CC of Photoshop or Photoshop CC 2014: which should I use?

Similar Questions

• What is the difference between Firefox and Namoroka 64-bit? I have a 64-bit computer. Which should I use?

  What is the difference between Firefox and Namoroka 64-bit?
  I have a 64-bit computer. Which should I use?

  The officially supported only is Firefox - which is your best choice, unless you want to test the new features...

  http://www.Mozilla.org/en-us/Firefox/new/

• I have CC PS and CC2015 PS installed. Which should I use? I prefer the version of subscriptiion. Just uninstall the other version?

  I have CC PS and CC2015 PS installed. Which should I use? I prefer the version of the subscription. Just uninstall the other version?

  Hello

  Yes, you can uninstall the old version that the 2015 CC has all the features of update.

  Kind regards

  Sheena

• I want to reinstall Windows Vista, but have 2 partitions on the hard drive partition which should I use?

  Which partition should I use to re - install Windows Vista? A partition is much smaller then the other.

  Hello

  you don't say how you are trying to reinstall vista

  If you use a microsoft vista dvd you would normally select a CUSTOM installation that gives you the opportunity to see what partitiions are available, what size are they and what is currently installed on them etc.

  It is then to you to delete the existing partition where vista is already installed and reinstall on the same partition or where you want to

  We cannot see how your hard disk is configured

  We can only give you general information on this subject

  read the tutorial below well especially the steps below:

  Now it's time to choose the installation type. Update or custom are the choice, but as you can see, in this case, Custom is the only option. There are two points to note. The first is under Customs where it says you can use this option to change the disks and partitions. This is true to a point. You can create and delete partitions and resize a partition using the command 'Extend '. The second thing to note is that if you want to 'Upgrade '. you need start the installation from Windows inside.

  Once determined the type of installation, it's time to decide where to install Vista. As you can see on the screenshot options in this scenario are limited. There is a 20 GB hard drive and it is all unallocated space. If your intention is to return the entire disk in Vista with none of the additional partitions for other uses, all you have to do is click on disk 0, and then click the [next] button. The installation will continue.

  etc.

  etc.

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• I can't find some light filters that come with Photoshop cc 2014 and should be in 2015?

  Hi guys,.

  I'm new using photoshop and occasionally use some light filters and LUT in newer versions that come with photoshop, but I forgot where they are in the program.

  I remember one was called something in the sense of style of horror, and a few others changed the colors to resemble old photographs. Similar to what the effects of lumetri are in first. Can someone show me where they are or point me in the right direction?

  Simply create a layer of color research

  

  In the properties box, click on the 3DLUT file and you will see a complete list

  

  hope that helps

  Terri

• What is the difference between POS and VSC? Which should I use?

  Hello

  Turns out we have a multitude of backup running for our virtual machine environment. We lack vCenter 6.0, 6.1 VDP, VSC 6.2P1, SnapManager for SQL and SnapMirror jobs put in place in OnCommand 3.1.2.

  I go crazy trying to pierce the need to have all these products running of backups and snapmirroring data. Bottom line, our SnapMirrors for one or two Volumes take f o r e v e r... And that impacts my tests of SRM (when you use the replication of data).

  I'm trying to clean up, he perfected down, consolidation, re-scheduling and friction on all these solutions. And in the middle of my panic, I thought that "these all do essentially the same thing? Taking snapshots and SnapMirroring data? »

  So, my question to the community is, what is the difference between these solutions, or are they all essentially do the same thing? They confront each other, vying for the band width and stumbling on them to achieve the same thing? Right now my plan is to suspend all work of everything except VSC and SnapManager for SQL and do all this from VSC. This means suspend jobs in NetApp services.

  I'm not the admin for POS, it is my co-worker, so he who installed independently of my work. Is it still necessary?

