CC2015 Photoshop BUG report?

Similar Questions

• bug report: warning dialog always appears on the second monitor.

  This applies to Adobe Illustrator CC 2015 (version 19.2.0). I already presented my bug report to Adobe. Here is what happens...

  Steps to reproduce the bug:

  1. cut the 'Application Framework'. Rearrange the palettes, and then create a new workspace. Quit and restart the Illustrator application.

  2. start a new document and draw something on it. Then close the document without saving it.

  3. a warning dialog expected pop up and say "blah blah blah...". If you do not save, your changes will be lost. »

  Results:

  Here is where is the bug: the pop-up warning will still appear on the second monitor, not on the main screen. This same bug also appears when the embedded image of Photoshop is changed and a popup will ask if you want to update. new pop up appears on the second monitor only rather than on the main screen. I even tried to go back to the main screen, the following warnings are always appear on the second monitor. I even changed my monitors autour by reversing the display ports and the problem persists.

  If anyone has a solution to this, would be great and I thank you ahead of time.

  Here's the dialogue windows always appear on the second monitor.

  
  

  I just upgraded to the latest version of Illustrator CC (2015.3.0 Release;) Version 20.0.0). The dialogue-box-appearing-on-secound-monitor question goes. You need to restart your Mac after installation before it takes effect.

• Request/Bug Report Form broken feature

  Reach

  Adobe - feature request/Bug Report Form

  Select 'Photoshop' or 'Adobe Bridge '.

  The form does not appear.

  To the family of Photoshop products, you must use Photoshop community customer family

  Adobe site does not include this link in many of their pages there should be link you posted I saw him here in time, but in the links at the bottom. Adobe seem to leave Photoshop customer family community often seems to change the links in the section

• What value is just using development builds (Beta, FDE, every night) If you don't submit bug reports?

  Simply surfing with a version beta (or most recent) version of FF actually do anything for MoCo? I really useless novelties that appear obviously earlier in these channels. In any case, I have a crash report that I submitted on 9 July to my topic: profile breaks down. I have all data with the activated options (choice of Options Options/Advanced/data) and have had all of these options enabled for longer that I can remember. IM wondering if this helps them to make a better browser (or at least confirm that the changes are NOT hurt the performance of the browser), or if they get no advantage out of bug reports.

  It will be really useful if you just use pre-release builds with these functions of data communication on without worrying if you provide a manual feedback. This will allow developers to detect performance regressions or issues of stability with some configurations before they will be available to the general public thanks to publish versions. Thank you!

• Why my bug reports have not been sorted for more than four months?

  https://Bugzilla.Mozilla.org/buglist.cgi?bug_status=unconfirmed & bug_status = NEW & bug_status = ASSIGNED & bug_status = REOPENED & emailassigned_to1 = 1 & emailreporter1 = 1 & emailtype1 = exact & email1=a.vanloon%40alexandervanloon.nl & field0-0-0 = bug_status & type0-0-0 = notequals & value0-0-0 = UNCONFIRMED & field0-0-1 = reporter & type0-0-1 = equals & value0-0-1=a.vanloon%40alexandervanloon.nl & list_id = 9847693

  I have tabled five bugs in November and December last year. To my surprise and disappointment, no one has been sorted or answered by the developers of Firefox OS. I don't know that they meet other reports of bugs. Does anyone know why this might be? Are there not enough developers to treat all the bug reports? Or y at - it something wrong with my particular bug reports?

  Thank you very much for your help Andrew and guigs2. Wish that was my time to help with the yard myself.

• Printing of text selected cultures, one part of the first line - bug report 696566 - any input help or workarounds?

  Previous reports of this problem in this forum have had their closed discussions. It is still a bug in FF 17.0.1, and has a 696566 bug report. One suggested solution of definition of impression to 90% scale has no effect.

  Printing bug has now been fixed.

  change Some printing bugs have been fixed including some pdf issues and bug 684622
  

  Hope that your problems will be resolved in Firefox 21.
  Who will now average using night http://nightly.mozilla.org/

• Message 'bug report' v 6.1 while on Pinterest

  While I'm on Pinterest, a message appears: v 6.1 bug report. Has anyone seen this?

