Catalyst Control Center cannot be started

Similar Questions

• Re: AMD Catalyst Control Center cannot be started.

  13/08/15

  HP Pavilion

  HPE-350 t

  Core i7-860 2.8 GHz

  ATI 512 MB graphics card

  Win 7 64 bit

  I get the error msg... "Catalyst Control Center: Application host a Parisian of work."

  I am trying to access this part of a fix to win 10 do not install with the error msg... "Configuration modem host has stopped working".     Error Code C190011F

  New easy fixes for the error...   "Catalyst Control Center: the host Application has Parisians work?

  I have no problem I know.   What HP says:

  HP products - where to find Windows 10 drivers and software for my model?

  This document is for HP products that do not have software or updated drivers on hp.com for Windows 10.

• AMD Vision Engine Control center cannot be started

  I noticed that my apps, videos began to slow. I checked my AMD and it is said that "AMD Vision Engine Control center cannot be started there are not currently the parameters that can be configured using AMD Vision Control center."

  Help, please! WIndows 8

  Hi Norman,

  To provide the proper resolution, I would need more information on your side.

  1. where exactly can you find this error message? It is in Device Manager?

  2. that you get an error message while using applications or by listening to the video?

  3. facing this problem with all applications?

  4. What is the brand and model of the computer?

  Method 1:
  I suggest you to download and install the latest display drivers on computer manufacturer site and check if it helps.

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Satellite L850: Catalyst Control Center does not start

  Hello, I have an AMD 7670 m dedicated graphics card and when I install the AMD display drivers downloaded from the toshiba site, the Catalyst control does not start and he also seem to have problems with the usb ports and my wireless stops working for some reason any.

  Is that what I can do on it or am that I better use the downloaded drivers directly from AMD? Thank you

  Maybe stupid question now, but why do you need it? Have you been preinstalled OS with your laptop or you bought for laptop computer without an operating system preinstalled?

  What model do you have exactly (L850-xxx)?

• T400, cannot start the Catalyst Control Center - error 'GPU active not supported'.

  on a machine running vista business 64-bit current t400.

  last week all was hunky dory.  This week, when I try to open my ati catalyst (CCC) control center, I have the following error:

  "ATI catalyst control center cannot be started because the active gpu is not managed.

  I read a few posts on this problem from not using the ATI graphics card and being rather on the integrated graphics card.  indicate the positions I could reactivate CCC simply by clicking on the battery icon in the system tray and selecting "mode high performance" to force the machine to use the discreet graphics card.  After I do and then try to start the CCC, I get the same error as above.  at this point after switching to the mode high peformance, my device manager also lists "mobile Intel (r) 4 series express chipset family ' as my graphics again.  If I have left or right click on the battery icon in the status bar, I don't see any options for explicitly switching cards.

  the card driver intel 4 mobile is listed as being from ATI to version 8.520.4.4000.

  I'm not sure of my version of the driver for the ATI card.  and I don't know where to look for it.

  to my knowledge, nothing but a number of 'critical' windows updates have changed on my system between the time when CCC was working last week now.

  any suggestions on how to fix this?  and what it does to stop working?

  Thanks in advance for any help.

  I finally thought to it.  and no new drivers or relocations were necessary.  at the end of the day, all I had to do was turn on version lenovo Power Manager (which appear in my taskbar like a horizontal green battery with the number of minutes of use remaining).  from there I can left click and access the menu that has the switchable graphics option where I can choose the economy of energy or high performance.  If a from there, I select high performance, I can then open CCC.

  the important thing please note this is to access this menu, you must be using power management program of LENOVO thinkVantage (sticking the Green battery on your taskbar icon), NOT windows built in the power manager, which appears as a vertical grey/blue /? battery in the tray system (at least on mine).  Once you have, you can explicitly pass the graphics cards.

  the strange thing is, I had been accessing CCC without explicitly switching the cards without problem until last week.  so in a way that the default setting should of spent high-performance energy saving, thus putting me on the integrated graphic card unless I went it manually.  weird.

  slide, thank you for your help.  I appreciate it.  and it is an interesting note on freeing more memory by disabling the switchable graphics.  I'll probably this give it a shot and see how I like it.  memory is never bad!

  Thanks again to everyone who helped.

• Cannot configure graphics switchable + Catalyst Control Center has stopped working

  I have a hp pavilion 15 core i5 3230 M @ 2.60 GHz CPU processor running windows genuine 8.1 64 bit (version 6.2.9200).

