CC and CS6 file sharing

Similar Questions

• Installation of CS 5.5 and CS6 files

  I move to a new machine. I tried to install older versions to backsave. I managed to get CS4 installed (CS3 would not install on Windows 7), and then CS5 installed from the original CD. I must have downloaded CS5.5, and I don't know that I downloaded CS6. I can't find the original installation files for CS5.5 and CS6. I can't believe I deleted the. I just have put them it hard to find somewhere. Does anyone know the file name of the exe to install CS5.5 original? Or if Adobe made this is available for download somewhere? I download the demo version of CS6 now, and I think I should be able to enter my license and activate it (right?).

  Ken Benson

  Correct the CS6. For CS5.5 see this link and follow directions exactly:

  http://prodesigntools.com/Adobe-CS5-5-direct-download-links.html

  Bob

• Windows 7 and xp file sharing: accessible files, others not

  I have a desktop Windows 7 (Ultimate x 64) which share several folders to other computers, mainly under XP (Home). This is pretty typical and I'm not having any problem setting this up, it was already setup and works well so far.

  However, I recently added a new sharing folder of the Windows 7 computer. What I find is that some of the files in the folder are accessible, and some are not. It is unusual because generally I see that the file is accessible, it is not, but never a few things inside. I would say half the files are accessible, and half are not.

  When you try to access some files, I get the message: "file not found". Yet, I see all these files when displaying the list in Explorer directories. This could be the cause?

  I tried to remove the share on the Windows 7 computer and recreate from scratch. By doing this, it fixes some of the files that were previously inaccessible, so they become accessible, but other files are inaccessible.

  Solving the problems of shared folders

  Open the Troubleshoot shared folders utility by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under network and Internet, click access shared files and folders on other computers.

  The above is an excerpt from the page below (at the bottom of the page):

  Share files with anyone
   http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  Kind regards

• How can I disable the file sharing without Windows Firewall is turned on? (I use Norton 360 and he doesn't have two firewalls running at the same time.)

  When I go to the "network and sharing" and try to disable file sharing, it automatically turns on the Windows Firewall. I want to be able and disable file sharing and disable the Windows Firewall (I use Norton 360 firewall). Any ideas? Thank you.

  Hello

  Check this box

  How to enable file sharing enabled or disabled in Vista
  http://www.Vistax64.com/tutorials/126388-file-sharing-turn-off.html

  If no joy collate Support Norton/Symantec and Forums

  Norton support
  http://www.Symantec.com/support/index.jsp
  http://www.Symantec.com/Norton/support/DTree.jsp?PVID

  Norton forums
  http://community.Norton.com/Norton/?category.ID=NIS

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Impossible to activate permanent "network discovery and file sharing" in advanced sharing without turning windows firewall at the wide service.

  Environment:

  I have a workgroup Windows 8 pro PC with all updates from Windows update. The PC is connected via WiFi (home) to a router (the same thing happens if I am connected to the router directly via RJ45). It's my "private network (NAT). I have the Windows Firewall is enabled in its default configuration. I use "Windows Defender" as my protection\firewall of virus software.  "When I go to: change options for sharing different network profiles" under advanced sharing options. I try to turn on file sharing and network discovery in the private profile. It shows that "the private sector is the current profile. The radio button lights. However, when I go to the file Explorer / network I got the message ' network discovery and file sharing are turned off. " The network computers and devices are not visible. Click here to change... " I click to change, however when I click to change it keeps returning and gives me the same message. I then go in ""network control and Internet\Network and sharing Center\Advanced sharing settings " and the option buttons in private profile for the network discovery and file sharing are turned off."

  If I turn off the Windows Firewall. Everything works. I need to open a hole in the windows firewall for 2 applications was discovered and network file sharing. I opened rather not just blindly ports. However, if this is the only solution, what ports do I need open.

  Hi all

  I have exactly the same problem.  (and I'm not the only one. - There are many!) The problem does not lie with the Windows Firewall. If I turn it off, discovery network and file sharing is turned on-tour he turn it back on and its all disabled subsequently and the rest of the way.  I've been round and round the forums of the world looking for a solution but still find a definitive answer. Can certain software engineering in Microsoft Please arrive at the correct answer.

  Thank you very much

  PT.

• Remote Desktop connection and file sharing

  Hello, I have a technical question about file sharing.

  I use a remote desktop connection to connect to the server of the company.  We are currently between the two groups of IT services (last guy retired, he will be missed!) In any case, I need to backup my desktop files locally and have 4 or 5 of these local desktop file files saved as a backup on the server.   I want to just my files desktop back mount easily on the server. And I don't know how / what to ask to do this. I just need to know what to ask.