  I would recommend contacting Pinterest, as this may have nothing to do with your actual iPad.

  https://help.Pinterest.com/en/contact

• How can I write a bug report?

  I have the message asking me to write a bug report. The message reads:-flight from the world. The following World leaks have been detected (the check is performed when all browser windows are closed) Javascript global objects $. Please write a bug report about it, and steps to reproduce if possible.

  I am running Mac OSX El Capitan version 10.11.3 and Safari version 9.0.3.  What is a bug report and how do I write one?

  You can use your Apple ID to register on this site and go the Apple BugReporter. Allegedly, you will get a response if you submit your comments.

  Comments via Apple Developer

• Apple does not not in the bug report

  I have an open with Apple (number 23682041) bug report (subject of a problem with worms backward compatibility of the isochronous USB asynchronous in El Capitan).

  I posted about 1 month ago. Apple never responded to it somehow.

  There are other people here who have had this experience? Has been the bug picked up by Apple after 1 month?

  They will not contact you unless they need additional information. Any fix will happen simply in a later version of Mac OS X.

• Detailed information on the filing of a bug report?

  It has been suggested that I have file a bug report on the problem with an app that seems to be specific to the Moto E2.

  Before I dive, is there a description of just how a bug report should be structured, or something like that?

  I'd hate to present one that is not useful, or find myself in the middle of a deposit and find he's asking me something I can't lay my hands on, especially since I have to file the bug report using the phone itself.

  Android has a built-in bug report feature. Just follow these steps to use it.

  1 activate the developer options by going to settings / phone connection and press the version number several times until it says "you are now a developer."

  2. go to settings / Developer options and turn on USB debugging. You should see a prompt with more information. on the USB debugging.

  3. Select 'Take bug' at the top of the developer options. The phone will vibrate once when you select 'Report' and it will take a minute or two to complete. The phone vibrates twice as much when it's done and you will see a notification icon.

  4. Select what you want to do with the report in the sharing dialog box that appears.

  Looks like that it stores the output of several commands (for example, top, ps, dmesg) with various command line options in the text file. There is an option to add a bug report shortcut menu press and hold power button, which might be useful if you are testing an application and want to search the log for a specific timestamp.

  I hope this has been helpful!

• Bug report, created of notifications

  Whenever I have unlock my phone, it displays a notification that Bug report was created. It is very annoying. Help, please

  Have you enabled Developer options or enabled usb debugging on your motorcycle g?

• Bug report - activate the quick start causes filesystem corruption and loss of data for Windows 8 NTFS when it is used by Windows 8 and Windows 2008R2SP1

  My hard disk configuration is as follows:

  Disc 1: 0.5 terabytes
  Disc 1 - Partition 1 Windows 2008R2SP1
  Disc 1 - Data Partition 2
  Disc 2: 1 terabytes
  Disc 2 - Partition 1 Windows 8
  Disc 2 - Data Partition 2
  After you install Windows 8 RTM and used for about half a day, I started in Windows 2008R2SP1. From the start in Windows 2008R2SP1, I had "one of your disks needs to be checked for consistency", and it proceeded to chkdsk both the 2008R2SP1 and Windows drives data. No problems were detected
  I don't think a lot of it... and goes to copy several files from disc 1 - 2 Partition on drive 2 data - data Partition 2
  Then, I started Windows 8 RTM one 2 weeks later and told me that 'one of your drives should be checked for consistency", and it proceeded to the chkdsk disk 2 - data partition 2 and found a small number of questions. But after that, all files, I had copied in 2 Disk - Partition 2 data were GONE!
  So I decided to reboot and start Windows 2008R2SP1... and I got the "one of your disks needs to be checked for consistency" again this time what we found thousands of questions! He supposedly fixed, but my files (more than 200Gbytes) still LEFT!
  I believe that it is this same problem: the bug - report serious corruption of system files and loss of data caused other NTFS de Windows 8 CP readers but I think it was not fixed on CP, and it is now on GTR!
   
