Caught the Virus, restored to the rear and all very well. Should I upgrade my security?

Similar Questions

• Poor quality of the sound in the timeline and export; very well in the Source?

  Hi all.

  Newbie-Pr but experienced pro audio digital. I am confused and I know I am missing just something somewhere.

  I made a video for one of my songs. The graphics are quite (in AE), imported Pr and everything what is superb. I import the final audio mix and it sounds very poor quality when played the chronology and the final output, regardless of the format (I tried several presets and custom as well settings). I played a bit and noticed that the audio sounds fine when played in the Source window inside the Prime Minister.

  The session of Pr is comrised of 18 video tracks (not all playing at the same time, of course) and a stereo audio track.

  I tried to re - export audio from logic to depths of different bits, sampling frequencies and formats of file (mp3, wav, AAC, etc.) but the results are the same each time: Source (Pr) sounds very good, logic output sounds very well made / reading of the timeline looks very bad quality mp3 and produces final sounds just as bad.

  I tried everything I can think of. I hope one of you can show me what I'm missing.

  TIA!

  Mark

  First Pro CC

  Processor 2 x 2.8 GHz Quad-Core Intel Xeon

  Memory 8 GB 800 MHz DDR2 FB-DIMM

  Graphics  ATI Radeon HD 2600 XT 256 MB

  Software  OS X 10.9.1 (B 13, 42)

  Thanks for the reply!

  I lived the same results, no matter what I used the export settings. In addition, the poor quality of the sound was present in the timeline itself, without even exporting the project.

  Finally, I lifted my hands, has launched a completely new project, the same audio file in drugs... sounded good. Copied / pasted the video clips in the project original, broken and boom, everything is fixed. Yes, corrupted file Pr, it turns out. All I had to do was start a new project and import all the old components.

  I had to do that in logic a lot (more and more these days). I wish just that I had tried 10 hours earlier! HA.

  Anyway, problem solved and many thanks!

• I lost the office and all programs-system restore will not work. Now, all I have is a blue screen.

  Original title: I lost the office and all programs-system restore won't work

  I don't know what happened, now all I have is a blue screen, if I click on programs it says 'empty' can not get on anything

  Hello
   
  1. what exactly happens when you try to perform the system restore? If you receive an error message then, send the same return.
  2 have you made changes on the computer before this problem?
   
  Please answer these questions and to provide more specific information on the issue. This could help us help you better.
  The following articles could be useful.
  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
  http://support.Microsoft.com/kb/318027
  When you point to "Programs" on a Windows XP-based computer, the program list does not appear, or the list of programs is empty
  http://support.Microsoft.com/kb/941248

• Vertical horizontal ratio has been changed accidentally. Now a vertical oblong (eg. a playing card) looks like the place and all the letters and pictures seem to be shortened.

  I suspect that I accidentally pressed a button or two on my Toshiba Satellite M55 and now all the images and the text have changed their vertical horizontal ratio. As a result, a vertical oblong (like a playing card), now looks like the place and all the letters and the images seems to be shortened or at least more wide than they should be. Is it possible to restore the original report? I tried access to control panel, hot key lists etc but can't find anything that actually return my screen to a normal appearance. Can anyone help please?

  Check Toshibha manul to press the function key to undo the changes.

  Good luck!!

• My taskbar? (at the bottom of the screen) and all materials-clock, battery, etc. from start menu, a completely frozen. Pleeez HEEELP!

  Hey there, at 7.52 pm (3 hours), my taskbar? (at the bottom of the screen) and all materials-clock, battery, etc. from start menu, completely frozen.

  The cursor does absolutely nothing when you click on it. Heeeeelp Pleeeez!
  Thank you, Nat

  Given that this problem is only a few hours ago, please do a system restore.

  Choose a date where you did NOT have this problem as your restore point.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  You can give alco, this method a try...
  Restore explorer.exe

  Press CTRL + Alt + Delete... Task Manager... Processes tab... Right-click on explorer.exe... click on end process... Applications tab... New task... in the Open box, type explorer.exe ... OK when finished.

• I need to reinstall my Linux Mint, therfore also Thunderbird. How can I save the addresses and all my messages (copy and again after installation Thunderbird)

  I need to reinstall my Linux Mint 17 companion, therfore also Thunderbird. How can I save the addresses and all my messages (copy and again after Thunderbird installation)?

  You will need to backup your Thunderbird profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring #Manually_back_up_the_profile

• Several sites, including gmail and all of myspace, recommend that upgrade to the latest version of my browser in order to enjoy a betetr experience.

  Several sites, including gmail and all of myspace, recommend that upgrade to the latest version of my browser in order to enjoy a betetr experience. Seems that these sites will not recognize that I am under firefox 10.0.2, these sites work fine in chrome, but not firefox.

  Message on the gmail website:
  A few important features may not work in this version of your browser, if you have been directed to the basic HTML version.

  Message on myspace:
  Upgrade your browser for a better experience of Myspace.

  Can you try to reset your useragent parameter? Instruction can be found here, see the statement of Helper7677 3rd

  • https://support.Mozilla.org/questions/760152

• Why can't connect using the address bar, while bookmarks and search very well working conditions?

  Addresses by typing in the address bar does not at all; bottom of screen says 'Done '. But clicking on bookmarks or a search works very well.

  Upgrade your browser Firefox 3.6.24 or 8 and check

  • getfirefox.com

• Implementation of two R7000 mode bridge (1 connects them 2 the internet and all devices, use 2!)

