Cat changed my point of view.

Similar Questions

• I changed my point of view screen to "maximize" and then changed back to normal and "applied" this change. The view on my screen moves back between the two.

  I went on 'Properties' and then changed the screen to "maximize" that was impossible to navigate.
  I then reset the command on the screen 'Normal' then 'Apply' and 'OK '. Now when I open Firefox it
  by default, the maximum size of the screen. No matter how many times I try to re - configure
  the size of display screen, the default browser to the Maximum size. Nothing works!

  You can check if you have a user.js file in the Firefox profile folder that affects the pref browser.sessionstore.resume_session_once true value.

  • http://KB.mozillazine.org/browser.sessionstore.resume_session_once

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved

• The specified display list is invalid or points of view have been selected using a different pattern

  Hello Experts,

  I get an error when I perform the aggregation using the aggregation view which was working fine before. We have ASO cube.

  'The list of the specified view is invalid or points of view have been selected using a different scheme'

  No major changes has been (as change the ownership/megaupload type etc).

  No addition of level in one of the dimension.

  Only members are added at the same level

  Please let me know what would cause to become invalid.

  Thank you

  Raja Mohamed

  RajaMohamed wrote:

  The change is only the addition of members at the same level.

  Only way I can see what is possible is if the dimension change your attributes, and where you had already all members, associated with an attribute, you have now a few not associate members.

  Take a good copy of the outline (or restore from backup) and run the MaxL following on the old and the new cubes:

  query database app.db list aso_level_info;
  

  That should show you where the differences are.

• agricultural point of view tool and pixel dimensions

  I used to use the perspective crop tool to solve the problems of point of view "key hole" and get the files that were larger than the original. Now, I'm getting tiny files after using this tool.

  What's changed, and I change it back?

  Thank you

  Phil

  I found the problem and the solution! It is in the preset tool bar. Somehow, I changed the settings. I changed them back to non-contraintes and all is well.

• Levels of the different point of view to a PDF form

  Levels of the different point of view to a PDF form: I have a PDF form that requires the intervention of different people. However, I need to hide certain sections of the form to be used only to specific people. How?

  You define the fields to be hidden by default. You can add code to show and unlock these fields by the user to enter a password, but it is a very weak control.

  Another approach is to use the ID of system connection. The only place that acrobat/Reader sees this information is in the identity object and to access this object in a form requires a special encoding because when you open a form it is not initializing the application, an event console. or a batch. You will need to add a special user folder script to each special user or all users to be able to access these data in a form. This may require the assistance of your IT support form.

  The folder level script could be:

  var MyLoginID = identity.loginID;

  You can access the MyLoginID in open a PDF file to get the ID of the connection. You can change the variable name for security reasons.

• change the angle of view of grid 3D with existing objects

  Hello

  I'm new to the perspective grid in Adobe Illustrator and would really appreciate some help. I created a simple room with a 2-point perspective Interior and an angle of 45 degrees. I will now show the same room with an angle of 60 degrees. Is it possible to change the angle of view of 3D with existing objects in it or what I need to re-create the room with a different view angle each time? Can I change the numbers in perspective to define and changes to the grid, but the House does not seem to change with it.

  Thanks, Conny

  the perspective grid is just a load of directives fantasies. It does not affect what you draw after one more as a similar grid drawn on paper could.

• Point of view in Photoshop has terrible quality.

  Im trying to avoid using GIMP to Photoshop but one thing I noticed right away that the bat is the view port seems TERRIBLE. When I import the same image in both programs, GIMP does a much better job displaying the image while Photoshop empty. There must be a setting for this somewhere, but I don't know what to do to solve this problem.

  Here's what I'm talking about.

  Dropbox - Gimp_Photoshop_Compare.png

  Any help would be good.

  Just go in Edition > Preferences > transparency & Gamut and colors change from your grid in the middle and you should have the same point of view...

  

• ColdFusion 9.0.1 vs 9.0.2 from the safety point of view - is a required upgrade?

  Hello

  I have ColdFusion 9.0.1 (Enterprise edition) installed, with 4 fix Cumulative and Security Patch APSB13 & 27 applied to this subject. Details of current version is present as below:

  Version: 9,0,1,274733

  Update level: hf901 - 00010.jar

  My question is, is an update of version 9.0.1 9.0.2 really necessary from a safety point of view? 'Truth' is not a problem for me, because I don't think that I use, and the presence of truth is not a problem either.

  Are 9.0.1 with the above security updates and the version 9.0.2 with security updates the same from a security point of view, or to win greater security if I update to version 9.0.2?

