Center Virtual Server Plugins

Similar Questions

• Center virtual server appliance 5.1 and 5.1 view composer

  Espero esta ultima sea mi pregunta

  VMware virtual center server device works con con vmware view y en con especial composer? No encuentro eso still acerca information

  Saludos,

  Hola

  Probe vcax 5. 0 b y composer 3. Not to speak, por lo, tras not find information, supongo than no work. Tampoco el appears matrix promotion device en el

  http://PartnerWeb.VMware.com/comp_guide2/SIM/interop_matrix.php

  Saludos

• I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center

  Original title:

  Virtualization server 2012

  I got too many answers to this question. I need the correct answer before buying any CALs galore.

  I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Mobile Center Virtual VM to physical server

  Hello

  In fact, I have 2 ESX 3.5 with an ISCSI SAN. I would like to reinstall the virtual server of the centre, with is on a virtual machine today, on a physical server for performance reasons (many alarms in case of large CPU usage for this virtual machine) and practical reasons (updated the firmware of the SAN, I have to stop all the VM, so it will be easier not to have Virtual Center on SAN.)

  I saved 2 databases on the Virtual Center.

  I think that to stop my VM virtual Center. Install VC on my physical server that has a different name . Restore the database on the new server... and that - of all the people... Am I wrong? You see an error in this

  Thank you

  Hello

  VirtualCenter migration to another server

  http://KB.VMware.com/kb/5850444

  http://KB.VMware.com/kb/1003052

  I hope it's useful...

• P2V - System Center Virtual Machine Manager 2008 R2

  I am running Microsoft System Center Virtual Machine Manager 2008 R2 on a Windows Server 2008 R2 with SP1 enviornment.

  I am creating a P2V Conversion in the P2V Assistant and 'Conversion of information' section, I get the following error message:

  Error (3210):

  And\pr boot volume system \\?\Volume{2dbb99c1-ba73-11de-97ae-806e6f6e6963}\ was not selected or is not found on the

  source machine >.

  Recommended action:

  Selected machine > cannot be virtualized. Verify that the system volumes and boot are selected for migration. So try

  try the operation again.

  Environmental information:

  Source server:

  • Windows Server 2008 R2 with Service Pack 1
  • Roles: Domain Services Active Directory, DNS, DHCP, printing and service of documents, files, & network policy and Access Services
  • Discs: C:\(OS) & D:\(File Share)

  Destination server:

  • Windows Server 2008 R2 with Service Pack 1
  • Roles: Files, Hyper-V services (IIS) Web server
  • Discs: C:\(OS) & D:\(VHD Files)

  Information about the conversion:

  • Configuration of the volume: (selected Volumes-C:------, D:\ & disk: Partition 0: 0)
  • "Offline conversion" because of the following warning: disk hardware or the file system on the volume \\?\Volume{2dbb99c1-ba73-11de-97ae-806e6f6e6963}\: is not supported by Volume Shadow Copy Service.

  I don't know what the problem or prevent this from happening. Assistance in this matter is greatly appreciated. Thank you.

  Hi Christophe,

  According to the description looks like you have a problem with a particular program in Windows server 2008, I suggest you post this question in this forum for further assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this information helps. If you have questions about Windows do not hesitate to answer and we will be happy to help.

• Alternative to IIS6.0 as SMTP virtual server

  Hi all

  My company does a cloud-based mail filtering and our last jump internally is fundamentally a vanilla Windows server with IIS6.0 enabled for SMTP delivery to our customers, a receiving SMTP is used by our system to capture logging to a database for our customer portal. A similar setup is used to deliver outgoing messages for customers who use us for the relay.

  We have been asked on the TLS delivery, but not all customers want to implement and if I understand correctly, IIS6.0 essentially deals with TLS as an all or nothing, there is no other opportunistic choice.

  Is there another solution that I can use? Preference is another function/role I can activate the virtual SMTP service, or a complement of standard Windows that we can always use with SMTP sink for our logging.

  EDIT *.