  Hello

  I have trouble finding my drives NAS via Wifi.

  Since I moved my NAS drives to the location of my second router and connect the first router to the internet and all my mobile devices and laptops, I have problems connecting to my NAS readers. Sometimes it works, but more often, it's not.

  I've implemented the first router as "router mode" and the second router als 'bridge'

  Can I change the configuration, so that my second router is connected to the NAS drives and also works as my router for mobile devices and laptops? Then the first router just to connect to the internet and transfer it via the bridge on the second router.

  I tried this, but it doesn't seem to work...

  Concerning

  Michael

  Just to close this topic: got the solution works by using a set of powerline Netgear. It provides internet access to my router located posting the TV and works perfectly. Wireless AC is not the answer to everything, I realize ;-)

  Thanks for the discussion.

• My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help?

  My grandson was playing with the keyboard and all my icons and web pages are now huge. I had this happen before, but I can't remember how to reset it. Any help? I went through properties and all that it is fine. It has something to do with the keyboard and an F key and control or ALT.

  Hi Sashaxwp,

  To get small icons in your Start menu

  Click Start on the taskbar, and then select Properties from the context menu.
  Ensure that the selected option of Start Menu as ist and click Customize to the right of the Start Menu option.
  This will display the Customize Start Menu dialog box.
  Use the Option Select an icon of Sice to Programms and now select small icons

  To configure your display appearance, wants to get small icons on your desktop

  Right click on an open area of the desktop and select Properties.
  Click the appearance tab.
  Click on 'effects' (in my Version of XP in German), perhaps you will need to click on Advanced.

  In my XP there is a "huge symbols" choice, if you have this choice, remove the hook.

  Good luck and have a nice day!

  Kind regards

  Rainer

• Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS because of system problems

  I had to reinstall vista OS because of problems in system, borrowed friends Vista Premium cd bc my laptop didn't come with a cd of Vista, now my system properties shows that I need to activate my windows, but when I looked at my product key at the bottom of my laptop letters isn't quite clear & seems to have rubbed off the cause so no chance to enter the product key & get the message error product key is not valid - at the time of purchase, no cd not supplied with my Toshiba Satellite and do not know, I registered my product key in the beginning, but no problems until now. you don't know why it is past and don't know how to correct it or unclear letter?

  * original title - product key entered is already in use - Toshiba Satellite laptop computer - a letter from the product key rubs against the broad and all re-installed Vista OS due to system problems *.

  Hi jsserrano68,

  Read the following article about the product keys for Windows:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/outFrm.jsp?ofId=AskIris&SearchString=product+key+Vista

  In addition, if you need to contact Toshiba support:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact&PF=true

  Thank you

  Deb

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can go to the internet and all, but on the icon say "NOT CONNECTED" and I tried to connect to the network for 2 weeks already... its still not not workin... Please help!

  I tried to connect to the network several times but its still saying 'not connected' but I can go to the internet and all...
  and I also try to fix or diagnose, but its still not not workin...
  Please help idk what 2 do more...

  Hello

  Good luck, you need technical support for a real computer store or system manufacturer is supported.

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. You can download these on another
  computer if you need to and transfer on removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• C769US, recovery boot, loads and works very well, but the next new start begins recovery... again and again

  Well, the good enough subject line says it all.  Run you the recovery and everything works well. Can save a document or download the updates.  But when you stop and start (or restart after windows updates) nothing has been saved... it goes right back into recovery mode.

  When I look in disk management in Windows Vists it tells me the drive the healthy and functioning properly.  However, when I run diagnostics in the BIOS it tells me that there is a hard disk with error code 10008 failure.  So what should I assume that the drive is dead? Said recovery reformats it, but like I said, do remember not or record programs or DATA.

  I have recovery DVD and I downloaded the service manual and feel that I can replace the drive myself.  But I'm not sure I buy the right disc to install.  I read on this site that others have bought Western Digital, so if you think all that I need a new disc could someone tell me if this drive will work?

  Western Digital - Scorpio Blue 250 GB internal SATA hard drive for laptops

  WD hard drive you linked to should work fine in your laptop, just myself to order in the size of 320 GB.

• I have a hotmail account and all works well on my pc, but I have several emails that I can't delete on my i phone. When I try to delete them, it says "unable to move the message" ideas?

  I have a hotmail account and all works well on my pc, but I have several emails that I can't delete on my i phone. When I try to delete them, it says "unable to move the message" ideas?

  Hi Pat,

  You are able to delete emails from Hotmail in computer science?

  You can read the following article and check if it helps.

  iPhone and iPod touch - cannot delete e-mail messages

  http://support.Apple.com/kb/ts2475

  If the problem persists I suggest you to post this request in iPhone and Hotmail forum for better support.

  You can follow the link to view the query in these forums.

  https://discussions.Apple.com/community/iPhone/using_iphone

  http://answers.Microsoft.com/en-us/windowslive/Forum/mail?tab=QnA

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

  I want to activate Acrobat Pro 9 serial key and get message that are 2 active activations. We're old computer with problematic material and other is the same pc that I didn't turn off the license and reformatted. What should do?

  I didn't know, I had to disable before turning back, but now I don't have this option. Is there a way to disable these two licenses and activate again the good?

  Hi vasilisp36877173 ,

  Please see these items:- Learn how to enable or disable Adobe applications

  Solve the problems of activation and deactivation of Adobe and error messages

  Let me know how it goes.

  Kind regards

  Christian