While the data activity indicator display is recharging of Webservice

Similar Questions

• How can I get the data view to display the same amount of time I save?

  I use the Sound and Vibration Measurement Suite.  In the data view, I display a graph of time, the power spectrum, the Color Map and the waterfall.  I am also showing strength in numbers group for several bands and doing cutting-edge research.  I record 100 ms of the transient wave.  In the data view, why the temporal plots show several seconds of data?  What determines how much time will appear in the data view?  More important, the power spectrum reflects the power for the entire of several seconds of data displayed?  Same question for power in the values of band and cutting-edge research.  I want to just this data displayed for 100 ms of the wave that I record.  So, how can I get the data displayed (waveforms) and power numbers come only 100 ms of the recorded wave?

  Finally, what is the best way to make account concisely the recorded data?  By slide numbers on the Documentation tab is not concise, because it comes with graphics, etc..  I tried save as ASCII/LVM, but I get a bunch of stuff intermiated I don't care.  Help?

  Hi TimRsandiego,

  SignalExpress is programmed to display graphs with default scales based on the type of action, it's reading. These scales and settings can be changed by right-clicking on the graph, and then select Properties.

  If you are interested to learn more about how to use SignalExpress, I would recommend checking out some demonstrations/tutorials on NI.com. You can find some of these demos at the following location:

  Let me know if you have any other questions.

  Kind regards

• I have restored the laptop to factory settings, the product key sticker is faded... While the re-activation of it Microsoft office said "this is not a valid product key Office...". »

  I bought my laptop with microsoft office 2010 is installed. I restored my laptop to factory settings, the product key sticker is faded so I used jellybean keyfinder to get it. While the re-activation of it Microsoft office said "this is not a valid product key Office...". »

  What should I do to make it work again?

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010. Also using the value default key OEM SLP for Windows 7 does not work with Office 2010

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• retrieve the default activity indicator

  my default activity indicator has disappeared and I want it back

  Firefox displays the default activity since versions of Firefox 2 indicator. He is sitting in the Customize Palette, you need to go where you want.

  https://support.Mozilla.com/en-us/KB/how+to+customize+the+toolbar
  
  http://KB.mozillazine.org/Toolbar_customization

• When I export the report to EXCEL files and filter the data, it will display incorrect data

  Hi experts,
  In OBIEE 11.1.1.6, when I export the report to EXCEL file and open this file to view all the data, it is correct.
  However, as the amount of data is so, so I add filter for each column (click on the sorting-> filter filter)
  When I select data in the filters, I'm afraid that I find the value of 'White' in the last line in the filter area, but in the table, there no null data. Why? Are you facing the same issue?
  Secondly, when I select a value, it will generate a data line.
  
  For example:
  2008 - Region1
  -The region.2
  -Elle3
  2009 - Region1
  -The region.2
  -Elle3
  
  
  When I select 2008 data in EXCEL, it will display unexpected data, as below:
  2008 - Region1

  Exactly... If you export to the format you will not face question of null data or incorrect when filtered.

  Kind regards
  DpKa

• The date can be displayed in newspapers timesten

  Hello

  The Date can be included in newspapers timesten, i.e. in the files ttmesg, tterrors, ttcwmesg and all the remaining log files

  Concerning

  Siva kumar

  Siva,

  Add the following entry in/var/TimesTen /ttendaemon.options and restart the service timesten.

  -showdate

  This will include the date in the log files.

  Kind regards

  Maytal Priya

• Problem with the rule while the data is loading files

  Hello
  
  I'm having a problem trying to load data to an application that uses rules files. Load data files were from another application using the DATAEXPORT. I have two files for each entity. One is for the current year and one for next year. The source and target applications are different, so I do all the mapping using rule files.
  
  The data of the current year file contains data for CurrMonth:Dec & CurrYear. The following year data file contains data for Jan: Dec and the next. I made rules for each entity files load data into the application and has made the mapping when creating these rules files using set 12 months.
  
  The problem that I am facing is that I'm able to correctly load the following year in the target application, my rules file is the right month for each column mapping. But for the year underway, I have just 2 columns of data (whereas & CurrMonth = Nov) and so when I'm trying to load the data file using the rules file, it is to map the November and December months like January and February and charging at these months of FY11, which is false.
  
  I don't know how to solve this problem. The current year data file it will always change in terms of months then how can I modify the rules that he recognizes that the months are coming in and where to put the data.
  
  Please let me know your suggestions. Any help will be appreciated.
  
