine anywhere.

  I happen to know the product name and serial number. I was able to find other ways - that is not the issue. As far as I know, these physical labels should have with the machine.

  Was it simply a mistake during Assembly, or Lenovo just stopped putting on these labels? If the first case, is there a way to ask Lenovo send me these labels? If the latter, Lenovo might consider updating the page linked above.

  Any inisight would be duly appreciated.

  Nicholas

  My T460p shows the T460p at the bottom right of the screen and the serial number and the code of the product under the battery. But the T460 is very dark on the corner of the screen, and Seraglio/product numbers appear on the very dark black label under the battery.

• The file names changed in wingdings, including the file extension and I can't delete, change them, open, etc. Here are the pictures.

  Have (had) a file with multiple files it contains with pictures in each file.  A week ago the pictures were there.  Now, the names are replaced by wingdings as names and file extensions.  When I try to open it, it is not accessible and that the file name, directory name or volume label syntax is incorrect.  When I try to delete it, it says that the file name you specified is invalid or too long and specify a different name.  When I try to rename it, it tells me that if I change the file name extension, the file may become unusable.  If I try to change anyway, it says I've specified file name is not valid or too long.  Only tried for the name 1.  I did a restore in the case where a program interfered with that.  However, nothing has changed.  All of the suggestions.

  You can download and try to delete the file Unlocker http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtmlwilh.  Although it is not designed for this particular circumstance, it may very well work in all cases, as it has been very successful in a wide variety of situations are not specifically highlighted in the directions (where do not work the normal Vista options).  NOTE: Some antivirus flag programs this program as a malware, but it is a 'false positive' and is safe to use perferctly.  My own software to flag, but several other well-known software products it clean and the warning is included in the documentation of the program.

  I wish there was a way to save the images, but at this point, it seems that the only option is to delete because you can't rename files EHF (if this option is available-I hope that work above).  Unfortunately, System Restore does not affect the files of data, so even if a program caused this, System Restore can eliminate the cause, but it would not restore the files to their previous names.

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky because they retain the files called snapshots http://windows.microsoft.com/en-AU/windows-vista/Previous-versions-of-files-frequently-asked-questions.  It can be used to recover previous versions of files that have been changed or deleted accidentally.  Here's how: http://www.microsoft.com/windows/windows-vista/features/shadow-copy.aspx.

  If you have Vista Basic or Premium of Vista, you don't have a shadow, but there is a free program for you that does essentially the same thing called Shadow Explorer: http://www.shadowexplorer.com/.  I suggest that you download and implement as soon as POSSIBLE to protect you if you accidentally delete or modify a file.  It will not help you in this instance, but it can help save the next time.

  I'm more concerned about why this has happened in the first place and prevent it from happening again.  I saw file names change before, but never of wingdings which then do not let you open, edit, delete, or rename.  We will check some of your system files: go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  If you find any these corrupted files, try to post them here.  Maybe we can replace the good files on the disc.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer about the name change (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work - but it will probably not fix your renamed files.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• My Nasa TV and the Viet Nam TV stopped working

  My Nasa TV and the Viet Nam TV has stopped working. I uninstalled them both without success. What should I do now?

  I don't know exactly what happened, but I think that maybe it's an update or a program I installed. I have another account on this laptop; HP DV5T-1000, for the games.

  Hello

  ·         Are you able to see other channels except Nasa and Viet Nam TV?

  ·         You have uninstalled, does the TV tuner card or drivers?

  Method 1: If you feel that this problem happened after the update or a program that you have installed, try to perform a system restore to restore work correctly parameters, to do this, follow the instructions below:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  For more information, see this link below.

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2:

  You can try to temporarily disable a software antivirus (and any other security software) and the firewall on the computer and try to connect to the TV.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

  Note: Make sure that you enable the antivirus software, other security and firewall programs.

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps!

• How to configure Apache to send the queries based on the domain name to the forms, www and Servlet directory?

  Hello

  I installed Oracle Forms 11.1.2.1.0 on a Linux server.

  This server will run a Forms application, a web site and a Servlet for a couple of unique clients.

  Each client accesses its own applications through its own domain name.