  At first, I couldn't choose my Radeon HD M 8670 graphics adapter in the settings for my games and more recently, it has become worse now in the sense that I now get the following message appears when I try to configure graphics switcheble. "catalyst control center cannot be started. Currently, there are no settings that can be configured.

  Please I just bought this laptop for one purpose: Gaming. And his frustration that I cannot see the intel HD Graphics 4000, which is not enough to run my Microsoft Flight Simulator X. Please I need your help. I am average in computer science so please help me with the terminologies that are not too geek. Thank you and God bless.

  Emmanuel.

  Hello Cfm56pilot,

  Thanks for posting on the HP Forums!

  I understand that your CCC does not, preventing you to set your graphics card. I'll do what I can to help you with this problem!

  Normally, uninstall CCC, then your graphics driver is how to begin troubleshooting. Once they are gone, reinstall the graphics driver, then the CCC. I have seen this to solve this question several times. You can use HP Recovery Manager to reinstall the CCC and the appropriate driver. I'll give you a document containing the steps on how to do: use the Recovery Manager to restore the software and drivers

  I think the problem will be solved for these measures. Whatever it is, please provide your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario

• dv7t-6c00Quad installed Win8Pro (final version) & ATI Catalyst Control Center fails

  My laptop is the dv7t-6 c 00 Quad and I just installed the version of Windows8 Pro (I am a member of MSDN Developer).

  Everything went fine EXCEPT the ATI Catalyst Control Center does NOT work.  I tried to reinstall the graphics driver (sp55098.exe), but it won't work because it does not "meet the minimum requirements" (which I assume means that it has not been updated to handle Windows8.

  The result is that my system has become unstable. I guess that's because the control center would deal with switching between low power and high power/performance chipsets.  I noticed that this change can occur on the fly and seems to have with a web browser (Internet Explorer).

  It's REALLY BAD, because it crashes my system.

  Please respond and tell me that there is a SOLUTION NOW!

  * Notes: I tried to launch Catalyst Control Center and get this message, "Catalyst Control Center cannot be started.  There are currently no parameters that can be configured using Catalyst Control Center".  AAARGH!

  Tom

  It's the definitive answer to AMD.  HP must deliver the updated for my portable operarting under Windows8 Catalyst drivers.  I hope it will be soon.  In fact, I'd be happy to beta test.

  Here is the answer from AMD:

  Dear Thomas,

  Your service request: SR #{ticketno: [8200508926]} has been reviewed and updated.

  History of application of Service and response:

  As AMD only provides the reference for laptops drivers (provided as-is with limited support), sometimes our software is not compatible because changes made to the graphics card from the laptop manufacturer to improve stability and performance in the laptop. The error you receive indicates that the Radeon card in your laptop is incompatible with our drivers, since the manufacturer of your laptop has changed the Radeon card enough such that our drivers will work with your product. As such, you will need to contact HP for pilots and support to download and install. We will have all the drivers for your system that will be compatible, you will be forced to go with HP. We apologize for any inconvenience this might cause.

• First pro start anymore since the AMD Catalyst Control Center update

  I'm working on a laptop DELL PRECISION M4800.

  There are two graphics cards: AMD and Intel.

  After the AMD Catalyst Control Center software update, PREMIERE PRO starts plu. He cannot find the graphics card.

  Hello

  I disabled in Device Manager, but I couldn't pay my screens.

  Finally, I removed the AMD update to return to the previous version.

  It works again.

  Sorry for my bad English...

  Thank you cc_merchant and Rio

  Eric

• Cannot remove the Catalyst Control Center

  Original title: Catalyst Control Center

  I want to uninstall my CCC, but unfortunately the CCC Install manager has been uninstalled by mistake.

  I can uninstall the CCC with on the Installation Manager, or I can re - install the Manager of the facility on its own to allow me to do the uninstall.

  Hi Nick,

  1. What is the error you received when you try to remove the Catalyst Control Center?

  2. What is the brand and model of the PC?

  Catalyst Control Center is ATI so check with the ATI support, their documentation online
  and drivers and ask in the Forums of ATI for known issues.

  In addition, you can try to reinstall the CCC and then check if you receive an error message.

  If you are unable to remove the CCC, and then run the Fixit.

  The problems that the programs cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall/en?WA=wsignin1.0

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  Hope this information helps.

• UNABLE TO START THE CATALYST CONTROL CENTER

  I CAN'T START THE CATALYST CONTROL CENTER

  Before I was using vista and everything worked fine, but when I installed win7, I wasn't able to run the program again and as a result, I can not the LCD TV as my second "monitor", or duplicate. Under display settings, there is only my monitor, so I can't change anything. I ve also connected my PC and my TV with an HDMI-HDMI cable, and on vista, I've had no problems, but now he doesn´t detect the cable. I think that's it.

