I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.
I reinstalled the air combat Simulator 3 but he can't play. He gets at the beginning and then freezes. I've got shield deluxe antivirus 2009. He has not done this with the 2008 deluxe version of shield. Yet, I can play any other game.
Hi gullo56,
Welcome to Microsoft Answers Community Forums.
To help you better I would ask,
a. If it functioned very well under Windows 7 before?
· I suggest you to disable your firewall security software and check if you are able to play the game.
From the link below, what I discovered is Microsoft Flight Simulator 3 is not completely compatible with Windows 7, but I would suggest that you follow the steps below to help troubleshoot your problem.
1. as Microsoft Combat Flight Simulator 3 is supported by Microsoft Windows Vista to function normally, I suggest you run this program in Vista compatibility mode in Microsoft Windows 7.
For information about how to run a program in an earlier version of Windows, visit the link below,
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
2. you can also try to reduce the hardware acceleration and check if it solves your problem,
1. Click Start-> Control Panel-> appearance and personalization.
2. under customization, click on adjust the screen resolution.
3. in the display settings dialog box, click the Advanced Settings button.
4. in the monitor Properties dialog box, click the Troubleshooting tab.
5. click on the change settings button.
6. in the Security dialog box, click on continue.
7 move the hardware acceleration slider to none to reduce or turn off video hardware acceleration.
8. click on OK.
9. restart Windows.
Hope this information helped you.
Kind regards
Arona - Microsoft technical support engineer
--------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update. Before the update if I had minimized windows they would be reduced when I opened a new window. Need help please, I guess it's just a setting somewhere but I can not understand where is the parameter. Thank you jason
http://about.ask.com/APN/toolbar/docs/default/FAQ/en/FF/index.html#Na4 is Ask FAQ on how to uninstall the toolbar.
-
Downloaded realtk 8139/810 x using a flash drive, but although we see the file and clicked set up it does not work. How can I get internet access again? I seem to not have an ethernet.
Hi Lorraine,.
1. where did you downloaded the drivers from?
2. what exactly happens when you try to run the set-up file? You receive messages or error codes?
You can try to re - download the latest version of the network drivers on the manufacturer's Web site and check.
You can also try to update the latest version of the chipset drivers and check.
Contact your motherboard manufacturer or the manufacturer of the chipset to get good support driver.
-
Hello
I have PC and pay monthly. We are a small company.
Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: "the document is done a new version than my version of InDesign. How should I do to upgrade my version to a version more recent?
Question 2: I already have a license to use the software on two computers. Am I not allowed to use the same version I've taken down on adobe.com til two computers or terms here.
Sincerely
Stefan Svensson
Hello
Please see update requests in your desktop CC application.
CC Adobe license can be activated on 2 machines using the same Adobe ID, but only one at a time.
Reference: licenses and terms of use | Adobe
Kind regards
Sheena
-
Original title: Wireless mobile mouse 6000 will not work on XP but when I bought it iwas sure it worked with Windows 7 and Windows XP.
I bought a mobile wireless mouse from microsoft for more than a year for use on windows 7. When I bought it, I thought that I remembered, it also works with Windows XP, but I can't get the software to complete. I get an error message saying: it has not been verified with the "Windows XP" logo. Is it true, or is there something else wrong.DaveHello
The Wireless mobile mouse 6000 is compatible with Windows XP. I suggest that you download the drivers for the Windows XP operating system from the link provided below and check if the problem persists.Mobile Mouse 6000 wireless
http://www.Microsoft.com/hardware/en-us/p/wireless-mobile-Mouse-6000#support
You can also get in touch with Microsoft hardware support for assistance.
-
the message during the installation of cs 6 trial
-Installer has not initialize.this could be due to lack file.please download adobe support Advisor to detect the problem.
Help, please
Error "Setup could not initialize". Install desktop application | Windows
-
I've updated to fire fox and can not now connected to: https://portal.recampus.com/re/hogue-school/portal/login but I can't in other browsers...
I make sure to check that Internet security software is up-to-date.
Remove Firefox from your program of trust list, and then add it again. For detailed instructions, see Configure the firewall so that Firefox can access the Internet but no luck.
I was ruining Firefox version 36.0 before I updated...
Thanks for any help!https://www.ssllabs.com/ssltest/analyze.html?d=portal.recampus.com & hideResults = we
The site uses TLS 1.0 (an older version of SSL), 37 as obsolete Firefox modes. It is a change of 36 of Firefox.
You can open the topic: config page via the address bar and use the search bar to locate this pref:
Security.TLS.insecure_fallback_hosts
You can double-click the line to edit the prefs and add the domain to this preference.
