CC has captured my non - CC of the CS6 PS version

Similar Questions

• Cannot start the CS6 evaluation version

  I downloaded and installed a trial of the CS6 and Web Design package on my Mac (OS 10.6.8). When I click an app CS6 to launch it, I get a window with some videos and two buttons, one for the software license and who says to start the trial. I click Start the trial, the window disappears and the application does not open. nothing happens. Whenever I click on the apps to start, I get the same window again. What should I do to start the trial apps?

  Your licnesning system is broken. Run the Creative Suite cleanup tool, reinstall. For more specific questions see this:

  Error "Licensing has stopped working". Mac OS

  Mylenium

• My Acrobat has stopped working.  I have the CS6 Master Collection.  I had this happen before and I had to reinstall with the entire suite.  Is this stil the best way to deal with this?

  Sorry, meant CS6.

  Hey Gary Kirby,

  Please make sure that you are connected to your system as administrator.

  Let me know the exact error that invites on your screen when launching Acrobat.

  You might also check out this link to doc KB and try solutions as indicated:

  Does not start after 30 days. Installed as part of a suite CS6

  Please check and let me know.

  Kind regards

  Ana Maria

• Cannot use the CS6 trial version

  Hi, I installed the trial version of CS6 and I can't use it, it says my trial version has expired, but it's not just it ' the first time I instaled it

  What's going on?

  your options are to use another computer for trial, reformat hd to your current computer or renounce testing.

• Creative cloud still gives me the CS6 PowerPC version.  How to get Intel?

  When I install Encore CS6 thanks to CC for OSX, I get only the PowerPC version, which I can't run.  How to install the Intel version?

  Petebooks I recommend you to check your Setup logs for any errors received during the installation process. Please see the problems with the Setup logs. CS5, CS6, CS5.5, CC - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to locate and interpret the installation log files.  You are invited to post specific errors that you will discover in this thread.

  Too often these types of errors can occur when the installation files are corrupt.  Have you tried to download and install more than once?  You have a stable, high-speed Internet connection?

• I'm running into this error message to a sysprep to capture a WIM image modified: "a fatal error has occurred while trying to sysprep the machine."

  Original title: WDS & Sysprep

  Hello

  I'm running into this error message to a sysprep to capture a WIM updated image the:
  3.14 system preparation tool
  "A fatal error has occurred while trying to sysprep the machine."
  She is probably explained by the time of Amendment 3, but is there a way to bypass that force me to change the registry whenever I use the new image?
  Any recommendations on how to solve this problem would be appreciated.
  Thank you.

  GN

  Please post your request here:

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itproinstall&filter=AllTypes&sort=lastpostdesc

• Is there a way I can personally verify my I Pad Pro to see if it has been refurbished, because I paid the FULL PRICE $$$ for this but have not begun it upwards again and I have a suspicion, it is refurbished? Can I bring to an APPLE STORE and have it chec

  Is there a way I can personally verify my I Pad Pro to see if it has been refurbished, because I paid the FULL PRICE $$$ for this but have not begun it upwards again and I have a suspicion, it is refurbished! Can I bring to an APPLE STORE and have them check for me?

  * Because if it is I never purchases in this store ever again, but I WANT it CHEKED OUT by myself if I can.

  Please help as soon as POSSIBLE due to delays return date.

  Thank you all

  Makes you think about the iPad Pro you received is a refurb?

  Apple, general, selling and shipping of refurb in the plain, non-description boxes/packages.

• the lower part of the screen has a gray as Monica covering the screen

  How can I fix a problem with my laptop screen?

  The upper part of the monitor is nomal and works very well. But the lower part of the screen has a gray as Monica covering the screen. The two sections are divided by a straight line. The laptop in this condition it is difficult to do, because the bottom of the screen is so hard to see. Any help with this condition would be appreciated. The laptop is a Toshiba Satellite L305D-S5868, I can't afford to buy another laptop. Please someone help!

  Hi CliffordKillen,

  What version of Windows have installed you on the laptop?

  When did you notice this problem? If this is a recent problem, follow the steps in this document to restore your computer to an earlier point.

  Follow these steps in this document to start your computer in Mode safe. Safe mode that will start the Basic programs and drivers required to start Windows. If the screen is back to normal in safe mode, it lets us know that the issue is not the base drivers. We can then pass from the computer in a clean boot State. This will let us know if a software conflict is causing the problem.

  If none of these measures, you can contact Toshiba.

• I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.

  Hi gullo56,

  Welcome to Microsoft Answers Community Forums.

  To help you better I would ask,

  a. If it functioned very well under Windows 7 before?

  ·         I suggest you to disable your firewall security software and check if you are able to play the game.

  From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=combat%20flight%20simulator%203

  1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.

  For information about how to run a program in an earlier version of Windows, visit the link below,

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  2. you can also try to reduce the hardware acceleration and check if it solves your problem,

  1. Click Start-> Control Panel-> appearance and personalization.

  2. under customization, click on adjust the screen resolution.

  3. in the display settings dialog box, click the Advanced Settings button.

  4. in the monitor Properties dialog box, click the Troubleshooting tab.