  THX

  If in CCC, you go to Desktop & views, then click on detect displays, what happens?

  If this does not work I download latest CCC, uninstall the old CCC then install new CCC.

  Your monitor not detected needs a specific generic driver instead of PnP? If so, download and install that too.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Error stopped work catalyst control center, shortcuts to desktop and start menu programs missing

  Original title: renovation catalist control center does not work

  I have a next message that catalist control center has stopped working. Al my desktop shortcuts are missing. They also have dissapeard since the program started.

  Hello

  1. What is the full error message?

  2. when exactly you get this error? It's trying to open all programs/applications?

  3. have you made changes on the computer before this problem?

  This error for the Catalyst Control Center is related to the graphics card installed on your computer, you can check with the manufacturer if there are any updated drivers for the graphics card, which must be installed to deal with the issue.

  Method 1:

  You can try to download and install the latest graphics drivers for your computer. You can see the following link.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Step 1:

  You can start the computer in safe mode. Check out the following link.

   Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the computer works properly in safe mode, then you can perform a clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 3:

  You can run the fix - it from the following link.

  Difficulty of broken desktop shortcuts and common system maintenance tasks

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 4:

  You can read the following article.

  Desktop shortcuts disappear in Windows 7

  http://support.Microsoft.com/kb/978980

  I also suggest you to give us the observer event logs.
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

• Catalyst Control Center will not be open, with the error

  Hello

  I have a HP Pavilion dv4-3030TX laptop with Windows 7 x 64 and I'm trying to access my video card settings in the Catalyst Control Center. Whenever I try to start the program I get the error message: could not load file or assembly ' CLI. Implementation ' or one of its dependencies. The system cannot find the specified file. »

  I have erased all traces of the completely with Driver Sweeper, in Mode safe driver and then reinstalled with the SoftPaq, but I still get the same error later. A note: when I finished the installation of the graphics driver, the Installer gives me a warning that there is at least an error during the installation of the driver and gives me a button "View log", but this button doesn't appear to do anything. I searched for the newspaper myself but I have not found one.  I hope someone can help.

  Try to uninstall the fomr Catalyst Control Center and driver within programs and have section of the control panel. Once you have done this, restart your computer and try to reinstall it

  

• Message: Follow-up to Catalyst Control Center has stopped working

  Why my computer keep telling me that followed by Catalyst Control Center has stopped working: search online for solutions?

  Hello

  Check with Support ATI, their drivers and documentation online and ask in their forums
  for problems known. Update or reinstall the ATI drivers.

  Download the Catalyst Drivers here
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ===============================================================

  Other troubleshooting methods:

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

• Catalyst Control Center stopped working - error CLR20r3

  Hello

  I recently bought a game, Armed Assault, which is not a whole new game and my Satellite (I'm sorry, but I don't know exactly which series) has the requirementes right good graphics system.

  I know that the GPU of my graphics (ATI Radeon 4200 Mobile) is not the best, but I had to do the graphics as low as possible to get a stable framerate.

  So, I wanted to find the graphics card with the Catalyst Control Center settings... but this no longer works, it just does not start and says that there is an error CLR20r3 and that the Application has stopped working.

  It's not bad for me, but I was wondering if I can change all the options or something like that to make the fastest GPU / more effective?

  Hello

  CLR20r3 error can be caused by damaged registry entries
  I would first recommend setting the BONE at the beginning point of time before this error appears
  Use the internal tool to restore the system Win 7.

  If this does not work, uninstall the graphics card ATI catalyst and .NET framework system.
  Then install the CCLeaner and clean the system and the registry.
  Reboot several times run CCLeaner once more and install the software deleted once more.

• Re: Satellite A300-1LT - impossible to install the ATI catalyst control center

  I can't install sound pretty boring - ATI catalyst control center. To be honest, everything works fine without it, but in a few days, I'll get HDTV, so I thought why not install now to check the options in it. I installed the latest versions of ATI drivers, choose the right system (vista 32 bit), but for some strange reason, I do not see anywhere, not in the start Panel, not in c-program files-ati tehnologices where its supposed to be installed.

  As I sad, I have no problem with my grapfic card, I just wanted to be able to play with the scope setting resolutions when my TV is used.

  I have the ati 3470 graphic card.

  Hi Hrvoje

  If I understand you right, you use now non - Toshiba ATI display driver. Am I right about that?
  I mean I don't think that Toshiba offers several versions of ATI drivers for your model laptop.

  Where you Born these drivers? On the Toshiba download page?