UNABLE TO START THE CATALYST CONTROL CENTER

Similar Questions

• T400, cannot start the Catalyst Control Center - error 'GPU active not supported'.

  on a machine running vista business 64-bit current t400.

  last week all was hunky dory.  This week, when I try to open my ati catalyst (CCC) control center, I have the following error:

  "ATI catalyst control center cannot be started because the active gpu is not managed.

  I read a few posts on this problem from not using the ATI graphics card and being rather on the integrated graphics card.  indicate the positions I could reactivate CCC simply by clicking on the battery icon in the system tray and selecting "mode high performance" to force the machine to use the discreet graphics card.  After I do and then try to start the CCC, I get the same error as above.  at this point after switching to the mode high peformance, my device manager also lists "mobile Intel (r) 4 series express chipset family ' as my graphics again.  If I have left or right click on the battery icon in the status bar, I don't see any options for explicitly switching cards.

  the card driver intel 4 mobile is listed as being from ATI to version 8.520.4.4000.

  I'm not sure of my version of the driver for the ATI card.  and I don't know where to look for it.

  to my knowledge, nothing but a number of 'critical' windows updates have changed on my system between the time when CCC was working last week now.

  any suggestions on how to fix this?  and what it does to stop working?

  Thanks in advance for any help.

  I finally thought to it.  and no new drivers or relocations were necessary.  at the end of the day, all I had to do was turn on version lenovo Power Manager (which appear in my taskbar like a horizontal green battery with the number of minutes of use remaining).  from there I can left click and access the menu that has the switchable graphics option where I can choose the economy of energy or high performance.  If a from there, I select high performance, I can then open CCC.

  the important thing please note this is to access this menu, you must be using power management program of LENOVO thinkVantage (sticking the Green battery on your taskbar icon), NOT windows built in the power manager, which appears as a vertical grey/blue /? battery in the tray system (at least on mine).  Once you have, you can explicitly pass the graphics cards.

  the strange thing is, I had been accessing CCC without explicitly switching the cards without problem until last week.  so in a way that the default setting should of spent high-performance energy saving, thus putting me on the integrated graphic card unless I went it manually.  weird.

  slide, thank you for your help.  I appreciate it.  and it is an interesting note on freeing more memory by disabling the switchable graphics.  I'll probably this give it a shot and see how I like it.  memory is never bad!

  Thanks again to everyone who helped.

• WARNING: The Catalyst Control Center is not supported by the version of the graphics adapter driver you activated. If you please update your ATI graphics driver or enable your ATI card using the display manager.

  Original title:  Install the new NVIDIA GeForce GT 240 graphics card but now gets error message regarding the necessary to the old card drivers ATI Radeon.

  I just bought a new computer from AMD PHenom II quad core Dell Inspiron with Windows 7 installed. For the graphics card, an ATI RAdeon 4200 on it there but I wanted a more powerful card and installed a NVIDIA GeForce GT 240 graphics card. The ATI Radeon is not delete because honestly, I could not recognize what it should look like and thought that maybe it was incorporated. The fine installed NVIDIA card and now shows as the graphics card used by the computer Information System.

  My problem is that whenever I start my computer, I get an error message saying that the drivers for the ATI card are not compatible with the Catalyst Control Center. I think I need to disable the ATI card, but don't know how. Can you help me?

  Dell Inspiron 570 is a desktop computer, the ATI Radeon 4200 is an integrated graphics card chipset usually equipped with laptops. Something is not here.

  Go to dell support, enter your tag # and get the origonal system specifications.

  You can uninstall anything about ATI through Add/Remove dialog

• Cannot remove the Catalyst Control Center

  Original title: Catalyst Control Center

  I want to uninstall my CCC, but unfortunately the CCC Install manager has been uninstalled by mistake.

  I can uninstall the CCC with on the Installation Manager, or I can re - install the Manager of the facility on its own to allow me to do the uninstall.

