Cd/dvd USB for DOS drive carrier

Similar Questions

• After you have saved the system at an earlier date, program asks a CD/DVD/USB for the reader to conintue

  Original title: MY COMPUTER to a DATE PRIMITIVE WAS BACK UP. IS COME FACE-TO-FACE, A PROGRAM NEEDS A CD/DVD OR USB FOR THE READER TO CONTINUE. HOW CAN I CANCEL THIS MPROCEDURE?

  wanted to back up my computer far earlier. I used the wrong program. It forces me to intall a usb cd/dvdr for the reader to continue. It was a mistake. so now I get a message to do so. How can I cancel this pricedure?

  Hello

  What version of Windows are you using?

  I suggest you try this method, if you have Windows 7.

  Method 1:

  Restart the computer in last good known Configuration.

  Using the last good known Configuration.

  http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Method 2:

  If you are unable to start your computer in last good known Configuration. Start the computer in safe mode and restore to a point where the computer was in a State before starting the backup.

  Step 1:

  Start your computer in safe mode with network and check the status of the issue.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Step 2:

  The restore of the system in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System Restore: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

• HP 2000-2b09WM Notebook PC: Recovery DVD/USB for HP 2000 - 2b09WM, laptop, 320 GB hard drive.

  Greetings.

  I want to restore my laptop HP 2000 - 2b09WM to factory settings, using a restore disk drive or USB.

  Where can I find the disc, iso image or file?

  I can't find on the site of HP, although I found it there before.

  The best solution is to download an image of a DVD, burn myself.

  The next best is to get the HP recovery disk, I can't seem to find it.

  Thank you.

  RCline7

  Hello

  There are two options available.

  1. you can order a set of replacement of the recovery media using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  Note:  If the link above does not work (it is not for me at the moment), try calling HP directly.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  2 another option would be to download the Image of Windows 8 on the following link - Note this Image file is subject to a ceiling of download, you may need to try over a period of a few hours before the download starts correctly.

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  Use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.

  If you instead create a flashdrive bootable for this Image, try the free app below.

  http://Rufus.AKEO.IE/

  The product key for Windows 8 is encrypted in your bios chip and read automatically during installation.

  Software extra and you may need drivers are by entering your full model number or Nr here.

  Kind regards

  DP - K

• USB for C7280 driver does not install on a laptop HP DV8-1093 running Windows 7PRO

  When I plugged my C7280 to an HP Desktop running Windows 7 Pro 64 immediately I had an advertising icon that the drivers are loading it takes 5 minutes and several drivers have been installed, I can print and scan

  on my laptop DV8-1093 is also running windows 7 64 pro, when I connect the USB cable nothing happened, no icon in bottom right and no driver s are installed, I check the cable that he works on the desktop

  WHY drivers won't load

  What can I do for installing the drivers

  Thank you

  François

  Hi frmichaud,

  I understand that the software was not automatically installing for the HP Photosmart C7280. I'll try my best to help you with this problem. The software and drivers are not previously installed on the laptop.

  Here is the download page for software HP Photosmart full feature and drivers, download and save to your desktop.  Follow the steps described in this document for the installation of the printer software in Windows 7 for a USB cable connection. Make sure you unplug the USB cable from the computer and wait that you asked before you plug it into the computer.

  I hope that this information help, please let me know how it goes.

  Thank you

• Belkin router low with USB for storage drive and Windows 7 do not get along?

  Hi all!

  We have a Belkin N wireless router + with a USB stick 'slot' in the back with the rest of the cables. The USB option is actually the only thing that made me buy the router in the 1st place! Anyway, it does not work when connected to the router, even if the network is running perfectly. It is a Seagate external hard drive and when it is plugged it's high lights of the page, there is no power cable so that it can be plugged into the wall. NTFS system I think. I use Windows 7. I tried so many different things, trying to connect this dag on drive to the router, I've exhausted all efforts, it seems. On belkin under my model site there a Belkin Storage Manager, but there isn't even a request, is just a plateau that is located on the bottom of my screen, the only thing I can do for her, is shut, it is the only command that opens. Oh and the website says also I can enter my routers address in IE followed by a slash and the name of my seagate... the drive is H, so I tried different versions of H:, tried FreeAgentDrive, etc...

