CD read - Error Message: Build with Autorun CD Studio has stopped working.
I am running Vista and have had no problems reading CDs or DVDs. However, I have a CD of my teacher built with Autorun, who will not play on my computer. I tried 2 different copies without success, but the 2 same CDs play on all computers in the school and on the computers of the other students. I have Microsoft Powerpoint and Word, that are required to read the files on the CD. When I insert the CD, I get the opening menu, but when I try to select any specific topic, I get the error "Build with Autorun CD Studio has stopped working" message. I have downloaded and run the Microsoft FixIt! Program diagnosis/troubleshooting of Microsoft Support, but he could not find any problems. I need this CD for upcoming classes and don't know what to do?
Hi pinkpugsy,
1. are you able to browse the contents of the CD using Windows Explorer?
It looks like Autorun CD Studio program is defective. We recommend you to uninstall and reinstall the Autorun CD studio software on your computer and check the difference.
Note: before you remove the software, make sure you have the Setup file of software with you.
Step 1: Uninstall or change a program
a. see Uninstall or change a program
b. Once you have uninstalled the program, restart the computer.
Step 2: Install the Autorun CD Studio software. Once you have installed the program, restart the computer and check the difference.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
From time to time I get an error message pop up saying "Windows Explorer has stopped working"
Original title: Windows ExplorerOccasionally I get a pop-up box saying "Windows Explorer has stopped working" another "Windows Explorer restarts? -for example. Control Panel - change background. What can I do?
Hello
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3Hope these helps.
-
Everything started happening a few weeks and now it happenes every time I enter live auction... anyone knows maybe what's the problem?
Hello
1. is the issue limited to this particular software?
You can try the methods provided below and check if the problem persists.
Method 1:
Run the program as administrator
(a) right click on the system of transfer of Pes Version and select Properties
(b) click on the Compatibility tab
(c) under the privilege level, put the check in the box for run this program as an administrator
(d) click on apply
Method 2:
You can try to uninstall and reinstall the software and check if the problem persists.
Try the steps in the link below to uninstall a program.
Uninstall or change a program
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
To install a program click on the link below.
Install a program
http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program
-
It is said there is a solution available, but the solutions don't make much sense to me. Ive has run a virus scan and nada. I need help.
Hi Momoftwins,
Try the suggestions in this post to see if it can clean the virus.
Hope this helps, good luck.
JohnD
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Last week, I had to wipe my hard drive, reinstalling OS X 10.10.4 (then update to 10.10.5) and restore all my files. I do not often use the CS4 but I needed to open Dreamweaver CS4 just now and all first, he wanted Java Runtime 6 - that I found and installed. Now I get the 150:30 error message: a license for this product has stopped working. I have the SN of the project - it is registered. But I can not get Dreamweaver or Photoshop (or any what other applications in the package, I guess) to run. What should I do to remedy this? As I said, I do not often use CS4, but sometimes I have to get to some old files using Dreamweaver and Photoshop. So, I want to make it work.
Hi judith,
Please try the following steps: error "Licensing has stopped working". Mac OS
Best regards
Maurice -
I get a message saying that dell support center has stopped working. Anyone know why?
I get a message saying that dell support center has stopped working. A problem prevented the program to work correctly. I don't know what I should look for to solve the problem. Help, please.
Hello
as you have problems with the Dell software, contact Dell:
Dell support at the link above.
http://en.community.Dell.com/support-forums/default.aspx
Dell's Support Forums at the link above.
-
I get messages that support and problems Windows has stopped working. I told myself that I will advise if a solution is found, I get another box saying that I have to close becausse that Windows does not work. I also get messages that I have not more memory on line 2. What can I do to fix this?
Hello
1. could you give us the exact error message?
2. Once you get this error message? This is when using Internet Explorer?In the meantime, check out the articles below and check. Try to increase the size of pagefile.sys and check.
http://support.Microsoft.com/kb/2267427I hope this helps.
-
Error on blackBerry Smartphones: Blackberry Desktop Manager has stopped working
I use Desktop Manager 4.7.0.32 with a Blackberry Bold (9000); I sync with Outlook 2007 and I am running Windows Vista 64-bit Ultimate w / SP1. Synchronization worked well for many years with previous blackberries, but the synchronization problem appeared after a year or two of use with my previous camera curve. I replaced the curve with the bold thinking which damaged equipment could be the problem (one too many drops).
