USB 2.0 for dos drivers?

Similar Questions

• Need USB 3.0 for HP Pavilion g7 2351-SC win7 drivers

  Hi, Im desperate. Ive has downgraded this laptop to win7. Everything works well except usb3.0 ports. Can you post me the link for the drivers, or even it would be ok to post me manufacturer and the type of controller. Thanks Peter

  As I have already said, ' I guess he uses the Intel USB 3.0 host controller driverand guess what...» IT THE FACT! Please click the "Intel USB 3.0 host controller driver" link to download this driver, then install the driver and you will be ready to go.

  Please send Bravo

• Whith USB Device error: "Windows cannot verify the digital signature for the drivers required for this device...". (Code 52) »

  Original title: open usb drivers problem

  My Dell laptop stops working with USB storage drivers. The removable driver icon is displayed in the devices window and printers with a yellow triangle around!
  I've tried different USB drivers and the problem persists. I tried troubleshooting, and it does not help.
  In the Properties window, I get the following message:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  I don't remember making any hardware/software changes and do not know how to solve the problem.

  You are welcome.

  Something seems not quite right so contact the store can be a good idea.

  Back to the initial problem as I understand it, is that when you insert an external drive, you get the error 'code 52?

• Win 7 USB controller driver for Pavilion 500 - 217

  Hello, I recently spent again PC of my mother to win 8 for Win 7 64 bit. I can't either driver (Intel or AMD) crystallized under drivers available for the controller USB to work. The hardware ID is PCI\VEN_1022 & DEV_7812 & SUBSYS_2AE0103C & REV_03. I also need a driver for the SM Bus controller unless the driver of the usb controller works for both.

  I should be grateful if you would help.

  Thank you...

  Hello:

  Install the AMD Chipset Driver and restart.  You want to download the chipset 49.7 MB file.

  Who should install the two devices.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  If it does not install the USB 3 controllers, please install both of these drivers.

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• USB 3.0 for g7-2246-Windows 7 driver

  I'm tryingto findthe right driver for USB 3.0 for windows 7 64 bit

  Hello:

  Download and install the AMD Chipset drivers and reboot.  You want the chipset of 49.7 MB file.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• 203tx HP 15r: Usb 3.0 for hp 203tx 15r driver

  My driver for usb 3.0 port do not work well leading to speed low transfer of laptop computer for USB

  Thanks for giving me the proper drivers

  card-Hp 15r 203tx

  Windows pro 8.1

  Hello @Md229,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I stumbled upon your post on the issue of the USB port and want to help you!

  You can find the drivers for your product here: drivers - HP for laptop - 15-r203tx

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• USB and SM bus controller drivers controller driver missing

  Hello

  Recently I have formatted HP Pavilion Slimline PC 400 series and reinstalled with windows 7 32 bit.

  Initially, I found a lot of network drivers are missing. I went through hp support forums, and almost all of the drivers are running on 64-bit with the OS windows 8.1 minimum requirement.

  I could not find anywhere. In Device Manager, these two devices are projected with yellow exclamation point.

  SM BUS controller:

  PCI\VEN_8086 & DEV_8C22 & SUBSYS_2AF7103C & REV_05
  PCI\VEN_8086 & DEV_8C22 & SUBSYS_2AF7103C
  PCI\VEN_8086 & DEV_8C22 & CC_0C0500
  PCI\VEN_8086 & DEV_8C22 & CC_0C05

  USB BUS controllers:

  PCI\VEN_8086 & DEV_8C31 & SUBSYS_2AF7103C & REV_05
  PCI\VEN_8086 & DEV_8C31 & SUBSYS_2AF7103C
  PCI\VEN_8086 & DEV_8C31 & CC_0C0330
  PCI\VEN_8086 & DEV_8C31 & CC_0C03

  Please please give the link for the drivers, so I can use my PC.

  Thanks in advance

  Hello:

  See if these drivers work...

  SMBus:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng

  USB3:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=21129&lang=eng

• USB wireless adapter for computer laptop problem

  Hello:

  The HP laptop with XP get "Low" signal every time I'm in the other room that is not too much longer off the router, about 60 to 70 feet away from him.  Then, yesterday, I got USB Netgear adapter in the hope of trying to get more signal.  Because, says a guy in the store of the computer installation USB adapter is 'boost' to get decent and more signals.

  When I installed the Netgear adapter for the laptop, there is no signal at all and to appear the following message appears in the middle of the screen.