  What brought me to all of this, besides the failure of MRS to transfer data (SnapMirror on request within a reasonable time) was noting the deltas for our work of snapshot is always huge at certain times of the day. For example, our biggest pork of data has a light snapshot at midnight, and he is constantly 71GB. This leads me to believe that this is a job, because it is predictable. The net effect is SnapMirror jobs take days, latency are several days and transfers has never really stop.

  We plan to upgrade our pipe between our protected Site (HQ) and our DR Site (branch) of 50mbps at 100 Mbps. We have 100 out of our headquarters and 50 in our satellite TV right now, so we want to both be 100. Maybe that would solve the issue, but I still would be pretty effective.

  If you need more information, let me know and I will fill you, or less make up something so I look like I know what I'm talking about.

  TIA!

  Steve

  The reason why you do SnapMirror replication is DR. It is not a backup solution. If you stop all your SnapMirrors in OnCommand Unified Manager and your storage array, the production goes down, you no longer have a DR.

  What does VSC is, it creates snapshots of your NetApp volumes, you can use for short term backup/recovery. The snapshots are not a real backup solution, however. If someone deletes a volume on the NetApp snapshots of this volume will not save you because they no longer exist. But they are still useful in many scenarios, such as Previous Versions of Microsoft CIFS options.

  SnapManager aims to make consistent snapshots of demand for software such as MS SQL in your case. Instant database do not give you this ability, as they do not trigger the VSS suspension. More SnapManager for SQL gives you point in the ability to recover in time for your databases to SQL transaction logs, which provide none of the solutions above. However, as SnapManager creates snapshots, you must make sure that you have dedicated LUN for you SQL VM, otherwise you will be taking snapshots of the same volumes twice.

  And now VDP makes backups of your environment. It supports long-term retention, as snapshots in general are not kept for more than one week or one month. Make sure that the data are stored on a separate volume from where are your virtual machines. Or ideally to a destination that is external to your storage group.

  Hope that clears things up a bit. The result is, what you have is perfectly fine.

• How can I After Effects lanuch asked me to choose a program lanuch it which should I use?

  How to launch After Effects I am asked to choose a program to start that one do I use?

  Melvin tries to download the application directly on the link below:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

  * BE sure to read very important before you download instructions.

• H.246 (MPEG-4) against. AVI? Which should I use? What should I use for audio?

  Hey guys, I'm pretty new to AAE. In fact, I've had the trial for only 8 days now. I just got a capture card so I could record BF3 gameplay on Xbox 360. Sometimes I spent doing missions and whatnot, gameplay recording, so I could put in AAE and change it. Now I hear that the EFA is most compatible with the MPEG-4 files only with. AVI files. I'm not sure about this, but I know that when I RAM Preview with. AVI or MP3 files, audio is always cutting in and out.

  My question is, do I need to record and edit my gameplay with H.246 (MPEG-4), or should I use. AVI files instead? What is important to me is the quality of the video and how it works with AAE (I don't want it to twinkle in the entry/exit)

  But also, what is the best audio file format? As in, best quality and compatibility, also I don't want no audio to cut output when I saw it.

  Thank you!

  Use reviews. H.264 is a compressed format of delivery and not necessarily meant for editing. Ditto for you MP3 - AE are simply waste to deal with them. Use rather WAV. Do some reading here on this forum. These themes were repeated several times.

  Mylenium

• Which should be used instead of a Source of landslide Collection

  Hello
  
  I'm currently trying to generate the sample application TUHRA2 as described in "Oracle JDeveloper 11g Handbook: A Guide to Oracle Fusion Web development»
  At a point (page 759 to be precise), I am asked to drop a Collection drag Source in a table and setting the action property as a 'COPY' and the ModelName as 'empImagesModel '. The problem is that this component has apparently ceased to exist in JDeveloper 11.1.1.2.0 and JDeveloper 11.1.1.3.0.
  What should I use instead? "I had a look at the component called simply""Source" Drag ", but this component is not a property ModelName. Any suggestions?
  
  Kind regards
  
  Andreas

  Hello

  Use af:dragSource and use the attribute "discriminating".