  Hi Nick,

  1. What is the error you received when you try to remove the Catalyst Control Center?

  2. What is the brand and model of the PC?

  Catalyst Control Center is ATI so check with the ATI support, their documentation online
  and drivers and ask in the Forums of ATI for known issues.

  In addition, you can try to reinstall the CCC and then check if you receive an error message.

  If you are unable to remove the CCC, and then run the Fixit.

  The problems that the programs cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall/en?WA=wsignin1.0

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  Hope this information helps.

• Satellite A100-237: I don't have the Catalyst Control Center after the installation of the driver

  Hello

  I use a laptop Satellite A100-237. 1.83 GHz Core Duo, Ati Mobility Radeon X 1600 512 MB Hypermemory, 1.5 GB of RAM DDR2.
  My laptop seems to now use only the own 256 MB RAM (own RAM graphics card).
  I bought Need for Speed Carbon and installed on my laptop.

  When I tried to open the game, a blue screen appeared for less than 1 second and the system rebooted. Windows said it was a critical mistake and a stopped driver Windows XP for work, so the system is restarted.
  I searched on the net for this problem, and the people said that when they pilot updated the problem is resolved.

  I downloaded the 8.241 display driver (download file name: display_xp - 8241.zip) Toshiba - Europe.com.
  Driver installed, but when installing ATI Catalyst Control Center, at one time installation process continuing collapsed. I had to end the task after a while.
  He said that the driver is installed and system must be rebooted.

  Now the game works, which is not the problem, but I do not have the Catalyst Control Center. (Where I recently use to connect other screens to my laptop)
  How can I solve this problem?

  Sorry for the long letter,
  Thanks for the help.

  Hello

  As suggested above, you can try to restart the installation but I guess that you will not be able to install the graphics driver of ATI origin on the manufacturing site.
  You can try to use the omega site ot driver drivers Toshiba orginal...

  @aportakal
  Anyway, the ATI MOBILITY RADEON X 1600 is not a memory sheared graphics card and this is why this card does not use the part of the main memory. It supports a 256 MB own memory.

• Pay attention to the catalyst control center monitoring program does not work

  computer keeps displays the warning that monitoring program, catalyst Control Center does not work - what is it

  Hello

  ·         Did you make any changes before the show?

  ·         What operating system is installed on the computer?

  I suggest that you download and install the Catalyst Control Center from the AMD website and check if it helps.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• the Catalyst control center host application has encountered a problem

  the Catalyst control center host application has encountered a problem and needs to close

  Hi Chowder53,

  1. did you of recent changes on the computer?

  2. When you receive the error message?

  That would happen if the card drivers to display on the computer must update or corrupt.

  I suggest that you manually download and install the latest drivers for the display card on the display card manufacturer's site, check to see if it helps.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• using win vista sp2 64-bit overpriced home, the catalyst control center host application has stopped working

  Using windows VISTA Home overcharging sp2 64-bit, the catalyst control center host application has stopped working

  Hello

  You will need to download the correct drivers for the graphics card. You can also contact the manufacturer for assistance on this issue.

  Support for drivers &

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• Getting error while booting: "the Catalyst Control Center is not suppoerted by the version of the driver for your current graphics card.

  Original title: error message

  Whenever I turn on my computer (Windows Vista) I get the following error: "the Catalyst Control Center is not suppoerted by the version of the driver for your compatible graphics card. Please update your ATI graphics driver or enavle your ATI card using the display manager. "How can I do this? and do I do this?

  Hello

  Update the driver may solve the problem. See the following article to install/update the drivers.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also download the drivers from AMD. Choose the appropriate brand and model of the device and download the drivers.

  http://support.AMD.com/us/gpudownload/pages/index.aspx

• Microsoft NET Framework 3.5 is required to run the Catalyst Control Center.