  Posted in TechNet, here:

  https://social.technet.Microsoft.com/forums/en-us/d9637c6a-87de-4A53-bdf8-abcf70ff3c6d/alternative-to-iis60-as-SMTP-Virtual-Server?Forum=winserversetup

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• can I install virtual server 2005 R2 on windows vista family 32-bit

  Hello

  Please can you tell me if I can install virtual server 2005 R2 on windows vista 32-bit family, because I'm trying to do, but an error apears "virtual server not supported by windows vista" knowing I have install all IIS services

  Please give me a solution

  Thank you

  Hello Me force,

  I suggest posting your question on our TechNet forums located here:
  http://TechNet.Microsoft.com/en-us/virtualization/cc150661
  Thank you!

• Download Virtual Server 2005 or 2008 for a Windows Vista Home Premium x 64?

  I am new to computers and I am not informed on a lot of what happens, I have a laptop Dell Inspiron 1545 and I want to download MS Virtual Server 2005 R2 or 2008 version, I downloaded the 2008 or thought I did, but I couldn't find it in the files he had an icon on my desktop. I went back and unfortunately he's said anything it would download on Vista Home Premium OS, I found that it would work on a XP SP2 and I was wondering if I can download that and then download the server 05 ' or ' 08? Where can I get XP SP2?  Apparently it don't load Windows 7 is this true? I downloaded a version 2005 to see what will happen after the download, I got pop ups saying that a modified installation wizard my computer and to download it again as I did but I still cannot find the server on my computer. Any help would be helpful as to what I could do to use Virtual Server etc. the Ms. Merci a lot for any help.

  Hi dumdeedumdum,

  The question you have posted is associated with Windows server and would be better suited in the Windows Server forums.

  Please visit the link below to find a community that will support what ask you:

  http://social.msdn.Microsoft.com/forums/en-us/servervirtualization/threads

• Implementation of the small vFoglight Pro on virtual server?

  I install vFoglight Pro 6.5 in our environment. For the near future, it will monitor 3 vSphere ESX servers. Install on a virtual server would be ok or is it need a physical server?

  Hello Xafods,
  Even if you use a physical server is highly recommended, you can install vFoglight on a virtual machine that you allocate the necessary resources (as specified in the guide of the system configuration required) on the virtual machine to avoid performance problems.
  Concerning

• Licensing of Port on a MSE8000 can be converted to a virtual server of TP?

  I have a client with a MSE8000 with 80 port licenses and 2 x 8420 blades.

  They would like to go virtual; is there a provision for transforming these port licenses screen for a telepresence virtual server licenses?

  Thank you

  David

  The only way that you can convert the MCU licenses Telepresence license server is if you have a 5300 MCU series or MCU MSE 8510 blade, and it is through the process of installing the server TP on the MCU software, because the hardware can support.

• Installation of QPM 4.1 on Virtual server

  Hello

  Is it possible to run QPM 4.1 on a virtual server Windows 2003?

  ThanX

  Hi Neil,

  Answer - Yes.

  Reference http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_qos_policy_manager/4.1/installation/guide/windows/KIint.html#wp1127196

  Concerning

  Derek Clothier

• Failed to create the Conference on virtual server of telepresence

  Hi all

  I installed Virtual Server of telepresence and injected the LIC-AES-VTS-PMP-K9, LIC-VTS-PMP-INTOP, LIC-VTS-PMP-K9-LIC-VTS-PMPUWL-1SL. I wonder why I can't create the conference room. When I access the Conference menu, there is no button to create the Conference.

  Thank you.

  With virtual Server of telepresence that you will not be able to manage or create conferences directly on the server TP, you must use the conductor to create and set up conferences.  The virtual server TP is identical to the pluralistic media 310/320, to see how the virtual model differs from other models TP server, they are listed in the Cisco_TelePresence_Server_on_Virtual_Machine_Release_Notes_3-1 xbottom of pg 2.

  To learn more about the managed mode remote TelePresence Sever in use with the conductor, you can learn more on this subject in the Cisco_Telepresence_Server_Release_Notes_3-0_2-48, pg 2.

• APEX 5.0 Bug: apex.server.plugin pOptions is not defined

  When you call apex.server.plugin with just the identifier of the AJAX (i.e. no pData or pOptions) the following error occurs:

  TypeError: pOptions is undefined

  
  

  What happens in server.js on line 429...

