My blanks in front so I use the Panel bounds property

Similar Questions

• Re: Weird sound coming from USB using the Panel mixing Audio on Satellite C870-1EX

  Hello!

  So, my sister has Satellite C870-1EX and she uses new Audio Mixer with integrated sound card sends its via USB cable to the computer (computer recognises as external audio device and map). It's the device: http://alesis.com/multimix8usbfx.

  A few weeks ago, she began to notice a very odd sound, sort of high-pitched, whistling, like a very fast electronic beep. Something similar to what good old modems of the internet when they were connected to the phone line, just not a little faster and strong.

  First of all, of course, we tested every single setting on the Audio Mixer Panel.
  Then, we got new USB cable and it traded.

  After that we also took down all the material, checked all cables, if necessary, detangle swapped the power supply, check a different recording software, even tried a few other recording devices USB etc etc.

  None of this has helped. The drivers are all there too.

  Here's the catch. I used the same equipment with the same settings on my computer and no hissing noise at all. The thing is, any parameter, we tried, only the hiss remains the same, nothing changes.

  Even if you apply a few sound effects which should either accentuate or reduce any type of noise in the signal that is sent to the USB port on the computer, this whistling noise remains the same.

  What worries me is that something is wrong with the material of my sister's laptop.

  The noise does not appear if we use, for example, microphone that uses 3, 5mm taken or the built-in microphone of the laptop during the recording of the commands in the same session with the same software and similar settings (given some must be different because of the different entry).

  However, the noise is if we use an external USB recording equipment on any of its ports.

  Windows on his laptop were resettled some time ago (now it is on Windows 7), but the problem appeared a few weeks later.
  As I said earlier, the drivers are all there and to date as well.

  So, I hope that one of you will return with a software sollution (single)... and I hope we will not need to take his computer back to the shop.

  However, as it seems now, the last is more likely to occur.
  Please, tell me I'm wrong :)

  Thank you!

  Hello

  One of my friends had a similar problem with a DJ controller: Traktor Kontrol S4
  There was not a sound, but he noticed a few dropouts stuttering and audio.

  The problem was the background processes that were open when you use the controller.
  To resolve this problem, it was necessary to disable all possible devices in the device as WLan, LAN, Bluetooth Manager, etc.
  In addition, he had to Disable Antivirus software and firewall that was running in the background.

  I put t know if it helps you, but I think that its worth a try

  Another idea: try to reduce the performance of the processor. This is possible in the Windows 7 power management.
  How to manage Windows 7 power management features
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Option CPU power management contains the option called the Maximum processor state
  Here you can set it to 90% - 80%

• Load modules using the moduleLoader url property?

  My requirement is to load a module by using the following URL

  "' somthing.swf? a = b and b = c"

  It can load the module and put some values after it is loaded. But when I create an instance of the moduleLoader and set the Url property does nothing. My code is as follows

                          url += constructUrl()+"?"; // something like 'modules/vst/visitModule.swf' will be returned
                 
                 if(_modLoader){
                      _modLoader.addEventListener(ModuleEvent.READY,readyMod);
                      _modLoader.addEventListener(ModuleEvent.ERROR,loadError);
                      _modLoader.addEventListener(ModuleEvent.PROGRESS,loadProgress);
                      _modLoader.addEventListener(ModuleEvent.UNLOAD,unload);
                      _modLoader.applicationDomain = ApplicationDomain.currentDomain;                    
                      _modLoader.url = url;
                           }
  

  Do you think something wrong here? I'm using Flex 3.2.

  I read in the forum below to the http://forum.springsource.org/archive/index.php/t-65228.html solution but could not operate. Yet to try.

  Thank you

  Well yew statement protecting the loadModule() call looks like this:

  If (_url! = null & loadRequested)
  loadModule();

  Assuing url is not null, loadRequested must be false. This seems to indicate that you do not have ModuleLoader declared in a mxml file. The ModuleLoader created using actionscript? If so, you must call loadModule().