  Thank you!
  ~ Hervé
  
  PS ~ it was the same problem, I was faced with a few months back when I posted this question and I followed the advice in this post, but always faced to the question - DATAEXPORT and rules files
  
  Published by: Gwen on December 20, 2011 08:25

  Adella,
  We have faced a similar issue and we were able to solve it by sticking to these months dimension members (& currmonth: dec) and generate the header
  The export file created when paste us the dimension names in front of months on the export file
  Suppose that your export file is currmonth.txt and she Nov and Dec
  first line of your export file should look like this
  'Version' 'Year' 'Scenario' "XYZ" "123" "ABC" "Account", "Nov", "Dec".
  We have created a batch file to add this to the original export file, it looks like this
  Paste d "\0" Header.txt "D:\Hyperion\products\Essbase\EssbaseServer\app\xyz\123\currmonth.txt" > "D:\Hyperion\products\Essbase\EssbaseServer\app\xyz\121\currmonthchange.txt".

  Header.txt is a text file that it contains ("Version" "Year" "Scénario" "XYZ" "123" "ABC" "count")

  change your rules file so that it generates the header in your source (currmonthchange.txt)

  rulefile--> the properties of data source--> header--> data records source header--> recording containing the names of data filed charge (set 1)

  I hope this will solve your problem

• get the date field to display the time

  I have a date field in my form. I want to capture the date and time, but it let me only on the date of entry.
  
  How can I change this?

  In the field property, in a property called Data Type , it will be the DATE on your side replace DATATIME and set the format DD-MON-YYYY HH24:MI:SS then try...

  BTW Hi ;)

  -Clément

• HP SimpleSave 500 GB external hard drive is identified however the data is not displayed

  Hi, I have a HP SimpleSave 500 GB external hard drive. Till a month back I had copied, files, documents, mp3 etc in this player. And a few weeks back when I plugged it to recover some data on this subject, I was unable to see any folder in which I had copied the same. In the properties it shows to me that about 120 GB is used, which some how make sure that data are on it, however, due to an unexplained error, I am unable to see. Any help will be appreciated.

  Hi TinmanSav,

  Follow the suggestions below for a possible solution:

  Method 1: Run the hardware and devices Troubleshooter and see if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: I suggest you disable and re-enable the USB controller and check.

  Use Device Manager to disable and re-enable all the USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  To disable and re-enable the USB controllers, follow these steps:

  a. click Start, type "Device Manager" in the start search box and press ENTER.

  b. Expand Universal Serial Bus of controllers.
  
  Note: You need to scroll the list to find this point.

  c. right-click on the first USB controller under Bus USB controllersand then click Uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  f. check the USB device to see if it works.

  Method 3: Check if the external hard drive is recognized in disk management and assign a drive letter to the same.

  To open disk management, follow these steps:

  ·         Click Start, type disk management in the start search box and press enter.

  If the drive is detected in disk management, I suggest you to assign a drive letter and see if that does the trick.

  For instructions, see this article:

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  You can also check the external hard drive on another computer.

  Let us know if that helps.

• Impossible to obtain the data controls to display the browser of the application

  I installed JDeveloper version 11.1.2.3.0 on a Workstation Windows 7 (SP1). Once installed, I decided to try the [get started with the JDeveloper IDE | http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_50/jdtut_11r2_50.html]. After you have created "MyFirstApplication" I noticed that I couldn't see the accordion of data controls, as shown in the example. I decided to ignore it and continue with the rest of the tutorial, hoping he could enlighten us. No chance and ran into other problems that surround the stage 13, when I could not create a managed bean as illustrated in the example.
  
  So I went back to the first problem of the accordion of missing data control, suspecting that this may be part of the problem. I searched and found several issues here in the discussion that resembled the may be solutions to the problem and tried them all:
  (1) remove the system11.1.2.3.39.62.76.1 directory and restart JDeveloper = > nothing helped, still missing data controls
  (2) uninstall all versions of Oracle Middleware installed on the PC, removal of the JDeveloper user directories, restart and reinstall only the version 11.1.2.3.0 (there was also an old 11.1.1.4 version installed) == > didn't help, still missing data controls
  (3) made a new software download where jdevstudio11123install.exe has been altered somehow. Repeated step 2 = > nothing helped, still missing data controls
  
  I'm pretty much running out of options now, is there any other mystical step I missed that can work?
  I feel, I'm not the first to experience this problem, but I can't find a solution with the search function of this forum.
  
  Any help is appreciated.

  Try to open up JDeveloper from the terminal and see if there are errors. Also in the screenshot, I don't see that you have all the projects exposing DataControls, so create a java class and right-click on it, create a DataControl and see if this stage support the feature.

  Juan C.

• How to clear the field of the image stored while the data type is LONG RAW

  Assalam O alaikoum
  
  I have a table of LONG RAW data type field. I made a form on that table. and the images stored in this area to help after the program.
  
  DECLARE
  filename VARCHAR2 (256);
  BEGIN
  filename: = GET_FILE_NAME;--(File_Filter = > ' JPEG (*.)) JPG; *. JPG; *. JPE; *. (JFIF)');
  READ_IMAGE_FILE (filename, 'JPEG', 'work_order.article_image');
  END;
  
  And he stored images when I commit / saves the form.
  
  Problem:
  
  I want to remove the image from this specific record field. I don't want to delete the entire record, I don't want to replace the image. I want to only empty this field.
  
  HOW CAN I DO?

  +"... I don't want to replace the image. I want to only empty this field... « +

  Have you tried:

  Go_Item('image_item');
  Clear_Item;
  

  François

• increase the value of minute in 14 minutes, while the data is inserted into the table

  Hello
  
  I'm having the asp page that connects with the DB to insert values into the table. One column is date data type. Value from this asp page must be incremented to 14 minutes before be inserted into the table.
  
  How can I do this?
  

  sqlG="INSERT INTO AEMU " &_
                                                    " (MSISDN,X,Y,TIME_STAMP,REQ_ID, " &_
                                                    "  COUNTRY_G)" &_
                                                    " VALUES " &_
                                                    "('"& msid &"'," &_
                                                    "'" & X & "'," &_
                                                    "' " & Y & " '," &_
                                                    "to_date('" & Day(TrueTimeStamp) & "-" & MonthName(Month(TrueTimeStamp), True) & "-" & Year(TrueTimeStamp) & " " & Hour(TrueTimeStamp) & ":" & Minute(TrueTimeStamp) & ":" & Second(TrueTimeStamp) & "', 'DD-MON-YYYY HH24:MI:SS')," &_
                                                    "' " & req_id & " '," &_
                                                    "'" & CountryName_G & "')"

  Try this way:

  sqlG="INSERT INTO AEMU " &_
       " (MSISDN,X,Y,TIME_STAMP,REQ_ID, " &_
       "  COUNTRY_G)" &_
       " VALUES " &_
       "('"& msid &"'," &_
       "'" & X & "'," &_
       "' " & Y & " '," &_
       "to_date('" & Day(TrueTimeStamp) & "-" & MonthName(Month(TrueTimeStamp), True) & "-" & Year(TrueTimeStamp) & " " & Hour(TrueTimeStamp) & ":" & Minute(TrueTimeStamp) & ":" & Second(TrueTimeStamp) & "', 'DD-MON-YYYY HH24:MI:SS')+14/(24*60)," &_
       "' " & req_id & " '," &_
       "'" & CountryName_G & "')"
  

  Max
  [My Italian blog Oracle | http://oracleitalia.wordpress.com]

• Activity indicator for loading data model

  Hello

  I'm looking in using an activity indicator to show for my list view to load the user (as it takes 2-3 seconds to display list to be filled with data that it receives the files from my server).

  Here is my list view & data source:

  ListView {
                                  id: listView1
                                  dataModel: dataModel1
  
