Cell calculation is a bit slower

Similar Questions

• Hello... just asked this, but not sure it sent... new laptop, no cd/dvd player, need to install my design cs6... standard have code # and product series, but the only download link, I found was a bit slow (14 days and count - up - when it expired,)

  Hello... just asked this, but not sure it sent... new laptop, no cd/dvd player, need to install my design cs6... standard have code # and product series, but the only download link, I found was a bit slow (14 days and count - up - when it expired, haha)... hoping someone can help, please and thank you

  You can try with below steps if you want:

  Folder Temp light 1).

  (2) close all running Applications.

  (3) close webistes all opened browser.

  (4)disable the firewall temporarily.

  (5) open only Adobe Web site as it is safe and secure site free of all kind of threats.

  (6) then try to download CS 6 Design Standard and check.

  Note: Though the firewall is disabled. do not open applications, files or even other Web sites.

  Or if you think it is still very slow and would not turn off the firewall , you can try with 3' rd party like download managers: IInternet Download Manager , which is more efficient than the browser built in downloader.

• Windows 7 32-bit slow start of blue circle hangs on the network icon in the tray for 10 minutes, some programs don't load until the problem resolves.

  Hello world.

  It will be long and windy.

  I have a problem with my Dell XPS M1530.

  im going to write down the details of my question, short first. so if you want you can read my short story on my laptop and I.

  • Slow start.
  • Network at startup initialization problem.
  • Blue circle weighs on my network icon in the taskbar notification for 10 minutes or more. then she disappears with the problem that everything starts to operate correctly.
  • some startup programs do not start until the issue is resolved. (blue circle disappears) i.e. Dell touchpad, magic disc, pda.net and perhaps language bar.
  • programs that have to do with the network or the internet such as IE or center network to hang until the issue is resolved.
  • Some programs won't load if started up that the problem is solved. i.e. open office, cakewalk sonar.

  Another thing, I noticed. If I have automatic network connection configuration and the network is in range when I launch firefox I can actually serf the web regardless of the question.

  I'm not the only one having this problem, but solutions that work for some do not work for me. some of the things I've tried to understand.

  • has run msconfig to see if it is one of the start up programs or cervix causing the problem. found nothing.
  • has ran the command cmd, I forgot what's it called some thing/something else. It digitizes and restores the registers according to me. did not help
  • Used pc AVG scanner. then corrected all the errors found and the questions. did not help.
  • reinstalled the network drivers. did not help.
  • Ran startup recovery tool to fix problems at the beginning. did not help.
  • Booted up my laptop in SafeMode with network. Works very well

  Also, the problem started not with win 7 install I had it on my laptop well before the Enigma.

  im running Windows 7 Professional 32-bit. as if lately, about 3 months ago, my laptop started to start slowly and be laggy when the system boots. I have no much attention at first. Since the question does not disappear on its own, I noticed that my network in the notification bar icon has a blue circle probably because its network initialization or loading something that is bound to it something as is. After about 10 minutes the issue resolves itself and everything works fine until I have reboot or restart. also if I put my laptop to sleep when I start it it works fine. I think that the time to resolve that issue got longer it is about 10 min now but it used a lot less. at least that's what I recall. In addition, I noticed a few more things. If I left click on the network icon does nothing when normally it will display network connections. If I right click on it displays troubleshooting and Open Network and Sharing Center. Troubleshooting doesn't help and returns nothing. Network and sharing Center is suspended until the problem resolves. in fact, some programs won't load until it the problem goes away like internet explore, network and sharing virtually Center almost everything what has to do with the network and also other programs that require a little more resources e.g. cakewalk Sonar. In addition, other startup programs and services such as Dell touch pad, magic disk, PDA. NEt don't start until after the problem goes away. What else... the kicker is that while the issue is to present the networks I connect to automatically are in fact very well and I have internet, even though the network is still initializing. what I mean is that if I start my portable firefox and launch (cannot use IE because he hangs up) I can go online and the serf of the web.

  Well, I am at a loss and don't know what to do next, except to format and clean install. However, people who did it until the problem was which leads me to believe that this is one of the windows updates may be.

  If someone knows how to fix this problem or can give a kind of constructive contribution, I'm all ears.

  Thanks in advance.

  Hey Kosmosis,

  I had the same problem, and after fishing trawl through the web to find answers, this is the most reliable solution that I found. At the very least, it will help to determine where the problem is.