  .. I think it is a windows problem, b/c not only not Seagate turn on, under the watch USB (via IE, default routers page layout), the connected router settings. In addition to the light on the front of the router is 'active', blue and work.

  HM... I run windows 7 Professional / 64-bit / don't know not what other information I have to give... I don't think that the external hard drive would have it's own IP address when you are connected to the router... could it? Also, my service is comcast with dynamic IP address assignments... so it would not stay dry alike... correct?

  Oh, and the external hard drive works wonderful connected directly to my laptop and an XP computer at work... so router maybe not is not talking computer properly the drive... I should have some sort of security "allowances" on this drive until I put it on belkin?

  I'm sorry this is a NOVEL, someone help please? I've been addressed under and turned off for a year... I get very frustrated with this!

  : D

  Try changing the drive letter and y or X. mohanad

• I plug my USB for my drive firelite external, and it does not work. I tried other things on other forums but cannot get it rectified. I have a Toshiba laptop.

  Help. I'm not completely computer illiterate, but I can't work on the outside.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you when repost you your question in the Forum Vista Hardware at the above address.

  See you soon. Mick Murphy - Microsoft partner

• Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive. We will ask for a driver

  Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive.  We will ask for a driver.

  I did will need you you will need to Prime boot in the BIOS and set to boot from it.

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

• How to install the recovery on 5200 satellite image using the DVD USB drive

  Hello

  I have a problem with a 5200-902 Satellite that has the corrupted DVD - ROM, and I can't find the room to change. (model DVD: uj - 810 b)
  But I would like to reinstall the laptop with the recovery CD and I will not be able to enter the BIOS to change the boot order and start with a USB DVD - ROM.
  I removed the HARD drive and reinstall the WXp Prof by another machine, but when I restart the 5200 I read this message "error nel caricamento del operating system."

  When turning I press F2-F10-F12 but if I select another boot device starting the laptop by network.
  Can you help me get this book by an external USB DVD-ROM?

  Thank you

  Andrea

  There is no test in the past, but I guess you have to do on the track:

  Start your laptop by using the MS-DOS boot disk
  Load the MS-DOS driver for external DVD drive to access
  Boot the CD of facilities here in the hope that it will market

• Portege R100: Problems with CD/DVD Lacie USB 2.0 drive

  Hello everyone, this is my first post here.
  I'll most likely be a regular here I come to buy a R100.

  I am having trouble with an external hard drive that I bought especially for the R100,
  It's a Lacie CD / DVD burner, model number: 300819EK.

  This unit can be powered by AC or by using the two usb ports.
  I use two usb ports.

  The R100 recognizes the Lacie, and in the Device Manager list, the drive is then
  in the list, but he is listed as a drive of Toshiba.
  I'm assuming that this disc of Toshiba external hard drive, you could buy for use
  with the R100.

  The Lacie drive works, but it seems preloaded the R100 CD / DVD
  pilots are contradictory in some way and is made using the player very touched and don't miss.
  He often gets 20% about a facility, then crashes.

  Is there a spare driver I can download that I can replace the toshiba
  drivers with?

  As if by having the Lacie 100% functional means there is obviously a
  How to overcome the problems.

  Hope you girls and guys can shed some light on this for me.
  Thank you.

  Hello, Larry

  You will be very happy if someone will be able to give you some explanations in this regard. I can tell you more: the fact is that this model is created and tested to work with Toshiba compatible external devices. Because of this, Toshiba built in all the necessary drivers in the operating system preinstalled. It should help the installation and also drive fast and quick recognition.

  This does not mean that you MUST use discs from Toshiba. Of course you can use what you want, but the only problem can be when you try to install the OS. Toshiba recovery image contains drivers for Toshiba drives and recovery procedure will work without any problem because the external sides will be immediately recognized.

  I recommend to visit the Lacie support page and check if you can find some driver it. Toshiba has nothing to do with it, if you use a third party product.

  Often, he gets 20% approximately of a plant then crashes sorry but I t did not understand what you mean with it and what you mean with 20%. Second part of your ad is very confusing and I really don t know what you mean.

  Good bye

• USB 2.0 for dos drivers?

  are there any usb 2.0 drivers for dos? If so, how can I install them?

  Are you A player?

  Device = a:\himem.sys

  Who says search on A: driver... like the rest of these commands.