                                  leadingVisual: [
                                      Container {
                                          id: dropDownContainer1
                                          topPadding: 20
                                          leftPadding: 20
                                          rightPadding: 20
                                          bottomPadding: 20
                                          background: Color.create("#212121")
                                          DropDown {
                                              id: dropDown1
                                              title: qsTr("Date:") + Retranslate.onLocaleOrLanguageChanged
                                              Option {
                                                  id: all
                                                  text: qsTr("All") + Retranslate.onLocaleOrLanguageChanged
                                                  selected: true
                                              }
                                              Option {
                                                  text: qsTr("23/06/2014")
                                                  value: "23/06/2014"
                                              }
                                              Option {
                                                  text: qsTr("24/06/2014")
                                                  value: "24/06/2014"
                                              }
                                              Option {
                                                  text: qsTr("25/06/2014")
                                                  value: "25/06/2014"
                                              }
                                              Option {
                                                  text: qsTr("26/06/2014")
                                                  value: "26/06/2014"
                                              }
                                              Option {
                                                  text: qsTr("27/06/2014")
                                                  value: "27/06/2014"
                                              }
                                              Option {
                                                  text: qsTr("28/06/2014")
                                                  value: "28/06/2014"
                                              }
                                              Option {
                                                  text: qsTr("29/06/2014")
                                                  value: "29/06/2014"
                                              }
                                              Option {
                                                  text: qsTr("30/06/2014")
                                                  value: "30/06/2014"
                                              }
                                              Option {
                                                  text: qsTr("01/07/2014")
                                                  value: "July 1 2014"
                                              }
                                              Option {
                                                  text: qsTr("02/07/2014")
                                                  value: "July 2 2014"
                                              }
                                              Option {
                                                  text: qsTr("03/07/2014")
                                                  value: "July 3 2014"
                                              }
                                              Option {
                                                  text: qsTr("04/07/2014")
                                                  value: "July 4 2014"
                                              }
                                              Option {
                                                  text: qsTr("05/07/2014")
                                                  value: "July 5 2014"
                                              }
                                              Option {
                                                  text: qsTr("06/07/2014")
                                                  value: "July 6 2014"
                                              }
                                              onSelectedIndexChanged: {
                                                  if (selectedOption == all) {
                                                      dropDownDataSource1.sQuery = ""
                                                  } else
                                                      dropDownDataSource1.sQuery = dropDown1.at(dropDown1.selectedIndex).value;
                                              }
                                          }
                                      }
                                  ]
  
                                  listItemComponents: [
                                      ListItemComponent {
                                          type: "item"
                                          StandardListItem {
                                              title: ListItemData.fixtureInfo
                                              description: Qt.formatTime(new Date(ListItemData.timestamp * 1))
                                          }
                                      }
                                  ]
  
                                  onTriggered: {
                                      var selectedItem = dataModel1.data(indexPath);
                                      var detail = fixtures.createObject();
  
                                      detail.fixtureInfo = selectedItem.fixtureInfo
                                      detail.dateInfo = selectedItem.dateInfo
                                      detail.timeInfo = selectedItem.timeInfo
                                      detail.timeZone = Qt.formatTime(new Date(selectedItem.timestamp * 1))
                                      detail.courtInfo = selectedItem.courtInfo
                                      detail.resultInfo = selectedItem.resultInfo
  
                                      navigationPane1.push(detail)
                                  }
                              }
  

  GroupDataModel {
                      id: dataModel1
                      sortingKeys: [ "dateNumber", "id" ]
                      grouping: ItemGrouping.ByFullValue
                      sortedAscending: false
                  },
                  DataSource {
                      id: dataSource1
                      property string sQuery: ""
                      onSQueryChanged: {
                          dataModel1.clear()
                          load()
                      }
                      source: "http://tundracorestudios.co.uk/wp-content/uploads/2014/06/Fixtures.json"
                      type: DataSourceType.Json
  
                      onDataLoaded: {
                          //create a temporary array tohold the data
                          var tempdata = new Array();
                          for (var i = 0; i < data.length; i ++) {
  
                              tempdata[i] = data[i]
  
                              //this is where we handle the search query
                              if (sQuery == "") {
                                  //if no query is made, we load all the data
                                  dataModel1.insert(tempdata[i])
                              } else {
                                  //if the query matches any part of the country TITLE, we insert that into the list
                                  //we use a regExp to compare the search query to the COUNTRY TITLE (case insenstive)
                                  if (data[i].fixtureInfo.search(new RegExp(sQuery, "i")) != -1) {
                                      dataModel1.insert(tempdata[i])
  
                                      //Otherwise, we do nothingand donot insert the item
                                  }
  
                              }
  
                          }
  
                          // this if statement below does the same as above,but handles the output if there is only one search result
                          if (tempdata[0] == undefined) {
                              tempdata = data
  
                              if (sQuery == "") {
                                  dataModel1.insert(tempdata)
                              } else {
                                  if (data.fixtureInfo.search(new RegExp(sQuery, "i")) != -1) {
                                      dataModel1.insert(tempdata)
                                  }
                              }
                          }
                      }
                      onError: {
                          console.log(errorMessage)
                      }
                  },
  

  onCreationCompleted: {
                  dataSource1.load()
              }
  

  In another part of my application, I use an activity indicator to load a webView but I couldn't reshape it for the list view.