  -Darrell

• Cannot delete games using the Panel configuration or Big Fish Games Manager

  After a game that I'm not going to buy, I'm trying to remove it with Big Fish Games Manager, but he has not worked, then I go to control panel, programs, highlight the game, uninstall.  The two methods are not working, they could remove a game once out of five times.  I get a message, wait for the last item is removed.  Usually I turn my Dell/Vista 32 Bit MS Office Small Business 2007, so I can start over the removal of these games.  Big Fish response is to go to the control panel.

  Nordine salvation,
   
  1 have you made changes to your computer recently?
  2. you receive an error message when you try to uninstall the game?
  3. If Yes, what is the exact error message you get?
  4. what game you try to uninstall?
  5 are you facing this problem only with specific programs?
  
  I suggest you to follow the steps and check if it helps.
  Method 1: Perform a clean boot and check if it helps.
  How to configure Windows XP to start in a "clean boot" State
   
  Note: Make sure you perform the steps in how to configure Windows to use a Normal startup state
  to start your computer normally.
  
  Method 2:  Follow the steps and check if that helps.
  Problems installing and uninstalling programs on Windows computers
   

• I can not even open FF because the profile is not found, even after using the profile in order to create a new profile.

  I've recently upgraded to version 40 39.0.3. The first upgrade was not so I removed FF using the control panel (uninstall program). I reinstalled again, but I got the messages that FF was already running, etc. as other users have noticed. I open profiles (Open firefox.exe - p) and tried to open FF with the "default" profile that did not work. I created a new profile ("defaultuser") and FF open. (I have the box checked to use the new profile on startup). I have created FF as I wanted it, and then exit. When I started later FF, the profile is not found. The profile did not have the "defaultuser" profile, does not open with the "default" profile, but would a new profile must be created and FF to open and run. Quit FF and reopen produces the same sequence (profile not found, etc.) I uninstalled 40 and reinstalled version 39.0.3 and I have the same problems with this version (39.0.3), plus he's starting the upgrade to version 40, and soon as I complete the installation again. I uninstalled the 39.0.3/40 version and reinstalled 40 using the Profiles page to write this question.

  I removed the version FF 40 using the Panel of control/uninstall. I deleted all the files that have been "* firefox *" and "* mozilla * ' (and there are some). I rebooted, and then reinstalled FF version 39.0.3. I could we FF immediately (without having to create a new profile). I have not had any problems with a bad certificate of Google, Yahoo, etc.. I went to all the web sites open very well. I could restart, then restart FF several times without problems or issues of certificate. Meanwhile, I made no changes to Kaspersky, and as far as I know, Kaspersky works as he usually does. I am almost sure that FF 40 version has a certificate problem that I can't fix. I'm less sure if the original upgrade to version FF 39.0.3 to 40.0.0 (then 40.0.2) played a role in my profile questions. Regardless, I have a version of FF that works and auto-updated to FF is off (and it will remain like that until I gather a few of this blog and other insurance which emits 40 FF are ironed out). I appreciate the help that you (and jscher200 in another thread) has attempted to provide. While the issues are not fixed, the thread can be closed.

• Satellite A500-19 x - cannot turn off the sound by using the command buttons

  I can't cut using the panel on the laptop itself...
  It lights up when I push, beeps as well, but don't put the volume muted.

  From Toshiba tech suggested I reinstall value pack or something, in which I did, but always without success.
  The rest of the touch buttons work as eco etc...

  Running on Windows 7 standard and its only 24 hours old! :(

  Hello!

  Don really find t Toshiba Value added Package?
  Come on man, you have to look at the Toshiba site, where you can find all the drivers and tools for your laptop:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Before installing the latest version, first remove the old and reboot the laptop. Then, install the latest version form the Toshiba page.

  Good bye

• Include the attribute custom report using the disc

  I'm to customize a script provided by Alan Renouf in his PowerGUI Powerpack.  The script I'm customization in the Powerpack is named 'VM disk sizes.

  His screenplay does everything we need from a point of view of output except that we can also include a custom attribute (Custom Field) VM as well as the information of the disk space.  I have included the below custom script, please note that this is a script/PowerGUI PowerPack we customize but was initially written and provided by Alan Renouf and all credit for this original work must be given to Alan.