  For ex:

  http://Customer1.mydomain.com/forms/frmservlet?config=CUSTOMER1 -> Forwarding Port Weblogic 9001 (Forms)

  http://Customer1.mydomain.com/www -> Directory access... local/htdocs/customer1/www

  http://Customer1.mydomain.com/myservlet -> Weblogic 7101 port forwarding. This a new server created in the field of Weblogic to run Servlet. Each Servlet will be deployed with a specific context by customer: myservlet/customer1 /

  http://Customer2.mydomain.com/forms/frmservlet?config=CUSTOMER2 -> Forwarding Port Weblogic 9001 (Forms)

  http://Customer2.mydomain.com/www -> Directory access... local/htdocs/customer2/www

  http://Customer2.mydomain.com/myservlet -> Port forwarding Weblogic 7101 with PathPrepend: myservlet/customer2 /

  My idea is to configure the Apache Server using 1 VirtualHost by customer:

  < VirtualHost *: 80 >

  ServerName customer1.mydomain.com

  ServerAlias *. Customer1.mydomain.com

  DocumentRoot "/ u01/app/fmw/asinst_1/config/OHS/ohs1/htdocs/customer1/www.

  < /myservlet location >

  SetHandler weblogic-Manager

  WebLogicHost myhost

  7101 WebLogicPort

  PathPrepend /customer1

  < / location >

  < / VirtualHost >

  Is this a good approach?

  Can I place block < location > < VirtualHost > block?

  From what I've read on the web, it is the common way to request proxy based on URL.

  My first tests raised an error like: CONFIG_ERROR [line ap_proxy.cpp 1735]: 'WebLogicCluster' or 'WebLogicHost' specified in the parameters of

  That's why I wrote this question.

  Further more, can I add a specific redirect for forms inside the VirtualHost customer who will redirect

  http://Customer1.mydomain.com/forms -> Redirect to Weblogic Port 9001 (Forms) adding /frmservlet? config = CUSTOMER1 you URL?

  Thanks in advance.

  Your approach is correct, but there are a few details that need tweaking. Can take place inside VirtualHost. Have you enabled ability to host virtual by uncommentNameVirtualHost *:80 in httpd.conf?

  


• LOV cascading if I don't have only one table with the customer name and the name of the product in the ADF.

  Hi Please help me how to use cascade, if I don't have only one table with the customer name and the name of the product in the ADF... I use Jdeveloper 11.1.

  For the client, I used customer VO with client list to fill but to populate the product that I use bind variable PrODUCT_NAME select distinct from TABLE where client_name =: bindCustomer

  so first of all, I need to set the variable of liaison on behalf of the selected customer.

  Can you please tell me how to set this variable binding in this case.

  After you set the LOV to your product attribute, correspondting VO in the LOV will appear under view accessors.

  Change the accessor of the view, you will see the variable binding. Set its value to the customer field of the parent object.

  Visit this link: https://www.youtube.com/watch?v=nXwL2_RP7AQ

  Kind regards

  Elias.

• How to display the member name and/or Alias according to generation in Studio EN?

  I have a report that contains relatives in lines that are set to stretch and show Member aliases. During the expansion under the parent I would like to display the member name and Member Alias. I tried conditional formatting to replace the Alias members using a text function, but replace only accepts text, not functions. Does anyone know how to do this?

  I use 11.1.2.3

  Do you need to in the same column? If this isn't the case, you could pull in another column of the alias and use conditional formatting to hide either or depending on the generation.

• Error and pointing the domain name on business catalyst site.

  Hi guys I searched for a solution to this problem, but I can't really find a good answer. I'm relatively new to the website management just a heads.

  in any case, I have re-done recently the site for my business using Adobe Muse and we bought one of Adobe on BusinessCatalyst hosting plans. We already had a website hosted on Wix with the Verio domain name. We closed the Wix site has received and has changed the name of the server in Verio to point to the new site of catalyst for business, but every time I try and add the domain to the site I get an error message. It is said "error: domain name already exists." Please remove all records associated with that domain name before adding it again. "I thought he should have clear benn because we removed all Wix services and show name servers.

  Any help would be greatly appreciated! Thank you!

  That error means that the domain name is already in the system of catalysts for the company. Is it possible that you tried implementing a different Business Catalyst site with the domain name?

  I'm moving this thread on the forum of Business Catalyst for more detailed for you help.