  (1) reboot your computer.

  (2) go to Run--> services.msc

  (3) to sort the list by status (click the heading)

  (4) see those blocked at the 'boot '? These are your incriminated objects.

  Apparently, Windows has problems initializing services, and until he solves, or give up, he can't go the rest of the startup procedure. Different people get stuck on different things. For me, it was the 'Server' service as jams it for 20 minutes or more.

  You have 2 options:

  Right click 1)--> properties and change the Startup Type to "automatic (Delayed). This requires to load later, that hopefully allows all the rest at the end of initialization so that you can use the computer first.

  (2) read the Description of the service and see if you can find whats causing it to get stuck. In my case, 'Server' rule of network discovery, file sharing and printing. I realized that I UNPLUGGED a NAS from Buffalo, who worked as a print server as well. My windows was blocked to find a printer on a network that was no longer available. Remove the printer from devices solved the problem.

  If all else fails, you can always try to disable the service. This is probably not the best reccomendation, like its there for a reason, but it might help you to troubleshoot.

• Windows 7 64-bit slow start of blue circle hangs on the network icon in the notification area. Some programs don't load until the problem resolves. stuck at the screen of welcome for 5-10 minutes sometimes.

  Hello world.

  It will be long and windy.

  I have a problem with my ASUS G50VT - X 5.

  im going to write down the details of my question, short first. so if you want you can read my short story on my laptop and I.

  • Slow start.
  • Network at startup initialization problem.
  • Blue circle weighs on my network icon in the taskbar notification for 10 minutes or more. then she disappears with the problem that everything starts to operate correctly.
  • some startup programs do not start until the issue is resolved. (blue circle disappears) i.e. adjustment of splendid colors, services, programs of control really like network connections and things like that but some i can still run.
  • programs that have to do with the network or the internet such as IE or center network to hang until the issue is resolved.
  • Some programs won't load if started up that the problem is solved. for example, microsoft outlook and other things.

  Another thing, I noticed. If I have automatic network connection configuration and the network is in range when I launch firefox I can actually serf the web regardless of the question.

  I'm not the only one having this problem, but solutions that work for some do not work for me. some of the things I've tried to understand.

  • has run msconfig to see if it is one of the start up programs or services is causing the problem. found nothing.
  • run the cmd command, I think that the chkdsk. It digitizes and restores the registers according to me. did not help
  • Used norton. then corrected all the errors found and the questions. did not help.
  • Ran startup recovery tool to fix problems at the beginning. did not help.
  • Booted up my laptop in SafeMode with network. Works very well

  Also, the problem started not with win 7 install I had it on my laptop well before the problem.

  im running Windows 7 Professional 64-bit. as if lately, about a week ago my laptop started to start, slow down and be laggy when the system boots. I have no much attention at first. Since the question does not disappear on its own, I noticed that my network in the notification bar icon has a blue circle probably because its network initialization or loading something that is bound to it something as is. After about 10 minutes the issue resolves itself and everything works fine until I have reboot or restart. also sometimes on occasion I will be stuck to the homescreen for 7-10 minutes.  also if I put my laptop to sleep when I start it it works fine. I think that the time to resolve that issue got longer it is about 10 min now but it used a lot less. at least that's what I recall. In addition, I noticed a few more things. If I left click on the network icon does nothing when normally it will display network connections. If I right click on it displays troubleshooting and Open Network and Sharing Center. Troubleshooting doesn't help and returns nothing. Network and sharing Center is suspended until the problem resolves. in fact, some programs won't load until it the problem goes away as internet explore, network and sharing virtually Center almost everything what has to do with the network and also other programs that require a bit more resources. What else... the kicker is that while the issue is to present the networks I connect to automatically are in fact very well and I have internet, even though the network is still initializing. what I mean is that if I start my portable firefox and launch (cannot use IE because he hangs up) I can go online and the serf of the web.

  Well, I am at a loss and don't know what to do next, except to format and clean install. However, people who did it until the problem was which leads me to believe that this is one of the windows updates may be.

  If someone knows how to fix this problem or can give a kind of constructive contribution, I'm all ears.

  Thanks in advance.