  5. click on the change settings button.

  6. in the Security dialog box, click on continue.

  7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.

  8. click on OK.

  9. restart Windows.

  Hope this information helped you.

  Kind regards

  Arona - Microsoft technical support engineer

  --------------------------------------------------------------------------------------

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Final Fantasy XIV has stopped working a problem caused the blocking of the program works correctly. on VIsta 64 bit...

  Final Fantasy XIV has stopped working a problem caused the blocking of the program works correctly.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1: So that the game takes place effectively, your computer should meet all the minimum hardware and software requirements.

  Make sure that your computer can run the game.

   

  Method 2: Try to reduce (or turn off) video hardware acceleration by following these steps.

  Instruction to change hardware acceleration:

  a. open the resolution of the screen by clicking on the button start picture of the Start button, click Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.

  Note that some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.

  Note: If you reduce the hardware acceleration resolves the issue, you may need to update your video card drivers.

  Method 3:  Updated graphics card drivers and see that helps.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: You can also try to run the game in boot.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• My mac has crashed and need to transfer the app to another computer.

  My mac has crashed and need to transfer the app to another computer. How do I do that?

  You do not transfer, you are doing a new installation

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  .

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• How would you like non-destructive change the color of some pixels depends only on their RGB value?

  How would you like non-destructive change the color of some pixels depends only on their current color?

  Constraints: the goal is to avoid having to select with the lasso tool or any other tool. I'm talking about adjustment layers here, who would not need to select parts of the first image.

  The input image has only a haldful of discrete colors: it is made of, say, about 10 areas with 10 different colors, alias 10 different RGB values.
  

  The goal is to find a way to organize the adjustment layers and only pixels with given RGB value (for example) blue, while some other pixels with another RGB value data become red, etc. ?

  I will then apply these to each image adjustment layers in an animation, to selectively change the colors.

  If I understand you correctly, "Mix" so should work.

  Here, you can target specific values/ranges in each channel, for the underlying layer and current standards.

  

• I have the macbook pro. I can't open lightroom CC on my macbook pro. Messages of air - "an internal error has occurred. It cannot create the required folder.

  I have the macbook pro. I can't open lightroom CC on my macbook pro. Messages of air - "an internal error has occurred. It cannot create the required file"Please help me. I tried various solutions on the web. None of this has worked.

  Please run repair permissions from disk with disk - Apple Support utility

  ~Assani

• My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is installed and running on the SSD, with my old drive system currently used for storage a

  My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable.  The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop.  Can you tell me the best way to do it?  -Thank you

  If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• Help with settings in the capture of a 1968 for the Production of DVD movie

  I have a problem with the Premier Pro and need help.

  I'm on a date limit to change a feature film (01:27 long). It's a job home with, unfortunately, not a lot of knowledge on Premiere Pro. It must be sent in MPEG2-DVD (which I don't know how to do). My problem in the import of DV cassettes. I know how capture of the Sharp VL - AX1 I use to read the tapes. He appeared in Premiere Pro, etc.
  
  My problem is with the settings. I set up the Premiere Pro with Standard DV NTSC 48 kHz, and then click capture. While the small screen on the Sharp VL - AX1 shows scenes with just a small black band (1/2 inch?) on the top and the bottom of the actual scene, the import/capture on the PC screen appears on a screen wide once he starts the capture and everything is elongated horizontally. I tried variations for the last month, but I'm stuck right here. The film was shot in 1968 and is wider; wide screen just not. When I try the implementation of big screen, the capture on the PC screen is just as broad if not broader.

  
  

  The film has been digitized from the original 35mm copy by a professional company in Texas. I'm just trying to correct some color problems and send it to them for the production of DVD. They use Avid, so they cannot make the same color of correction, etc., work I want to do.

  I would like to import from DV tapes in the best possible quality, tweak it a bit and then export it to a (probably mpeg2-DVD) format, which they can use to make the additional editing (DVD menus, etc.) for the production.

  
  

  Here is a picture of what appears on the screen of the Sharp VL - AX1

  
  

  

  
  

  Here is a picture of what appears on the screen Capture in Premiere Pro (CS5)

  
  

  

  
  For any help or suggestion will be appreciated. I have this project done Friday.

  
  

  George

  The telecine like a 4:3 letterbox wasdone: that's why you see black bars in the capture window. However, the transfer to the band (or perhaps the capture of original sequences by the transfer device) has reported that 16:9; First recognizes that flag, and that is why the video is stretched in the capture window. Since it's DV, it is not really important. Just capture it as - is and then right click on the AVI file captured, select Modify > interpret footage and all the pixels to Conform to D1/DV NTSC format (. 9091). He will perform the 4:3 images, and the aspect ratio is correct. There will be bars from mailbox to mailbox, but those who are already in the images. You can get rid of them, but you'd have to blow up the images and lose resolution, then I'd say just leave as is.

  Once you have done so, just drop it into a sequence of NTSC DV (not widescreen) and change there. From there, you can export some way that you see fit. MPEG-2 DVD is fine as long as the other company is just doing the DVD authoring, but if they do no editing more far, you probably want to just export to tape to maintain the highest quality.