Cause many ATA exceptions in syslog, looking for SD6SF1M128G1022I
I bought one of these drives promising to have as a boot drive for my NAS omv.
Unfortunately I get quite a few exceptions ATA in the system log:
Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363285] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363328] ata1.01: BMDMA stat 0x64 Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363350] ata1.01: failed command: READ DMA EXT Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363379] ata1.01: cmd 25/00:00:a0:3e:44/00:02:0a:00:00/f0 tag 0 dma 262144 in Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363379] res 51/84:7f:21:3f:44/84:01:0a:00:00/f0 Emask 0x10 (ATA bus error) Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363456] ata1.01: status: { DRDY ERR } Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363478] ata1.01: error: { ICRC ABRT } Aug 10 16:26:52 msa-nas1 kernel: [ 1455.363519] ata1: soft resetting link Aug 10 16:26:53 msa-nas1 kernel: [ 1455.547847] ata1.00: configured for UDMA/33 Aug 10 16:26:53 msa-nas1 kernel: [ 1455.556895] ata1.01: configured for UDMA/33 Aug 10 16:26:53 msa-nas1 kernel: [ 1455.556915] ata1: EH complete Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595322] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595375] ata1.01: BMDMA stat 0x64 Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595401] ata1.01: failed command: READ DMA EXT Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595438] ata1.01: cmd 25/00:00:a8:4e:44/00:02:0a:00:00/f0 tag 0 dma 262144 in Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595438] res 51/84:8f:19:4f:44/84:01:0a:00:00/f0 Emask 0x10 (ATA bus error) Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595529] ata1.01: status: { DRDY ERR } Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595556] ata1.01: error: { ICRC ABRT } Aug 10 16:26:53 msa-nas1 kernel: [ 1455.595603] ata1: soft resetting link Aug 10 16:26:53 msa-nas1 kernel: [ 1455.783876] ata1.00: configured for UDMA/33 Aug 10 16:26:53 msa-nas1 kernel: [ 1455.792925] ata1.01: configured for UDMA/33 Aug 10 16:26:53 msa-nas1 kernel: [ 1455.792945] ata1: EH complete
A check with chip gave me this
root@msa-nas1:~# sudo smartctl -a /dev/sdf smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.16.0-0.bpo.4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Marvell based SanDisk SSDs Device Model: SanDisk SD6SF1M128G1022I Serial Number: 144211400493 LU WWN Device Id: 5 001b44 c9f40532d Firmware Version: X231200 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Mon Aug 10 17:10:00 2015 HKT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x11) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0 9 Power_On_Hours 0x0032 253 100 --- Old_age Always - 740 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 32 166 Min_W/E_Cycle 0x0032 100 100 --- Old_age Always - 0 167 Min_Bad_Block/Die 0x0032 100 100 --- Old_age Always - 29 168 Maximum_Erase_Cycle 0x0032 100 100 --- Old_age Always - 7 169 Total_Bad_Block 0x0032 100 100 --- Old_age Always - 209 171 Program_Fail_Count 0x0032 100 100 --- Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 --- Old_age Always - 0 173 Avg_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 0 174 Unexpect_Power_Loss_Ct 0x0032 100 100 --- Old_age Always - 10 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 194 Temperature_Celsius 0x0022 061 050 --- Old_age Always - 39 (Min/Max 25/50) 212 SATA_PHY_Error 0x0032 100 100 --- Old_age Always - 426 230 Perc_Write/Erase_Count 0x0032 100 100 --- Old_age Always - 0 232 Perc_Avail_Resrvd_Space 0x0033 100 100 004 Pre-fail Always - 100 233 Total_NAND_Writes_GiB 0x0032 100 100 --- Old_age Always - 58 241 Total_Writes_GiB 0x0030 253 253 --- Old_age Offline - 25 242 Total_Reads_GiB 0x0030 253 253 --- Old_age Offline - 9 243 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 715 - # 2 Extended offline Completed without error 00% 691 - # 3 Extended offline Completed without error 00% 667 - # 4 Extended offline Completed without error 00% 644 - # 5 Extended offline Completed without error 00% 621 - # 6 Extended offline Interrupted (host reset) 00% 618 - # 7 Conveyance offline Completed without error 00% 0 - # 8 Conveyance offline Completed without error 00% 0 - # 9 Conveyance offline Completed without error 00% 0 - #10 Extended offline Completed without error 00% 409 - #11 Short offline Aborted by host 00% 409 - Device does not support Selective Self Tests/Logging
Any idea what goes wrong, why the SSD is causing all these exceptions in the system log?