  I have included our custom below script and have "in bold Red" line in the script that does not work:

  $AllVMs = get-View - ViewType VirtualMachine. Where {-not $_.} Config.Template}
  $SortedVMs = $AllVMs | Select *, @{N = "NumDisks"; E={@($_. Guest.Disk.Length)}} | Sort-Object-down NumDisks
  {ForEach ($VM to $SortedVMs)
  $Details = new-object PSObject
  $Details | Add-Member-Name name-value $VM.name - Membertype NoteProperty
  $Details | Add-Member - MemberType NoteProperty-name CustomFields-value (($VM.)) CustomFields | %{"$($_. Key) = $($_.) (Value)'}) - join ',')
  $DiskNum = 0
  Foreach ($disk in $VM. Guest.Disk) {}
  $Details | Add-Member-name "drive$ ($DiskNum) path"-MemberType NoteProperty-value $Disk.DiskPath
  $Details | Add-Member-Name "Disk$ ($DiskNum) Capacity (MB)"-MemberType NoteProperty-value ([math]: round ($disk.) Capacity / 1 MB))
  $Details | Add-Member-Name "Disk$ ($DiskNum) FreeSpace (MB)"-MemberType NoteProperty-value ([math]: round ($disk.) FreeSpace / 1 MB))
  $DiskNum ++
  } # end foreach nested
  $Details.PSTypeNames.Clear)
  $Details.PSTypeNames.Add ('Virtu-al'.PowerPack.VMGuestDisks) '
  $Details.PSTypeNames.Add ('Virtu-al'.PowerPack.VM) '
  $Details
  } # end foreach

  When you use the Get view as seen on the first line of the script, it appears the CustomField information not available in the generated view.  How to develop the view to include CustomFields/CustomAttributes for each virtual computer in our environment and then report on their subject?

  Please let me know if I did a poor job explaining the scenario and what I'm after here.  Any help is greatly appreciated!

  Hello, jSun311-

  Yes, you are right - there is no such thing as the "CustomFields" property on a managed object VirtualMachine .  You can always get the names and the corresponding values of the custom fields, you just have a little.  For example, you could change the line to:

  ...## make a comma-separated string that holds the custom field key/value pairs, like "cust0 = myValue0,cust1 = myDateInfo"$Details | Add-Member -MemberType NoteProperty -Name CustomFields -Value (($VM.Value | %{$oCustFieldStrValue = $_; "{0} = {1}" -f ($VM.AvailableField | ?{$_.Key -eq $oCustFieldStrValue.Key}).Name, $oCustFieldStrValue.Value}) -join ",")...
  

  and you should be happy as a clam.

  BTW, this call Get-view on your first line could be optimized a little using the - Filter parameter, like:

  $AllVMs = Get-View -ViewType VirtualMachine -Filter @{"Config.Template" = "false"}
  

  Pretty minimal in this case, but can be very useful in other scenarios of Get-View.  And, you may want to retrieve only the properties of the managed VirtualMachine object that you plan to use, so that the memory usage is reduced to the minimum, speed is optimized, etc. (do you this by using the - Get-mode property param).

  Anyway, how does do for you?

• How can I use the filter property of the blur

  I commented the alpha line in my script but I would use the blur filter property.

  My animation seams a little brusque acceleration effect can be doe or not... If yes how?

  Please take a look at the attached pictures for more details... thank you.

  TX

  var dir:int = 1;

  var T:Timer = new Timer (1);

  T.addEventListener (TimerEvent.TIMER, Rabat);

  Rabat (event: TimerEvent) function: void

  {

  dragonfly_mc.wings_mc. ScaleX +=.05 dir.;

  If ((dragonfly_mc.wings_mc.scaleX > = 1 & & dir > 0) |)

  (dragonfly_mc.wings_mc.scaleX < =.3 & & dir < 0))

  {

  dir * = - 1;

  dragonfly_mc.wings_mc.Alpha =. 3;

  import flash.filters.BlurFilter.quality;

  Event.updateAfterEvent ();

  }

  }

  T.Start ();

  filter interpolation (that I provided) interpolated the filter of a blur from 0 to a blur of 30.

  certain classes must be imported.  the flash compiler will let you know what needs to be imported.  If it does not recognize a class, you must import it.

• Quiz jump when you use the outline Panel

  I have an author wishing to use the map view. The author has figured out that if the learner uses the part of the plan, they bypass the multiple questionnaires within the presentation.
  
  Using the parameters of the required quiz did not.
  
  Any ideas?

  In fact, the author wanted the part of the plan to display. But the author feared that the learner would use the Panel contour to navigate and do not enter the quiz (as the questionnaires were not in the outline Panel.)

  No worries now... I got another contact advice me to:

  1. go in Breeze, Quiz Manager, then press [edit Quiz settings].
  2. check Show Quiz slides in the outline

  In this way, the questionnaire slides will appear in the outline Panel.

  Thanks for your advice!

  Ingrid

• Why the Panel in Dreamweaver is gray?

  I have active synced to the Cloud, but when I try to use the Panel in Dreamweaver, it is grayed out.

  In addition, the button synchronize settings is grey.

  Thanks for your help.

  

  Hi David,

  With the last version CC DW 2014.1.1, extract of Panel will be grayed out until a document is open in DW. Open any document and extract will be available for you.

  Thank you

  Lalita

• I just installed lihtroom CC and develop, the picture is blue. When I used the front then the image before is normal and blue again after.

  I just installed lihtroom CC and to develop the module, the picture is blue. When I used the front after, the before image is normal and the after looks always blue.

  I don't know what to do?

  See link below:

  https://forums.Adobe.com/thread/1823307

  6 Lightroom displays a blank blue screen with an X through it in the module development for all my photos

• Hello - ideas as to the "cloud" icon why opens as a blank white screen - I can see the craft, but is not useful, cannot open apps - see if there are dates, add to my plan (to acquire more apps)-

  Hello - ideas as to the "cloud" icon why opens as a blank white screen - I can see the craft, but is not useful, cannot open apps - see if there are dates, add to my plan (to acquire more apps)-

  White screen

  https://forums.Adobe.com/thread/1249756

• I have illustrator cs5, and I have plans, side, rear, fronts of vehicles. I did a trace of the line of these elevations and projected using the perspective for the perspective grid tool, but I get a distorted view on it, I'm trying

  I have illustrator cs5. I have front, side, rear, plans of vehicles. I need to create 3D illustrations. I did a trace of the line of these elevations and them projected on the perspective grid using the perspective tool.  I got a distorted view of each side of the rack.  What should I do?

  Please see the establishment.

• While using the blank publication for a button trigger appears for my submenus before my menu is open

  I used the blank publication to create my navigation menus. When I click on the tab in the main menu, it displays a menu drop-down. When I saw the site, triggers in my menu drop-down that can be clicked or displayed without having to open the main menu tab. Does anyone have a solution to this problem?

  The menu item must be on the same layer.

  But I think you might need to rethink the way in which you built the menu.

  The illustration below shows the menu item with a blank publication as a base, which controls the link up widget and a new feature widget placed inside

  the composition target to control the secondary menu items.

  (making sure to activate - target hide: we roll-out trigger and target for the two widgets)

  The second image below shows what it would look like in a browser.

  

  

• Blank PDFs open while the user uses the Web browser

  One of the users of our company presents a strange problem with Adobe Reader and Internet usage. Randomly when it is on the internet reader will open 1 empty PDF. After leaving this black PDF that opens without apparent reason, a second blank PDF opens. Only after the closing of the windows of the second PDF, reader cease to open a blank PDF.

  To be clear, the question, I was in his office when open PDF files on him, and he has not yet clicked a PDF file to view. It just seems to happen after he clicks on a link on the web.

  He uses Windows 7 professional 64-bit, and I'm sure he's got Reader X or later version on his machine.

  I think he uses Google Chrome browser when that happens, but he said recently this problem with Internet Explorer, "accidentally, I open internet explore and click on an article of new KETV.»  This time the problem of pdf did not stop.  He opened several tabs for the article I've tried to see. And he tried to open a pdf file, sometimes more than one pdf for each open tab.  "I got caught in a cycle until I used the Task Manager to kill it."

  If you have an idea why this is happening please let me know.

  Thank you

  I found the solution to my problem, fortunately. If ever, someone else come across this problem and found this post. Users were using Reader 9. So I have updated their XI player and did not have the problem again. If this never happens on the road once again, I would say to upgrade to the latest version and you shouldn't have the problem more.