Install TWO Photosmarts on a single network/PC

Similar Questions

• Photosmart B110 on wireless network. Queue Mac returns to 'break '.

  I installed a Photosmart B110 on the network of the company through the printer wireless.  Received the message "Congratulations" OK.  I set up my MacBook Pro OS 10.5.8 to WiFi connection to the IP address of network, which is already used to access the internet and the server files.  I have a queue that is configured with the correct IP address and an image of the printer.  Printing via USB is fine.  When I ask to print wireless queue shows an attempt to print but comes back to "pause".

  It seems that this timeout while communicating router for printer... I hope you can try to keep the printer near the router.

  If incase it's close. Print a printer configuration page. Take the printers IP address.

  go to System Preferences > print & fax.

  Click on + sign below. A window will open. Click the IP tab. There, in the Protocol select "HP jet direct.

  And enter the address as the IP address of the printer. as 192.168.0.11 etc..

  Select the printer driver 'printing' by and add it.

  Try to print. Let me know if it helps... it. When there

• How to install two operating systems on a single computer

  Original title: windows

  How to install two operating systems on a single computer, xp and windows 7... ?

  Hello

  Thank you for contacting Microsoft Community.
  For the installation of two Windows OS (called Dual Boot), you first determine what exactly the BONES. Based on this, you can proceed to install the oldest operating system first, then installing the latest OS. Here, in your case, Windows XP first and then Windows 7.
  If you change the order, the latest version of Windows will not work correctly.
  In addition, you can use Virtual PC or VMware to use Windows XP in Windows 7. Windows XP Mode is another version of Microsoft which allows you to use Windows XP in Windows 7 through Virtual PC. You can download Windows XP Mode from here:
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx
  To install Windows XP Mode, you must have Windows 7 Professional or higher, with hardware virtualization enabled in your PC (you should check in the BIOS of your PC). If you prefer Windows XP Mode, you don't have to install Windows XP in the above mentioned way. It installs like any other program on Windows 7.
  Note that if you have Windows 7 Edition Home Premium or lower edition, you can try Windows XP using Virtual PC/VMware or dual-boot.

• Omen of HP 15: Wifi stop working. Win10 shows only a single network and it connects to the WiFi

  Hi guys,.
  Since a few days my wifi stopped working.
  If I click the Wifi icon it shows only a SINGLE NETWORK (two maximum), but not mine!

  

  And I live in a building of 20 + networks, as you can see on the WiFi Analyzer (I'm the only red to the right)
  
  
  
  If I reactive / disable Wifi with fn + f12, it goes back in plane and Wifi mode mode and sees it eventually all networks:
  
  
  
  My Wifi is on top. If it is registered, Windows connects to it and then she abandons the connection; If it is not registered, and I try to connect, it says "you are not able to connect to this network.
  Is fun is that after a few seconds, each network disappears and alone is shown (probably the one next door... I don't know).
  
  I already tried to RESET the laptop MATERIAL by keeping the power button for 10-15 seconds with the laptop is turned off.
  I tried to follow these instructions (http://support.hp.com/us-en/document/c04649175) updated drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [10 default Windows], 18.32.0 [last drivers]) without success. Whenever I have install a new driver, I uninstalled the earlier software Wireless + restart.
  
  I tried to uncheked "allow this computer to turn off this device to save power" on my settings of Wifi hardware without success.
  
  HP network support said that I did not choose a Wifi (really? The problem is that I do not see my Wifi on the list!).

  This is unrelated to a new 10 Windows upgrade since I installed it months ago and this is the first time I have this problem :/ It has always worked
  
  I tried different settings too:
  I changed the channel, I put 802.11 g on my router, APSD off on the router.
  I put "Magic off packet, QoS ad hoc off, U-APSD off, fat wide channel, differential flow mode HT off" on the creation of the map without success. Nothing chaned.
  
  The hardware test detects any failure.
  
  Important note: If I close the router, it shows my network connection with full power and he connects to it. Then I come back in my room (probably 3/4 meters away), it MAINTAINS the connection for 30 / 40 min and he drops the connection and I cannot reconnect to it more. It has always worked perfectly in my room during these months (I bought it in March 2015), so the distance is not a problem, I'm 6 / 7 m away from the router.
  In this case, it shows my network (connected) and the nearby... and the other 20 networks +?
  
  The only way I have is USB tethering with my Nexus 5.
  
  Linux: I tried the WiFi on Freya elementary (Ubuntu linux OS base) and it displays 20 + networks available on the list. He has not the connection problem with my Wifi, but sometimes it stops working, Web pages stop loading and I have to restart Wifi to reconnect to the it (usually after 30/40 min of use it).
  