The SMART info actually say quite a bit about a few errors have occurred, smartctl-x:
Device does not support Selective Self Tests/Logging Warning: device does not support SCT Commands SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 54 Command failed due to ICRC error 0x0002 4 76 R_ERR response for data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x000a 4 8 Device-to-host register FISes sent due to a COMRESET
Thanks for any help!
Well, I solved the problem... Finally. http://UNIX.StackExchange.com/a/225781/41400
In case anyone else ends up with this... But I can't recommend get this model by car when they are intended for use with Debian...
Tags: SanDisk SSD
Similar Questions
-
I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.
Thank you.
Kelly
Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.
-
Looking for a NVIDIA nForce Serial ATA Controller Driver Update for Presario CQ5107C
Hello
The last two weeks, my computer, which is a Compaq Presario CQ5107C been freezing while I'm on it, and while I'm even not use without programs open. The pilot also missed a couple of times during use, but a message pops up saying something close to "driver recover successfully. Also, when I stopped it, it takes forever to stop and sometimes when I try to shut down properly, it goes to the blue screen and said that one of the drivers failed, which I guess it's my NVIDIA nForce Serial ATA Controller driver. My GetForce put up to date the most recent driver updated and there is no problem I know with whom. I read a litte autour my ATA driver can slow down and start doing this gel then go to blue screen if it malfunctions. I'm running on a 32 bit Windows Vista processor and have not yet update my Windows 7. I was looking for every possible way get an update for my ATA controller driver anywhere without having to pay for it. I guess I should upgrade to Windows 7 to possibly get an update. Update to Windows 7 would remove all the programs/personal off my computer files and if I had to stop the gel? Any help would be great because I searched everywhere and found the best solution yet. Thank you.
Here are the specifications of your Compaq Presario CQ5107C desktop computer. According to the specifications, it uses a GeForce 6150SE / nForce 430 chipset. The chipset driver is below.
Windows Vista/Win7 32-bit driver v15.49
Supoorts; 430 / GeForce 6150SE, 430 / GeForce 6150LE, 430 / GeForce 6150, 430 / Geforce 6100, 420 / Geforce 6100, 410 / GeForce 6150LE, 410 / GeForce 6100, 405 / Geforce 6100, 400 / Geforce 6100
Driver Ethernet (v73.14 +) WHQL
(V73.16) network management tools "Sedona".
SATAIDE (v11.1.0.33) WHQL driver
SATARAID Driver (v11.1.0.33) WHQL
Application RAIDTOOL (v11.1.0.30)
SMBUS (v4.74) WHQL driver
SMU (v1.71) WHQL driver
GPU (v190.38) WHQL driver
PhysX (v9.09.0428)
Away Mode Driver (v6.0.6000.114) WHQL
Installer (v7.57)
-
Win32k.sys caused BSOD IRQL, looking for likely causes
While I was recording game for a game with Fraps, I got BSODed with him saying that an IRQL_NOT_LESS_OR_EQUAL error has been generated by win32k.sys. I have debugged the minidump file and am looking for a reason why it happened. I don't see anything obvious to said in the report that is generated if:
Loading dump file [C:\Windows\Minidump\Mini071811-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol search path is: SRV * c:\symbols* http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows Server 2008/Windows Vista Kernel Version 6002 (Service Pack2) MP (4 procs) free x 86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
By: 6002.18327.x86fre.vistasp2_gdr.101014 - 0432
Computer name:
Core = 0 x 82036000 PsLoadedModuleList = 0x8214dc70
The debugging session: my Jul 18 22:01:47.823 2011 - 07:00 (UTC).