If there are already websites (domains) in this list, then add a comma and the new domain (without space).
You should see fields separated by a comma in the value column.You can open the topic: config page via the address bar.
You can accept the warning and click on "I'll be careful" to continue.http://kb.mozillazine.org/about:config
-
problem with connecting to the internet
whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server, I looked for a solution for centuries now, and no one can seem to help me! Please someone help me?Hello
First off I'm going to assume that when you say "local internet only", you really mean "local only". Also, I'll assume you are using a router for internet connection broadband. If I am wrong, then you will have to describe the answer how you try to connect to the internet more in detail.
First of all, your router. The indicators show that there is an internet connection? Consult the manual, which probably came on a CD with the router. Internet connection led can resemble a planet with rings or a circle with a lower-case i in the middle of it, or some other symbol. It can also have a caption saying 'internet' or 'connected '. If the router is not connected while your PC will not have access to the internet.
Click the Start button and type "cmd" then press ENTER. In the window type (mainly black) which results in ipconfig and press to enter. Transcribe the results of the command ipconfig for a response.
Your (wired or wireless) network card is set to automatically get an ip address? Otherwise, set it to do that and also to get information from DNS server automatically...
- Right-click on the icon network at the bottom right of your screen, and then click Network and sharing Center
- In network and sharing Center, click on manage the network connections (on the left)
- Right click on 'Connect to the Local network' or 'Wireless Network Connection' depending on how you connect to the router
- Click on select Internet Protocol Version 4 (TCP/IPv4), and then click the properties button
- If things are not set to 'automatic', please note all numbers so that you can restore the settings if necessary
- Make sure that "Obtain an IP address automatically" and 'DNS server automatically get an address' is selected, then click OK
- Click on close
If you are using a wireless connection, what happens if you try to connect to your router with an Ethernet cable?
Please post back with your comments to the above and give more details about your configuration, i.e. router brand and model (or another material of Internet), if you connect wireless or with an Ethernet cable, etc. etc.
Tricky
-
I have 4 GB of RAM, but when my i play any game for example NFS most wanted, my CPU fan runs at high speed and my system gets shut down within minutes. Help me solve this problem
If you overclocked? If so, cancel that. If the games you play are poorly written, it is not that you can do about it. If you have not cleaned the dust and lint from your computer within a certain time, you should do that because it accumulates and causes overheating. For desktop computers, remove the cover and carefully use compressed gas to blow off the dust, especially around the fins in the processor heat sink and air ducts. For a laptop, I'll ring gas compressed through the ventilation openings.
Good luck.
-
Agent Extension SNMP event log has not initialized properly in windows 2008 R2
I enabled the functionality of SNMP Service and found the following error:
"Error 2019: Extension SNMP event log Agent has not initialized properly in windows 2008 R2 Enterprise 64-bit.
I uninstalled all related SNMP Applications and reinstalled the functionality of the SNMP Service, however, I always do face the same error.
According to the following of Article http://support.microsoft.com/kb/128729 , this requires to contact microsoft to obtain the fix.
I have a subscription with Microsoft technical support to download the fix mentioned the article above.
Any help please,.
Hello
The question you posted would be better suited in the community pro Windows 2008.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer -
My IPad 2 Air is mad, he gets on its own, and it freezes. Not to mention it locks me. Didn't this iPad for 2 days. Have not been able to use it! I tried connecting to ITunes and will not work!
Hi Kareyfabela,
For this kind of problem, I strongly recommended opening a pension with Apple iPad case will probably require inspection by an Apple engineer. You can open a file on this site: https://www.apple.com/support/contact/
I hope this helps!
Jonty
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi Jewels38f,
· What happens once you insert the disc (you get no error message)?
· What version of Combat Flight Simulator you try to play?
· What version of Windows is installed on your computer?
· Have you tried the game from the disc itself?
If you use Windows 7, then follow the suggestions below.
Visit the link given below to ensure the compatibility of the version of the game.
Do not start the game that is installed on your computer, instead of this insert the disc and let the AutoPlay option to start the game and will give you the opportunity to play.
Check if this is useful.
If you are trying to play Combat Flight Simulator 3 you may need to install it even in compatibility mode and check if that helps.
To install the game in compatibility mode follow the link below.
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
Before installing the game in compatibility mode uninstall the game. To uninstall the game, follow the link below.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows vista and the air combat Simulator series World War II Europe.
We have home edition of Windows Vista 64-bit, have loaded Microsoft CombatFlight Simulator WWII Euope series while running as "administrator." No problem with loading. Have a Logitech extreme 3d pro. In the development of the game, allows to calibrate the joystick very well, but when you go to missions, nothing works. If you return together to the top, we get message asking if we want to re - calibrate the device and there a lot of symbols not words in the name of the device of the message window. Anyway to get the game to work with the joystick. We also have the Combat Flight simulator 2, Pacific Therater, and the joystick works very well with it. Any suggestions to get the game to work?
