Category data can be displayed on a selective basis?

Similar Questions

• The date can be displayed in newspapers timesten

  Hello

  The Date can be included in newspapers timesten, i.e. in the files ttmesg, tterrors, ttcwmesg and all the remaining log files

  Concerning

  Siva kumar

  Siva,

  Add the following entry in/var/TimesTen /ttendaemon.options and restart the service timesten.

  -showdate

  This will include the date in the log files.

  Kind regards

  Maytal Priya

• How can I get the data view to display the same amount of time I save?

  I use the Sound and Vibration Measurement Suite.  In the data view, I display a graph of time, the power spectrum, the Color Map and the waterfall.  I am also showing strength in numbers group for several bands and doing cutting-edge research.  I record 100 ms of the transient wave.  In the data view, why the temporal plots show several seconds of data?  What determines how much time will appear in the data view?  More important, the power spectrum reflects the power for the entire of several seconds of data displayed?  Same question for power in the values of band and cutting-edge research.  I want to just this data displayed for 100 ms of the wave that I record.  So, how can I get the data displayed (waveforms) and power numbers come only 100 ms of the recorded wave?

  Finally, what is the best way to make account concisely the recorded data?  By slide numbers on the Documentation tab is not concise, because it comes with graphics, etc..  I tried save as ASCII/LVM, but I get a bunch of stuff intermiated I don't care.  Help?

  Hi TimRsandiego,

  SignalExpress is programmed to display graphs with default scales based on the type of action, it's reading. These scales and settings can be changed by right-clicking on the graph, and then select Properties.

  If you are interested to learn more about how to use SignalExpress, I would recommend checking out some demonstrations/tutorials on NI.com. You can find some of these demos at the following location:

  Let me know if you have any other questions.

  Kind regards

• How can I display the time of the data stored in a file using labview?

  How can I display the time of the data stored in a file using labview?

  Hi Matt,

  I think that we will need a little more information as to how you capture the data, what data you capture, etc.

  If you capture a waveform, is to extract the time data waveform which includes the t0 and dt values, so you can understand the time stamp of a specific data point as in the image below.

• When I maximize a window I can't display the date in the lower right. Why?

  When I maximize a window I can't display the date in the lower right. Why?

  With what application window, you are facing this problem?

• Data field Image display LR

  In the upper left part of the screen, there is a data field that can be seen for each image, I know there are a few options to change this data field to display the news more or less, or not at all, I did it in the past, but for the life of me can not find a way to do it again . If anyone can help? Thanks in advance for your help... jp

  

  Right-click and select Display Options.

  You can scroll the options you have selected by pressing the i key.

• Re: Satellite L300 - 11G - Configuration and other data is not displayed

  Hello. I have XP on my computer and I have problem with wireless card.
  All drivers are kept for the card but in the configuration utility of the wireless MAC address client and other data are not displayed.

  Can someone help me?

  Hello!

  To be honest I don t understand what you want.
  Maybe you should explain this better.

  The configuration as the IP address and MAC address, you can see in the command line. Start-run-cmd-ipconfig/all online online online

  Good bye

• How can I display a variable evolution in a Subvi on the face before of the main vi as the Subvi is excuting

  In the attached document the vi on the right is sub to the vi on the left. On the Subvi on the right of the variable "playing field" is continuously updated on the façade of the Sub - VI as the loop 'for' is executed, but only the last value of the variable is updated in the table main before vi which is what is expected. My question is how can I display the evolution of the value of 'Playing field' on the main façade of vi that the loop 'for' in the Sub - VI is running?

  Thank you.

  I don't have the drivers you are using. But here's an example of how update an indicator of a Subvi. To create the reference control in the Subvi, select control refnum in refnum palette and drag a numeric (or other) on the refnum control.

  VI the appellant

  

  Subvi

  

• Garmin titles can be displayed in bing maps

  Garmin titles can be displayed in bing maps?

  Hello

  Check with Garmin and Bing and Forums support.