  I'm having problems:

  1. I don't know how to configure a file to save its content on and through a secure server.

  2. There are two types of files that I am trying to backup my office.  The details are below.

  2. the first type of files are simple files of customer data, PDF files, word files, files is excellent. Thus, some records are filled with the updated forms and these files constantly increasing in number and size of the file.  A simple example of this type would be a Bill.  File grows in size and file number every week because the new files are always being added.

  2B. I can't accurately describe the second type of file.  We use a program called TFP - when you open the program you load the specific customer file in a drop-down box.  Whenever you open the customer specific AMTS program saves any changes you made to this file and updates the customer file with a new date and then transfers the file from the client to a file from archive in C: drive. Basically, I want to save this file on the server of the company.

  3. can we make us safe so that data gets only shared a way?  I don't want people on the server to change my desktop files.

  Feel free to ask any questions.   Thank you in advance.

  David

  Hello

  You can request the assistance of here:

  https://social.technet.Microsoft.com/forums/en-us/home

• Problem between Windows XP Home and Windows 7 Starter of file sharing

  Hello, I have a problem with file sharing: my desktop computer running Windows XP Home Edition and my netbook runs Windows 7 Starter Edition.

  On Windows XP, I shared a folder: Win 7 is able to open the directory and the files in the list, but there is no way I can open any file in the folder XP, nor that I can transfer the any of these files to my netbook.
  All I get is an error "access denied."

  The XP Workgroup is the same as the 7 home network, and the users have all the privileges on both computers.

  Can you help me to sort out what is happening, please?
  Thank you.
  B.

  As a first step, you have XP Home, which means that the 'Simple file sharing' is applied on this machine.  In addition, this means that any network connection on your XP Home of any another machine machine is forced to authenticate you as a user 'Guest', regardless of what a privilege that may be the real user.  In from here, it would seem that the 'Guest' user doesn't have privilege for the files or folders that you share.  To resolve this problem, you must change the access permissions to these files.

  If you drag (move) files on your computer in your share folder, the origin on the file permissions will be maintained.  On the contrary, I would say that you copy the file to the shared folder by dragging with the right button of the mouse and select 'Copy' instead of 'move '.  A copied file will end with permissions for the destination folder that will be generally more suitable for sharing.

  To the files and folders that are already in this folder, to change permissions, you must Access the 'Security' tab under the Properties screen.  In XP Home, this is possible if you log in as administrator in "safe" mode  To start your computer in Safe Mode (repeatedly tap the F8 during the startup key key), connect you as an administrator user, navigate to the file or the folder with problems of access, right-click on it, select 'Properties', select the 'Security' tab and set security such as 'everyone' (or 'guest') has the privilege of access you want.

  HTH,
  JW

• How can I connect Windows XP to several networks, Wi - Fi for internet and the other for file sharing?

  On windows XP, I need to connect to two different networks. Free wifi for the internet and the other for file sharing.

  Different gateways, different static address, same subnet mask. But there is problem when operating simultaneously and must

  a network must be disabled. Is it possible to run simultaneously?

  original title: served various networks simultaneously on windows xp

  Go to where you have configured the static IP addresses for your network adapters.  Leave the "default gateway" blank for your local file sharing adapter and insert a valid default gateway for your wifi Internet adapter.  Of course, this will limit your adapter in a single subnet - which should be OK for use at home or small office to share local files.

  This should work as long as the two physical subnets have two different subnet numbers. In general, this means that the first three digits of the IP address of the adapter can not be the same on both adapters - if they are, then you need to make one of the subnets. (i.e. one is 192.168.1.xxx and the other would be 192.168.2.xxx).  This is usually accomplished in the router configuration page.

  HTH,
  JW

• Network discovery, file sharing settings keep changing by itself and Alltel to set the network location continues to ask the wireless device

  former title: network location settings. Discovery of NW. File sharing. public folder sharing. AVG 9.0 'tools' and network connections.

  My Alltel Wireless device again set the network location. And continues to change my network settings for the discovery of NW to:, as well as file sharing for: file public and sharing: read-only.  I have AVG Security 9.0 and under 'tools' and connections network shows several svchost with States reading service connections listening and unknown. I don't want no access to my computer and cannot find any computer consultants who can get this to stop. What can I do?

  Hello
   
  1. the options apply automatically on?
  2. have you made changes on the computer recently?
  3. have you installed any Alltel Wireless application to manage network connections?
  4. What is the current network location type on? Is it home, work or public?
  Network discovery and file sharing settings depend on the network location. For examle, if you set the network as a public location it turn on file sharing.  So I would ask you to turn all the parameters and then choose the type of network and check if the parameters change again.
  
  Method 1.
  I recommend you to check if the problem exists in clean boot. May be a third party application is causing these changes.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  Method 2.
  Also check the settings under tools in AVG security suite. You may need to check with the help of AVG on it.
  Or you can disable the antivirus software and check if that causes this behavior.
  Temporarily disable the security software installed on the computer and check if the problem persists.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Centre network and sharing that network discovery, file sharing, and media sharing turned on, should they be on or off? It's on my home computer and I do not share anything

  just noticed on my network and sharing center that the network discovery, file sharing, and media sharing turned on, should they be on or off? It's on my home computer and I do not share anything thank you.

