CD drive not seen WMP when I try to burn a CD

Similar Questions

• Blank DVDs does not get recognized when you try to burn DVDs.

  Original title: CD/DVD/player burner needs help

  My laptop cd/dvd drive / burner, he is no acknolwedge a blank dvd, but it will be a blank cd, it will also play both, im trying to burn a dvd, but it is not acknowling that one is in the burner, it was working fine yesterday... Please help

  Hi PatriciaKnight,

  ·         You get the error message?

  ·         What application are you using to burn on DVD?

  ·         Remember to make changes to the computer, after which the issue started?

  I suggest you try the following Microsoft Fixit and/or the steps from the following links in the article and see if it helps:

  Your CD or DVD drive cannot read or write media

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  I hope this helps.

• disc burner or software not found message when you try to burn a cd on my macbook pro osx

  I'm used to be able to burn CDs. not so much anymore.  I don't give no disk this burner or software offered. even after the update to itunes.

  I'm used to be able to burn CDs. not so much anymore.

  That means even some Yes? If so, when?  If you mean any please tell.

  even after the update to itunes.

  When what you did to update iTunes? You have restarted the computer since that?

• I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

  Original title: I can not burn CD

  I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

  Hello

  1. have you tried using different CD and check?
  2. were you able to burn CDs without any problem earlier?
  3. have you made changes on the computer before this problem?

  The hotfix in the following article might help you.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• Msvcr70.dll is not found error when I try to update my monitor driver

  Msvcr70.dll is not found error when I try to update my monitor driver, how to fix? Windows OS Vista.  I get an error the driver update for my HP w2207 monitor and when I try to update the driver this is the error I get.  I ran sfc/scannow, but has not corrected the problem.

  Msvcr70.dll not found error resolution
  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR70-DLL-not-found-missing-error.htm

  Point 6 and 7 could solve your problem or one of them. Follow the links on specific points about how to?

• When I try to burn a music disc player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source

  I have computer aGateway running Vista Home Edition and something happened with WIndows Media Player.   I have the DVD/RW internal drive and external DVD/RW as a player.  I use them mainly to copy music files and it has always worked fine until yesterday.

  When I try to burn a music disc, the player is registered as a DATA reader and does not allow me to copy music files that I can play on an external source (such as the CD or car drive).  Worked fine Saturday and had burned discs Saturday night recognizes the two drives as data drives.

  Is it something that needs to be reset or changed?

  In WMP, please click the button burn up and make sure that the Audio CD is selected. Then try burning the CD again, they now play on a standalone CD player too.

• DVD drive not seen by Windows 8

  I have a Dell Inspiron with Windows 7 537 originally. The installed and functional DVD drive is a TSST DVD +-RW TS-H653G ATA drive.

  I have recently installed WIndows 8 in dual boot. When I boot with Windows 8, the DVD drive is not seen. When I go to the Device Manager and I look at the properties of the DVD player, I have the following message appears in the device status area (here I give a translation of the message in french)

  This device is not actually connected to the computer (Code = 45).

  To correct this problem, reconnect the device to the computer.

  The fact is that the DVD still works fine when starting with Windows 7.

  Do I need a new driver or a new device or what else?

  Marcel Painchaud

  (mpainchaud67)

  
  

  Hi Marcel Painchaud,.

  I appreciate the time and effort you took to resolve the problem. Please do the following:

  1. run the command as administrator prompt. Type cmd in Windows 8 modern user interface and press HUMINT + shift + enter

  2 type following and say enter

  Reg.exe add "HKLM\System\CurrentControlSet\Services\atapi\Controller0" / f/v EnumDevice1 /t REG_DWORD /d 0x00000001

  3. reboot the system

  Once the system is restarted check if the DVD player works fine.

  Thanks and greetings
  Sandeep P
  #iworkfordell

• My 5s, IMessage iPhone does not work and when I try to activate it by electronic mail, the box opens, but I hit the sign in button and his stays there as it's frozen! Someone help me please find a solution

  My 5s, IMessage iPhone does not work and when I try to activate it by electronic mail, the box opens, but I hit the sign in button and his stays there as it's frozen! Help

  A deal with this * day. Only thing that worked was plugging it into the computer, it supported up to the computer. Do you have a reset, and when that went to spend he asked me to do an update "carrier". If you're on verizon? My co worker and I have the two are facing it today

• 6 iPhone with iOS 9.2 does not and freezing when I try to turn on + WiFi freezes

  6 iPhone with iOS 9.2 does not and freezing when I try to turn on + WiFi freezes cannot allow him. (When I get to start the Iphone by pluging it to Itunes)

  I've done a new install and reset the network settings.

  But always the same questions

  Thanks a lot for your help

  I have the same questions and more from Friday December 11 when I've upgraded to iOS 9.2.

  Device: iPhone 5 s

  Problems:

  -Screen freezes randomly reboot * required (sometimes restart by the camera itself)

  -Sometimes device reacts very slowly on the command (or even then restarts)

  -For the most part within the first hour when used, sometimes immediately (after restart)

  -Cannot slide or apps to react when I touch

  -AssitiveTouch on, keep available however to move and opening, but no order accepted when the screen is in gel

  Resolution of problems so far:

  -Reset all settings (no result)

  -Backup on iTunes (11 dec)

  -Erase content and settings and restore the backup to iCloud (10 Dec *) (no result)

  -Erase content and settings and restore the backup of iTunes (11 dec) (no result)

  -Tried with the new iPhone camera 6 and restore backup icloud (unsuccessfully; restore hangs at "1 minute remaining")

  -Tried with the new iPhone camera 6 and restore backup of iTunes (no result: same freezing questions reappear)

  Conclusion date: is not a hardware problem (device), but one software: combination of the configuration (such as backup) and the new iOS 9.2.

  By the way: I guess that not possible to restore 9.1 on the device.

  The new iPhone 6 initially contained iOS 9.1, but then did not 'see' backups, because they were made from a 9.2 iOS device.

  So I had to first install the iPhone 6 as a new iPhone, upgrade to iOS 9.2 and then I was able to reset and restore the backup (with no good result, as described above).

  *) restarts: hold Home-button on/off-button simultaneously for 10 seconds

  backup *) in the form of clouds 10 Dec worked without problem on iOS 9.1.

  I will continue to investigate on removing the apps installed a year or two, see if that generates the result.

• HP 7612: I have a 7612 Officejet from HP that worked wireless but now does not work. When I try to

  I have a 7612 Officejet from HP that worked wireless but now does not work.  When I try to open the Network Setup Wizard a message indicating "wireless communication has been disabled. Can someone please?

  Thank you!

  hhmenar

  Hey @hlhmenar,

  Welcome to the Forums of HP Support!

  I understand that you are experiencing some problems with the wireless settings is disabled on your Officejet Wide Format e-all-in-one printer. I can help you with that.

  I'll send you some instructions describing how to do a factory reset on your printer. If you check your Inbox of forum you should see happens shortly.

  Please let me know the results after following the above. If you can run the wireless setup, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• I get the message "Could not authenticate you" when I try to get the portfolio management

  Original title: portfolio in MSN Money management.

  I get the message "Could not authenticate you" when I try to get the portfolio management and when I try again, the same message is repeated.  What type of authentication is necessary?

  Hello

  I recommend you contact the support team of MSN Money for assistance on this issue.

  http://social.Microsoft.com/forums/en-HK/money/threads

  See also Solution Center-silver

• I started receiving messages that Windows Installer service is not properly installed when I try to install a program.

  installation of Windows in windows xp service

  I started receiving messages that Windows Installer service is not properly installed when I try to install a program.
  Running XP Home edition.
  I tried to install Windows Installation Service 4.5 but that doesn't seem to make a difference
  I also tried unsubscribing/re-enrollment msiexec.exe and that doesn't seem to make a difference.

  I tried to reinstall my HP scanjet 4890 software but complains the installation Windows installation service.

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  How to solve problems when you install or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651#reso3

• I used to be able to do with discs DVD-R data discs, now iv changed my hard drive and my computer only recognizes CD - R when I try to burn data?

  "Please insert the disk" error message when I try to burn data to DVD-R disc but works fine when burning data on CD - R.  Also, he can't read and data DVD - R disks, I made from the same computer in the past with the old hard drive, is my new hard drive, missing some sort of driver or something?  Windows XP computer bought from Dell about 4-5 years (Dell 5150).  He let me play commercial CD, burn CDs and burn data on CD - r.  He no longer do anything with a DVD-R disc, wont even recognize one, please help

  Hi malikchebli,

  See the below Microsoft article and try the steps mentioned, check if it helps.

  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD

  http://support.Microsoft.com/kb/321641

• Windows Media Player 11 says disc not empty when you try to burn

  When you try to burn on my home computer with Vista and also computer work with XP, two media players say that the disc is not empty when you try to burn and put back a white disc.  Sometimes, it will finally work after multiple attempts; sometimes not!

  Hi doodle75,

  You try to add data to a multisession CD - R or CD - RW in Windows Media Player 11?

  If you attempt this task, this problem occurs because Windows Media Player 11 does not support multisession recording. You receive this message if the CD you are trying to record already contains data.

  To resolve this problem, save the data to a new CD - R or CD - RW.

  Reference:

  You are prompted to insert a blank disc when you try to add data to a multisession CD - R or CD - RW in Windows Media Player 11

  http://support.Microsoft.com/kb/930370

  Error message when you try to burn data to a DVD-RAM disc in Windows Media Center in Windows Vista or in Windows Media Player 11: "insert media".

  http://support.Microsoft.com/kb/927814

  Please see the link below for more information

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Defender does not work. When I try to turn it on, I get the message "not responding".

  Original title: Windows Defender

  I have Windows Vista and my Windows Defender will activate/doesn't not work.  When I try to turn it on, it responds by saying: 'it is not responding' and stops automatically.  I tried to re - install & who did not work.  Any ideas.

  Hi lskdjfoie,
   
  What have you tried to reinstall? Windows Defender or other programs?
   
  I suggest the following steps and check.
   
  Step 1:
   
  Usually if you have a third-party security software installed, Windows Defender would not work. I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  If this does not help, I would say you scan SFC on your computer and check if Windows Defender works fine.
   
  Step 3:
   
  If none of the steps helps create a new user account and check if the problem persists.
   
  Let us know
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]