  NETGEAR 111v3 Smart Wizard, WEP Passphrase to create WG and the key manually

  My question is;

  How to install the USB Netgear adapter for laptop?

  Thank you for your help in advance.

  Hello

  The general idea that a USB adapter is a bit a booster dose is false. I'm not sure that you will get the USB Ant thing you don't get the laptop.

  According to the physical environment, 60 to 70 domestic feet with walls is probably beyond the capacity of the wireless router.

  As for your specific question, it seems that USB is correctly installed but must adjust its password security to your current wireless network.

  In general.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Extending remote - http://www.ezlan.net/Distance.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Have verizon usb 720 modem for my laptop. 1603 error codes and Error code 2738 appear when you try to install the update for the device.

  Have verizon usb 720 modem for my computer laptop vista Home Premium 32. Here downloaded update but when get novatel driver the device install failed code 1603. Then he checks the previous versions and the installation States. After 1 min error 2738 VBSricpt moment of action custom execution failed. A verizon tech says that it is a windows problem. Another says that it is a usb device bad 720. Verizon says the rssi-rtt and the rssi on there network evdo should be about - 80 and my poster-98 device manager and-88 most of the time. With 3 bars of signal, they say it's the 720.mkv that's a bad camera or laptop? Can not stream video and Media Player even freezes. Have updates and it started 2 months ago. Any help don't want not to block 2 years for a new modem, if no change. Or would it be the laptop? Thanks for any info.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  Or here:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  They will help you with your question in the Forums above for Vista.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows cannot verify the digital signature for the drivers required for this device

  I get this error from a specialized device that uses a usb/network card connection built-in.  It is with windows 7 Home premium.  Now I know that the source of the driver.  It is the latest driver and labeled for use with Vista.  I need to override this security check, so I can use this equipment.  It is an integral part with me a living. It is likely absolutrly nothing wrong with the driver.  I downloaded from many sites without modification.  This equipment worked well under Vista.

  Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  I found the answer by looking for other sites, it's probably here somewhere as well.  Restart the computer.  During restart, press "F8".  Select Disable Driver Signature Enforcement in the start menu.  This fixed the problem of driver in my case.

• USB 3.0 for macbook pro

  What is the best option to add a USB 3.0 for the port of mini extension on a 17 inch end 2011 Macbook Pro?

  If your computer has no com with 3 USB ports you can improve not USB 3. USB 3 devices are backward compatible, so that they will connect to your USB 2 ports and operate at the speed of the USB 2. You can connect to a USB 3 hub on your computer, but it will operate at USB 2 speed unless you connect it to a USB 3 port on your computer.

• Satellite M70-340 PSM70E: where to find the update of the BIOS for DOS

  Dear,

  I have a problem with my Toshiba Satellite M70-340 PSM70E.
  Some tech guy has messed with my Bios, and now I can't boot from hard disk.

  When im going into the Bios Configuration page, he can see the HARD drive. But at the start, he can't.
  Only on CD/DVD and diskette.

  I need the Flash and Bios for dos.

  Thanks in advance

  Hello

  I think that you will not get it from the Toshiba page and you would not be able to download this traditional version of BIOS.
  As far as I know that you can download the version of the BIOS win and you can update the BIOS ONLY when the Windows operating system is running.

  But maybe the Toshiba ASP in your country could be useful. I recommend you contact the guys to get more details and maybe the guys could provide this BIOS or maybe they would Flash the BIOS.

  In my opinion only the ASP can help you.

• Can I have simultaneous USB and LAN for IX4 connections - 300 d?

  Can you have a USB to PC connection and a connection to the local network (ethernet) at the same time?

  I have not gigabit LAN (yet) and I have a few files that I need to transfer a PC, so I thought using USB 2.0 (not 3.0 yet) would be faster. So, I would just periodically connect the IX4 to PC via the USB port while it is still connected to the local network. Are there problems with it?

  ix4s USB ports are for drives external, printer or connections UPS only (ix4 ports are host ports) and not for connecting another host (customer e.g.PC).

  No luck...

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• I'm looking for missing drivers!

  I'm looking for missing drivers!

  I have ACER ASPIRE E1 - 470 downgraded to Windows 7 64-bit

  

  Try here probably first chipset:

  http://www.driverscape.com/manufacturers/Acer/laptops-desktops/aspire-E1-470/102809

  This site must be safe, but you can have the antivirus running anyway.