  -------------------------------------------------------------------------------------

  What is the problem? My Wifi card is broken? Should I call Italian support or if you have any suggestions?

  WAWood,
  I took a risk.
  I did a factory restore with recovery HP (I have a drive dedicated for her)... and it worked!
  I had to switch from Win8.1 to 10, but the Wifi problem is solved!
  
  I'm still guessing that was the problem...

  Now, I'm under Intel drivers 18.30.0.9 worm and all the networks work.
  
  In the next few days I'm checking the linux problem (reset deleted primary partition).

• Cannot install HP PhotoSmart 3210 on 8.1, 64-bit Windows. You want to start.

  Goal: Printer install HP Photosmart 3210, FUll CV utility (Solution Center, Photo Creations, etc.) on a new DELL system running Windows 8.1, 64-bit.

  Hardware configuration: The HP 3210 is connected by Ethernet to Western Digital My Net N750 router.  Two computers are connected to the same router: a race of all-in-one DELL 8.1 of Windows with all updates installed (this is the system I am trying to install the HP software on) and an Apple iMac, I need only basic printing capability.  Both computers are temporarily connected via WiFi; This will be changed to Ethernet at a later date.  The router using DHCP to assign IP addresses to devices, including printer.  I can ping the printer from two computers.  I can set up the HP embedded web server on both computers.  The iMac can print and scan from the printer.

  Short story: I tried several times to install the printer drivers and the HP utility software on Windows 8.1 System.  At one point, I installed the drivers, but not able to install the utilities.  When I finally got the utilities installed, they did not see the printer.  At the present time, even the notebook can not see the printer.  The mistakes that I've seen are:
  -"The system cannot find the file specified."  (the name of the file contained the string ice_suffix.  "I believe that this failure was due to the presence of McAfee Security software, using msconfig more later disabled.)
  -BSOD BAD_POOL_ERROR
  -No network detected (from HP Install Wizard) device
  "This app prevents you to restart" (the title of the app was "HP all-in-one series")
  I tried the wizard install the HP add a tool of the device, the print and Scan doctor and several other things.  I did a level 4 uninstall as described below, which has encountered an error in an early phase, but continued after I clicked "OK".  I installed the latest version of Flash.  The System File Checker has been run when the system was first installed on May 29 and found no problem.  I temporarily wired the printer directly on the Windows system via USB (and then put it back on the router).  I have reset the printer by removing the power for a minute, etc, etc.

  At this point, I would like to clean the system as much as possible and try again from scratch, using the installation wizard.  Based on my experience so far and a careful reading of the many positions installation - problems on this forum, I created a checklist of proposed to achieve this.

  My request on the forum: Please see the checklist.  I won't go forward until it has been approved as being complete and accurate.  Missing something?  Nothing is unnecessary?  The order should be changed?

  NOTE: Step 6 assume that you have already tried to install the software and therefore to have a copy of the uninstaller on the system utilities.  In my case it is true.

  1 connect the printer to the router via Ethernet.  (This is my current setup).
  2 turn on the printer.  Unplug the power cable from the back of the printer.  Wait at least one minute.  Reconnect the power cable.  Wait for the printer to initialize.
  3. do a "clean boot": (now RMB) do a right-click on the icon of window in the lower left of the screen.  Select 'run '.  Enter "msconfig".  Click on 'OK '.  In the Services tab, check "hide all Microsoft Services".  Click on "disable all".  In the Startup tab, click on "Open Task Manager".  On the start of the Task Manager tab, click the top entry and then click "disable".  Repeat for each entry in the list.  Verify that the status column now contains "Disabled" for each entry.  Click on the 'X' at the top right of the window to close the Task Manager.  In the System Configuration window, click 'OK '.
  4. RESTART the system to perform a start without the Services and start disabled.
  5. connect to an administrator ID.  This must be the ID used previously to try to install the software.
  6 do an uninstall of level 4: RMB on the icon of the window in the lower left corner of the screen.  Select 'run '.  Enter '%Temp% '.  Click on 'OK '.  In the resulting display folder (supposed to be in C:/Users / 'ID' / AppData/Local/Temp, where 'ID' is your user ID) enter "Uninstall_L4" in the search box at top right of the screen.  This should find 'Uninstall_L4.bat' (supposed to be in C:/Users / 'ID' / AppData/Local/Temp/7zS0 * / util/ccc).  Click (or double-click if your system is configured to require that).  [NOTE: several forum posts say to use L4uninstall.exe, but this file is not anywhere in the Temp folder on my system.]
  7 meet the need of all the prompts that appear.  A final prompt will tell you that a restart is required.  If two windows appear at the same time, both with "Restart" buttons on them, click the button in the larger window.  [Note from experience: when I click on restart in the small window, WIndows complained that he could not start because the larger window was always active.]
  8. once the system restarted, RMB-the icon of the window > run--> msiexec /unreg-> OK, then run RMB window icon->-> msiexec/regserver-> OK.
  9. check that the uninstall and complete if necessary:
  Look in C:/Program Files (x 86) for HP records; If found, delete them.
  Look in C:/Program Data HP records; If found, delete them.
  RMB-> the icon of the window run-> % Temp %-> OK.  Delete all files in the folder that results.  [NOTE that it prevents to run uninstall again until installation has been completed, since it is where are the uninstall files.]
  RMB-> Panel window icon-> devices and printers.  If the HP 3200 Series is broadcast, RMB-> remove the instrument.
  RMB icon window-> Control Panel-> system-> device-> tab Manager display-> show hidden devices.  Expand "Printing queues" (click the triangle).  When a HP 3200 queue exists, RMB on it and click on uninstall.  Expand "Printers" and do the same thing.
  RMB-> run-> regedit window icon-> OK. Scroll to the top of the list.  Click on 'Computer' to establish a starting point.  Edit-> Find... check the box "Keys", uncheck the 'Values', 'Data' and "Match whole string only" boxes.  In the "Search" box enter "HP." (including interval)-> then find.  [NOPE, that is not all HP keys and found a few that seem not to be HP (for example SOAHP. (DLL). a search for "HP" finds lots of unrelated keys.  Is a good way to clean the registry if level 4 uninstall it did not?]  Use F3 to search for subsequent entries.  For those who are clearly HP related [How can I be sure?], RMB on the key, and select 'delete '.  [Yes, it's dangerous and without greater clarity I won't actually, but I don't like leaving orphans key autour.]
  10. run Disk Cleanup.  Click the window to access a screen start or Apps.  Type "Disk Cleanup".  Click on "free disk space by deleting unnecessary files.  Check the desired boxes.  Click OK.  Wait for the course to complete.
  11 RESTART the system.
  12 install the HP software.  Pointing a browser on http://ftp.hp.com/pub/softlib/software12/COL50403/mp-122330-1/hppiw.exe to download the wizard, then run the downloaded file.  On the first prompt screen, click "install".  When you are prompted, select custom installation.  "Uncheck the box 'Unique consumables HP', 'scheme Customer Participation', and ' bing for HP bar '.  When you are prompted for the update preference, select "Ask before updating" [my wife, nonnegotiable preference] remove useful tips and suggestions.  Click on 'Next' as required.  When you are prompted, select the Ethernet connection.  The printer must be discovered.  [On one attempt, at this point, that I received the message "the requested service is not found".  Of course, there is that HP Services listed in msconfig, but in order to get that much, I had turned off them ("clean boot").  This seems to be a catch-22 situation, unless these services should have automatically started earlier in the installation process.]
  13 RESTART.  This is necessary at the end of the installation process.  ["Clean boot" conditions hold back at this point?  If so, I'll have to restore the Services and Startup items later and antother restart.  [When is is safe to do so, that is how do you know that the installation of HP is really over?]

  Again, the purpose of this post is to validate the above list.  Your informed comments will be appreciated.

  Hello

  Please try to uninstall the software by following the Uninstall_L4 utility (as stated in your previous post)

  Then, follow the steps below and reinstall the HP software again:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Several subnets on a single NETWORK adapter

  I have two subnets, I want to be able to use with my virtual machines on a server with 5.5 ESXi.  I have only a single NETWORK adapter that is available on the host.

  The VMkernel default Port, vmk0 is assigned the IP 10.208.82.34/29.  The default gateway is 10.208.82.33.  Can I add virtual network adapters to virtual machines and the ping without problem to a host outside the subnet 10.208.82.32/29.

  I created a second Port VMkernel, vmk1 and assigned the IP 10.108.65.38.  Then, I set up a second virtual NETWORK adapter inside a virtual machine with an IP address of 10.108.65.33.  I can't ping this new IP address, 10.108.65.33, to another host.   However, I can ping 10.108.65.38 without any problem.  If adding a second card virtual NETWORK to a different virtual machine and assign it 10.108.65.34, I thing ping 10.108.65.33 without any problem.  I cannot ping this address, 10.108.65.34, another host either.

  I know that the issue is not routing as doing a traceroute from a host shows the correct path is taken.  determination of route of 10.108.65.38 complete normally.  I don't have access to the network infrastructure, because it is a server in a data center.