  Frank

• Adobe Photoshop CC 2014 - unable to complete your request because the file is locked...

  I support a user of Photoshop CC 2014, which attempts to open multiple .jpg on his local computer files, but gets an error message: could not complete your request because the file is locked, you don't have the necessary access permissions or another program is using the file. Use the 'Properties' command in Windows Explorer to open the file. However, not all the files are affected, and many display a thumbnail of the image and allow the user to open the file. I checked the properties of the file and everything seems normal, and the user is a local administrator on the computer. Any ideas or suggestions would be greatly appreciated.

  

  Kind regards

  [personal information deleted by the forum Moderator]

  Hi martyw,

  If the problem is only with few files, whether they are corrupted or locked (only permission to read)

  Please try to open the file in any other image editing program and save it as a Jpeg again.

  Then try to open the file duplicate in Photoshop.

  Kind regards

  Assani

• Should which driver I use for Windows XP on Portege R500 by WLan

  Because I couldn't get the wireless Lan driver, Intel, 11.1.0.100 references driver Toshiba download site (I'm redirected to a link that does not work), I went on the site: http://aps2.toshiba-tro.de/wlan/. Information about the two sites, all two of Toshiba, are contradictory:

  A site lists 11.1.0.100 references as driver for Windows XP, the other site of the 11.1.0.100 references as the driver for Vista 64 and the 11.1.1.16 as driver for Windows XP. Which should I use for Windows XP on Portege R500?

  Sorry my friend but after reading your question, I can just laugh. Use simply listed http://aps2.toshiba-tro.de/wlan/?page=downloads driver, install it and enjoy your life.

• Error message in Photoshop CC 2014 trying to open JPEG files

  After installing the updates of Photoshop CC 2014, one a few days ago I am not able to open JPEG files.  Whenever I try to open a JPEG file, I get the following error.  I tried to uninstall the program yesterday and put it back, but still having the same problem.

  

  Here is the version of Photoshop that I use...

  

  Because you have CC 2014 on a Mac, which tells me that your OSX is probably 10.8 or less.

  The updated Camera Raw, 9.5 causes this error due to a conflict with older versions of Mac OS x, and you go back to 9.4

  Setup for 9.4 is in this technote: error: 'File not found' when opening JPEG files

  So just follow the instructions and you should be fine.

  Gene

• Photoshop CC 2015 slow and does not work - I want to go back to Photoshop CC 2014

  I am a customer of the creative cloud. Given that I've updated the Photoshop to CC, 2015, a few weeks ago I worked in the worst conditions: the software its sloww now and does not work and I want to go back to the previous version of Photoshop, the CC 2014 which worked very well in my iMac.

  Please, tell me how to download this version and solve the huge problem. Thank you

  Hello

  Please visit the link below to return to the 2014 version.

  http://blogs.Adobe.com/adobecare/2015/06/16/how-to-find-and-install-previous-version-of-ad obe-apps-in-cc-2015.

  Hope this helps!

• Droplets could not communicate with Photoshop cc 2014?

  Hello

  We went to Abobe CC 2014. We have droplets which work on cc5.5 do not work on CC2014.

  So I recreated new droplets using CC2014, but still we get "Droplets could not communicate with Photoshop" error.

  It works on the run/debug mode (play Actions) only. When we create droplets then we receive above error.

  Can we fix this on CC 2014.

  Hi csreddy79,

  Could you please uninstall and reinstall Photoshop CC 2014 on the computer once and then let me know.

  Kind regards

  Tanuj

• Basic question: I bought Photoshop CC 2014, I'll still be able to use it after a year or should I spend in 2015?

  This is probably a ridiculous question, but I bought Photoshop CC 2014 last year, and my subscription is soon I guess. Does this mean that I will not be able to use photoshop anymore unless I have buy CC 2015?

  No, you must continue to pay the monthly payments. You can get the bundle Photoshop and Lightroom, which is cheaper than just PS. Illustrator would be extra.