  The following code works when my webView loads:

  WebView {
                      id: detailsView
                      settings.zoomToFitEnabled: true
                      settings.activeTextEnabled: true
                      settings.background: Color.Transparent
                      onLoadingChanged: {
                          if (loadRequest.status == WebLoadStatus.Started) {
  
                          } else if (loadRequest.status == WebLoadStatus.Succeeded) {
                              webLoading.stop()
                          } else if (loadRequest.status == WebLoadStatus.Failed) {
  
                          }
                      }
                      settings.defaultFontSize: 16
                  }
  

  Container {
              id: loadMask
              background: Color.Black
              layout: DockLayout {
  
              }
              verticalAlignment: VerticalAlignment.Fill
              horizontalAlignment: HorizontalAlignment.Fill
              Container {
                  leftPadding: 10.0
                  rightPadding: 10.0
                  topPadding: 10.0
                  bottomPadding: 10.0
                  horizontalAlignment: HorizontalAlignment.Center
                  verticalAlignment: VerticalAlignment.Center
                  ActivityIndicator {
                      id: webLoading
                      preferredHeight: 200.0
                      preferredWidth: 200.0
                      horizontalAlignment: HorizontalAlignment.Center
                      onStarted: {
                          loadMask.setVisible(true)
                      }
                      onStopping: {
                          loadMask.setVisible(false)
                      }
                  }
                  Label {
                      text: "Loading Content..."
                      horizontalAlignment: HorizontalAlignment.Center
                      textStyle.fontSize: FontSize.Large
                      textStyle.fontWeight: FontWeight.W100
                      textStyle.color: Color.White
                  }
              }
          }
  

  onCreationCompleted: {
          webLoading.start()
      }
  

  Therefore, what I am trying to make is: get the activity indicator to show when the list view is charging and when it's over, for the activity indicator be invisible. Also, if the user doesn't have an internet connection or loses the signal while the data is filling: would it be possible to recover data from a file stored locally instead ("asset:///JSON/Fixtures.json")?

  Thanks in advance

  With the help of a few other developers I maneged to make everything work properly.

  Jeremy Duke pointed out that I would need to use the onItemAdded in my data model of the Group:

  onItemAdded: {
                          myActivityIndicator.stop();
                          myActivityIndicator.visible = false;
                          loadMask.visible = false;
                          searchingLabel.visible = false;
                      }
  

  Adding that, the loading stops when an element has completed the list.

  Thanks for your help

• How can I change the data used by a graph of a waveform depending on which tab is active?

  Hello

  First of all, I want to say thank you in advance!  Let me describe the situation a bit.  My front panel VI (see attachment) has a tab control and on each tab of the window, I have a graph of intensity with a free drag cursor.  On the tab control window that I try to display the row or column of data where the cursor is, I can do this for each in the intensity chart individually.  I'm trying to clean up the block diagram a bit and instead of using 4 waveform graphs, I want to use one, can the data that is displayed in the graph of the waveform are associated with which page is active in the tab control.  Is this possible?  And how can I do?

  Thank you once again,

  ~ Daniel DeWitte

  Thread just the terminal tab to a case structure, switching data going graphic terminal

  (Sorry, message by phone, can not look at your code...)

• As of the field Date is not displayed

  Hello

  I have a date custom field where I have to select a date. I used it for the touchscreen. Now I want to implemnt it in no touch. But to not touch, I am able to select the date, but it does not appear in the field. I used a flag that I've initialized as false. I write a method like below:

  public String getDateFromPicker() {
          String format = "MM/dd/yyyy";
          SimpleDateFormat dt = new SimpleDateFormat(format);
          String date = dt.format(new Date(getDate()));
          if (flag ){
              return date;
          }
          else{
  
              return "";
          }
      }
  

  For the touch screen, I used the code to enter the date below value:

      protected boolean touchEvent(TouchEvent message) {
          flag=true;
          return super.touchEvent(message);
      }
  

  In Touch no I used the code instead of the above code below:

    public boolean keyDown(int keycode, int time)
      {
          if (Keypad.KEY_ENTER == Keypad.key(keycode))
          {
              flag = true;
              return true;
          }
          return super.keyDown(keycode, time);
      }
  

  But it still doesn't work. I use 8900 Simulator for Non touch and 9530 for touch. And I'm on BB OS 5.0.0.

  Please help me...

  Hi simon,.

  After a long period of time. I solve this problem. In fact, I used this indicator due to the means of display mode when its value is false, then the date is not displayed.

  I solved it by using the NavigationClick() method.

  Thanks for your time.