CD drive not working do not code 41

Similar Questions

• CD/DVD drive does not work. Error code: 39

  Original title: CD/DVD, HELP! Help! Help!  PLEASE, I BEG YOU!

  My CD/DVD drive is not reading any CD that is placed in it.  It allows you to work just fine now nothing at all, it's not same playiing or read the installation CD "s provided with the system and they are all scans CD that came with the computer when I bought it."  I am even unable to reinstall the drivers or anything else that I've seen a code # 39, I have no idea what it means.  I have never added any hardware, I installed my old program of words on this computer which is my original windows xp, but when I installed it it never gave me any problems.

  I NEED HELP, HELP AND HELPS TO SOLVE THIS PROBLEM, IT'S THE SECOND TIME I CAME TO YOUR SITE, AND I HAVE NOT RECEIVED ANY ASSISTANCE, I'M TRYING A SECOND TIME!  Help! Help! Help! PLEASE!

  Hello

  What happens when you try to reinstall the drivers? You receive an error message?

  Step 1: Run the fix it tool in the following article and check.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Step 2: Perform the System Restore to the date where the CD/DVD drive was working fine.

• NOR tkds5000 LabWindows/CVI IVI driver not work for TDS5104, TDS5054B

  I'm trying to get the driver NI LabWindows/CVI IVI (tkds5000 version 1,212) working for the Tektronix TDS5054B scope.  When I execute the following functions, I have the warning 'Is not a valid value for the parameter or property' of 0xBFFA0010:

  IviScope_InitiateAcquisition

  IviScope_GetAttributeViInt32 for IVISCOPE_ATTR_TRIGGER_SCOPE and IVISCOPE_ATTR_ACQ_TYPE

  IviScope_ActualRecordLength

  This is not an exhaustive list of the functions that do not work, but just that I currently see.  There are several functions that work (see this joint SPY OR file).

  The strange thing is that everything works fine when I have an oscilloscope Tektronix TDS5104 connected (file SPY OR see attachment).  The code also works when I have an oscilloscope connected and selected through MAX TDS3054 driver tkds30xx IVI of NOR.

  Is it possible that the driver of version 1,212 tkds5000 does not support fully the TDS5054B?  I looked through the files tkds5000.c and tkds5000.h, but has not seen any dependencies on the model of the oscilloscope for these functions.  Any ideas?

  Thank you!

  Dave

  So, then I thought about it.  The tkds5000 driver AND works very well.  The problem is that the Tektronix TDS5054B scope do not "initialize" some of the attributes.  For example, I had a problem reading the value of the attribute of slope of relaxation because an invalid value was returned.  If I set the slope of the trigger, first of all, then read it, it works fine.

  Its strange because most of the attributes is set to the correct value corresponding to what is displayed on the oscilloscope screen and the Panel, but not ALL of them.  In addition, other Tektronix oscilloscopes did not require a writing before reading.

  Anyway, thanks a lot NathanT.  I appreciate your help.  You saved me a bunch of time to have to go back and add in a dedicated driver.

  -Dave

• does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Original title: Pny flash drive problems

  I used my flash drives on my pc with xp as os without problem. I then took the same flash drive for my laptop with the windows operating system 7, I opened the files. Then I went to the computer with xp, and the pc does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?

  Hello

  Do you see these error codes in Device Manager?

  Plug the flash drive and run the Fixit of the article below and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  See also the section below, which might be useful in solving the problems of USB devices.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

• Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

  I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

  When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

  I have laptop Lenovo, which has something like that for bluetooth

  Broadcom Bluetooth 4.0 USB

  Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

  In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

  But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

  Please help me. Please give me link if there is no download needed

  Original title: bluetooth

  Hi Roger,

  You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

  Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

  Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

  Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

  Please come back if you face problems related to Windows and we will be happy to help you.

• Can not get my portable floppy drive to work on my computer

  Original title: I have a portable floppy drive that works on all computers but mine! It indicates that the device is installed and ready to use, but when I put in a disc, nothing happens. What can I do?

  It was in the shop and they said it worked fine in my computer to the shop. But at home, nothing. I tried on my old Mac and it works, too, but not on my PC.

  Hi Barrydraw1,

  ·         What operating system is installed on your computer?

  ·         What is the brand and model of the computer?

  ·         The floppy drive is not detected by the computer?

  ·         Have you tried to insert a different floppy disk and check?

  If the drift of floppy is not getting recognized by the computer, and then run the Fixit and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  If your computer does not support floppy drive so it will not work.

  I hope this helps.

• How can I get my flash drive to work? When I install, Windows does not recognize it. In addition, I can't run windows updates and my Install.exe is not responding

  Since I installed Norton I had problems with my computer. I uninstalled it to see if anything works. No luck.

  Since I installed Norton I had problems with my computer. I uninstalled it to see if anything works. No luck.

  Try this. First of all, download and run the utility to remove Norton from the link below.

  Norton removal tool. (click on your version of norton to download the tool).

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?docid=20080710133834EN&product=home&PVID=f-home&version=1&LG=en&CT=us

  Then reinsert your USB key after a few reboots to see if it is recognized. If this is not the case, refer to the procedure described in the link below.