System Uptime: 5 days 2:05:24.971
Loading the kernel symbols
...............................................................
................................................................
.........................................
Loading user symbols
Loading unloaded module list
..................
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************Use! analyze - v to obtain detailed debugging information.
Bugcheck A, {9f5fffe4, 2, 1, 820cbc5b}
Probably caused by: win32k.sys (win32k! Win32AllocPool + 13)
Follow-up: MachineOwner
---------0: kd >! analyze - v
*******************************************************************************
* *
* Bugcheck analysis *.
* *
*******************************************************************************IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access an address pageable (or completely invalid) to a
application interrupt level (IRQL) that is too high. It is usually
caused by drivers using a wrong address.
If a kernel debugger is available, download the stack trace.
Arguments:
Arg1: 9f5fffe4, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, bit field:
bit 0: value 0 = read operation, 1 = write operation
bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
Arg4: 820cbc5b, address memoryDebugging information:
------------------WRITE_ADDRESS: GetPointerFromAddress: unable to read from 8216d 868
Cannot read MiSystemVaType memory at 8214d 420
9f5fffe4CURRENT_IRQL: 2
FAULTING_IP:
NT! MiUnlinkFreeOrZeroedPage + 87
820cbc5b 890c 10 mov dword ptr [eax + edx], ecxCUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0XA
Nom_processus: pcsx2 - r4600.exe
TRAP_FRAME: cac1b9fc-(.trap 0xffffffffcac1b9fc)
ErrCode = 00000002
EAX = ebx = 00000023 000010a 8 ecx = 00004600 edx = 00000000 esi = 00000000 edi = f68fc0a8
EIP = 820eb23a esp = cac1ba70 ebp = cac1bab8 iopl = 0 nv in pe of na EI pl nz nc
CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00010206
NT! ExpAllocateBigPool + 0 x 231:
820eb23a 895ffc mov dword ptr [edi-4], ebx ds:0023:f68fc0a4 is?
Reset the default scopeLAST_CONTROL_TRANSFER: from 820cbc5b to 82083fd9
STACK_TEXT:
cac1b7a0 820cbc5b badb0d00 88c8d8b8 83600000 nt! KiTrap0E + 0x2e1
cac1b824 820cbeaf 00049351 85e44478 400001d 5 nt! MiUnlinkFreeOrZeroedPage + 0 x 87
cac1b864 820ae467 000001d 5 86399030 c07b47e0 nt! MiRemoveAnyPage + 0x16c
cac1b8ac 820adce4 00000001 f68fc0a4 c07b47e0 nt! MiResolveDemandZeroFault + 0x2e2
cac1b968 820cf331 f68fc0a4 00000000 00000000 nt! MiDispatchFault + 0xadb
cac1b9e4 82083dd4 00000001 f68fc0a4 00000000 nt! MmAccessFault + 0x10c6
cac1b9e4 820eb23a 00000001 f68fc0a4 00000000 nt! KiTrap0E + 0xdc
57 000000 has 8 00000021 000010 82123c cac1bab8 has 8 nt! ExpAllocateBigPool + 0 x 231
00000021 000010a 0 35316847 nt a21664c9 cac1bb18! ExAllocatePoolWithTag + 0 x 116
cac1bb2c a214a4aa 000010a 0 35316847 and 00000000 win32k! Win32AllocPool + 0x13
cac1bb40 a216a2ee 000010 has 0 cac1bbe4 35316847 win32k! PALLOCMEM + 0X18
cac1bb5c a214a88d 000010a 0 00000001 and 00000005 win32k! AllocateObject + 0 x 97
cac1bb94 a21533c1 00000000 00000000 00000080 win32k! SURFMEM::bCreateDIB + 0x21d
cac1bc48 a2127c98 01010052 00000000 00000000 win32k! GreCreateDIBitmapReal + 0x320
cac1bce4 a2127f35 085a805c 00000000 00000000 win32k! _InternalGetIconInfo + 0xbe
cac1bd44 82080c7a 00010003 085a805c 00000000 win32k! NtUserGetIconInfo + 0xf1
cac1bd44 77d75ca4 00010003 085a805c 00000000 nt! KiFastCallEntry + 0x12a
WARNING: Frame IP not in any known module. Sequence of images may be wrong.