  If you do not share with another PC or XBOX Media Center, then your file and media sharing must be turned off.

• Problem of file sharing between Windows 7 and Vista using a working group

  I use a working group and have a shared folder on a computer that is running Windows 7 Home Premium. I'm trying to access the file from a computer on the same workgroup that is running Vista Business. It requires a username and password that I turn off password protected sharing on both computers and tried all combinations of accounts and passwords on both computers, but can not get access to the file. I'm sure I'm missing something and you would appreciate the help.

  Hello TamiRigby,

  Take a look at this thread for instructions with reset the permissions file and folder to a specific folder in Windows Vista:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/how-do-i-reset-folder-permissions/b186a591-88ca-4FEE-a7a6-25d071dde820
  I suggest you try this with the file you are having problems sharing.

• network discovery, file sharing and public folder sharing won't turn on if the ethernet cable is removed and plugged

  Public folder of Windows Vista sharing problem.

  Whenever my pc is disconnected from the internet sharing files turns back on. Options: network discovery, file sharing and public folder sharing will turn on if the ethernet cable is removed and plugged. How can I prevent this from happening.

  Hello

  1. Since when are you facing this problem?

  2. don't you make recent changes?

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  For more information, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

  It will be useful.

• I've set up file sharing in Windows Vista, and it shows that all folders are shared even before I share them.

  original title: sharing of Windows Vista

  I've set up file sharing in Windows Vista, and it shows that all folders are shared even before I share them.  When I go the file that he always asks if I want to share the folder and when I look at the properties he says not shared... what happens?

  Hello

  I suggest you to read the following article on the essential elements of file sharing and to try to share the files again.

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-sharing-essentials

• Windows vista and playstation 3 - I do not know how to get my PlayStation 3 appears on my network and I don't know how to enable file sharing

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Less error have a playstation 3 and windows vista. I have a combination of problems aggravated by not being not very Internet / computer savvy. The issue is around file sharing and lower my firewall. I don't know how to get my playstation 3 appears on my network and I don't know how to enable file sharing. at one point, the RAD icon appeared and without changing anything, he disappeared. I can follow the simple instructions but my absence I have a playstation 3 and windows vista. I have a combination of problems aggravated by not being not very Internet / computer savvy. The issue is around file sharing and lower my firewall. I don't know how to get my playstation 3 appears on my network and I don't know how to enable file sharing. at one point, the RAD icon appeared and without changing anything, he disappeared. I can follow simple instructions, but my lack of expertise is really crippling my ability to do for himself. I tried to lower my firewall (not sure if I did) but I need to be walked up to the baby step by baby stepof expertise is really crippling my ability to do for himself. I tried to lower my firewall (not sure if I did) but I need to be crossed self-study baby baby
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Google comes up with these:
  http://www.ehow.com/how_5074747_network-PlayStation-computer.html
  http://www.ehow.com/how_2216306_add-PlayStation-3-LAN.html
  http://www.Google.com/search?q=network+a+PlayStation+and+a+home+computer&start=10&hl=en&SA=N&RLS=com.Microsoft: en - us & prmd = ivns & to source = univ & to TBS = vid:1 & to tbo = u & ei = PrtKTanFLMmCgAfjscnVDw & to oi = video_result_group & to ct = title & to resnum = 10 & ved = 0CGoQqwQwCTgK
  http://www.absolute-PlayStation.com/PlayStation-Network/expert-PlayStation-3-hardware-accessory-help-PlayStation3-PS3-console/10631-PlayStation-3-wireless-connection-setup.html Brian Tillman [MVP-Outlook]
  --------------------------------
  https://MVP.support.Microsoft.com/profile/Brian.Tillman
  If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

• Network discovery and file sharing will not stay

  The bar notification on the screen of the network in Windows explore said that discovery of the network and file sharing are turned off and click to change. After a right-click and by turning on the network discovery and file sharing, the notification bar appears again and said the same thing.

  I have ensured that the services are running, and appears not to have solved things. I am able to ping other computers that I know are on the network.

  I didn't have this problem until a few days ago, and the strange thing is that I am able to access other computers on the local network via the \\computername method. However, access my computer from other computers or devices miss you

  Any help would be greatly appreciated. Thanks in advance.

  I realized that guys on my network have not been able to ping - me, so I did this:

  http://superuser.com/questions/375100/what-happened-to-my-predefined-rules-in-Windows-Firewall-how-can-i-get-them-b

  I activated adding predfined advanced and enabled firewall rules all incoming and outgoing in the file and printer sharing. Now, everything works fine.