  USB drive not recognized xp.

  http://support.Microsoft.com/kb/925196

  Also, click on Start, run, type ""services.msc ' in the Run dialog box. " Click on 'ok '. Scroll down to "Background Intelligent service". "" Right-click on the service and select Properties. The service is in the started state? If this is not the case, click the button to start the service and the value manual starttype.

  Regarding Windows Update problem, first check your level of service pack for xp by clicking Start, run and type of dialog box running 'winver '. If your service pack is sp3, skip this step and try to reset the windows update components. Refer to the link below to get the procedure.

  http://support.Microsoft.com/kb/971058

  If you don't have XP SP3 installed, you can download and install from the link provided below.

  Windows XP SP3

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  If have any questions, post here on this thread. Good luck.

• My CD/DVD drive stopped working... it is not recognized on my computer... I can't open the compartment either by ejection or manually

  I have a laptop HP... I rarely use the DVD player... someone suggested the BIOS to default and disable the VRAM... Who has sense and how I would do? I tried Microsoft Fixit, but it does not work... I uninstalled the PCI controller. er in the management of devices and Rebooted, without success. It's as if my drive just disappeared.

  Thanks for any help in advance

  Hello

  To manually open the drive:

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  =========================================================

  For the reader does not:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  my computer does not recognize the Device Manager cd/dvd/rom drive says corrupted or missing code 39

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• USB Flash drive not working no-V112b

  Unable to content on a USB flash drive, not getting not formatted. It is within the warranty period. How the guarantee?

  Only if the drive was still usable and allowing for the write you to read the summary file but not. A read-only error.

  You declare that you cannot access the drive at all, is - this correct? If so, I would get the replaced disk.

  If you can read the content, not only to write and run this tool to fix this error.

  Reach
  http://www.PNY.com.tw/index.php?CLS=2&mode=download
  Download USB Driver Flash Format Tool (Ufix-II).
  You will need to have installed to extract the .rar of 7 - Zip. It is downloadable for free. http://www.7-zip.org/download.html
  You will extract the downloaded file "RecoverTool_V2.00.42_M1223 8CE.exe" and run.

  IF this is not what is wrong, then the drive is bad. Trying to force the reader to format isn't going to work. Replace it.

  It will be useful.

• First Adobe Pro CC does not work after update code 0xc000001d

  First Adobe Pro CC does not work after update code 0xc000001d

  W7 OS 2

  Hi Gernots,

  For a fix, update for first Pro CC 2015 (9.2).

  Thank you

  Kevin

• Hi all. How can I manage the preferences that LR do not take up space on my MAC hard drive and works only on the external hard drive?

  Hi all. I am new and on a free trial right now.

  How can I manage the preferences that LR do not take up space on my MAC hard drive and works only on the external hard drive?

  Monthly payment included cloud storage?

  Peut I manage backups? And how?

  
  

  -Amir
  

  Hi amireos,

  Yes, you can create your workflow where you can keep all your images on the external hard drive and the Lightroom catalog file as well.

  If you start with Lightroom and then use the Destination location as external hard drive when you import your image of the external source such as a camera or SD.

  If you already have your Images on the Mac HD drive, then play all your Image on the external hard drive first and then import images directly from there.

  Finally, you can change the location of the Lightroom Catalog as well.

  Default location: folder on the Mac Drive HD, there is folder called Lightroom that you can move on the external drive too (however catalog Lightroom can't memory space as its only import previews of the images is not the real image and full)

  Once you move the file catalog Lightroom external hard disk, then you need to browse the catalog file when you launch Lightroom only once.

  See thread: LR catalog moving on external hard drive

  Let us know if it helps.

  Kind regards

  ~ Mohit

• How deactiveat elements 9 when he stopped not working, no error code.

  My 9 items stopped not working, no error code.  I am trying to disable and uninstall, however, it seems to turn off I have to be able to get the program to open.

  Thank you Jeff Wright, the third time that I chatted they disabled the program for me and I was able to uninstall and reinstall the program works now.  I had two applications on my lap top and the other on my computer when they disabled it.

  W

• I have a problem with the DVD drive not detected on Windows 7.

  I built a new PC (I've built a few of them).  This time is not considered my ASUS BD player with Windows 7 DVD burner.  It is not in either Device Manager just do not at all recognized.  The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem.  Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted.  Please help me solve this problem :-)

  Original title: optical drive not recognized...

  Hello

  Please contact the Microsoft Community.

  You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error message or error code?

  (2) did you have performed the steps in troubleshooting?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I would have you look at the article-

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116#top

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• FireWire drive not found, at all.

  I have a G-Tech 500 G external firewire drive, which worked until 30 minutes ago. Now, it does not appear at startup and it does not appear in the list of drives on the left hand side when I run disk utility. The player would always noises at the start and also, when it was in use. Now, there is silence, even when I turn it on. The light on the front, but it's all I see happening.

  I have reset the smc and Landau, without result.

  Sounds like the failure of the drive or the enclosure has failed.

  You can always try another cable to exclude.

  You may be able to pull the drive and try a different enclosure