00000000 00000000 00000000 00000000 0x77d75ca4 085a803cSTACK_COMMAND: kb
FOLLOWUP_IP:
Win32k! Win32AllocPool + 13
5 d a21664c9 pop ebpSYMBOL_STACK_INDEX: 9
SYMBOL_NAME: win32k! Win32AllocPool + 13
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: win32k
Nom_image: win32k.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4d6f96aa
FAILURE_BUCKET_ID: 0xA_win32k! Win32AllocPool + 13
BUCKET_ID: 0xA_win32k! Win32AllocPool + 13
Follow-up: MachineOwner
---------So far, this was the only time where I had it coming, but I have not tried from new record yet. Actively running programs are FireFox, Pcsx2 and Fraps. However, I ran these before without this issue arise. I'm inclined to think that this is a time to screw that maybe something has been registered correctly or incorrectly read memory.
Hello
References to Vista also apply to Windows 7.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html==========================================
Tests of memory intercept all errors such as memory do not match (possible even for sticks
seemingly identical) and when the faster memory is placed in system behind the slower memory.
So it is best to Exchange also glue in and out to check for those, even if all the tests of memory do not respond
a problem.To test the RAM here control - run 4 + hours or so.<-- best="">-->
www.memtest.orgFor the Windows Memory Diagnostic tool.
Start - type in the search-> memory box - find top - click - right Memory Diagnostics tool
RUN AS ADMIN follow the instructionsWindows Vista: How to scan / test your RAM or memory with Windows Vista Memory Diagnostic
Tool
http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/How to run the diagnostic tool memory in Windows 7
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Installation & looking for drivers XP for Satellite P200 - 1C2 Solution
I see here many have problems with installing windows and drivers for xp.
XP installation
A normal sp2 installation cd will not be able to install windows on the laptop. You need the S - ATA for Intel drivers.
You can download the site http://www.Intel.com or
http://www.connect.de (search Intel_SATA_965.zip)This driver is for XP and Vista, a Core 2 Duo processor.
-Download nlite to www.nliteos.com.
-Copy the files from your xp cd to a folder on the hard disk as C:\XP_CD
-unpack the drivers to a folder on the hard disk
-launch nlite, choose the xp folder and continue
-ignore the form 'sessions' and continue
-Choose pilots and the possibility to make an iso and continue
-Open the drivers with nlite (folder with multiple files)
-Click on the name of the driver one continue with ok
-choose "textmode driver" mode and select all drivers in the list box (use ctrl)
-continue to nlite and burn on a cd setupNow you can boot from the cd and install windows xp
Audio driver
Many have problems with the audio driver, it does not work. Here, I explain how I solved the problem on my laptop:
-go to the Device Manager
-look for uninstalled 'pci device's
-Right click on it and install the driver
-Let windows automatically installs the driver, it will show one uninstalled HD Audio definition Driver
-Now, you install the Realtek driverDisplay driver
For my laptop, there is no screen driver download for xp, here I explain to ati, how to install the original driver
I Don t know how to solve the problem with nvidia graphics, but maybe there, he works to-Download driver catalyst newes at amd.com
-try to install, it will make a folder in C:\, but won´t install
-go to the Device Manager
-Right click uninstalled the VGA card and choose install driver
-take the last option, the auto driver, continue
-ignore the next form and continue
-choose to install the driver of a data medium
--aller go to C:\ATI\Support\Drivers\, find the inf file and open
-Choose your graphics card for example Ati Radeon HD 2600 Pro
-install the driver, windows will say, the driver may not work, but it works![Edited by: admin]
Very useful and interesting display. I m missing information.