Hello Debicin,
Welcome to the Microsoft Answers Forum!
First of all, I suggest to uninstall and reinstall the drivers of joystick from Device Manager and check if it works very well. To do this, please follow the steps below:
Click Start > type devmgmt.msc > right click on the joystick device in the list > click on uninstall > then restart the computer.
You can also check out the link on how to troubleshoot the problems of gamepad on Combat Flight Simulator 3 (battle for Europe) and follow the steps to check if it helps solve the problem below.
http://support.Microsoft.com/kb/811463
I hope this information helps. Please get back to us if you have any other questions on this subject.
Thanks and greetings
Mir - Microsoft Answers Support Engineer
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads -
Help the sims2 double deluxe loading and then freeze it!
Recently I bought sims3 that plays very well, so I decided to get the sims2 double deluxe it will load but then freezes and the screen black, then tell does not. I have Windows vista and the back of the box, it is said that it is running in windows vista. Help, please. I read one of the solutions was to delete your temporary files. I'm not a computer person, so I'm afraid to remove or change anything. I've updated drivers, changed to admin user and it compatible to windows xp pack 2. HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!
Hello
Welcome to Windows Vista community responses.
What are the minimum requirements required by the game.
Windows Vista, XP, Me, 2000, or 98
1.0 GHz or faster processor
256 MB or more RAM (512 MB required for Windows Vista or running with several expansion packs installed)
At least 5.5 GB of free space on the hard disk
DirectX 9 compatible .0c map video with 32 MB or more memory (64 MB for Windows Vista) and one able to t & following chipsets: ATI Radeon 8500 or greater (9600 or greater required for Vista); NVIDIA GeForce 2GTS or more (GeForce 6200 or greater required for Vista)
Card compatible DirectX 9 .0c.
Make sure you have the graphics card that meets the above requirement.
Uninstall and reinstall the updated drivers for your graphics card from the computer manufacturer's website or graphics card manufacturer's Web site.
Uninstall the game and reinstall it back and check if you still face the same problem.
Put your computer in a clean boot the game game and check if you are still having the same problem.
To perform a clean boot on a computer that is running Windows Vista, follow these steps.
1. click on start, type msconfig in the search box and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. in the general tab, click Selective startup.
3. under Selective startup, clear the check box load startup items.
4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
5. click on OK.
6. When you are prompted, click on restart.
7. after starting the computer, reinstall and run the program and see if the problem is resolved.
Search for previous issues. If your issue is resolved, follow the how to determine what is causing the problem section in KB article to narrow down the exact source.
http://support.microsoft.com/kb/331796 .
To restore your computer to a Normal startup mode, follow these steps.
1. click on start in the box start the search.
2. type msconfig and press ENTER.
If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
3. click on the general tab.
4. click on Normal Startup - load all device drivers and services and then click OK.
5. When you are prompted, click on restart to restart the computer
I suggest also that contact the publishers of games for patches and updates on the game.
Please let us know if you need additional assistance.
Kind regards
Anthony
Microsoft technical support
Visit our Microsoft answers feedback Forum and let us know what you think. -
Vista will run microsoft simulation of air combat games?
Hello Mp5234,
Thank you for posting. The answer to your question is Yes. You need to get all available updates and/or patches for games to avoid any potential for conflict. For older versions, you may need to run the installation in compatibility only mode if necessary.
Go and fly high.
I am proud to be a member of the Red Tails myself. Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
What I want to do is to create a work environment where all accounts on the Mac have full access to read and write to any file on this computer. I use a program called Freeway Pro Web site. In order to add a feature not included in my version of the
-
Apple Watch following in my footsteps when he goes to reserve power mode?
My watch does not have load yesterday evening, so going mode of power in a few hours, there will follow my steps to the power reserve mode?
-
the friends hyii UA HUD need help how to make a backup of the files from his deleted with (shift + delete) memory card
-
Windows 7 z820 device drivers problems
Hi all I have a hp z820 that worked redhat for awhile, now, I need to go back to using windows 7 x 64. I managed to gather enough drivers on the HP site to repack the drivers in a windows image 7 get me the basics (video, storage, usb etc) Now I have
-
HP630: upgrade the processor HP630 TPN-F102
Hello! I am trying to upgrade my computer laptop processor and would surely appreciate some info about it. Model of TPN-F102 with Intel Celeron 1.5 Ghz B800. can I install i5 or i7 and what model?