  Thank you

  Arun

  Hi Arun,

  There is no mandate to go to CF 9.0.2. As ColdFusion 9.0.2 update is a sum of ColdFusion ColdFusion 9.0.1 fixes cumulative 1 and 2 9.0.1,, all 9.0.1, without truth ColdFusion security patches so you get the same security updates in version 9.0.2 which exist in version 9.0.1 but without truth but there is a JVM update

  You can check the changes mentioned in the CF 9.0.2 release notes: http://helpx.adobe.com/coldfusion/release-note/coldfusion-9-0-update-2.html

  There was a fix for CF 9.0.2 version can be found here: http://helpx.adobe.com/coldfusion/kb/cumulative-hotfix-1-coldfusion-902.html

  The last update for CF 9.0.1 is http://helpx.adobe.com/coldfusion/kb/coldfusion-security-hotfix-apsb13-27.html

  Check this article as well: http://www.carehart.org/blog/client/index.cfm/2013/8/19/understanding_ColdFusion_9.0.2_a_F QA you will find this article very useful

  HTH

  Thank you

  VJ

• Look an OSX 'point of view to portrait"not"view of landscape ".

  My Air 11 '' has a screen that is up 5 5/8 "and 10" wide.

  This is not a screen ideal for reading a document, if you are looking to him normally, but if I had to rotate and read the book with the WIDTH being 5 5/8 "and 10" HEIGHT, would be perfect. of course, I have to hold the computer in this way while I was reading, but I would try this.

  is there such a feature that would allow me to test this out. interested in native or third-party options.

  Thank you

  Look an OSX 'point of view to portrait"not"view of landscape ".

  If you use only the MacBook Air screen it's doable, but it's hard to return to the normal display.

  Try this (works) in El Capitan:

  1. Launch of system in the Apple  menu preferences.
  2. Command-Option-click on the "View" icon
  3. On the right side of the display preferences, search for the "Rotation" menu dropdown visible again.

  

• Wallpaper from the point of view does not work on the iPhone 6

  Hello, I tried to set a wallpaper wallpapers apple and camera and my point of view option is disabled. And tried the hard reset and software update.

  

  Make sure that the settings > General > accessibility > reduce Motion is set to Off.

• A point from view of security that I don't want to let Adobe flash in my safety net, but whenever I hit the box saying not to allow him to box keeps arise, really frustrating.

  From a security point of view, I don't want to not allow Adobe Flash in my democratic security but whenever I hit the sayinf box not to allow that box keeps popping up even though I tell him permit.  Very frustrating.

  In Internet Explorer, go to Tools / Internet Options / Security / Restricted Sites and add the Adobe site sends you this popup (or add all adobe).  To block messages, even as pop-up windows.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry Q10 how do I change BBM Contacts list view to "list"?

  My friend used BB Q10, she can't find any option to change BBM Contacts list view to 'list '. Can anyone help? Thank you.

  When you are in the list of BBM contacts, further down from the top, you can see "Settings" in the upper right. Touch it and then scroll down to "Contact Layout".

  Here you can choose between 'Grid' or 'list '. Choose 'list '.

  If please post if it works for you or not. Thank you.

• In windows media player, cannot change the album art view in the list of music icon.

  * - Original title - in windows media player, I can not change the album art view in the list of music icon...

  I recently deleted a lot of my music library, the Media Player (not while in the music folder in my library, but all using the MP). but now, in the classic view (and when I click on an album cover to view follow-up for an artist or album), it will only allow me see the tracks/albums with expanded tile or Details views we don't let me use the display of the icon; Indeed, this listening option is grayed out. I don't know what I did, but before that I deleted the music I could see the icon display in the library. Can I fix somehow?

  Here's how I put it in an e-mail to a friend, maybe the problem is clearer in this way:

  Very well - so the other night, I did a purge in my music folder, deleting a lot of tracks how much I did not listen. I was doing this WMP. Now, the default view in my WMP since always the view icon, with the great icons of the album covers next to the track. (large, compared to other views) But now, I can't get that discover more, not when I'm looking for the titles of music st - only when I look by Album, artist, Genre or year. In the opinion of music suddenly the only options I been authorized were expanded tile and details - icon option is grayed out and the purge he was not! I looked in the WMP folder in Program Files and there was a folder called icons; It was empty. I had never watched there before; so I don't know if this is normal or not. How can I fix it? I remove and reinstall WMP?

  Had the same problem and you probably already figured out the answer, but it's here... Media Player 12.

  HERE a THE FIX... go to the top near the top of the media player window and directly to the left of the search bar in the media player is a drop down for the choice of the view menu. It is somehow changed to "Détails" view in the mine... CHANGE "Expanded Tile" view and your icon appears again in the Middle as I had initially.  ;)

• Display the text and the image on the camera's point of view using blackberry OS 5

  Hello

  I'm creating an application, which contains the label and the image on the camera's point of view. When I start the camera, that time itself the label should display on the top and the image should appear on background. I tried. but I got only for OS 7.

  http://docs.BlackBerry.com/en/developers/deliverables/36449/Display_text_on_live_camera_feed_LabelFi...

  But I need the OS 5. Is this possible in OS 5? Please give me an idea.

  Thanks in advance.

  That is right. Drawing on the display window is only available from 7 OS.

• Unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon.

  Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?

  The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

   

  Before troubleshooting, I have little information on the issue.

  1. did you of recent changes to the computer before this problem?

  Try the methods suggested in the article below and check after each method:

  Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

   

  Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.