  
  

  if ( pOptions.queue ) {

  
  

  As the docs says that pOptions is optional https://docs.Oracle.com/CD/E59726_01/doc.50/e39149/javascript_api.htm#AEAPI29511 , I think it is a bug.

  
  

  When passing to a JSON null pOptions, traverse AJAX request object (confirmed this via the logging on the server), however, there is an error on the page via an alert message. Example:

  
  

  apex.server.plugin(
    myAjaxIdentifier,
    {
      x01: 'test'
    },
    {}
  );
  

  
  

  The following error message is displayed in an alert message: error: parsererror - SyntaxError: JSON.parse: unexpected end of data to column 1 of line 1 of the JSON data

  Hi Martin,

  Thanks to and for reporting this bug. I entered a bug and we will try to fix it in a version of the patch. For now, labour is about to pass an empty object to pOptions. Regarding the error you get when you do this, take a look at the answer. It cannot be valid JSON. If the response data are not JSON or there is no response data (204 no content) then you will need to use pOptions to specify the response format using the dataType pOption property. See the jQuery for this doc.

  When I tried passing an empty object I don't have the parsererror.

  Thank you

  -John

• Is it permissible to install XE in a virtual server environment?

  Hello.

  I wonder if it is permitted to install XE in a virtual server environment (for example, the digital ocean droplets)

  as the specification for the virtual host is 1 CPU with 1 GB of RAM?

  Are there constraints based on licenses, because the 'drop' (= virtual server) probably works on a very

  more host (whose card I don't know)?

  Kind regards

  Matthias

  XE have been installed in many virtual environments such as Digital Ocean and Amazon Web Services. You can find many messages to blog about it. 11 g license Guide:

  Oracle Database Express Edition Oracle Database Express Edition (Oracle Database XE) is an edition of entry-level of Oracle database which is quick to download, simple to install and manage, and is free to develop, deploy and distribute. Oracle Database XE makes it easy to upgrade to other editions of Oracle without costly migration and complex. Oracle Database XE can be installed on any size machine with any number of CPUS, stores up to 11 GB of user data, using up to 1 GB of memory and using a single CPU on the host machine. Support is provided by an online forum.

  (The underlining is mine.) I think you'll install it wherever you want

• WebLogic 12 c on Solaris 10 virtual server

  I installed WebLogic 12 c on Solaris 10 virtual server.

  The server has 64 GB of RAM. and about 35 GB of swap space.

  When I try to increase the size of the segment of the managed server in weblogic than the segment size, it didn't start and tell me cannot allocate memory.

  I don't know why, he goes to the memory swap, although there is enough space on the RAM.

  I tried at my end and I see something similar to what you see. I think that the behavior works as expected.

  If you run prstat t see you RSS which is the real memory used.

  -bash - $3.2 prstat t

  NPROC USERNAME SWAP RSS MEMORY TIME CPU

  20G of oracle 19 904 M 1.4 05:13:40 % 0.0%

  1 smmsp K 3152 M 11 0.0% 0:02:07 0.0%

  1 M M 92 106, 0.2% 02:58:46 noaccess 0,0%

  6 demon 8824K 11M 0.0% 0:03:07 0.0%

  30 root 112M 125M 0.2% 0:38:07 0.0%

  SWAP is all the memory your process will use, in my case, my pile is 20 GB, and the memory used is 904 M.

  When your process will really need more memory RSS will increase.

  Vmstat shows memory free as much as you're ok

  for example

  -bash-3, $ 2 vmstat

  kthr memory page faults cpu disk

  r b o swap free re mf pi po fr sr s0 s1 s2 s3 in sy cs us sy id

  0 0 0 3 53843968 43066624 10 21 9 3 3 0 0 2 0-34 2123, 1614 1525 0 0 100

  43 GB in my case.

  References:

  https://docs.Oracle.com/CD/E19253-01/816-5166/prstat-1M/index.html

  https://docs.Oracle.com/CD/E19253-01/816-5165/PMAP-1/index.html

  Best regards

  Luz