  Warning message

  Microsoft NET Framework 3.5 is required to run the Catalyst Control Center.
  Please download and install the wedsite of Microsoft software.

  Hi LAMWah KA

  
  I suggest you to download and install the .NET Framework 3.5 Redistributable or .NET Framework 3.5 SP1, then check if that helps you solve the problem-

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=e3821449-3c6b-42f1-9fd9-0041345b3385&displaylang=en

   

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=AB99342F-5D1A-413D-8319-81DA479AB0D7&displaylang=en

   

  I hope this helps.

• The Catalyst Control Center error message

  I had difficulties to show online flash videos so I upgraded my intel graphics card from Intel HD Graphics 3000 on the Intel site. Since then, I get this message:

  "The Catalyst Control Center is not supported by the version of the driver for your compatible graphics card. Please update your graphics driver from AMD, or activate your card AMD using the display manager. »

  I tried to update the graphics card (Radeon HD 7470 M) AMD but it says that is already updated to the latest version and looks like it has been activated. When I clicked on the graphics card I get this message in the device status:

  "Windows has stopped this device because it has reported problems. (Code 43). »

  I use:

  Product name: HP Pavilion dv6 Notebook PC

  Product number: A7P58EA #ABU

  Windows 7 Home Premium 64-bit Service Pack 1

  Hello ladyv128.  I understand that you are having problems with your graphics card.

  Try to install this version of the AMD driver, and then restart your laptop.

  I would like to know the result and have a wonderful evening!

• My computer is screwed. I suspect a virus called the Catalyst Control Center.

  My screen is black, all my icons disappeared and my computer is very slow. I get a message titled "Catalyst Control Center, your application has stopped working". I read in this forum that all I had to do was change my hidden catalyst control center to no hidden. I did it. My catalyst control centre is spelled in America. The message I get is spelled in British English. What should I do? I'm being attacked by a virus that my recently updated Anti-malware can't catch?

  Hi Susannah,

  Could you try to start the computer in Safe Mode? Then read this article
  See you soon ~

• The boxes checked in the Catalyst Control Center settings, now monitor not in the range of scan.

  I changed the graphics card settings to force dectet for a television or other display media and rebooted my computer. After starting at the top, it shows the Windows XP loading screen, but before he gets to the login screen, my screen goes black and displays the message 'Out of Range of Scan. How can I solve this problem because I can not even in the control center to change the return parameters?

  I still have an old evaluation copy on another hard drive in the computer to access the files of XP discs. But I have no idea how to go about changing the settings or restart them.

  I am quite upset and that you want to Pierce my turn, so help before that will be greatly appreciated.

  I went into safe mode and has a system restored on the eve of the day when I made the changes.

  My problem is solved.

• Is the Catalyst Control Center Launcher (CLIStart.exe) a program of legitiimate?

  markmaerz, it seems to me as there is no answer in this whole world and perhaps in the entire Galaxy that would make you Happy so if I were you, I would just pick up the phone & call center of local Service in your area, the next time you have PC problems & let these poor men & innocent woman who are online day & night trying & actually succeed to provide information useful to thousands on the thousands of people, WORLD WIDE, free of charge & on their own time, leave them ALONE!                                                                                                                                                                                                                                                                                                                                                                                                                                                              GOOD DAY SIR,

  LGeorge_1965

  No this isn't a Microsoft program. Yes, it is a legitimate program for your graphics for advanced graphics card. It is a product of ATI/AMD. I hope that answers your bloody Question.

• I try to install the Catalyst Control Center drivers. I get an error saying that I can only run this administrative only mode. I am the only account and always the administrator value. How do we install? Is CD and downloaded the drivers from the website a

  How can I install the drivers if I'm still in administrative mode? Is there a setting to turn off somewhere?

  Hi pfunk20000,

  Thanks for posting. Hold Left Shift and right click on the installer of catalyst and select "run as". From there, you can select administrator. Set the local administrator password and it should install without any problems.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think