However, the problem persists. While it seems I can synchronize with success a way (from PC to BB), Director of office falls down to halfway through synchronization of calendar entries in a synchronization two-way, unless there has been no new entry calendar on the BB. The error is an error generated windows inidcating: Blackberry Desktop Manager has stopped working.
I tried every solution I could find on the web, namely:
- Uninstalling and reinstalling Desktop Manager, making sure that I run the installer as administrator.
- My Blackberry wiping and reinstalling the operating system (I use 4.6.0.162)
- Delete the Intellisync folder
- Run scanpst on my Outlookpst file
- Clear the entries of calendar on the Blackberry (temporary solution only)
The latter is the only approach that has produced no results. If I delete the entries on the Blackberry, the
process synchronization adds them correctly, and the next time I run the synchronization, it works without a hitch. As soon as I did all the entries on the BB unit however, Desktop Manager crashes again, and the only way I can make it work is to clear the entries on the Blackberry and start over.
I'm several months and both handsets of BB has invested in this issue now. I have a new fancy camera, but am recorded in writing of the appointments on paper when I am out of the office because I know they used to synchronize if I enter them at BB. Type of defeated half the point of a blackberry...?
Getting desperate here. Help is appreciated.
Brad
Hello Brad!
I had the same annoying problem that you guys have described here.
After trough fishing a lot of post and forums I found a very surprising solution for another type of BB and a different version of the DM on XP and not Vista. Being desperate I tried and miraculously it worked!Start the DM BB and go - Syncronize - set - synchronisation - synchronization (button) - calendar - Advanced (button) - mapping fields (field mapping button) and I got rid of the synchronization between the flag "alarm" and the "free occupied" and the fields "invited".
I did it and now everything works perfectly.
I have a BB Bold, Vista Ultimate (32 bit), MSOffice 2007 (PRO) and a DMv4.7.
I hope it will work for you also.
Kind regards
Steve -
After I download and install games since the game first, big fish games and try to read a message box if poster indicating the name of the game has stopped working and that his search for a solution and you inform that a solution is found. Here are the games I bought on these sites. Games I buy in stores and install work. Am I missing a driver or something?
Hi Knbrown,
Welcome to Microsoft Vista answers Forum!
Most of the online games use Java and Flash Player. If Java or Flash Player is not updated, you can get this error message.
I suggest that you install the latest version of Java and Flash Player and make sure if you are able to play, you can see the link to download the latest version and install it by selecting the appropriate operating system:
http://get.Adobe.com/flashplayer/
http://www.Java.com/en/download/index.jsp
If the problem persists, I suggest that you check with the manufacturer of games for assistance, you can check the link: http://bigfishgames.custhelp.com/app/home
Let me know if it worked.
Thank you, and in what concerns:
Swathi B - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
twice now that I got "Microsoft (C) registry of Windows has stopped working". Looking for online solutions, it tells me to update... and yet my Windows Update is underway. What is going on??
I am traveling and using my Android phone by Verizon to tie to the internet... This could be the cause?
Hi BetheForcia,
Exactly when you receive this error message?
Usually, this can happen due to data execution prevention.
In order to diagnose the problem, you can check in the event viewer to determine the cause of the error and after return with details of the event viewer.
What are the information in event logs? (Event Viewer)
You can try to add it in the exception for the prevention of execution of data and check that it works.
a. go to Start, Control Panel and click on System.
b. now, click on the Advanced tab, and under performance, click settings.
c. click on Data Execution Prevention , and then select the Turn on DEP for all programs and services except those I select: radio button.
d. now click on the Add button and navigate to C:\Windows\System32 and choose the regsvr32.exe file. When you receive the message indicating it could make your computer becomes vulnerable to attack and unprotected, simply click OK to continue.
e. click OK , and then click OK to exitHope the helps of information.
Please post back and we do know.
-
My windows live mail has stopped working correctly: I can view my Inbox but not send emails, because a box appears and indicates a problem with this caused page internet explore to stop working. This seems to be connected to the other problem I have with windows live messenger, who says his side by side configuration is incorrect.