  Garmin - Support
  http://www.Garmin.com/us/support/

  Bing Maps
  http://www.bing.com/maps/

  Bing Maps
  http://www.Microsoft.com/maps/developers/Web.aspx

  Bing Maps - Community Forums
  http://social.msdn.Microsoft.com/forums/en-us/category/BingMaps

  Bing - Support
  https://support.DiscoverBing.com/default.aspx?mkt=en-us&ProductKey=binglocal&brand=&&CT=eformts&scrx=1

  Bing - developers and partners
  https://www.Microsoft.com/maps/

  Bing - FAQ
  http://www.Microsoft.com/maps/product/FAQ.aspx

  Additional support could be found in these forums:

  Bing Forum
  http://www.bing.com/community/f/

  MSDN - Bing Forum
  http://social.msdn.Microsoft.com/forums/en-us/bingmapsservices/threads

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• JPEG image is displayed in the selected image files folder

  When the discovery of the computer and selecting the image file folder - I use to get the small real individual images of each image in the folder without having to enter in the Windows Photo Gallery.  Now, I have only an icon, the same as that for each of the images and the only way I can see that the actual image is to select a specific icon and hope that is the image I'm looking for.  Can someone tell me how I can get all the individual photos in the folder of image file to display when I select that folder?

  Hi looking, advanced

  Thank you for visiting Microsoft Answers.

  I first suggest you to change the display of the photo icons folder type medium or large icons and check if that helps.

  To do this, follow these steps:

  Open the photo folder. Click view > select icons medium or large icons.

  Make sure that default programs > associate a file or protocol type with a program, file types .bmp, .ico, DIBs, .jfif, .jpeg, .jpe, .png, .png, .tiff, .tif, .wdp file names must have the default program like Windows Photo Gallery.

  Otherwise, select the type of file name, click on change program and browse to choose as default Windows Photo Gallery.

  Additionally, set the global folder options

  To specify the global settings that apply to all folders, follow these steps:

  1. Click Start, click Control Panel, and then double-click Folder Options.
  2. On the general tab, click the options you want.
  3. In the view tab, click the options you want.
  4. Click OK.

  Note To restore the default settings for all folders, click restore defaults on the general tab or on the view tab.

  Use the same display settings for all folders

  You can apply the same view settings to all folders on your computer. You cannot apply the same view settings for all folders, images icons, toolbar settings or tasks folder. To apply the same view settings to all folders, follow these steps:

  1. Locate and open the folder which includes the display setting you want to use for all folders.
  2. On the Tools menu, click Folder Options.
  3. On the view tab, click apply to all folders.
  4. Click Yes, and then click OK.

  Note To reset all folders to the default display settings, repeat these steps, but click reset all folders in step 3.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• As of the field Date is not displayed

  Hello

  I have a date custom field where I have to select a date. I used it for the touchscreen. Now I want to implemnt it in no touch. But to not touch, I am able to select the date, but it does not appear in the field. I used a flag that I've initialized as false. I write a method like below:

  public String getDateFromPicker() {
          String format = "MM/dd/yyyy";
          SimpleDateFormat dt = new SimpleDateFormat(format);
          String date = dt.format(new Date(getDate()));
          if (flag ){
              return date;
          }
          else{
  
              return "";
          }
      }
  

  For the touch screen, I used the code to enter the date below value:

      protected boolean touchEvent(TouchEvent message) {
          flag=true;
          return super.touchEvent(message);
      }
  

  In Touch no I used the code instead of the above code below:

    public boolean keyDown(int keycode, int time)
      {
          if (Keypad.KEY_ENTER == Keypad.key(keycode))
          {
              flag = true;
              return true;
          }
          return super.keyDown(keycode, time);
      }
  

  But it still doesn't work. I use 8900 Simulator for Non touch and 9530 for touch. And I'm on BB OS 5.0.0.

  Please help me...

  Hi simon,.

  After a long period of time. I solve this problem. In fact, I used this indicator due to the means of display mode when its value is false, then the date is not displayed.

  I solved it by using the NavigationClick() method.

  Thanks for your time.

• While the data activity indicator display is recharging of Webservice

  Hi guys,.

  How can I display an indicator of activity while the data or recharging of Webservice?

  Currently I used Timer to set the agenda.

  Thanks in advance.

  Concerning

  Hey,.

  You can make it visible when you start the application, and on the function of earphone Event.COMPLETE, you can configure it to hide the indicator. hope that helps. Good luck!

• BlackBerry: Data not fully displayed in the screen of BB (version 5.0 Operating System/down) tested on BB bold3

  I have developed an application and it works well on OS6 (OS 6 fat for example 5) but does not work well on OS5 (OS 5.0 or less fat for example 3). The main problem is that I have data via JSON and displays several labels on the screen to display the data. According to the content received via json data can be large, but the main problem is that vertical scrolling does not allow the user to scroll down beyond a certain point. This fact I wonder if the screen in OS5 have little content allowed to shoot her. code snippet below.

  JSONArray json = new JSONArray(result);
  
  for (int i = 0; i < json.length(); ++i)
  {
      JSONObject moleculevalue = json.getJSONObject(i);//get the json data object
  
      String tdescription = moleculevalue.getString("Total Description");
  
     if (tdescription == "") tdescription = "Not Applicable";              
  
     _fieldManagerMiddle.add(new SeparatorField());
     _fieldManagerMiddle.add(new LabelField("Description: " + tdescription, Field.FIELD_HCENTER));
  
  }
  

  Data still exist, but the user cannot scroll under the view of the screen.

  Can someone tell me a work around for this and, possibly, of the reasons for this. Thanks in advance.

  No need for any ZIP code at the moment, as I suspect the issue here is the lack of focusable fields.  Default LabelField is not active.  This can restrict scrolling especially on non touchscreen devices.  This isn't an OS related issue, but touch no touch verses.

  Two suggestions before the validation code:

  (a) to make active the LabelField

  _fieldManagerMiddle.Add (new LabelField ("Description:" + tdescription, Field.FIELD_HCENTER |)) LabelField.FOCUSABLE));

  (b) add a NullField after the LabelField

  Let us know how you go with it.

• Add the data in a field of multiple selection?

  Just got got off the phone with the support of Eloqua ask about the possibility of adding data in a field of multiple selection over time. Apparently, it's possible through mailings of form, but no list will be mailed.  Wouldn't be great if during a download list, you had the ability to add data from a field in your file .csv for existing values in this area in Eloqua.  Here's a use case for this scenario... in our society of industry can be part of multiple market segments.  Depending on the event, a person can feel they are part of the market segment 'Radar', but another event specializing in Sonar... they indicate that they are part of the market segment "Sonar", both being true.  There is currently no easy way to enter these data in Eloqua over time as part of the downloads from the list.  Based on the scenario above, the existing value is 'Radar', but if "Sonar" is the value of the field for the next download it replaces the value of 'Radar '.  Ideally, we would be able to capture the two values.

  I said that if there is enough interest in this idea, Eloqua would consider developing a new option for downloads from the list add vs crush.  I hope others can find a use case for this idea.

  Hi Tina,

  I know it's a bit old but I had a simular problem on adding values to a multi select.  Here's how I approached it.

  1. Add a text based contact field Eloqua to transfer your csv values.  Let's call it "MultiSelect download Value" for this example.

  2. Add Eloqua add values to a multiselect contact field.  What we'll call "MultiSelect Final.

  3. create a program that will add the download list.

  4. in the program, create a step to update Contact data

  . in the update rule, update "Definitive MultiSelect' field, Append the value in the field value, value will be hardcoded, check use a delimiter": ", marks the conditional rule the field" value to download MultiSelect "equals the value hard coded or one that you would like the field to be.

  b. create all update settings you need for your data.

  I approached this way because our downloads from the list should be add the data over time.  The field ' value to download MultiSelect ' allows it to be overwritten on each download.

  Let me know if you want more details.

  Thank you

  Blake

• Can we display the content stored in the portal?

  I've archived some documents from the University Complutense of MADRID and have deleted their revisions. If the archived content (which I think is recorded in the main server of the University Complutense of MADRID) can be displayed on the portal?

  
  

  Hello

  All content elements that are in the server content and status = released can be viewed / consumed from any other application. Materials that are archived are still on the server (until and unless "Delete after export" is not selected). How to archive / make a backup copy.

  I hope this helps.

  Thank you

  Srinath