  The A:\ should be the lecteur\chemin for which you have placed the files. Rob - bicycle - Mark Twain said it is good.

• Driver DVD WinXP for Satellite A200

  Please help people dear forum,

  I am running XP on Satellite A200.
  I went to the place on the net to download the driver for xp dvd.
  Research says: no driver available.

  Can someone please send me the driver for XP for a Satellite A200 DVD?
  DVD material is: TSST corp CD/DVGW-TS-632D

  Yes, I know the place to download.
  http://nl.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=NL

  The DVD for Vista 64-bit driver is available.
  But I do not know if it is good to use on XP (32).

  Well...
  Just install the DVD for Vista 64 driver (for 32 sound not available) and my DVD player is still not visible.
  And I guess that moderators work for toshiba, so it's fair to wonder:
  Specific no reason why the DVD for XP driver is not available? Or a more frightening question: XP still supported by Toshiba?

  Very interested in fellow computer useful to receive the DVD for XP driver first.
  And also very interested in the Toshiba answer on my question about the XP support.

  Greetz,
  Nano

  Hello

  > The DVD for Vista 64-bit driver is available. But I do not know if it is good to use on XP (32).
  Sorry, but I didn t find the CD/DVD drivers. or for Vista 64-bit, 32-bit or XP.
  Could you please tell me this driver?
  Perhaps you are which means the DVD player?

  Anyway, the fact is that there are drivers for CD/DVD don t players. Microsoft operating systems (Vista, XP) are already equipped with these drivers and generally you n t need to install third-party drivers 3rd! The STRANGE should be recognized automatically by one of the OS.

  PS: To my knowledge, this is a user forum and I don t think you can find someone from Toshiba here anyway, the XP is certainly supported by Toshiba because the XP drivers are available on the page of the driver. So I see no serious reasons why XP should t be supported. You know

  Greetings mate

• Need Driver USB for Satellite 4090cds

  Hi, I'm new to this forum, I have a laptop 4090CDS, usb drivers are missing, I can not connect a usb device, because it asks for drivers. I searched the download USB section & have also chosen USB in the type of driver selection box, but it is said that there is no download for usb for the 4090CDS. Anyone know where I can find the usb driver for this laptop (laptop has a usb port so I think that the drivers don't exist)? Thanks in advance.

  What operating system do you use?
  Usually it s is not necessary to install the drivers USB 3.
  Windows uses the own USB drivers Microsoft currents.

  Have you installed all the service packs? Your operating system is up to date?

• Satellite L40 - 17r: need driver for DVD Rom for Linux Fedora Core 7

  I'm having a problem in instalation.
  When the installation program asks to select the location for the Viewer it is to say the cd - dvd package and is selected then he pass message to select the driver for this drive or select the disk given.

  I don't have the driver and I use Toshibe satellite L40 - 17r laptop computer I have to do.

  Everyone?

  The problem is that Toshiba doesn't support all the drivers for the Linux OS distributions and therefore you can't find on the page of Toshiba.

• Need Driver USB for Satellite A30 921

  Need Driver USB for Satellite A30 921.
  I can't find.

  Please help me

  To be honest I really don't understand why you need the USB drivers?  :|

  Is it all the USB drivers are one included in the OS. It s no matter what operating system you have. Win XP or Vista.
  Operating systems use the own Microsoft USB drivers and installation of the USB driver is unnecessary. By the way; There is no 3rd party USB drivers ;)

  So now, it would be useful to know what operating system you have installed.
  If you are using XP then you should install SP2 and should update the operating system to the State.

  Furthermore, you shouldn't t forget to install the utility of chipsets Intel (pilot).
  You can find these drivers on the European driver Toshiba-> Sat A30 page area download.

  Hope that this information could help you get the USB port works again

• It is Possible to replace the drive DVD Bluray for HP Pavilion dv6-6176sx

  Hi all

  It is Possible to replace the DVD Bluray for HP Pavilion dv6-6176sx notebook PC Player?

  Thank you

  Of course it isn't yet very difficult. You just need a BR drive or a drive? The replacement drive will be $80-120, or so, maybe a little less. You can find them on eBay. You can use a generic but that may require a redesign of the front or just get a car dv6-6000 BR on eBay. Trade on with a few screws on the bottom. Get out and drag the replacement. You will need new software to play BR movies, of course.

  Post back with any questions