Could you please say what laptop do you have? -
I have a Lenove with Windows 7 Home Premium 64-bit of the system. Yesterday I got stuck in a loop while looking for a dog boarding on Google. I had to do a system shutdown to break out of the loop. Since then, I get the message: «Host process for Windows services has stopped working...» "Also, I heard the music or script play twice since then and did a reboot to get rid of the problem. I don't know that it will continue if I do not resolve what has caused the problem initially. Also, I went into the control panel one checked all the sound icons and they are all OK.
I'd appreciate if someone could give me some instructions on how to solve these problems. Thank you!!
Click on Start and open the Control PanelClick on System and select Advanced system settings in the left menu.Under performance, click settings.Click the Data Execution Prevention tab, then enable DEP for all programs and services except those I select.Select the check box next to the program that you want to turn off DEP for and then click OK.For older (if you want to turn off DEP for IE. Click Add: enter OS 32 bit (Internet programThe Explorer and select iexplorer.exe) | 64 bit OS (Program Files (x 86) \Internet explore and select iexplorer.exe)Select the check box next to the program that you want to turn off DEP for and then click OK.Restart the PC and use the IE32 againNote: You can not set DEP to 64 bit IE -
My work of pl/sql procedure; I am looking for someone to test it
Hi all
I wrote the below the procedure to run through APEX (inside the APEX_PLSQL_JOB. SUBMIT_PROCESS wrapper).
It works fine, but I'm not a programmer and I'm just curious to know if one of the veterans on this forum could review
and just tell me if it looks that I followed the standards/procedures etc. or make suggestions on how I can be most effective, etc..
The procedure is intended to update the Applications Oracle translations tables language reflects the values that we have
accumulated by our global workforce. It's pretty simple - just a big find and replace exercise - replace English values in applications
tables with translated values. "_TL" Oracle tables are designed for this purpose and I'm not updating of the primary or foreign keys.
I don't know the exact update statement or an instance at run time, and hence the need for a DB link and dynamic SQL statements.
Still, there is not (yet) problems - everything works fine, I'm just interested in someone who review it and give me some comments.
Thanks in advance,
John
create or replace procedure GSE_UPDATE_TL_TABLES (l_instance IN varchar2, l_app_job IN number) IS l_tname varchar2(30); l_column_name VARCHAR2(30); l_col_value VARCHAR2(4000); l_eng_value VARCHAR2(4000); l_language VARCHAR2(4); i number; l_query VARCHAR2(4000); l_messages dbms_output.chararr; l_numlines integer := 1000; -- retrieves max 1000 messages from the buffer l_rows_updated number := 0; l_rows_processed number; CURSOR TABLES_CUR IS SELECT TABLE_NAME, COLUMN_NAME, COLUMN_VALUE, eng_value, LANGUAGE FROM GSE_LNG_STRINGS WHERE COMPLETION_STATUS = 'Y'; ---This table is our repository of translations and includes the english value, the translated values, the language code and the table and column names that will be updated. BEGIN DBMS_OUTPUT.ENABLE(1000000); delete from gse_update_tracking; ---I'm using this table to track real-time progress and to update a progress status bar in APEX. commit; open tables_cur; LOOP fetch tables_cur into l_tname, l_column_name,l_col_value, l_eng_value, l_language; EXIT WHEN tables_cur%NOTFOUND; BEGIN EXECUTE IMMEDIATE 'Update ' ||l_tname||'@'||l_instance||' set ' ||l_column_name|| ' = q''['||l_col_value||']'' where ' ||l_column_name|| ' = q''['||l_eng_value||']'' and language = '''||l_language||''''; l_rows_updated := (l_rows_updated + sql%rowcount); insert into gse_update_tracking (counter) values (1); commit; exception when dup_val_on_index then l_query := 'Update ' ||l_tname||'@'||l_instance||' set ' ||l_column_name|| ' = q''['||l_col_value||']'' where ' ||l_column_name|| ' = q''['||l_eng_value||']'' and language = '''||l_language||''''; DBMS_OUTPUT.PUT_LINE('This query caused DUP_VAL_ON_INDEX exception: '||l_query); when others then l_query := 'Update ' ||l_tname||'@'||l_instance||' set ' ||l_column_name|| ' = q''['||l_col_value||']'' where ' ||l_column_name|| ' = q''['||l_eng_value||']'' and language = '''||l_language||''''; DBMS_OUTPUT.PUT_LINE('This caused an undefined exception: '||l_query); end; End Loop; l_rows_processed := tables_cur%rowcount; update gse_lng_jobs set rows_processed = l_rows_processed, rows_updated = l_rows_updated where job_id = l_app_job; close tables_cur; begin dbms_output.get_lines(l_messages, l_numlines); for i in 1..l_messages.count loop insert into gse_lng_update_exceptions(id, text, Job) values(i, l_messages(i), l_app_job); commit; end loop; end; END;
I am doing this? [.. .commit * after * loop...]