  One more thing why this site (http://answers.microsoft.com) don't have any option to ask questions about Windows 8 RTM? I had to choose' other/unknown '
   
  Update:
   
  I found another thread in this forum about the corruption of NTFS when dual boot: http://answers.microsoft.com/en-us/windows/forum/windows_cp-performance/can-dual-boot-windows8-x64-and-windows7-x64-cause/d89a58fd-cde5-41f5-b49d-8c84f79f46ac
   
  I also found this: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/1be71590-1f43-4525-a341-26bdbccdb9df
   
  Apparently if you use the option "Turn on the quick start (recommended)" in your Power Options, when you turn off your machine, it's not really turn and that's why he won't let NTFS in a consistent state, and so, if the disc is read by another Windows, it will try to 'fix' cause corruption...
   
  This could mean, even a double start between 2 windows 8 facilities system would auto destroy...

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link for your question.

  Windows Server 2008 IT Pro Networking Forum:

  http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Kind regards.

• HP LaserJet Pro M402dn: Generic AirPrint driver HP LaserJet Pro M402dn - when a dedicated driver will appear - Bug report?

  There is a bug report or request.  If I turn my HP LaserJet Pro M402dn via Airprint, I can't get a generic driver.  This means I can't print envelopes because DL size paper is not available via wildcards.  In MS Word, I see the evelope (DL is supported) where to print but prints biased mode A4.

  Will be a good pilot ever written?  After all, that this is supposed to be an AirPrint printer.  Or will be fixed this problem with 10.12 (Sierra)?

  Maybe someone could tell me how to contact someone who can tell me if my questions cannot be answered here.

  Thank you.

  Bill

  Hello

  This is now fixed.  I can sent this file you ealier discussions:

  HP-printer-essentials-SE - 4_7_0.pkg ( https://support.apple.com/kb/DL907?viewlocale=en_US&locale=en_US ).

  But I never installed it because he had a date of 2015 on this subject.  My fault, I thought he was old.  It's one thing to Apple.

  I ran that Installer and training specific to a printer appeared and now I can print envelopes on airprint.

  I know that this really has nothing to do with you, but maybe this file must be included with the routines of installation of Mac with HP Easy Start?

  Thanks again for your suggestions.

  See you soon,.

  Bill

• BlackBerry Smartphones Bug report: appointments that disappear in the calendar BlackBerry (Android)

  I have a writing a bug report on the BlackBerry (ver. 1.3.1.11404) calendar application for Android, running on a BlackBerry PRIV STV100-2 with Android 5.1.1 Lollipop.

  This bug is reproducible 100%.

  Synopsis: Zero minute appointments disappear to weekly view and the view of the calendar day when the zoom level is decreased enough, if the appointment of zero minutes is followed by a longer appointment.

  Steps to reproduce:
  (1) create a new appointment with the identical to its start time end time (for example, start at 09:00 to 09:00).
  (2) create a second appointment the same day from 30 minutes later, a period of one hour (for example, start at 09:30 to 10:30).
  (3) the day in day view or week view.
  (4) pinch-zoom in and out. The first appointment disappears from view when you zoom in enough. It reappears when you zoom in.

  Note: The use cases for the appointments of zero minutes is to store the reminders.

  Thank you @jonmorrow

  I have reproduced and shared internally

• Bug reports

  Hello.

  Y at - it somewhere we can post bug reports and see if/when that the problems corrected?

  For example why (when an application runs since Momentics) is being polluted by untold as repeated messages output console:

  libpng WARNING: Interlace handling must be enabled when using png_read_image

  which make it very difficult to see what we are really interested.

  If things like these are the problems they should be fixed and not over on the console 1000 times in a row.

  If we create those clean QtMessage as stated in the doc Manager

  http://developer.BlackBerry.com/native/documentation/Cascades/Getting_started/tools/debugging.html

  It's just things worse since many of these messages to get injected apparently of a different thread that causes the output a random mix of lines half mashed up together according to the thread that writes all the time.

  The only hack is to write your own messages on stderr (instead of stdout as stated in the doc).

  Output of debug console (minimum and sufficient) useful is a minimum requirement for effective software development

  Yes Jira.

  The best way to get there is to connect to an account of Jam and then click on the link to report incidents.

  https://developer.BlackBerry.com/bdsc/home.html

  Reports bug Momentics about or tools (i.e. no coding bugs) can be entered to Momentics itself, the report will end up in the same place in Jira, but in the Tools category.