  I also looked in the event viewer and noticed these problems...
  The winlogon notification subscriber took 916 second (s) to handle the notification event (Logon).
  -

  -

  6006

  0

  3

  0

  0

  0 x 80000000000000

  56201

  Application

  Collin-PC

  -

  TermSrv

  916

  Opening of session

  02000000

  and it was lower than...
  Bucket of error, type 0

  Name of the event: ServiceHang

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: LanmanServer

  P2: srvsvc.dll

  P3: 6.1.7601.17514

  P4: 20

  P5: 2

  P6:

  P7:

  P8:

  P9:

  P10:

  Attached files:

  C:\Windows\Temp\WERBC1D.tmp.WERInternalMetadata.XML

  C:\Windows\Temp\WERBC1E.tmp.HDMP

  C:\Windows\Temp\WERCBA9.tmp.mdmp

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppHang_LanmanServer_958bb07ee47f1d58779ce0fb489791f2b7187bdb_cab_0de8cef2

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: 0de8cd67-d5a8-11e0-a8a7-9ab1f0009500

  Display state: 6

  and below that,.,.

  The winlogon notification subscriber takes a long time to handle the notification event (Logon).

  Hello

  1. Since when are you facing this problem?

  2 have you made changes on the computer before this problem?

  3. do you get any error code or error message while starting?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  If you have not tried the steps in the following Microsoft article, then try to clean boot and check if it helps.

  How to solve the problem by running the clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Step 1:

  If the problem persists, you can create a new user account and check what is happening. To create a new user account

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  If the new user account works fine then the old account has been corrupted, you can follow the link given below to fix the corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope the information is useful.

• Windows 7 pro 64-bit slow start up AND slow reinstall

  So I get up in the morning, play my usual MMO... which is actually in beta at the moment. But I had to leave and I left my computer running. I come home after 6 hours or more, and it is completely off. Mind you, I have sleep mode and never close under the power management settings. I use a computer tailor-made with Asus M5a87(I think that's correct), AMDphenom ii x 6, 4GBx2 ddr3 am3 (8) and (don't laugh) ati radon hd5550 1 GB video card. I bought the motherboard, processor, RAM and HD (1 to) all at once on a year and a half. I overclocked my video card, but only a little bit to where he barely makes a difference.

  in any case, I come back home and my computer is turned off. I have a protecter surge, not this old dusty or hottest with other cards. I turn it back on and I'm greeted by a bunch of 1.5 hours to the top. At the time where I'm not even on the desktop, I am then greeted with a Standard gray windows task bar and all programs, including the start menu, are super slow and the gel to the top. Imagine that Windows 2000. I try to turn it off properly but who ends up being an endless cycle, so I invited a closed group. I've put it back later on, once again super slow. White/black menu appears asking if I would try startup repair. Don't know why not? It takes so all night. Nothing is 'evil' with the commissioning. So I pop in my Windows 7 cd and I boot from the CDROM. I try to run from the cd startup repair. Same results. I start from the CD, this time trying to restore a few weeks a "last known good configuration". Yet once, lasts approximately 5 hours and ends by saying that it cannot be restored. I try later. Once again, impossible to restore. So, today, I get home from work, thinking I'll just do a fresh install. I travel by this new facility and then this, once again, is super slow. It was "Expanding Windows files" for 3 hours and I'm still at 31%. I'm sorry. I happened to test both RAM sticks, they are Kingston HyperX series. (One out and try one at a time). If ever, I can't get it on my desk, I can never understand if its my processor which really slows things to the top or not. I can't on the desktop. So any help I can use inside the Bios would be nice LOL.

  I would like to close my question as "answered". 'S done it, the hard drive that was fried. So I hope that this question will in the future to help other people.

• Visual C++ 2010 Express on Windows 7 64-bit slows everything

  Hello

  After suffering for a week, I can find no clear response from everyone and decided to seek the help of this community. I am trying to do the work of development using Microsoft Visual C++ 2010 Express. I recorded my Visual C++ so that it works without obvious interruption. When I am trying to build my code in Visual C++ Express, it slows down the normal behavior of my machine. For example, a browser window or a file browser explore (My Computer) takes about 20 seconds to appear after clicking. The volume control bar takes forever to pop up. I followed the process on the Task Manager window, but nothing is abnormal, and memory consumption is well below the red line. More important still, this happens whenever I try to work in C++. Do not do Java (Java obviously has its own virtual machine so everything goes not on a virtual computer died there too; does not affect the machine). The only problem I managed to isolate is probably the 64-bit windows.
  I've been Googling for an acceptable answer but can't find anything. People are formulating opinions ranging from the instruction sets at low altitude on the PC with the ambiguity of high-level code. I don't know what on Earth is wrong. I have core i5, Memory Cache L3, 8 GB of RAM and 500 GB HARD drive. This cannot be a problem of the standard of PC...