  The VMkernel, vmk1, using the 10.108.65.38, is accessible from the default gateway and the other hosts in the data center.  However when I attribute 10.108.65.33 to a virtual machine, I can't reach that what anyone outside the 10.108.65.32/29 network, which is my problem right now.  If I assign an address in the subnet of 10.108.65.32/29 as the single IP address to a virtual computer, it still does not work is not a problem of routing within the virtual machine.

  I feel as if I had something simple here as it seems to work almost disappeared.

  
  

  Here is the configuration of the network:

  

  This is the routing table:

  ~ # esxcfg - road - l

  VMkernel itineraries:

  Interface of network gateway subnet mask

  10.108.65.32 255.255.255.248 subnet local vmk1

  10.208.82.32 255.255.255.248 subnet local vmk0

  by default 0.0.0.0 10.208.82.33 vmk0

  I ended up having the point of provider the subnet 10.108.65.32/29 to their router or switch to 10.208.82.38, I have basic and then install a Linux router with iptables to route traffic to myself.

• Pavilion 110-414: best way to install a photosmart 5180 on new 8.1

  What is the best way to install a Photosmart 5180 on a 8.1 new pc? I have the disc, but I don't think it'll work. Can I download the software and connect via USB cable or wireless. The pc is wireless and I tried to find the printer on the network, but not luck.

  suggestions?

  jdr1984 wrote:... The pc is wireless and I tried to find the printer on the network, but not luck.

  Hello

  There ONLY the USB connection:

  http://support.HP.com/us-en/document/c00701803

  This is why you must use the USB cable.

  Please download the following software and driver, save it on your computer (remember where) and run the downloaded file. Do not connect the USB cable until he asks.

  http://ftp.HP.com/pub/softlib/software12/COL30777/MP-110020-2/AIO_CDA_Net_Full_Win_WW_140_408-4.exe

  Kind regards.

• Plan creative photography of cloud, on how many computers I need to install? Or on a single computer?

  Plan creative photography of cloud, on how many computers I need to install? Or on a single computer?

  Your subscription allows the installation on machines as much as you want.  These machines you can only be connected on two of them.  Of these only two machines can use the subscription at the same time.

• Help to connect two virtual machines to internal network

  Hi all

  I have 9 of VMware Workstation, and I installed two identical WinXP VMs. I put them both on the same custom netowrk (VMnet3) setting. In the virtual network on my Win7 host editor I updated VMnet3 'Host-only (connect VMs internally in a private network)', and I have left empty the box "Connect an adapter to the virtual host to this network".

  What I'm trying to do is to connect the two virtual WinXP only between them, a small connection internal, so that a VM could ping on the other virtual computer, but cannot connect to my Win7 (real internet) host.

  Now both show WinXP that they are connected (the icon of the internet with two small screens is there), and they both have an IP assigned. However, does not ping one of them to another IP address.

  Any ideas?

  Thank you!

  Jonathan

  Firewall is turn on the Windows XP machine?

• can I save two devices on a single iCloud?

  can I save two devices on a single iCloud?

  Yes, if they use the same account Apple ID (iCloud).

  http://www.Apple.com/icloud/Setup/

• can I have two apple on a single device ID

  can I have two apple on a single device ID

  Hi, no you can use only a single iD associated with a single device.

• Can I install two graphics on MAC Pro 2008

  I can install two graphics on MAC Pro 2008 cards, and if possible it can cause problems?

  Yes. Just not the slot 1 (double-width slot) and slot 2 are 16 x and Gen 2. Slots 3 and 4 are 4 x Gen 1.1 so not good for graphics cards.

  Note also that even the graphics cards require one or even 2 power connectors to THE but the mac has only 2 available

• Satellite L40 - 14N won't start, if I install two 2 GB memory modules

  Computer won't start, if I install two modules of 2 gigabytes RAM, I can install vista 64 on this computer to overcome this problem, have updated bios.or is there anything else I can do.it also won't work if I put a 2 and a 1 GB of ram in.

  Any help would be apprecated

  mayala

  No, Vista 64 bit will not solve your problem. The fact is that this model of laptop only supports a maximum of 2 GB of Ram in total. For example, you can use one of your 2GB memory module.

  If you do so, laptop will start again.

• Can I install two drives mSata in a w520?

  Using the two grommets pcix in w520 - can I install two drives mSata and have same raid them? Thank you

  You can not. The W520 doesn't have that one slot mSATA full size.

• How to install two operating systems?

  win xp install

  All microsoft can do is talk talk talk you don't give any info how do you just say now with windows xp you can install two os on your computer. Worthless!  How are you stupid?

  Please see:

  Create a system for Windows 7 multiboot

  How to Dual Boot Windows 7 with XP or Vista