Yes, please.
See, for example:
http://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:4951966319022 -
Problems with three fingers looking for preview
Hi all
So I've upgraded to Mac OS Sierra the other night and it was absolutely great so far. However, there is a feature I noticed is either absent, either turned somewhere off the coast, and it is three fingers look upward in the preview. I'm at school and do a lot of my reading on a PDF in preview, and yes I just came across a few words that I don't know the definitions to. In the past, three fingers look has been one of the best features for its quick access to definitions. This is something I really miss and hope that it will be always possible somehow.
Now, I noticed that it only worked in other applications as well, I went to settings and looked for the feature. I was able to find it in the settings of the Trackpad and he turned his back. That seems to have worked for just about every other app except Preview. If anyone has solutions to this problem, I'm all ears!
Thanks in advance guys!
It works for me in preview. However, it took several 3 finger taps to finally get the context menu with 'Look Up' inside to provide the result below.
-
How can I get Firefox looking for my computer for the plugins that are already there?
How can I get Firefox looking for my computer for the plugins that are already there?
Adobe Flash player is already on my computer from IE 8. How can I get Firefox to see that it is already on my PC and use it so I don't have to download it again and possibly create other problems. Also, in my efforts to download Flash, active Firefox IE that made me concerned that would cause problems that our just leave me where I am now, instance where IE can use a bottle but Firefox cannot.
Internet Explorer uses a version of the Flash player ActiveX plugin as it does not work with other browsers.
Download the version of the https://www.adobe.com/products/flashplayer/distribution3.html Plugin-based browsers and make sure Firefox is closed when you install it.
-
I'm looking for support migration Eudora 6.2.4 to Thunderbird
I was hooked to a program archaic mail Eudora (6.2.4) for many too long because I knew not how to migrate, all settings, addressbook, filters, folders, etc. for Thunderbird. Accordingly, I am always under Mac OS 10.4.11. I'm looking for support to the transition.
Email removed by the moderator of the forum for your protection - M
As far as I understand the process (I have not used Eudora for more than 20 years) import takes minutes, not days. Also, if I understand correctly, if there is something corrupt in the Paris Eudora files are open. It is somehow a fragile process that according to me is the involvement
Please see this. Although it is old information, he is still topical because Eudora import really has not improved. Maybe EudoraRescue will work for you.
-
You are looking for an extension in order to reduce the size of the image
I often need to reduce the size of the screenshots. Looking for an extension that would allow me to do this in Photos, without the need to export, and then import them back. It's a simple task, but I could not find a way to solve this problem. There are many applications with extensions that allow cropping images, but the apps/extensions similarly dedicated screenshot cannot reduce the size.
The feature I need, it's essentially the only preview offers under the menu set the size as a percentage or in pixels change. Special bonus for an app/extension that would work also on the pictures for iOS.
This is not possible - you can never make any change to the contents of the library - the only way to reduce the size of the image is by exporting using different size options in the window export
You can use a preview an external editor with external publishers for extension of pictures - I have no idea of what would be the results with that
LN
-
Especially anytime I boot vista and use firefox to load the first page of interest of any Flash Player on this page, the Computer freezes.
My mouse to tail (on the screen) will have multiple pointers, showing that the action of the mouse on the screen's show and then suddenly stops leaving the mouse pointers of 4-5 spread on the screen.
When I say freeze, I want to say keyboard does not work, no option to see taskmanager, possible extra mouse no movement, no keys work.
Then, it does nothing except totals action HD for several seconds (5) and then after that, everything is ok.
I took the time that this has happened (looking clock screen) and returned with a search for the Explorer for the date and time to find all the files that had we created or modified during this time - nothing has changed - so the other question is how is it, nothing has changed when my HD was going ballistic (solid green light)?
Since then I uninstalled FP in FF and removed my computer adobe.
Thank you for your interest
Upgrade to Firefox (26)
-
Please recommend what to look for in an external drive for my Macbook Pro
I don't have a lot of data, but I'm a writer and want a back up of novels and photos and photo projects. Can someone knowledgeable tell me what to look for in an external drive? I said to get one with a fan, but have seen highly recommended to those without a fan.
Thanks in advance,
NanaCA
If portability is a requirement, such as this storage drives will do:
http://eShop.MacSales.com/shop/FireWire/on-the-go
If the HARD disk will live on the desktop all the time, your choice increases. Here are a few more examples (and there are more):
http://eShop.MacSales.com/shop/FireWire/EliteALmini/eSATA-FW800-FW400-USB
http://eShop.MacSales.com/shop/FireWire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
The fans are not always essential if the design of the enclosure is made correctly.
There are many publishers and other options are available, but OWC is a good seller with excellent customer support.
Note that anything that is stored on a disk external HARD must also be safeguarded if the data has the value.
Ciao.
-
Designjet Z3200PS Q6721B: Looking for old firmware for Designjet Z3200PS Q6721B?
I've been fixing this mchine for over 2 months & never being able to finish since, even I already updated to the latest firmware, I have download from the HP Web site, I still don't have 79:04 after printer initialized 100% and never be able to load a roll of paper to make a print head alignment.
Belt, service station, transport box, printheads, inks, tape Corder, all perfectly.
But today I upgraded to the latest firmware again, once all 100% the machine firmware downloaded PC, then
the reboot of the machine by itself. I stood beside and I saw after reboot & 1% apeared, then when he reached on
60% & hour glass appeared & disappeared quickly, then bip & machine will restart. I tried again 2nd time and same.
My other Z3200 44 "you always at 100% and why it only got to 60% & reboot by itself?
I suspect the error 79:04 may associated with the unfinish firmware update?
I'm looking for a link to download the old version to try...
Thanks for your help.
Finally I found what was wrong with error 79:04 of this printer when trying to load paper.
Today I tried to delete the transport box & broke out in the center of the pulley, which has been the reaon when
proposed per proposed transport and the belt box by unevenly and caused the error immediately.
Happy another problem solved & fixed printer.
-
I blocked a YouTube video using the block tab has appeared it on the top right of the video. Now, I don't see any video. All I see is a black screen. How can I disable this add on? and where I looking for her?
Thank youIf this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.
- Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
- Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
Maybe you are looking for
-
Satellite L50 - B - 1 HM overheating problem
Hello I have a problem with my laptop, but for what I really need help is to contact/speak with someone on my current fix a petition (see last paragraph) The problem started with my laptop (serial No. YE280915C) making a noise of a piece loose in the
-
Windows Update, error 0x80072EFF
Try to update receive this error code
-
Audio on Windows Media Player not working not not on DVD only
No sound on DVD playback. Music CD works fine, as the general computer audio. Mute is not on. This has happened between a start and another. Maybe had something to with a nuisance 'Power DVD' (may be not the right name) program this dominant kept
-
Two questions: Windows Vista and XP on HP a6130n
A6130n HP from my father (AMD Athlon 64 X 2 dual processor running Windows Vista) had a hard drive crash. I replaced the HD and tried to recover using the recovery discs, he has created. He was suspended during the recovery process of system usually
-
How to rotate the image in movie maker a few degrees to get it exactly horizontal
If my camera was slightly off level during recording, how I rotate the image a few degrees in Movie Maker to get this level