I uninstalled windows live essentials and reinstalled it but still the same result. Have also installed all updates via the windows installer.
I am close to throw the computer because the problem seems irreparable: HELP!
Hello
The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/
-
Any help would be appreciated thanks
See error: "License has stopped working". Mac OS for instructions on how to use it.
Link to the download tool:-Adobe licensing repair tool.
Kind regards
Assani
-
I get a message, that the settings Windows Live has stopped working.
EWvery time I turn om my PC I got the same message that 'Windows Live Settings' has stopped working. I don't remember making any deliberate Exchange og who downloaded the other thing as recommended updates. Why this happens, and what I can do to remedy this. When I ask Windows to find the solution to the problem, noting happens.
Kind regards
Nils Freitag
Denmark
Hi Nils Freitag,
Updates Windows do you have installed? the KB number
Simply specify the full error message that you receive for assistance.
It is possible that the Windows Live Mail program on the computer is damaged.
Method 1: You can see the steps mentioned in the link below that addresses this question
http://windowslivehelp.com/thread.aspx?ThreadId=21ef6e95-698a-4687-A606-eb42d1a4a45c
Method 2: Put the computer to boot and then check if the problem persists
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.
Continue with the remaining steps to pin-point on the third party service.
After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.
For more specialist on this question help, you can post your question on the Forum Windows Live.
Windows Live Forum -http://windowslivehelp.com/
Thanks and greetings
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
Message at startup of windows Explorer has stopped working
Start up message: windows Explorer has stopped working. Screen goes black when the message is closed.
Windows vista spk 2.Problem report:
Product
Windows ExplorerProblem
Stopped workingDate
15/07/2011-17:03Status
Not reportedSignature of the problem
Problem event name: InPageCoFire
Error state code: c000009c
Type of media loopholes: 00000003
Name of the damaged file: wmploc. DLL.mui
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160Files helping to describe the problem
Version.txt
AppCompat.txt
Memory.HDMP
minidump.mdmpCan start in safe mode.
Tried to restore former point but the restoration does not end.
Thanks for any helpHello
I suggest you to follow these steps and check if that helps:
Method 1:
Start the computer in safe mode and check if the same problem occurs:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeMethod 2:
Try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
It will be useful.
-
My computer message of the Action Center said: "your Intel Graphics Driver has stopped working twice?
What should I do to solve the problem?
Hello AletBotes
Try to uninstall the old version of the graphics driver Intel or by reinstalling fix it. It is always best to update the drivers to the latest version you can find on the website of the manufacturer of the computer. If you have no problem with the video/graphics and if the Action Center message bothers you in any way, you can turn it off in goin to this place the Center Items\Action Panel\All Control Panel control and then in the left pane click on change Action Center settings > uncheck the required Notification or uncheck everything. Click OK. That's all.
Maybe you are looking for
-
Transient analysis fails: Timestep too small
I use Multisim 10.1 to assemble logic gates of transistors for an undergrad Electrical engineering class. Part of the specification is that doors should drive a 1 or 8 pF capacitor at the output in the 1nsec voltage. (I think that the circuit, which
-
How to migrate Win 2000 Server Ad to Win 2003 Ent. Server
Dear all, Please help me. I'm going to migrate my Active Directory to the desktop of Windows 2000 SP4 for Windows 2003 Enterprise Edition 32-bit SP2. I know it's too late to do this, but I have no choice, my admin old office this is done than why I h
-
When I get the password then the screen is blank
10 dec night my pc has been dishcharged and forgot the accused. On Dec. 11, morning I connect the adapter and start my pc, but wouldn't start because when I enter the password after, then the blank screen is show. I tried to open the battery and remo
-
I have Vista 64 bit machine and when I tried to install a game, I came across a DEP problem which I fixed it by putting a check in the "enable DEP for all programs and services except those I select:I ran the game without any problems for 2 weeks or
-
Trustpoint when you install the certificate of identity via ASDM
I got a certificate of identity through a CSR to a CA. It has installed successfully, but ASDM put under a new trustpoint, who does not have the CA cert chain trustpoint. The CA cert for the issuing CA is on the SAA under a different trustpoint. I