  Hi MannaAnam,

  For assistance on this issue, you can post the question in the link below:

  Visual C++ Express Edition
  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressvc/threads

• CS6 13.0.1 32-bit slower type? Windows 7

  Hello

  I upgraded 13.0.1 cs6, I run under 32-bit w7

  I guess it's the last vesion

  When I try to type there is a lag...

  for example I type "this photo is protected", well, I had a lag when I hit 'it '... »

  I have not noticed under 13.0.0

  and another question, is there a different between photoshop cs6 independent and the version included in the collection as mastercollecion, and so on

  I have the stand alone normal not extended

  but a friend of mine runs photoshop cs6 32 bit, he got the master collection, under w7 and he told me that it is slower then the stand-alone version

  Thank you

  see you soon

  Latency / delay face you in the entry of 'Text' is to do with the amount of fonts and the integrity of the same thing you have on your system. Photoshop analyzes all fonts at the launch. However, when you launch the tool of 'Type', the fonts are re-analysis and are made available to you. That's probably why you're facing this "lag". 'Type' Selection tool, you will get a message "Initializing Type Tool". Give it some time, and then create your text layer to see if this problem still persists.

• I7 quad PC, 12 GB RAM, 64-bit slows down after several click operations

  My usual assembled quad i7 PC is about a year old.  I had a recurring problem of the working speed using the mouse during video editing.  The first mouse functions start clicks quickly to the Premier Pro and other Creative Suite CS5 software.  However, after only several mouse clicks, nothing appears to register.  After a short time, mouse clicks become active again but the PC becomes slow.  It was recommended that I check with Adobe to confirm that my system complies with the specifications of the Creative Suite CS5.  As far as I know, the system exceeds the specifications of the software box.  I fear that one of the RAM modules may not be meeting the specifications for speed.  How can I check this for the following configuration or other suggestions?

  -ASUS P6TWS Professional Motherboard

  -Intel Core i7 920 CPU

  -12 GB OF DDR3 1333 RAM

  -4 HD 1 TB

  -Video card ATI RADEON 4670 1

  -Coolermaster 690 case separate real power 700W

  -LG BlueRay writer

  My CS5/AVCHD 1st Impressions http://forums.adobe.com/thread/652694?tstart=0 includes a link to the computer, I built, with similar and very different things

  Win7 64 bit Pro with all updates (automatic) and with all updates (automatic), so the body is 5.0.3 CS5 Master Collection

  Wired keyboard and mouse (old style, no USB) using the generic driver for Win7... not intellipoint, I've read in other messages CAN cause problems

  Connection through DSL modem, which is also a network of House (2 computers) via the DSL modem

  I had ZERO problems of any kind, with the body

  My best guess is that, Yes, the "bells and whistles" of your intellipoint mouse driver CAN cause problems... but with a wireless mouse, YOU indeed this specific driver to make the mouse work not at all

  Sorry... I don't have any other ideas to offer

• my mac book air is bit slow good tips to speed up pls

  my mac is very slow at startup and I have also use all the memory I erased files additional pls suggest what to do

  You can go to the Apple menu > System Preferences > users and groups > elements opening and review, which is set to open when you connect.

  In addition, while it should start very quickly is really not necessary to stop it. I rarely look close - usually just close the lid and let him sleep.

• Edit cell in multicolumn listbox is slow

  Hello

  I want to do an editable multi-column listbox where users can perform a derivation of the channels, using of-1 in 1 to subtract channels. Now when I put the multiclomumn listbox with editable cells, it must be a least a second (run-time) really needs something in the cell?

  Furthermore, how can the cell clicked, position? I can't get the property node "Active cell"? I want to bring up a dialog box when you click on the cell, I can fill its value...

  Anyone know how to speed up?

  Best regards

  Thijs

  Fact!

  Kind regards!

• Chinese PC troubleshooting Windows 7 32-bit slow and random freezes

  A user has a Windows 7 PC from Dell's traditional Chinese version.

  During the investigation into his slow and problem of slow performance (random freezes), I tried running sfc/scannow in command prompt. However the command stopped at 56% with an error message regarding the protection of resources (sorry it's in Chinese), so the sfc has not completed.

  When I tried to start Windows in safe mode, the options menu advanced boot could not be considered. It was only a black screen. Clues? Someone has already tried to uninstall the antivirus software. User customer a lotus notes 8.5 is installed.

  People, I thought that random freezing is caused by a failing hard drive, so we replaced the material.

  Thanks for reading.

• 7 64 - bit slower than 7 32-bit

  Hi all

  I installed Windows 7 x 64, (given that some experts advised it instead of x 86 for me!). But this version is slower than the previous one (7 x 86). Why?
  PS: 1 - the applications are the same for both.
  2 - I have no malware.
  It's my form of system.

  3 - my measure is time. For example, the time that Windows runs the startup applications and also if you are using Windows. I feel and see the slowness of this x 64 compared to the x 86 one.
  I think that the (pilots) fine and see no reason showing that they are not.
  The speed of applications running at startup (applications at the bottom of the screen on the right) is very low (in comparison), but also after that, overall speed is not bad but it is less than 32.

  4. I think the problem belongs to the RAM. I knew that x 64 is certainly for machines that have more than 4 GB of RAM and the most important factor, is WoW.

  Do you agree?

  Download and run ADWCleaner:
  http://www.bleepingcomputer.com/download/adwcleaner/

  Download and run the Junkware removal tool
  http://www.bleepingcomputer.com/download/junkware-removal-tool/

• WS 7 time in Win 7 64 - bit slow loading...

  Notice that by clicking on the icon VMWARE WS 7 Windows 7 64 bit takes about 5 seconds to display the GUI... No further questions, everything changes... No excess usage of the CPU or disk reading at the launch of the program, just the odd delay...

  Anyone else seeing this?

  Thank you!

  Not sure if this will help, but you might want to look here:

  http://communities.VMware.com/message/1406687#1406687

  Lou

• Explore Windows 7 64 bit slow loading screen and windows welcome does not

  Hello guys :D

  I had this problem yesterday and look really weird because I use several method to solve for 'Blocking with the Welcome screen' or 'Windows Explorer is not responding. So here's the problem:
  As I said, I had the windows with the "Welcome" screen stucks But some time later, about 15 minutes that it full load. Well, THIS IS more BIG PROBLEM: my office was black with my cursor! About 10 minutes, this return to normal, BUT the icons are not loaded. And when I click on any folder or right click of mouse, WINDOWS EXPLORER IS NOT the ANSWER (error status code c0000185 InPageCoFire) and need to restart. I restart and once again, does not. My laptop is now like that, turn on, wait 15 minutes and watch "Windows Explorer is not responding" and turns off.
  It makes me really mad. So I really appreciate for your help. Sorry if this question was asked before

  Uh, seems to be still the gel, you can try another way! Enter again the Advanced Boot Options, then choose 'Safe Mode'. Your loading windows basic drivers and services that could help you get into the windows desktop without encountering any problems. Once you're in safe mode, tap Start menu and search for "cmd". Right-click on 'cmd' and select them "run as Administrator". When the command prompt appears, check your disk file system error hard by typing "chkdsk c: /f" (do not type the quotation marks) if "c:" is a drive letter on your Windows 7. Restart your computer, and it checks file system of the disk for errors. When the analysis was finished and reboot, re-enter the Advanced Boot Options, choose "Safe Mode" again. And then open command prompt with administrator, and then type this command "sfc/scannow" (do not type the quotation marks). SFC (System File Checker) can check your file system were healthy or not. Wait until after the analysis. Then, restart your computer. If these tips don't help, update your status question. :)

  

• I have an asus k53z. When I connect to the tv via hdmi hd, out of netflix hd images are a bit slow?

  See the topic.

  Hello

  The question is limited to NetFlix?
  Silverlight uninstall and reinstall. Follow the given steps and check whether the problem is resolved.
  Method 1:
  To uninstall Silverlight, check out the link and follow the steps.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  Method 2:
  To make sure Silverlight is completely removed from your computer, visit the link and run the Fixit.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
  Method 3:
  See the link, download and install the latest version of Silverlight.
  http://www.Microsoft.com/Silverlight/
  Method 4:
  Update drivers and check if it helps to solve the problem.
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
  You can also check out the link below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  For more information, you can check this link:
  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows7/connect-your-computer-to-a-TV
   
  If the problem persists then post the question here:
  http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx